- 06 Oct, 2012 34 commits
-
-
Lad, Prabhakar authored
from commit with id 896f38f5 it's mandatory to check the return code of vb2_queue_init(). Signed-off-by:
Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by:
Manjunath Hadli <manjunath.hadli@ti.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Lad, Prabhakar authored
vpif_display relied on a 1-1 mapping of output and subdev. This is not necessarily the case. Separate the two. So there is a list of subdevs and a list of outputs. Each output refers to a subdev and has routing information. An output does not have to have a subdev. The initial output for each channel is set to the fist output. Currently missing is support for associating multiple subdevs with an output. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Hans Verkuil authored
The s_routing function should not try to detect a signal. It is a really bad idea to try to detect a valid video signal and return an error if you can't. Changing input should do just that and nothing more. Also don't power on the ADCs on s_routing, instead do that on querystd. Signed-off-by:
-
Hans Verkuil authored
struct vpif_interface is channel specific, not subdev specific. Move it to the channel config. Signed-off-by:
-
Hans Verkuil authored
This makes it easier to have outputs without subdevs. This needs more work. The way the outputs are configured should be identical to how inputs are configured. Signed-off-by:
-
Hans Verkuil authored
vpif_capture relied on a 1-1 mapping of input and subdev. This is not necessarily the case. Separate the two. So there is a list of subdevs and a list of inputs. Each input refers to a subdev and has routing information. An input does not have to have a subdev. The initial input for each channel is set to the fist input. Currently missing is support for associating multiple subdevs with an input. Signed-off-by:
-
Hans Verkuil authored
The cleanup sequence was incorrect and could cause a kernel oops. Signed-off-by:
-
Hans Verkuil authored
The cleanup sequence was incorrect and could cause a kernel oops. Signed-off-by:
-
Hans Verkuil authored
When device nodes are registered they must be ready for use immediately, so make sure the subdevs are loaded first. Signed-off-by:
-
Hans Verkuil authored
When device nodes are registered they must be ready for use immediately, so make sure the subdevs are loaded first. Signed-off-by:
-
Hans Verkuil authored
Routing information is a property of the input, not of the subdev. One subdev may provide multiple inputs, each with its own routing information. Signed-off-by:
-
Hans Verkuil authored
Calling a subdev op that isn't implemented will just return -ENOIOCTLCMD No need to have a flag for that. Signed-off-by:
-
Hans Verkuil authored
The output index does not belong to video_obj, it belongs to channel_obj. Also rename to output_idx to be consistent with the input_idx name used in vpif_capture. Signed-off-by:
-
Hans Verkuil authored
input_idx does not belong to video_obj. Move it where it belongs. Also remove the bogus code in the open() function that suddenly changes the input to 0 for no reason. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Manjunath Hadli authored
Include the expander settings to select VPIF peripheral on UI card and add registration call in EVM init. Also add platform data to configure display and capture devices. Signed-off-by:
-
Manjunath Hadli authored
Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by:
-
Lad, Prabhakar authored
for da850/omap-l138, there is no need to setup_input_channel_mode() and set_clock(), to avoid adding dummy code in board file just returning zero add a check in the driver itself to call the handler only if its not NULL. Signed-off-by:
-
Hans Verkuil authored
drivers/media/platform/fsl-viu.c: In function 'vidioc_s_fbuf': drivers/media/platform/fsl-viu.c:867:32: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] This is fall-out from this commit: commit e6eb28c2 Author: Hans Verkuil <hans.verkuil@cisco.com> [media] v4l2: make vidioc_s_fbuf const Signed-off-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
-
Lad, Prabhakar authored
V4L2_CID_TEST_PATTERN is now a standard control. This patch replaces the user defined control for test pattern to make use of standard control V4L2_CID_TEST_PATTERN. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Lad, Prabhakar authored
Add helper function v4l2_ctrl_new_std_menu_items(), which adds a standard menu control, with driver specific menu. Signed-off-by:
-
Lad, Prabhakar authored
add V4L2_CID_TEST_PATTERN of type menu, which determines the internal test pattern selected by the device. Signed-off-by:
-
Sylwester Nawrocki authored
.get_frame_desc can be used by host interface driver to query properties of captured frames, e.g. required memory buffer size. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
The V4L2_PIX_FMT_S5C_YUYV_JPG image formats consists of 2 planes, the first containing interleaved JPEG/YUYV data and the second containing meta data describing the interleaving method. The image data is transferred with MIPI-CSI "User Defined Byte-Based Data 1" type and is captured to memory by FIMC DMA engine. The meta data is transferred using MIPI-CSI2 "Embedded 8-bit non Image Data" and it is captured in the MIPI-CSI slave device and copied to the bridge provided buffer. To make sure the size of allocated buffers is correct for the subdevs configuration when VIDIOC_STREAMON ioctl is invoked, an additional check is added at the video pipeline validation function. Flag FMT_FLAGS_COMPRESSED indicates the buffer size must be retrieved from a sensor subdev. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
MIPI-CSI has internal memory mapped buffers for the frame embedded (non-image) data. There are two buffers, for even and odd frames which need to be saved after an interrupt is raised. The packet data buffers size is 4 KiB and there is no status register in the hardware where the actual non-image data size can be read from. Hence the driver copies whole packet data buffer into a buffer provided by the FIMC driver. This will form a separate plane in the user buffer. When FIMC DMA engine is stopped by the driver due the to user space not keeping up with buffer de-queuing the MIPI-CSIS will still run, however it must discard data which is not captured by FIMC. Which frames are actually capture by MIPI-CSIS is determined by means of the s_tx_buffer subdev callback. When it is not called after a single embedded data frame has been captured and copied and before next embedded data frame interrupt occurrs, subsequent embedded data frames will be dropped. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds definition of the Samsung S5C73M3 camera specific image format. V4L2_PIX_FMT_S5C_UYVY_JPG is a two-planar format, the first plane contains interleaved UYVY and JPEG data followed by meta-data. The second plane contains additional meta-data needed for extracting JPEG and UYVY data stream from the first plane. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds media bus pixel code for the interleaved JPEG/UYVY image format used by S5C73MX Samsung cameras. This interleaved image data is transferred on MIPI-CSI2 bus as User Defined Byte-based Data. It also defines an experimental vendor and device specific media bus formats section and adds related DocBook documentation. Signed-off-by:
-
Sylwester Nawrocki authored
Add subdev callbacks for setting up parameters of the frame on media bus that are not exposed to user space directly. This is just an initial, mostly stub implementation. struct v4l2_mbus_frame_desc is intended to be extended with sub-structures specific to a particular hardware media bus. For now these new callbacks are used only to query or specify maximum size of a compressed or hybrid (container) media bus frame in octets. Signed-off-by:
-
Sylwester Nawrocki authored
The s_rx_buffer callback allows the host to set buffer for a data being received by the subdev, e.g. non-image frame (meta) data. This callback can be implemented by subdevice like a MIPI CSI2 receiver, allowing the host driver to gather additional data into frame buffer passed to user space. Signed-off-by:
-
Hans Verkuil authored
drivers/media/platform/s5p-fimc/fimc-m2m.c:561:2: warning: passing argument 2 of 'fimc_m2m_try_crop' discards 'const' qualifier from pointer target type [enabled by default] drivers/media/platform/s5p-fimc/fimc-m2m.c:502:12: note: expected 'struct v4l2_crop *' but argument is of type 'const struct v4l2_crop *' This is fall-out from this commit: commit 4f996594 Author: Hans Verkuil <hans.verkuil@cisco.com> [media] v4l2: make vidioc_s_crop const Signed-off-by:
-
Hans Verkuil authored
drivers/media/platform/s5p-g2d/g2d.c:535:2: warning: passing argument 3 of 'vidioc_try_crop' discards 'const' qualifier from pointer target type [enabled by default] drivers/media/platform/s5p-g2d/g2d.c:510:12: note: expected 'struct v4l2_crop *' but argument is of type 'const struct v4l2_crop *' This is fall-out from this commit: commit 4f996594 Author: Hans Verkuil <hans.verkuil@cisco.com> [media] v4l2: make vidioc_s_crop const Signed-off-by:
-
Thomas Abraham authored
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
-
Patrick Boettcher authored
This patch adds a module-device-table-entry to the technisat-usb2-driver which will help udev to on-demand load the driver. This was obviously forgotten during initial commit. Signed-off-by:
Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by:
-
- 05 Oct, 2012 6 commits
-
-
Lad, Prabhakar authored
This patch replaces V4L2_OUT_CAP_CUSTOM_TIMINGS macro with V4L2_OUT_CAP_DV_TIMINGS. As V4L2_OUT_CAP_CUSTOM_TIMINGS is being phased out. Signed-off-by:
-
Lad, Prabhakar authored
recent patch with commit id 4f996594 which makes vidioc_s_crop const, was causing a following build warning, vpbe_display.c: In function 'vpbe_display_s_crop': vpbe_display.c:640: warning: initialization discards qualifiers from pointer target type This patch fixes the above build warning. Signed-off-by:
-
Manjunath Hadli authored
add filter settings for high def modes like 1080i, 1080p,720p and others and implementing dv_timings. Signed-off-by:
-
Hans Verkuil authored
This patch replaces the preset API by the timings API, and appropriate changes in board file. Signed-off-by:
-
Hans-Frieder Vogt authored
As spotted by Dan Carpenter <dan.carpenter@oracle.com> (thanks!), we have improperly used an unsigned variable in a calculation that may result in a negative number. This may cause an unintended underflow if the interface frequency of the tuner is > approx. 40MHz. This patch should resolve the issue, following an approach similar to what is used in af9013.c. [crope@iki.fi: add Reported-by] Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Hans-Frieder Vogt <hfvogt@gmx.net> Reviewed-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Lad, Prabhakar authored
recent patch with commit id 4f996594 which makes vidioc_s_crop const, was causing a following build error. vpfe_capture.c: In function 'vpfe_s_crop': vpfe_capture.c:1695: error: assignment of read-only location '*crop' vpfe_capture.c:1706: warning: passing argument 1 of 'ccdc_dev->hw_ops.set_image_window' discards qualifiers from pointer target type vpfe_capture.c:1706: note: expected 'struct v4l2_rect *' but argument is of type 'const struct v4l2_rect *' make[4]: *** [drivers/media/platform/davinci/vpfe_capture.o] Error 1 Signed-off-by:
-
