- 29 Dec, 2010 40 commits
-
-
Jean-François Moine authored
Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
- start and stop streaming are done via the FRAR - streaming suspend (for control change) is done by video reset Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
- move hexadecimal value to lowercase - remove/add empty lines and spaces - comment unused macros - change some comments Signed-off-by:
-
Nicolas Kaiser authored
It looks to me like it was intended to check the return value at this point. Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
-
Jean-François Moine authored
This patch also checks if the sensor is well detected at connection time. Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Hans de Goede authored
stv06xx devices have only one altsetting, but the actual used bandwidth can be programmed through a register. We were already setting this register lower then the max packetsize of the altsetting indicates. This patch makes the gspca-stv06xx update the usb descriptor for the alt setting to reflect the actual packetsize in use, so that the usb subsystem uses the correct information for scheduling usb transfers. This patch also tries to fallback to lower speeds in case a ENOSPC error is received when submitting urbs, but currently this is only supported with stv06xx cams with the pb0100 sensor, as this is the only one for which we know how to change the framerate. This patch is based on an initial incomplete patch by Lee Jones <lee.jones@canonical.com> Signed-off-by:
Lee Jones <lee.jones@canonical.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Steven Toth authored
Checkpatch compliance cleanup across files in the saa7164 driver. Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Dan Carpenter authored
This isn't a runtime bug, it's just to make static checkers happy. In vidioc_querycap() we copy a saa7164_dev ->name driver array into a v4l2_capability -> driver array. The ->driver array is only 16 chars long so ->name also can't be more than 16 characters. The ->name gets set in v4l2_capability() and it always is less than 16 characters so we can easily make the buffer smaller. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Axel Lin authored
If the adapter does not support I2C_FUNC_SMBUS_WRITE_BYTE, return -EIO instead of 0. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Joe Perches authored
Add missing newlines. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
VDR User authored
This patch adds retrieval of firmware and FPGA versions of Genpix devices. That information is useful for users who experience performance differences with the various firmware versions, and may want to use a specific firmware that best suits their needs. Example dmesg output: gp8psk: FW Version = 2.09.4 (0x20904) Build 2009/04/02 gp8psk: FPGA Version = 1 Signed-off-by:
Derek Kelly <user.vdr@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
There was a bug at cx231xx-input, where it were registering the remote controls twice, one via ir-kbd-i2c and another directly. Also, the patch that added rc_register_device() broke compilation for it. This patch fixes cx231xx-input by fixing the depends on, to point to the new symbol, and initializing the scanmask via platform_data. While here, also fix Kconfig symbol change for IR core dependencies. Signed-off-by: -
Mauro Carvalho Chehab authored
There are several fields on rc_dev that drivers can benefit. Allow drivers to pass it as a parameter to the driver. For now, the rc_dev parameter is optional. If drivers don't pass it, create them internally. However, the best is to create rc_dev inside the drivers, in order to fill other fields, like open(), close(), driver_name, etc. So, a latter patch making it mandatory and changing the caller drivers is welcome. Signed-off-by: -
David Härdeman authored
Move winbond-cir from drivers/input/misc/ into drivers/media/rc/ and convert it to use rc-core. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
David Härdeman authored
This patch merges the ir_input_dev and ir_dev_props structs into a single struct called rc_dev. The drivers and various functions in rc-core used by the drivers are also changed to use rc_dev as the primary interface when dealing with rc-core. This means that the input_dev is abstracted away from the drivers which is necessary if we ever want to support multiple input devs per rc device. The new API is similar to what the input subsystem uses, i.e: rc_device_alloc() rc_device_free() rc_device_register() rc_device_unregister() [mchehab@redhat.com: Fix compilation on mceusb and cx231xx, due to merge conflicts] Signed-off-by:
Jarod Wilson <jarod@redhat.com> Tested-by:
-
David Härdeman authored
[mchehab@redhat.com: this patch were originally bundled with some renaming stuff and with the file merges, as seen at: https://patchwork.kernel.org/patch/291092/. Instead of using the original approach, I wrote the rename patches and the code merge as separate changes, then applied the difference on this patch. This way, it is easier to see the real changes at the code, and will be easier to merge upstream, especially if some conflict rises on the renaming patches] Signed-off-by:
-
Mauro Carvalho Chehab authored
With this change, all rc-core functions are into just one file, except for the rc-raw specific functions. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
As protocol decoders are specific to InfraRed, keep their names as-is. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
David Härdeman authored
cx88 only depends on VIDEO_IR because it needs ir_extract_bits(). Move that function to ir-core.h and make it inline. Lots of drivers had dependencies on VIDEO_IR when they really wanted IR_CORE. The only remaining drivers to depend on VIDEO_IR are bt8xx and saa7134 (ir_rc5_timer_end is the only function exported by ir-functions). Rename VIDEO_IR -> IR_LEGACY to give a hint to anyone writing or converting drivers to IR_CORE that they do not want a dependency on IR_LEGACY. Signed-off-by:
-
David Härdeman authored
This patch removes the remaining usages of the ir_input_nokey() and ir_input_keydown() functions provided by drivers/media/IR/ir-functions.c by using the corresponding functionality in ir-core instead. Signed-off-by:
-
David Härdeman authored
This patch converts the cx88 driver (for sampling hw) to use the decoders provided by ir-core instead of the separate ones provided by ir-functions (and gets rid of those). The value for MO_DDS_IO had a comment saying it corresponded to a 4kHz samplerate. That comment was unfortunately misleading. The actual samplerate was something like 3250Hz. The current value has been derived by analyzing the elapsed time between interrupts for different values (knowing that each interrupt corresponds to 32 samples). Thanks to Mariusz Bialonczyk <manio@skyboo.net> for testing my patches (about one a day for two weeks!) on actual hardware. Signed-off-by:
-
Jarkko Nikula authored
Convert the driver to use regulator framework instead of set_power callback. This with gpio_reset platform data provide cleaner way to manage chip VIO, VDD and reset signal inside the driver. Signed-off-by:
Jarkko Nikula <jhnikula@gmail.com> Cc: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by:
-
Devin Heitmueller authored
Because some clients (e.g. tvtime) will just open the filehandle and call read() instead of explicitly calling streamon first, we need to make sure the VBI timeout routine gets enabled in this case. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
The first pass of fixes to cause the driver to continue streaming even when there is no video arriving over the ITU656 bus were not adequate. Continue the work from the previous patch. Signed-off-by:
-
Devin Heitmueller authored
We need the au0828 to continue delivering frames even when the device is not delivering video, or else applications such as tvtime will block indefinitely. Unfortunately, the au8522 doesn't have any sort of free-running mode or "blue screen on no video" like some other decoders. This work was sponsored by GetWellNetwork Inc. Signed-off-by:
-
Devin Heitmueller authored
Tweak the comb filter config when in s-video mode to match the Hauppauge Windows driver values (based on register dumps). This work was sponsored by GetWellNetwork Inc. Signed-off-by:
-
Devin Heitmueller authored
Straighten out the clamp control configurations for the various video modes, based off of register diffs done against the Hauppauge Windows driver. This work was sponsored by GetWellNetwork Inc. Signed-off-by:
-
Devin Heitmueller authored
Cleanup the routine which disables the audio decoder. In particular, the i2s output was being shut off but the audio processor itself was not, resulting in more power being consumed than needed. Signed-off-by:
-
