- 27 Mar, 2006 40 commits
-
-
NeilBrown authored
The remainder of this batch implements raid5 reshaping. Currently the only shape change that is supported is added a device, but it is envisioned that changing the chunksize and layout will also be supported, as well as changing the level (e.g. 1->5, 5->6). The reshape process naturally has to move all of the data in the array, and so should be used with caution. It is believed to work, and some testing does support this, but wider testing would be great for increasing my confidence. You will need a version of mdadm newer than 2.3.1 to make use of raid5 growth. This is because mdadm need to take a copy of a 'critical section' at the start of the array incase there is a crash at an awkward moment. On restart, mdadm will restore the critical section and allow reshape to continue. I hope to release a 2.4-pre by early next week - it still needs a little more polishing. This patch: Previously the array of disk information was included in the raid5 'conf' structure which was allocated to an appropriate size. This makes it awkward to change the size of that array. So we split it off into a separate kmalloced array which will require a little extra indexing, but is much easier to grow. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
status_resync - used by /proc/mdstat to report the status of a resync, assumes that device sizes will always fit into an 'unsigned long' This is no longer the case... Signed-off-by:
-
NeilBrown authored
We are counting failed devices twice, once of the device that is failed, and once for the hole that has been left in the array. Remove the former so 'failed' matches 'missing'. Storing these counts in the superblock is a bit silly anyway.... Signed-off-by:
-
NeilBrown authored
I really should make this a function of the personality.... Signed-off-by:
-
NeilBrown authored
This flag should be set for a virtual device iff it is set for all underlying devices. Signed-off-by:
-
Kevin Corry authored
Signed-off-by:
Kevin Corry <kevcorry@us.ibm.com> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Jun'ichi Nomura authored
Convert bd_sem to bd_mutex Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Jun'ichi Nomura authored
Use bd_claim_by_disk. Following symlinks are created if dm-0 maps to sda: /sys/block/dm-0/slaves/sda --> /sys/block/sda /sys/block/sda/holders/dm-0 --> /sys/block/dm-0 Signed-off-by:
-
Jun'ichi Nomura authored
Use bd_claim_by_disk. Following symlinks are created if md0 is built from sda and sdb /sys/block/md0/slaves/sda --> /sys/block/sda /sys/block/md0/slaves/sdb --> /sys/block/sdb /sys/block/sda/holders/md0 --> /sys/block/md0 /sys/block/sdb/holders/md0 --> /sys/block/md0 Signed-off-by:
-
Jun'ichi Nomura authored
Adding bd_claim_by_kobject() function which takes kobject as additional signature of holder device and creates sysfs symlinks between holder device and claimed device. bd_release_from_kobject() is a counterpart of bd_claim_by_kobject. Signed-off-by:
-
Andrew Morton authored
Remove all the CONFIG_SYSFS stuff. That's supposed to all be implemented up in header files. Yes, the CONFIG_SYSFS=n data structures will be a little larger than necessary, but that's a tradeoff we can decide to make. Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Jun'ichi Nomura authored
Creating "slaves" and "holders" directories in /sys/block/<disk> and creating "holders" directory under /sys/block/<disk>/<partition> Signed-off-by:
-
Darrick J. Wong authored
Allow drive geometry to be stored with a new DM_DEV_SET_GEOMETRY ioctl. Device-mapper will now respond to HDIO_GETGEO. If the geometry information is not available, zero will be returned for all of the parameters. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Mike Anderson authored
Store an up-pointer to the owning struct mapped_device in every table when it is created. Access it with: struct mapped_device *dm_table_get_md(struct dm_table *t) Tables linked to md must be destroyed before the md itself. Signed-off-by:
Mike Anderson <andmike@us.ibm.com> Signed-off-by:
-
Alasdair G Kergon authored
Change dm_get_mdptr() to take a struct mapped_device instead of dev_t. Signed-off-by:
-
Mike Anderson authored
The patch stores a printable device number in struct mapped_device for use in warning messages and with a proposed netlink interface. Signed-off-by:
-
Jun'ichi Nomura authored
If dm_suspend() is cancelled, bios already added to the deferred list need to be submitted. Otherwise they remain 'in limbo' until there's a dm_resume(). Signed-off-by:
-
Alasdair G Kergon authored
Before removing a snapshot, wait for the completion of any kcopyd jobs using it. Do this by maintaining a count (nr_jobs) of how many outstanding jobs each kcopyd_client has. The snapshot destructor first unregisters the snapshot so that no new kcopyd jobs (created by writes to the origin) will reference that particular snapshot. kcopyd_client_destroy() is now run next to wait for the completion of any outstanding jobs before the snapshot exception structures (that those jobs reference) are freed. Signed-off-by:
-
NeilBrown authored
This flag should be set for a virtual device iff it is set for all underlying devices. Signed-off-by:
-
Andrew Morton authored
We don't know what type sector_t has. Sometimes it's unsigned long, sometimes it's unsigned long long. For example on ppc64 it's unsigned long with CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n. The way to handle all of this is to always use unsigned long long and to always typecast the sector_t when printing it. Acked-by:
-
Jun'ichi Nomura authored
dm-mirror has potential data corruption problem: while on-disk log shows that all disk contents are in-sync, actual contents of the disks are not synchronized. This problem occurs if initial recovery (synching) is interrupted and resumed. Attached patch fixes this problem. Background: rh_dec() changes the region state from RH_NOSYNC (out-of-sync) to RH_CLEAN (in-sync), which results in the corresponding bit of clean_bits being set. This is harmful if on-disk log is used and the map is removed/suspended before the initial sync is completed. The clean_bits is written down to the on-disk log at the map removal, and, upon resume, it's read and copied to sync_bits. Since the recovery process refers to the sync_bits to find a region to be recovered, the region whose state was changed from RH_NOSYNC to RH_CLEAN is no longer recovered. If you haven't applied dm-raid1-read-balancing.patch proposed in dm-devel sometimes ago, the contents of the mirrored disk just corrupt silently. If you have, balanced read may get bogus data from out-of-sync disks. The patch keeps RH_NOSYNC state unchanged. It will be changed to RH_RECOVERING when recovery starts and get reclaimed when the recovery completes. So it doesn't leak the region hash entry. Description: Keep RH_NOSYNC state unchanged when I/O on the region completes. rh_dec() changes the region state from RH_NOSYNC (out-of-sync) to RH_CLEAN (in-sync), which results in the corresponding bit of clean_bits being set. This is harmful if on-disk log is used and the map is removed/suspended before the initial sync is completed. The clean_bits is written down to the on-disk log at the map removal, and, upon resume, it's read and copied to sync_bits. Since the recovery process refers to the sync_bits to find a region to be recovered, the region whose state was changed from RH_NOSYNC to RH_CLEAN is no longer recovered. If you haven't applied dm-raid1-read-balancing.patch proposed in dm-devel sometimes ago, the contents of the mirrored disk just corrupt silently. If you have, balanced read may get bogus data from out-of-sync disks. The RH_NOSYNC region will be changed to RH_RECOVERING when recovery starts on the region and get reclaimed when the recovery completes. So it doesn't leak the region hash entry. Alasdair said: I've analysed the relevant part of the state machine and I believe that the patch is correct. (Further work on this code is still needed - this patch has the side-effect of holding onto memory unnecessarily for long periods of time under certain workloads - but better that than corrupting data.) Signed-off-by:
-
Alasdair G Kergon authored
When a snapshot becomes invalid, s->valid is set to 0. In this state, a snapshot can no longer be accessed. When s->lock is acquired, before doing anything else, s->valid must be checked to ensure the snapshot remains valid. This patch eliminates some races (that may cause panics) by adding some missing checks. At the same time, some unnecessary levels of indentation are removed and snapshot invalidation is moved into a single function that always generates a device-mapper event. Signed-off-by:
-
Alasdair G Kergon authored
The siblings "list" is used unsafely at the moment. Firstly, only the element on the list being changed gets locked (via the snapshot lock), not the next and previous elements which have pointers that are also being changed. Secondly, if you have two or more snapshots and write to the same chunk a second time before every snapshot has finished making its private copy of the data, if you're unlucky, _origin_write() could attempt its list_merge() and dereference a 'last' pointer to a pending_exception structure that has just been freed. Analysis reveals that the list is actually only there for reference counting. If 5 pending_exceptions are needed in origin_write, then the 5 are joined together into a 5-element list - without a separate list head because there's nowhere suitable to store it. As the pending_exceptions complete, they are removed from the list one-by-one and any contents of origin_bios get moved across to one of the remaining pending_exceptions on the list. Whichever one is last is detected because list_empty() is then true and the origin_bios get submitted. The fix proposed here uses an alternative reference counting mechanism by choosing one of the pending_exceptions as primary and maintaining an atomic counter there. Signed-off-by:
-
Alasdair G Kergon authored
Say you have several snapshots of the same origin and then you issue a write to some place in the origin for the first time. Before the device-mapper snapshot target lets the write go through to the underlying device, it needs to make a copy of the data that is about to be overwritten. Each snapshot is independent, so it makes one copy for each snapshot. __origin_write() loops through each snapshot and checks to see whether a copy is needed for that snapshot. (A copy is only needed the first time that data changes.) If a copy is needed, the code allocates a 'pending_exception' structure holding the details. It links these together for all the snapshots, then works its way through this list and submits the copying requests to the kcopyd thread by calling start_copy(). When each request is completed, the original pending_exception structure gets freed in pending_complete(). If you're very unlucky, this structure can get freed *before* the submission process has finished walking the list. This patch: 1) Creates a new temporary list pe_queue to hold the pending exception structures; 2) Does all the bookkeeping up-front, then walks through the new list safely and calls start_copy() for each pending_exception that needed it; 3) Avoids attempting to add pe->siblings to the list if it's already connected. [NB This does not fix all the races in this code. More patches will follow.] Signed-off-by: -
Adrian Bunk authored
The Coverity checker spotted these two unused variables. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by:
-
Tobias Klauser authored
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of ARRAY_SIZE. Some coding style and trailing whitespaces are also fixed. Compile-tested where possible (some are other arch or BROKEN) Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Olaf Hering authored
Add a modeline for the Philips 200W display. aty128fb does not do DDC, it picks 1920x1440 or similar. It works ok with nvidiafb because it can ask for DDC data. mode "1680x1050-60" # D: 146.028 MHz, H: 65.191 kHz, V: 59.863 Hz geometry 1680 1050 1680 1050 16 timings 6848 280 104 30 3 176 6 hsync high vsync high rgba 5/11,6/5,5/0,0/0 endmode hwinfo --monitor 20: None 00.0: 10000 Monitor [Created at monitor.206] Unique ID: rdCR.pzUFTofo1S4 Parent ID: 002j.bJRsY88eNSC Hardware Class: monitor Model: "PHILIPS Philips 200W" Vendor: PHL "PHILIPS" Device: eisa 0x0832 "Philips 200W" Serial ID: "VN 016596" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1152x864@70Hz Resolution: 1152x864@75Hz Resolution: 1280x960@60Hz Resolution: 1280x1024@60Hz Resolution: 1680x1050@60Hz Size: 433x271 mm Driver Info #0: Max. Resolution: 1680x1050 Vert. Sync Range: 56-85 Hz Hor. Sync Range: 30-93 kHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (VGA compatible controller) Signed-off-by:Olaf Hering <olh@suse.de> Acked-by:
"Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Ralf Baechle authored
There are more sparse warnings but fixing those will require some more work than I want to do without hardware for testing at hand. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Pavel Roskin authored
Quadro NVS280 is a dual-head PCIe card with PCI ID 10de:00fd and subsystem ID 10de:0215. Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Antonino A. Daplas authored
clk_p is always 0. Coverity Bug 67 Signed-off-by:
-
Antonino A. Daplas authored
Remove code that can never be reached. Coverity Bug 67 Signed-off-by:
-
Antonino A. Daplas authored
Remove unnecessary NULL check. Signed-off-by:
-
Antonino A. Daplas authored
Remove unnecessary NULL check. Being a function private to the driver, out_edid can never be NULL. Signed-off-by:
-
Antonino A. Daplas authored
Remove unnecessary NULL check. Signed-off-by:
-
Antonino A. Daplas authored
Remove unnecessary NULL check, as struct info will never be NULL. Coverity Bug 835 Signed-off-by:
-
Antonino A. Daplas authored
Remove unnecessary NULL check, as struct info will never be NULL. Coverity Bug 836 Signed-off-by:
-
Alan Curry authored
A set of 3 small bugfixes, all of which are related to bogus return values of fb colormap-setting functions. First, fb_alloc_cmap returns -1 if memory allocation fails. This is a hard condition to reproduce since you'd have to be really low on memory, but from studying the contexts in which it is called, I think this function should be returning a negative errno, and the -1 will be seen as an EPERM. Switching it to -ENOMEM makes sense. Second, the store_cmap function which is called for writes to /sys/class/graphics/fb0/color_map returns 0 for success, but it should be returning the count of bytes written since its return value ends up in userspace as the result of the write() syscall. Third, radeonfb returns 1 instead of a negative errno when FBIOPUTCMAP is called with an oversized colormap. This is seen in userspace as a return value of 1 from the ioctl() syscall with errno left unchanged. A more useful return value would be -EINVAL. Signed-off-by:
Alan Curry <pacman@TheWorld.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Antonino A. Daplas authored
DDC reading via the Video BIOS may take several tens of seconds with some combination of display cards and monitors. Make this option configurable. It defaults to `y' to minimise disruption. Signed-off-by:
-
Ralf Baechle authored
Add support for Alchemy Au1200 framebuffer driver Signed-off-by:
-
Jean Delvare authored
A few cleanups which were done to almost all i2c drivers some times ago, but matroxfb_maven was forgotten: * Don't allocate two different structures at once. * Use kzalloc instead of kmalloc+memset. * Use strlcpy instead of strcpy. * Drop duplicate error message on client deregistration failure. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Petr Vandrovec <vandrove@vc.cvut.cz> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
