Fixed a potential memory leak inside skb_ether_to_p80211()
	When the wep_encrypt() fails  the code return 2 directly
	Which causes the p80211_wep->data dangling

Add a kfree statement to reclaim that memory allocated
Signed-off-by: Lynn Lei <lynnl.yet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethernet-rx.c:

fix WARNING: line over 80 characters

The code was restructured a bit, a helper function
was added to cvm_oct_poll.
Signed-off-by: John Smith <catalinnow@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch issues:
ERROR: that open brace { should be on the previous line.
WARNING: braces {} are not necessary for single statement blocks.
Signed-off-by: Teo Dacquet <teo.dacquet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

WARNING: line over 80 characters
WARNING: static const char * array should probably be static const char * const
CHECK: Unnecessary parentheses around hal_data->odmpriv
Signed-off-by: Tom Gardi <gardi@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According to the coding-style documentation, spaces are required
around most binary and ternary operators. Spaces were added to
fix mulitple coding-style errors.
Signed-off-by: Christoffer Kjoelbaek <christoffer@kjoelbaek.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These vb2_ops structures are only stored in the ops field of a
vb2_queue structure, which is declared as const.  Thus the vb2_ops
structures themselves can be const.

Done with the help of Coccinelle.

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct vb2_ops i@p = { ... };

@ok@
identifier r.i;
struct vb2_queue e;
position p;
@@
e.ops = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct vb2_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct vb2_ops i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 9a5a6911 as it
causes unneeded build warnings :(
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: JB Van Puyvelde <jbvanpuyvelde@gmail.com>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

At present, TCPM does not take into account the actual resistor
value presented in the CC line and therefore reports TYPEC_PWR_MODE_USB
irrespective of the power_op_mode it is in.
This patch makes TCPM consider the actual value of Rp.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[  130.893355] state change SNK_DEBOUNCED -> SRC_TRY
[  130.893363] cc:=3
[  130.893490] pending state change SRC_TRY -> SNK_TRYWAIT @ 100 ms
[  130.895602] CC1: 3 -> 0, CC2: 0 -> 0 [state SRC_TRY, polarity 0, disconnected]
[  130.895613] state change SRC_TRY -> SRC_TRY_DEBOUNCE
[  130.895621] pending state change SRC_TRY_DEBOUNCE -> SRC_ATTACHED @ 20 ms
[  130.916843] state change SRC_TRY_DEBOUNCE -> SRC_ATTACHED [delayed 20 ms]

Although the CC state was changing to TYPEC_CC_OPEN, the port entered
SRC_TRY_DEBOUNCE from SRC_TRY. The port must enter SRC_TRY_DEBOUNCE only
if the CC state is TYPEC_CC_RD.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
[groeck: Wording]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the partner is not PD capable, we can not use a power role set request
to swap roles. Use the data role set request instead.

Also, if a partner is not PD capable, it does not really make sense to send
a PD message to trigger a role swap. On top of that, we should really wait
for the attempted role change to complete. Otherwise, it may well be that
user space requests another role change immediately afterwards which will
fail because the port is not yet in ready state.

Trigger the role swap from data role change requests and introduce new
state PORT_RESET and use it to solve the problem. This new state is
mostly identical to ERROR_RECOVERY, only it does not cause a pending
role change to fail. Use this new state also when initializing the driver.
Rename ERROR_RECOVERY_WAIT_OFF to PORT_RESET_WAIT_OFF to better reflect
its new meaning.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Type-C protocol manager state machine could fail, which might result
in role swap requests from user space to hang forever. Add a generous
timeout when waiting for role swaps to complete to avoid this situation.

Originally-from: Badhri Jagan Sridharan <badhri@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcpm_default_state wasn't considering the port type when determining the
default role. This change makes tcpm_default_state to consider port type
as well.

tcpm_default_state would return the following based on the port type:
TYPEC_PORT_UFP - SNK_UNATTACHED
TYPEC_PORT_DFP - SRC_UNATTACHED
TYPEC_PORT_DRP - based on the preferred_role setting
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
[groeck: Reworded description; minor formatting changes]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

While exiting ERROR_RECOVERY, choose default state based on the port
type instead of current power role.

Quoting from specification:

4.5.2.2.2 ErrorRecovery State
This state appears in Figure 4-12, Figure 4-13, Figure 4-14, Figure 4-15,
Figure 4-16 and Figure 4-17.
The ErrorRecovery state is where the port removes the terminations from
the CC1 and CC2 pins for tErrorRecovery followed by transitioning to the
appropriate Unattached.SNK or Unattached.SRC state based on port type.
This is the equivalent of forcing a detach event and looking for a new
attach.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Role swap requests fail unless the current role is either SRC_READY or
SNK_READY. This works fine for VCONN and data role swaps, where we
immediately enter READY state after reporting a successful role swap
to user space. However, on power role changes, the role swap is currently
reported as successful while power negotiation is still in process.
User space does not know this, and may request another role swap
immediately after a power role swap is reported to be complete.
This second role swap will fail with -EAGAIN.

To fix the problem, report role swap completion after power negotiation
is complete and the state machine enters SRC_READY or SNK_READY state.
This is better anyway since it captures errors due to failed power
negotiations. It also simplifies the code since the number of calls
needed to report successful role swaps is reduced.
Reported-by: Howard Yen <howard_yen@htc.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Constify alternate mode configuration data which won't be touched
by the driver.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following macro:
\#define INVALID_PARAM
	{ \
                dev_dbg(&spi->dev, "set: illegal input param"); \
                return -EINVAL; \
        }
affects control flow by having return statement. This is against
Linux Kernel Coding Style and should be avoided and therefore
this macro is replaced by inline code.

Additionally following 3 minor issues:

ERROR: code indent should use tabs where possible
ERROR: spaces required around that '!=' (ctx:VxV)
ERROR: space prohibited before that close parenthesis ')'

were fiexed inline.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparse reports the following warning  "warning: dubious: x & !y".
Replaced te logical not with bitwise to resolve the warning
Signed-off-by: Quentin Swain <dudebrobro179@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code that was not doing anything
sensible anyway.
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On driver cleanup we need to call fb_deferred_io_cleanup() if build
with CONFIG_FB_DEFERRED_IO set.
Suggested-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Patches for the vboxvideo driver should also be Cc-ed to dri-devel,
update the TODO file accordingly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() adn should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vboxvideo code uses various ttm_* functions, so it needs
"drivers/gpu/drm/ttm/*" to be built. In order to build these objects
select DRM_TTM.

This commit fixes "ttm_*" undefined build errors.
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes 9 checkpatch.pl warnings of type
"Prefer kmalloc(sizeof(variable)...) over kmalloc(sizeof(type)...)"
in staging/ccree.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following checkpatch.pl error:

ERROR: space required before the open brace '{'

in rf69.c file as requested by TODO file.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following checkpatch.pl error:

ERROR: else should follow close brace '}'

in rf69.c file as requested by TODO file.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following checkpatch.pl error:

ERROR: that open brace { should be on the previous line

in rf69.c file as requested by TODO file.

Note:
ERROR: else should follow close brace '}'
remains valid here and is going to be fixed by the next patch in set.

Additionally some style warnings remain valid here and could be fixed by
another patch.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is intended to fix coding style issues in order to comply
with kernel coding style guide as requested by TODO file.

It fixes the following checkpatch.pl error:

ERROR: "foo * bar" should be "foo *bar"

Note:
"WARNING: line over 80 characters" remains valid here and could be fixed
by another patch.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Reviewed-by: Marcus Wolf <linux@wolf-entwicklungen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Putting a 900 byte array on the stack is a clearly too much in the
kernel, and sometimes results in warnings like:

drivers/staging/pi433/pi433_if.c: In function 'pi433_tx_thread':
drivers/staging/pi433/pi433_if.c:645:1: error: the frame size of 1028 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

This moves the buffer into the dynamically allocated per-device
structure.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marcus Wolf <linux@wolf-entwicklungen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following four warnings found using sparse:

drivers/staging/pi433/pi433_if.c:211:9: warning: mixing different enum types
drivers/staging/pi433/pi433_if.c:211:9:     int enum optionOnOff  versus
drivers/staging/pi433/pi433_if.c:211:9:     int enum packetFormat
drivers/staging/pi433/pi433_if.c:211:9: warning: mixing different enum types
drivers/staging/pi433/pi433_if.c:211:9:     int enum optionOnOff  versus
drivers/staging/pi433/pi433_if.c:211:9:     int enum packetFormat
drivers/staging/pi433/pi433_if.c:268:9: warning: mixing different enum types
drivers/staging/pi433/pi433_if.c:268:9:     int enum optionOnOff  versus
drivers/staging/pi433/pi433_if.c:268:9:     int enum packetFormat
drivers/staging/pi433/pi433_if.c:268:9: warning: mixing different enum types
drivers/staging/pi433/pi433_if.c:268:9:     int enum optionOnOff  versus
drivers/staging/pi433/pi433_if.c:268:9:     int enum packetFormat

This is done calling the rf69_set_packet_format function using the
appropriate enum for the packetFormat argument.
Signed-off-by: Elia Geretto <elia.f.geretto@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver makes use of GENERIC_MSI_IRQ_DOMAIN which requires arch
support so, on architectures that don't have it, the kernel will fail
to build. Add explicit dependency on architectures that were
compile-tested, thus fixing compilation for the ones that don't
implement GENERIC_MSI_IRQ_DOMAIN.

Fixes: 03274850 ("staging: fsl-mc: allow the driver compile multi-arch")
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use resource_size() function on resource objects instead of
explicit computation.

This patch fixes the following coccinelle warning:

drivers/staging/fsl-mc/bus/dprc-driver.c:620:35-38: ERROR: Missing
resource_size with mc_dev -> regions
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need it here for iio fixes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes:

   - compressed boot: Ignore a generated .c file

   - VDSO: Fix a register clobber list

   - DECstation: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression

   - Octeon: Fix recent cleanups that cleaned away a bit too much thus
     breaking the arch side of the EDAC and USB drivers.

   - uasm: Fix duplicate const in "const struct foo const bar[]" which
     GCC 7.1 no longer accepts.

   - Fix race on setting and getting cpu_online_mask

   - Fix preemption issue. To do so cleanly introduce macro to get the
     size of L3 cache line.

   - Revert include cleanup that sometimes results in build error

   - MicroMIPS uses bit 0 of the PC to indicate microMIPS mode. Make
     sure this bit is set for kernel entry as well.

   - Prevent configuring the kernel for both microMIPS and MT. There are
     no such CPUs currently and thus the combination is unsupported and
     results in build errors.

  This has been sitting in linux-next for a few days and has survived
  automated testing by Imagination's test farm. No known regressions
  pending except a number of issues that crept up due to lots of people
  switching to GCC 7.1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Set ISA bit in entry-y for microMIPS kernels
  MIPS: Prevent building MT support for microMIPS kernels
  MIPS: PCI: Fix smp_processor_id() in preemptible
  MIPS: Introduce cpu_tcache_line_size
  MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
  MIPS: VDSO: Fix clobber lists in fallback code paths
  Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>."
  MIPS: OCTEON: Fix USB platform code breakage.
  MIPS: Octeon: Fix broken EDAC driver.
  MIPS: gitignore: ignore generated .c files
  MIPS: Fix race on setting and getting cpu_online_mask
  MIPS: mm: remove duplicate "const" qualifier on insn_table