- 04 Apr, 2011 4 commits
-
-
Mohammed Shafi Shajakhan authored
Signed-off-by:
Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Ben Greear authored
Aids debugging wifi behaviour. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Stanislaw Gruszka authored
Add iwlegacy driver to MAINTAINERS. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
John W. Linville authored
Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
-
- 30 Mar, 2011 36 commits
-
-
Felix Fietkau authored
It has the same purpose (and value) as ah->config.max_txtrig_level Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Felix Fietkau authored
It is not used anywhere Signed-off-by:
-
Felix Fietkau authored
Similar to the number of tx queue, the number of keycache entries depends on the chip and shouldn't be messed with based on EEPROM data. Remove this field and stick to using AR_KEYTABLE_SIZE Signed-off-by:
-
Felix Fietkau authored
It is not used anywhere and seems pointless Signed-off-by:
-
Felix Fietkau authored
It is only used in one place, and the device id check that it's based on can be moved there as well. Signed-off-by:
-
Felix Fietkau authored
The EEPROM contains a field that can restrict the number of hardware queues, however this is not only useless (all the known chips contain the same number of hardware queues), but also potentially dangerous in case of a misprogrammed EEPROM (could trigger driver crashes), so let's just ignore it completely. Signed-off-by:
-
Felix Fietkau authored
RF_BANK_SETUP, REG_WRITE_RF_ARRAY and REG_WRITE_ARRAY are way too big, so they shouldn't be inlined at every single callsite, especially since they can easily be turned into real functions. Signed-off-by:
-
Felix Fietkau authored
It's easier to read and it slightly decreases code size Signed-off-by:
-
Felix Fietkau authored
Reduces the number of calls to register ops. On MIPS this reduces the ath9k_hw binary size from 321k down to 310k Signed-off-by:
-
Felix Fietkau authored
With this change, loading the address to a register read/write function costs only one pointer dereference instead of two. On MIPS this reduces ath9k_hw binary size from 326k down to 321k. Signed-off-by:
-
Jouni Malinen authored
Indicate an NL80211_CMD_DEL_STATION event when a station entry in mac80211 is deleted to match with the NL80211_CMD_NEW_STATION event that is used when the entry was added. This is needed, e.g., to allow user space to remove a peer from RSN IBSS Authenticator state machine to avoid re-authentication and re-keying delays when the peer is not reachable anymore. Signed-off-by:
Jouni Malinen <jouni.malinen@atheros.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Jouni Malinen authored
Add support for using RSN IBSS with ath9k. For now, this uses software crypto for group addressed frames in RSN IBSS, but that may be optimized in the future by extending the key cache design to support per-STA RX GTK. Signed-off-by:
-
Felix Fietkau authored
Stuck beacon detection is supposed to trigger when 9 consecutive beacons could not be sent by the hardware. When the driver runs only one active AP mode interface, it still configures the hardware beacon timer for 4 (ATH_BCBUF) beacon slots slots, which causes stuck beacon detection to be reset if ath9k_hw_stoptxdma clears the stuck frames between SWBA intervals. Fix this by not resetting the missed beacon count for empty slots and multiplying the threshold not by the maximum number of beacon slots but by the configured number of beacon interfaces. Signed-off-by:
-
Felix Fietkau authored
Single missed (i.e. not transmitted) beacons in AP mode are not very rare and not necessarily an indicator of strong interference, so only trigger noise floor recalibration when multiple consecutive beacons could not be transmitted. Signed-off-by: -
Felix Fietkau authored
AP mode beacon timers in ath9k are configured in milliseconds, which breaks when increasing ATH_BCBUF to 8 instead of 4 (due to rounding errors). Since the hardware timers are actually configured in microseconds, it's better to let the driver use that unit directly. To be able to do that, the beacon interval parameter abuse for passing certain flags needs to be removed. This is easy to do, because those flags are completely unnecessary anyway. ATH9K_BEACON_ENA is ignored, ATH9K_BEACON_RESET_TSF can be replaced with calling ath9k_hw_reset_tsf from the driver directly. Signed-off-by:
-
Vasily Khoruzhick authored
Add support for suspend/resume in if_spi. Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Bing Zhao authored
This driver adds WiFi support for Marvell 802.11n based chipsets with SDIO interface. Currently only SD8787 is supported. More chipsets will be supported later. drivers/net/wireless/mwifiex/ Signed-off-by:
Nishant Sarmukadam <nishants@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Marc Yang <yangyang@marvell.com> Signed-off-by:
Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by:
Frank Huang <frankh@marvell.com> Signed-off-by:
-
Luis R. Rodriguez authored
Only AR9485 1.1 was sold. This debloats the driver by ~14 KiB. text data bss dec hex filename 300413 624 1056 302093 49c0d drivers/net/wireless/ath/ath9k/ath9k_hw.ko text data bss dec hex filename 310285 624 1056 311965 4c29d drivers/net/wireless/ath/ath9k/ath9k_hw-old.ko $ du -b ath9k_hw* 6210541 ath9k_hw.ko 6225089 ath9k_hw-old.ko Cc: Bill Wu <bill.wu@atheros.com> Cc: Paul Shaw <paul.shaw@atheros.com> Cc: Forbes Tsai <Forbes.Tsai@Atheros.com> Cc: Jesmine Chen <jesmine.chen@atheros.com> Cc: Marvian Chen <Hou-hua.Chen@Atheros.com> Cc: Vivek Natarajan <vivek.natarajan@atheros.com> Cc: Bernadette Yetso <bernadette.yetso@atheros.com> Cc: Sarvesh Shrivastava <sarvesh.shrivastava@atheros.com> Acked-by:
Yi-Chen Su <yi-chen.su@atheros.com> Acked-by:
Jeffrey Chung <jeffrey.chung@atheros.com> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Helmut Schaa authored
ieee80211_tx_status iterates over all tx rates the driver reports back in order to 1) mark tx rates as invalid if the driver cannot have tried that rate 2) find the actually used tx rate for the final retransmission By leaving the for loop when the first invalid rate index is found we can move the rates_idx assignment after the loop and therefore save a few assignments and conditionals. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Felix Fietkau authored
This workaround called ath_txq_schedule whenever there were still pending frames for a queue, but the queue depth was zero. Because of its its high false positive probability (e.g. with paused TIDs) and because it is in the way of other pending work (AP powersave fixes), it is better to remove this code entirely. Signed-off-by:
-
Felix Fietkau authored
Most AR9100 devices already have a chainmask of 7 (three antennas), however on the ones that don't (rx and tx chainmask set to 5), problems with IQ mismatch calibration have been observed. This shows up as tx queue hangs (and subsequent hardware resets) if traffic is sent during this type of calibration. Forcing the rx chainmask to 7 fixes the calibration issues with no apparent negative side effects on throughput and stability. Signed-off-by:
-
Felix Fietkau authored
Fixes interop issues with aggregation in combination with multi-BSSID Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Felix Fietkau authored
On some devices the correct MAC address is not in the EEPROM data, but stored somewhere else. Signed-off-by:
-
Felix Fietkau authored
Some devices control antenna settings or other things through GPIO pins of the wireless interface. Add a debugfs interface for changing those and keeping them set across card resets. Signed-off-by:
-
Felix Fietkau authored
Since the ath9k debugfs directory is cleaned up by debugfs_remove_recursive, there's no point in checking the return code of every single debugfs create line. Signed-off-by:
-
Larry Finger authored
Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Nishant Sarmukadam authored
Queue ADDBA requests in respective data queues to avoid ADDBA requests and the the related data packets (to the same ra/tid) queued in the hardware to be sent out asynchronously. Signed-off-by:
Brian Cavagnolo <brian@cozybit.com> Signed-off-by:
-
Nishant Sarmukadam authored
If the outgoing packet rate to a particular HT station is <=6.5 Mbps, do not attempt to create an ampdu. Also, if the outgoing rate is legacy rate, do not create an ampdu. Signed-off-by:
-
Nishant Sarmukadam authored
When an ampdu stream is on, if the firmware rate adaptation logic decides that the outgoing packet rate to the station needs to go below 6.5Mbps (non HT rate), it sends an event indicating that the ampdu stream needs to be destroyed. Handle this event in the driver and destroy the ampdu stream so that the rate can go below 6.5Mbps Signed-off-by:
-
Nishant Sarmukadam authored
Specifically, handle ampdu_action and attempt to start a BA session on receiving the first qos packet from mac80211 for transmission to a HT sta. While the BA session is being created, all the packets belonging to that stream will be dropped to prevent sequence number mismatch at the recipient. Contains contributions from: Yogesh Powar <yogeshp@marvell.com> Pradeep Nemavat <pnemavat@marvell.com> Brian Cavagnolo <brian@cozybit.com> Signed-off-by:
-
Brian Cavagnolo authored
In particular, we can now add, start, lookup, and remove streams. Based on work by Nishant Sarmukadam <nishants@marvell.com> and Pradeep Nemavat <pnemavat@marvell.com>. Signed-off-by:
Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by:
-
Brian Cavagnolo authored
We now have two different kinds of queues. And the number of AMPDU queues may vary. So we must be clear about which queues we are dealing with. Note that when we report the number of queues to mac80211, we only report the WMM queues. Based on work by Yogesh Powar <yogeshp@marvell.com>. Signed-off-by:
-
Nishant Sarmukadam authored
Signed-off-by:
-
Brian Cavagnolo authored
Firmware APIv2 adds the following enhancements: -- capabilities are reported by the firmware -- API supports up to 8 dedicated AMPDU streams -- optional packet timestamping and expiration can be enabled. Specifically, packets that are queued in firmware for longer than 500ms will be dropped if this option is used. Based on work by "Nishant Sarmukadam" <nishants@marvell.com> Signed-off-by:
-
Brian Cavagnolo authored
Specifically, APIv2 will specify a variable number of AMPDU queues in the MWL8K_CMD_GET_HW_SPEC. So init the tx queues after MWL8K_CMD_GET_HW_SPEC for ap fw. Also, we make it safe to deinit queues that have not been init'd. This happens if the mwl8k_get_hw_spec_ap routine fails, for example. Signed-off-by:
-
