- 05 Jun, 2019 18 commits
-
-
Matt Roper authored
Unlike ICL, EHL's combo PHYs can support HBR3 data rates. Note that this just extends the upper limit; we will continue to honor the max data rate specified in the VBT in cases where it is lower than HBR3. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190605211832.23945-1-matthew.d.roper@intel.comReviewed-by:
Manasi Navare <manasi.d.navare@intel.com>
-
Hans de Goede authored
Prior to this commit we fail to init the DSI panel on the GPD MicroPC: https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/ The problem is intel_dsi_vbt_init() failing with the following error: *ERROR* Burst mode freq is less than computed The pclk in the VBT panel modeline is 70000, together with 24 bpp and 4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000. But the target_burst_mode_freq in the VBT is 418000. This commit works around this problem by adding an intel_fuzzy_clock_check when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to bitrate when that checks succeeds, fixing the panel not working. Cc: stable@vger.kernel.org Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524174028.21659-2-hdegoede@redhat.com
-
Jani Nikula authored
Better grouping, better semantics for find_section(). No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/192cc8a45cb5c36ccbde25a725df135793a4263f.1559308269.git.jani.nikula@intel.com
-
Jani Nikula authored
Add new fields in the LFP block. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
New bit to look in another BDB block for more. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Make it easier to find the right blocks. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Use the comments verbatim from the spec to help find the right block. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Don't use bdb_ prefixes for structs within blocks. Add a new bdb struct for SDVO panel DTDs for completeness. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
We've carried this baggage for more than a decade. Time to let it go. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Change the order, add some stylistic touches, and add LSPCON. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Avoid iterating the child devices. This should be a non-functional change, but theoretically this might enable LSPCON on some extra ports with buggy VBTs. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Avoid iterating the child devices. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Add separate functions to get the port by DDC pin and AUX channel. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
This allows us to avoid iterating the child devices in some cases. Also replace the presence bit with child device being non-NULL, and set the child device pointer last to allow us to take advantage of it in follow-up work. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Make the child device order the priority order in sanitizing DDC pin and AUX CH. First come, first served. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Swati Sharma authored
In this patch, intel_color_get_config() is enabled and support for read_luts() will be added platform by platform incrementally in the follow-up patches. v4: -Renamed intel_get_color_config to intel_color_get_config [Jani] -Added the user early on such that support for get_color_config() can be added platform by platform incrementally [Jani] v5: -Incorrect place for calling intel_color_get_config() in haswell_get_pipe_config() [Ville] v6: -Renamed intel_color_read_luts() to intel_color_get_config() [Jani and Ville] Signed-off-by:Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
-
Swati Sharma authored
In this patch, a vfunc read_luts() is introduced to create a hw lut i.e. lut having values read from gamma/degamma registers which will later be used to compare with sw lut to validate gamma/degamma lut values. v3: -Rebase v4: -Renamed intel_get_color_config to intel_color_get_config [Jani] -Wrapped get_color_config() [Jani] v5: -Renamed intel_color_get_config() to intel_color_read_luts() -Renamed get_color_config to read_luts v6: -Renamed intel_color_read_luts() back to intel_color_get_config() [Jani and Ville] Signed-off-by: -
Mauro Carvalho Chehab authored
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -function Hardware workarounds ./drivers/gpu/drm/i915/intel_workarounds.c' failed with return code 1 WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -function Logical Rings, Logical Ring Contexts and Execlists ./drivers/gpu/drm/i915/intel_lrc.c' failed with return code 1 WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -internal ./drivers/gpu/drm/i915/intel_lrc.c' failed with return code 2 Fixes: 112ed2d3 ("drm/i915: Move GraphicsTechnology files under gt/") Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
- 04 Jun, 2019 21 commits
-
-
Chris Wilson authored
Instead of relying on the caller holding struct_mutex across the allocation, push the allocation under a tree of spinlocks stored inside the page tables. Not only should this allow us to avoid struct_mutex here, but it will allow multiple users to lock independent ranges for concurrent allocations, and operate independently. This is vital for pushing the GTT manipulation into a background thread where dependency on struct_mutex is verboten, and for allowing other callers to avoid struct_mutex altogether. v2: Restore lost GEM_BUG_ON for removing too many PTE from gen6_ppgtt_clear_range. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190604153830.19096-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
As the GTT is outside of the powerwell, we can simplify flushing the GGTT writes by using an unchecked mmio write and post. v2: s/unc/uncore/ Signed-off-by:
-
Chris Wilson authored
As the fence registers are not part of the engine powerwells, we do not need to fiddle with forcewake in order to update a fence. Avoid using the heavyweight debug checking normal mmio writes as the checking dominates the selftest runtime and is superfluous! In the process, retire the I915_WRITE() implicit macro with the new intel_uncore_write interface. v2: s/unc/uncore/ Signed-off-by:
-
Chris Wilson authored
We only need to flush the object once prior to starting the partial tiling test as inside the test we explicitly maintain coherency. Signed-off-by:
-
Ville Syrjälä authored
Stop dumping plane->state for planes. That is the old state most of the time and dumping stale information only serves to confuse people. Instead dump the new state just for the planes included in the operation. For now we'll include only the planes for the modeset/fastset pipes in the dumps. But probably we want to dump them all eventually, just not quite sure how to present that information nicely to the user. And while at it let's dump a few more interesting bits from the state. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Ville Syrjälä authored
Constify a bunch of the arguments of various state dumping functions. Makes it clear they don't mutate the states. And fix up some indent fails while at it. Signed-off-by:
-
Ville Syrjälä authored
Currently we're only dumping the failed crtc state if intel_modeset_pipe_config() fails. Let's do the state dump if anything else fails afterwards. The downside is that we lose the immediate knowledge which crtc caused the failure (unless a lower level function indicates it with an additional debug print) but having the full state dumped seems like something that could be beneficial. Signed-off-by:
-
Ville Syrjälä authored
Currently we're not dumping out whether the crtc is actually active or in dpms off state. Let's include that in the dumps. And while at it compress out a few lines from the state dump. Signed-off-by:
-
Ville Syrjälä authored
Currently we're dumping the crtc states before they have been fully calculated. Move the dumping to the end of .atomic_check() so we get a fully up to date dump. Let's also do the dump for fully disabled pipes, but we'll limit that to just saying that the pipe is disabled since the rest of the state is going to be nonsense in that case. Signed-off-by:
-
Ville Syrjälä authored
Switch to using intel_ types instead of drm_ types. Avoids ugly casts and nasty aliasing variables with different types. Signed-off-by:
-
Ville Syrjälä authored
Switch to using intel_ types instead of drm_ types. Avoids ugly casts and nasty aliasing variables with different types. Signed-off-by:
-
Ville Syrjälä authored
We already pass the crtc's state to intel_modeset_pipe_config() so passing the crtc as well is redundant. Signed-off-by:
-
Ville Syrjälä authored
We already pass the crtc's state to intel_dump_pipe_config() so passing the crtc as well is redundant. Signed-off-by:
-
Ville Syrjälä authored
Pass around intel_atomic_state rather than drm_atomic_state. This avoids some extra casts and annoing aliasing variables. Signed-off-by:
-
Ville Syrjälä authored
Pass around intel_atomic_state rather than drm_atomic_state. This avoids some extra casts and annoing aliasing variables. Signed-off-by:
-
Ville Syrjälä authored
Pass around intel_atomic_state rather than drm_atomic_state. This avoids some extra casts and annoing aliasing variables. Signed-off-by:
-
Ville Syrjälä authored
Thanks to using the short names for platoforms all the cdclk vfunc assignemtns now fit within 80 cols. Remove the extra line wraps. Signed-off-by:
-
Ville Syrjälä authored
Pass around intel_atomic_state rather than drm_atomic_state. This avoids some extra casts and annoing aliasing variables. Signed-off-by:
-
Oleg Vasilev authored
Currently, the i2c adapter is available only under DP connectors. Add i2c symlink under hdmi connector pointing to i2c adapter in order to make this behaviour consistent. The initial motivation was to make igt i2c subtest patch [1] work on all connectors. [1]: https://patchwork.freedesktop.org/series/60357/ v2: - Moved symlink remove to unregister (Ville) - Clarified commit message (Jani) - Changed WARN to DRM_ERROR (Jani) - Minor codestyle changes proposed by Jani v3: added blank line Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Oleg Vasilev <oleg.vasilev@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Move over structures, enums and macros from intel_display.h and i915_drv.h to have all the display PM defines in the same header. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Daniele Ceraolo Spurio authored
Keep all the device-level PM management in intel_runtime_pm.h/c and move all the display specific bits into their own file. Also add the new header to Makefile.header-test. Apart from the giant code move, the only difference is with the intel_runtime_<get/put>_raw() functions, which are now exposed in the header. The _put() version is also not conditionally compiled anymore since it is ok to always pass the wakeref taken from the _get() to __intel_runtime_pm_put (it is -1 if tracking is disabled). Suggested-by:
-
- 01 Jun, 2019 1 commit
-
-
Imre Deak authored
Make sure the HW state of the port A combo PHY is correct wrt. the IREFGEN setting. This will force a reprogramming during init or a WARN during uninit if the setting is incorrect. On my ICL RVP I haven't seen this check failing and leading to a forced reinit/WARN, but let's add it still for consistency. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
