- 17 Nov, 2009 24 commits
-
-
Changli Gao authored
move checking if eaction is valid in tcf_mirred_init() Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Changli Gao authored
1. don't let go back using goto. 2. don't call skb_act_clone() until it is necessary. 3. one exit of the critical context. Signed-off-by:
-
Rémi Denis-Courmont authored
Reported-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Shreyas Bhatewara authored
This patch removes config dependency on x86 to build vmxnet3 driver. Thus the driver can be built on big endian architectures now. Although vmxnet3 is not supported on VMs other than x86 architecture, all this code goes in to ensure correctness. If the code is not dependent on x86, it should not assume little endian architecture in any of its operations. Signed-off-by:
Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by:
-
Johannes Berg authored
The netlink URELEASE notifier doesn't notify for sockets that have been used to receive multicast but it should be called for such sockets as well since they might _also_ be used for sending and not solely for receiving multicast. We will need that for nl80211 (generic netlink sockets) in the future. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Vladislav Zolotarov authored
Put Tx and Rx DPC to be handled in the NAPI: - Saves status blocks. - Moves the Tx work from hardIRQ to NAPI. Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
fangxiaozhi authored
1. This patch is based on the kernel of 2.6.32-rc7 2. In this patch, we enlarge the out buffer size to optimize the upload speed for the ppp connection. Then it can support the upload of HSUPA data cards. Signed-off-by:
fangxiaozhi <huananhu@huawei.com> Signed-off-by:
-
Wolfram Sang authored
- move Kconfig entries to the subdirectory - do remaining renames of mpc52xx to mpc5xxx Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Not all hardcoded values have been replaced as this made the code quite unreadable. IMHO this compromise serves the purpose of readability. Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Merge two functions into one. The result is smaller as they can now share some variables. Signed-off-by:
-
Wolfram Sang authored
As suggested by Wolfgang Grandegger. Signed-off-by:
-
Wolfram Sang authored
- use extern where apropriate - don't export symbols Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
The upper layer does not support it yet. Signed-off-by:
-
Wolfram Sang authored
- remove whitespaces - use ! and ?: when apropriate - make braces consistent Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/can/Kconfig
-
zeal authored
ks8695_rx() will call refill_buffers() for every incoming packet. Its not necessary. We just need do it after finishing receiving thing. And the 'RX dma engine' is in the same situation. This blocks our user space application. The following patch may fix it. Signed-off-by:
zeal <zealcook@gmail.com> Signed-off-by:
-
zeal authored
ks8695 rx irq is edge-level. Before arriving at irq handler, the corresponding status bit has been clear(irq's ack). So we should not check it after that. Signed-off-by:
-
Ben McKeegan authored
PPP does not correctly call pskb_may_pull() on all necessary receive paths before reading the PPP protocol, thus causing PPP to report seemingly random 'unsupported protocols' and eventually trigger BUG_ON(skb->len < skb->data_len) in skb_pull_rcsum() when receiving multilink protocol in non-linear skbs. ppp_receive_nonmp_frame() does not call pskb_may_pull() before reading the protocol number. For the non-mp receive path this is not a problem, as this check is done in ppp_receive_frame(). For the mp receive path, ppp_mp_reconstruct() usually copies the data into a new linear skb. However, in the case where the frame is made up of a single mp fragment, the mp header is pulled and the existing skb used. This skb was then passed to ppp_receive_nonmp_frame() without checking if the encapsulated protocol header could safely be read. Signed-off-by:
Ben McKeegan <ben@netservers.co.uk> Signed-off-by:
-
Breno Leitao authored
After commmit 4b77b0a2 EEH breaks after the second error, since it calls pci_restore_state() but it returns 0, since pci->state_saved is false. So, this patch just call pci_save_state() after pci_restore_state(). Signed-off-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
-
-
- 16 Nov, 2009 16 commits
-
-
Eric Dumazet authored
net: Fix the rollback test in dev_change_name() In dev_change_name() an err variable is used for storing the original call_netdevice_notifiers() errno (negative) and testing for a rollback error later, but the test for non-zero is wrong, because the err might have positive value as well - from dev_alloc_name(). It means the rollback for a netdevice with a number > 0 will never happen. (The err test is reordered btw. to make it more readable.) Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Frank Blaschka authored
Technically there is no need to set the card offline to change RX checksumming. Get rid of this stupid limitation. Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Frank Blaschka authored
The maximum TSO size OSA can handle is 15 * PAGE_SIZE. This patch reduces gso_max_size to this value and adds some sanity checks and statistics to the TSO implementation. Since only layer 3 is able to do TSO move all TSO related functions to the qeth_l3 module. Signed-off-by:
-
Ursula Braun authored
Setting a qeth device online requires to call function ccw_device_set_online() for read-, write-, and data-subchannel. Failures should be detected immediately without an attempt to invoke follow-on activity qeth_qdio_clear_card()., In addition, ccw_device_set_online calls are consolidated in qeth_core_main.c only. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Ursula Braun authored
EDDP code has been removed from qeth in 2009. This patch removes two useless remaining EDDP-references. Signed-off-by:
-
Einar Lueck authored
Isolate data connection to a shared OSA card against other data connections to the same OSA card. Connectivity between isolated data connections sharing the same OSA card is therefore possible only through external network gear (e.g. a router). Signed-off-by:
Einar Lueck <elelueck@de.ibm.com> Signed-off-by:
-
David S. Miller authored
This reverts commit 38783e67. It causes kernel bugzilla #14594 Signed-off-by:
-
Marin Mitov authored
The function print_mac in net/ethernet/eth.c is marked __deprecated and not used. Remove it. Signed-off-by:
Marin Mitov <mitov@issp.bas.bg> Signed-off-by:
-
Jay Vosburgh authored
The language of 802.3ad 43.4.9 requires the "recordPDU" function to, in part, compare the Partner parameter values in a received LACPDU to the stored Actor values. If those match, then the Partner's synchronization state is set to true. The current 802.3ad implementation is performing these steps out of order; first, the synchronization check is done, then the paramters are checked to see if they match (the synch check being done against a match check of a prior LACPDU). This causes delays in establishing aggregators in some circumstances. This patch modifies the 802.3ad code to call __choose_matched, the function that does the "match" comparisions, as the first step of __record_pdu, instead of immediately afterwards. This new behavior is in compliance with the language of the standard. Some additional commentary relating to code vs. standard is also added. Reported by Martin Patterson <martin@gear6.com> who also supplied the logic of the fix and verified the patch. Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
Eric Dumazet authored
Commit 05423b24 (vlan: allow null VLAN ID to be used) forgot to update __vlan_hwaccel_rx() & vlan_gro_common() We need to set VLAN_TAG_PRESENT flag in skb->vlan_tci Signed-off-by:
-
Sriram authored
In the NAPI poll function(emac_poll), check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in a continuous softirq loop when the interface is brought down under heavy traffic(tested wit Traffic Generator). Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by:
Sriramakrishnan <srk@ti.com> Acked-by:
Chaithrika U S <chaithrika@ti.com> Signed-off-by:
-
Sriram authored
In the NAPI poll function, check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in continuous softirq loop when the interface is brought down under heavy traffic(tested with Traffic Generator).Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by:
-
Matt Carlson authored
This patch updates the tg3 version to 3.104. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Matt Carlson authored
This patch fixes the 5717 variant device ID enumerations and adds those DIDs to the PCI ID table. Signed-off-by:
-
Matt Carlson authored
This patch adds code to funnel each MSI-X vector's rx packet buffers into a single set of producer rings which will then be submitted to the hardware. Signed-off-by:
-
Matt Carlson authored
The rx producer mailbox registers are used in several spots in the code. The addition of TG3_64BIT_REG_LOW makes register references uncomfortably long. This patch creates an alias for the standard and jumbo ring producer index registers to make the code cleaner. Signed-off-by:
-
