- 12 Sep, 2019 2 commits
-
-
Stanley Chu authored
Currently blk_set_runtime_active() is checking if q->dev is null by itself, thus remove the same checking in its user: scsi_dev_type_resume(). Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Stanley Chu authored
Some devices may skip blk_pm_runtime_init() and have null pointer in its request_queue->dev. For example, SCSI devices of UFS Well-Known LUNs. Currently the null pointer is checked by the user of blk_set_runtime_active(), i.e., scsi_dev_type_resume(). It is better to check it by blk_set_runtime_active() itself instead of by its users. Signed-off-by:
-
- 11 Sep, 2019 3 commits
-
-
André Almeida authored
A negative number of devices is nonsensical, so change the type to unsigned. If the number of devices is 0, it is impossible for userspace to interact with the module, so refuse loading the driver for that case. Signed-off-by:
André Almeida <andrealmeid@collabora.com> Signed-off-by:
-
André Almeida authored
The name of the module is "null_blk", not "null". Make `pr_info()` follow the pattern of `pr_err()` log messages. Signed-off-by:
-
André Almeida authored
Use proper ReST syntax for chapters. Add more information to enhance standardization in the file and to make the rendering more homogeneous. Add a SPDX identifier. Mark single-queue mode as deprecated. Signed-off-by:
-
- 10 Sep, 2019 6 commits
-
-
Tejun Heo authored
Report debt and rename del_ms row to delay for consistency. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
When outputting json: * Don't truncate numbers. * Report address of iocg to ease drilling down further. When outputting table: * Use math.ceil() for delay_ms so that small delays don't read as 0. Signed-off-by:
-
Tejun Heo authored
Json has limited accuracy for numbers and can silently truncate 64bit values, which can be extremely confusing. Let's consistently use string encapsulated values for json output. While at it, convert an unnecesary f-string to str(). Signed-off-by:
-
Tejun Heo authored
Merges have the same problem that forced-bios had which is fixed by the previous patch. The cost of a merge is calculated at the time of issue and force-advances vtime into the future. Until global vtime catches up, how the cgroup's hweight changes in the meantime doesn't matter and it often leads to situations where the cost is calculated at one hweight and paid at a very different one. See the previous patch for more details. Fix it by never advancing vtime into the future for merges. If budget is available, vtime is advanced. Otherwise, the cost is charged as debt. This brings merge cost handling in line with issue cost handling in ioc_rqos_throttle(). Signed-off-by:
-
Tejun Heo authored
Currently, when a bio needs to be force-charged and there isn't enough budget, vtime is simply pushed into the future. This means that the cost of the whole bio is scaled using the current hweight and then charged immediately. Until the global vtime advances beyond this future vtime, the cgroup won't be allowed to issue normal IOs. This is incorrect and can lead to, for example, exploding vrate or extended stalls if vrate range is constrained. Consider the following scenario. 1. A cgroup with a very low hweight runs out of budget. 2. A storm of swap-out happens on it. All of them are scaled according to the current low hweight and charged to vtime pushing it to a far future. 3. All other cgroups go idle and now the above cgroup has access to the whole device. However, because vtime is already wound using the past low hweight, what its current hweight is doesn't matter until global vtime catches up to the local vtime. 4. As a result, either vrate gets ramped up extremely or the IOs stall while the underlying device is idle. This is because the hweight the overage is calculated at is different from the hweight that it's being paid at. Fix it by remembering the overage in absoulte vtime and continuously paying with the actual budget according to the current hweight at each period. Note that non-forced bios which wait already remembers the cost in absolute vtime. This brings forced-bio accounting in line. Signed-off-by:
-
Tejun Heo authored
ioc_pd_free() first cancels the hrtimers and then deactivates the iocg. However, the iocg timer can run inbetween and reschedule the hrtimers which will end up running after the iocg is freed leading to crashes like the following. general protection fault: 0000 [#1] SMP ... RIP: 0010:iocg_kick_delay+0xbe/0x1b0 RSP: 0018:ffffc90003598ea0 EFLAGS: 00010046 RAX: 1cee00fd69512b54 RBX: ffff8881bba48400 RCX: 00000000000003e8 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881bba48400 RBP: 0000000000004e20 R08: 0000000000000002 R09: 00000000000003e8 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90003598ef0 R13: 00979f3810ad461f R14: ffff8881bba4b400 R15: 25439f950d26e1d1 FS: 0000000000000000(0000) GS:ffff88885f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f64328c7e40 CR3: 0000000002409005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> iocg_delay_timer_fn+0x3d/0x60 __hrtimer_run_queues+0xfe/0x270 hrtimer_interrupt+0xf4/0x210 smp_apic_timer_interrupt+0x5e/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> Fix it by canceling hrtimers after deactivating the iocg. Fixes: 7caa4715 ("blkcg: implement blk-iocost") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
- 06 Sep, 2019 11 commits
-
-
Fam Zheng authored
This adds to BFQ the missing per-device weight interfaces: blkio.bfq.weight_device on legacy and io.bfq.weight on unified. The implementation pretty closely resembles what we had in CFQ and the parsing code is basically reused. Tests ===== Using two cgroups and three block devices, having weights setup as: Cgroup test1 test2 ============================================ default 100 500 sda 500 100 sdb default default sdc 200 200 cgroup v1 runs -------------- sda.test1.out: READ: bw=913MiB/s sda.test2.out: READ: bw=183MiB/s sdb.test1.out: READ: bw=213MiB/s sdb.test2.out: READ: bw=1054MiB/s sdc.test1.out: READ: bw=650MiB/s sdc.test2.out: READ: bw=650MiB/s cgroup v2 runs -------------- sda.test1.out: READ: bw=915MiB/s sda.test2.out: READ: bw=184MiB/s sdb.test1.out: READ: bw=216MiB/s sdb.test2.out: READ: bw=1069MiB/s sdc.test1.out: READ: bw=621MiB/s sdc.test2.out: READ: bw=622MiB/s Signed-off-by:Fam Zheng <zhengfeiran@bytedance.com> Acked-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
-
Fam Zheng authored
This function will be useful when we update weight from the soon-coming per-device interface. Signed-off-by:
-
Fam Zheng authored
The comment of bfq_group_set_weight says the reading of prio_changed should happen before the reading of weight, but a memory barrier is missing here. Add it now, to match the smp_wmb() there. Signed-off-by:
-
Jens Axboe authored
The lookup logic is broken - 'e' will never be NULL, even if the list is empty. Maintain lookup hit in a separate variable instead. Fixes: a0958ba7 ("block: Improve default elevator selection") Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Damien Le Moal authored
Using the helper blk_queue_required_elevator_features(), set the elevator feature ELEVATOR_F_ZBD_SEQ_WRITE as required for the request queue of SCSI ZBC disks. This feature requirement can always be satisfied as the mq-deadline elevator is always selected for in-kernel compilation when CONFIG_BLK_DEV_ZONED (zoned block device support) is enabled. Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Damien Le Moal authored
Using the helper blk_queue_required_elevator_features(), set the elevator feature ELEVATOR_F_ZBD_SEQ_WRITE as required for the request queue of null_blk devices created with zoned mode enabled. This feature requirement can always be satisfied as the mq-deadline elevator is always selected for in-kernel compilation when CONFIG_BLK_DEV_ZONED (zoned block device support) is enabled. Reviewed-by:
-
Damien Le Moal authored
When elevator_init_mq() is called from blk_mq_init_allocated_queue(), the only information known about the device is the number of hardware queues as the block device scan by the device driver is not completed yet for most drivers. The device type and elevator required features are not set yet, preventing to correctly select the default elevator most suitable for the device. This currently affects all multi-queue zoned block devices which default to the "none" elevator instead of the required "mq-deadline" elevator. These drives currently include host-managed SMR disks connected to a smartpqi HBA and null_blk block devices with zoned mode enabled. Upcoming NVMe Zoned Namespace devices will also be affected. Fix this by adding the boolean elevator_init argument to blk_mq_init_allocated_queue() to control the execution of elevator_init_mq(). Two cases exist: 1) elevator_init = false is used for calls to blk_mq_init_allocated_queue() within blk_mq_init_queue(). In this case, a call to elevator_init_mq() is added to __device_add_disk(), resulting in the delayed initialization of the queue elevator after the device driver finished probing the device information. This effectively allows elevator_init_mq() access to more information about the device. 2) elevator_init = true preserves the current behavior of initializing the elevator directly from blk_mq_init_allocated_queue(). This case is used for the special request based DM devices where the device gendisk is created before the queue initialization and device information (e.g. queue limits) is already known when the queue initialization is executed. Additionally, to make sure that the elevator initialization is never done while requests are in-flight (there should be none when the device driver calls device_add_disk()), freeze and quiesce the device request queue before calling blk_mq_init_sched() in elevator_init_mq(). Reviewed-by:
-
Damien Le Moal authored
For block devices that do not specify required features, preserve the current default elevator selection (mq-deadline for single queue devices, none for multi-queue devices). However, for devices specifying required features (e.g. zoned block devices ELEVATOR_F_ZBD_SEQ_WRITE feature), select the first available elevator providing the required features. In all cases, default to "none" if no elevator is available or if the initialization of the default elevator fails. Reviewed-by:
-
Damien Le Moal authored
Introduce the definition of elevator features through the elevator_features flags in the elevator_type structure. Each flag can represent a feature supported by an elevator. The first feature defined by this patch is support for zoned block device sequential write constraint with the flag ELEVATOR_F_ZBD_SEQ_WRITE, which is implemented by the mq-deadline elevator using zone write locking. Other possible features are IO priorities, write hints, latency targets or single-LUN dual-actuator disks (for which the elevator could maintain one LBA ordered list per actuator). The required_elevator_features field is also added to the request_queue structure to allow a device driver to specify elevator feature flags that an elevator must support for the correct operation of the device (e.g. device drivers for zoned block devices can have the ELEVATOR_F_ZBD_SEQ_WRITE flag as a required feature). The helper function blk_queue_required_elevator_features() is defined for setting this new field. With these two new fields in place, the elevator functions elevator_match() and elevator_find() are modified to allow a user to set only an elevator with a set of features that satisfies the device required features. Elevators not matching the device requirements are not shown in the device sysfs queue/scheduler file to prevent their use. The "none" elevator can always be selected as before. Reviewed-by:
-
Damien Le Moal authored
If the default elevator chosen is mq-deadline, elevator_init_mq() may return an error if mq-deadline initialization fails, leading to blk_mq_init_allocated_queue() returning an error, which in turn will cause the block device initialization to fail and the device not being exposed. Instead of taking such extreme measure, handle mq-deadline initialization failures in the same manner as when mq-deadline is not available (no module to load), that is, default to the "none" scheduler. With this change, elevator_init_mq() return type can be changed to void. Reviewed-by:
-
Damien Le Moal authored
Instead of checking a queue tag_set BLK_MQ_F_NO_SCHED flag before calling elevator_init_mq() to make sure that the queue supports IO scheduling, use the elevator.c function elv_support_iosched() in elevator_init_mq(). This does not introduce any functional change but ensure that elevator_init_mq() does the right thing based on the queue settings. Reviewed-by:
-
- 05 Sep, 2019 2 commits
-
-
Minwoo Im authored
If userspace requests target to be removed, nvm_remove_tgt() will iterate the nvm_devices to find out the given target, but if not found, then it should print out an error. Signed-off-by:
Minwoo Im <minwoo.im.dev@gmail.com> Updated output string and patch description. Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
-
Minwoo Im authored
all the pr_() family can have this prefix by pr_fmt. Signed-off-by:
Javier González <javier@javigon.com> Signed-off-by:
-
- 04 Sep, 2019 4 commits
-
-
zhengbin authored
If alloc_disk fails in pcd_init_units, cd->disk & pi are empty, we need to check if cd->disk is null in pcd_detect. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
zhengbin authored
In pcd_init_units, if blk_mq_init_sq_queue fails, need to set queue to NULL before put_disk, otherwise null-ptr-deref Read will occur. put_disk kobject_put disk_release blk_put_queue(disk->queue) Fixes: f0d17625 ("paride/pcd: Fix potential NULL pointer dereference and mem leak") Reported-by: -
zhengbin authored
In pf_init_units, if blk_mq_init_sq_queue fails, need to set queue to NULL before put_disk, otherwise null-ptr-deref Read will occur. put_disk kobject_put disk_release blk_put_queue(disk->queue) Fixes: 77218ddf ("paride: convert pf to blk-mq") Reported-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/song/mdJens Axboe authored
Pull MD fixes from Song. * 'md-next' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid5: use bio_end_sector to calculate last_sector md/raid1: fail run raid1 array when active disk less than one md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone
-
- 03 Sep, 2019 10 commits
-
-
Guoqing Jiang authored
Use the common way to get last_sector. Signed-off-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
Song Liu <songliubraving@fb.com>
-
Yufen Yu authored
When run test case: mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal mdadm -S /dev/md1 mdadm -A /dev/md1 /dev/sd[b-c] --run --force mdadm --zero /dev/sda mdadm /dev/md1 -a /dev/sda echo offline > /sys/block/sdc/device/state echo offline > /sys/block/sdb/device/state sleep 5 mdadm -S /dev/md1 echo running > /sys/block/sdb/device/state echo running > /sys/block/sdc/device/state mdadm -A /dev/md1 /dev/sd[a-c] --run --force mdadm run fail with kernel message as follow: [ 172.986064] md: kicking non-fresh sdb from array! [ 173.004210] md: kicking non-fresh sdc from array! [ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors [ 173.022406] md1: failed to create bitmap (-5) In fact, when active disk in raid1 array less than one, we need to return fail in raid1_run(). Reviewed-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
-
Guilherme G. Piccoli authored
Currently md raid0/linear are not provided with any mechanism to validate if an array member got removed or failed. The driver keeps sending BIOs regardless of the state of array members, and kernel shows state 'clean' in the 'array_state' sysfs attribute. This leads to the following situation: if a raid0/linear array member is removed and the array is mounted, some user writing to this array won't realize that errors are happening unless they check dmesg or perform one fsync per written file. Despite udev signaling the member device is gone, 'mdadm' cannot issue the STOP_ARRAY ioctl successfully, given the array is mounted. In other words, no -EIO is returned and writes (except direct ones) appear normal. Meaning the user might think the wrote data is correctly stored in the array, but instead garbage was written given that raid0 does stripping (and so, it requires all its members to be working in order to not corrupt data). For md/linear, writes to the available members will work fine, but if the writes go to the missing member(s), it'll cause a file corruption situation, whereas the portion of the writes to the missing devices aren't written effectively. This patch changes this behavior: we check if the block device's gendisk is UP when submitting the BIO to the array member, and if it isn't, we flag the md device as MD_BROKEN and fail subsequent I/Os to that device; a read request to the array requiring data from a valid member is still completed. While flagging the device as MD_BROKEN, we also show a rate-limited warning in the kernel log. A new array state 'broken' was added too: it mimics the state 'clean' in every aspect, being useful only to distinguish if the array has some member missing. We rely on the MD_BROKEN flag to put the array in the 'broken' state. This state cannot be written in 'array_state' as it just shows one or more members of the array are missing but acts like 'clean', it wouldn't make sense to write it. With this patch, the filesystem reacts much faster to the event of missing array member: after some I/O errors, ext4 for instance aborts the journal and prevents corruption. Without this change, we're able to keep writing in the disk and after a machine reboot, e2fsck shows some severe fs errors that demand fixing. This patch was tested in ext4 and xfs filesystems, and requires a 'mdadm' counterpart to handle the 'broken' state. Cc: Song Liu <songliubraving@fb.com> Reviewed-by:
Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by:
-
Kent Overstreet authored
The race was when a thread using closure_sync() notices cl->s->done == 1 before the thread calling closure_put() calls wake_up_process(). Then, it's possible for that thread to return and exit just before wake_up_process() is called - so we're trying to wake up a process that no longer exists. rcu_read_lock() is sufficient to protect against this, as there's an rcu barrier somewhere in the process teardown path. Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Acked-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Dan Carpenter authored
The copy_to_user() function returns the number of bytes remaining to be copied, but the intention here was to return -EFAULT if the copy fails. Fixes: cafe5635 ("bcache: A block layer cache") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Shile Zhang authored
Read /sys/fs/bcache/<uuid>/cacheN/priority_stats can take very long time with huge cache after long run. Signed-off-by:
Shile Zhang <shile.zhang@linux.alibaba.com> Tested-by:
Heitor Alves de Siqueira <halves@canonical.com> Signed-off-by:
-
Marcos Paulo de Souza authored
This argument was not being considered since blk-mq was set by default, so removed this documentation to avoid confusion. Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> .txt file is now .rst Signed-off-by:
-
Marcos Paulo de Souza authored
This argument was ignored since blk-mq was set as default, so remove it from documentation. Reviewed-by:
-
Marcos Paulo de Souza authored
Since the inclusion of blk-mq, elevator argument was not being considered anymore, and it's utility died long with the legacy IO path, now removed too. Reviewed-by:
Bob Liu <bob.liu@oracle.com> Reviewed-by:
-
Damien Le Moal authored
Commit 7211aef8 ("block: mq-deadline: Fix write completion handling") added a call to blk_mq_sched_mark_restart_hctx() in dd_dispatch_request() to make sure that write request dispatching does not stall when all target zones are locked. This fix left a subtle race when a write completion happens during a dispatch execution on another CPU: CPU 0: Dispatch CPU1: write completion dd_dispatch_request() lock(&dd->lock); ... lock(&dd->zone_lock); dd_finish_request() rq = find request lock(&dd->zone_lock); unlock(&dd->zone_lock); zone write unlock unlock(&dd->zone_lock); ... __blk_mq_free_request check restart flag (not set) -> queue not run ... if (!rq && have writes) blk_mq_sched_mark_restart_hctx() unlock(&dd->lock) Since the dispatch context finishes after the write request completion handling, marking the queue as needing a restart is not seen from __blk_mq_free_request() and blk_mq_sched_restart() not executed leading to the dispatch stall under 100% write workloads. Fix this by moving the call to blk_mq_sched_mark_restart_hctx() from dd_dispatch_request() into dd_finish_request() under the zone lock to ensure full mutual exclusion between write request dispatch selection and zone unlock on write request completion. Fixes: 7211aef8 ("block: mq-deadline: Fix write completion handling") Cc: stable@vger.kernel.org Reported-by:
Hans Holmberg <Hans.Holmberg@wdc.com> Reviewed-by:
-
- 31 Aug, 2019 1 commit
-
-
Tejun Heo authored
page->mapping may encode different values in it and page_mapping() should always be used to access the mapping pointer. track_foreign_dirty tracepoint was incorrectly accessing page->mapping directly. Use page_mapping() instead. Also, add NULL checks while at it. Fixes: 3a8e9ac8 ("writeback: add tracepoints for cgroup foreign writebacks") Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
- 30 Aug, 2019 1 commit
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe changes from Sagi: "The nvme updates include: - ana log parse fix from Anton - nvme quirks support for Apple devices from Ben - fix missing bio completion tracing for multipath stack devices from Hannes and Mikhail - IP TOS settings for nvme rdma and tcp transports from Israel - rq_dma_dir cleanups from Israel - tracing for Get LBA Status command from Minwoo - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself - Some consolidation between the fabrics transports for handling the CAP register - reset race with ns scanning fix for fabrics (move fabrics commands to a dedicated request queue with a different lifetime from the admin request queue)." * 'nvme-5.4' of git://git.infradead.org/nvme: (30 commits) nvme-rdma: Use rq_dma_dir macro nvme-fc: Use rq_dma_dir macro nvme-pci: Tidy up nvme_unmap_data nvme: make fabrics command run on a separate request queue nvme-pci: Support shared tags across queues for Apple 2018 controllers nvme-pci: Add support for Apple 2018+ models nvme-pci: Add support for variable IO SQ element size nvme-pci: Pass the queue to SQ_SIZE/CQ_SIZE macros nvme: trace bio completion nvme-multipath: fix ana log nsid lookup when nsid is not found nvmet-tcp: Add TOS for tcp transport nvme-tcp: Add TOS for tcp transport nvme-tcp: Use struct nvme_ctrl directly nvme-rdma: Add TOS for rdma transport nvme-fabrics: Add type of service (TOS) configuration nvmet-tcp: fix possible memory leak nvmet-tcp: fix possible NULL deref nvmet: trace: parse Get LBA Status command in detail nvme: trace: parse Get LBA Status command in detail nvme: trace: support for Get LBA Status opcode parsed ...
-
