The fib_table_lookup tracepoint found 2 places where the flowi4_flags is
not initialized.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because of the default 0 value of ret in dsa_slave_port_attr_set, a
driver may return -EOPNOTSUPP from the commit phase of a STP state,
which triggers a WARN() from switchdev.

This happened on a 6185 switch which does not support hardware bridging.

Fixes: 35636062 ("switchdev: convert STP update to switchdev attr set")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When compiling Documentation/ptp/testptp.c the following compiler
warnings are printed out:

Documentation/ptp/testptp.c: In function ‘main’:
Documentation/ptp/testptp.c:367:11: warning: format ‘%lld’ expects argument
    of type ‘long long int’, but argument 3 has type ‘__s64’ [-Wformat=]
           event.t.sec, event.t.nsec);
           ^
Documentation/ptp/testptp.c:505:5: warning: format ‘%lld’ expects argument
    of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=]
     (pct+2*i)->sec, (pct+2*i)->nsec);
     ^
Documentation/ptp/testptp.c:507:5: warning: format ‘%lld’ expects argument
    of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=]
     (pct+2*i+1)->sec, (pct+2*i+1)->nsec);
     ^
Documentation/ptp/testptp.c:509:5: warning: format ‘%lld’ expects argument
    of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=]
     (pct+2*i+2)->sec, (pct+2*i+2)->nsec);

This happens because __s64 is by default defined as "long" on ppc64,
not as "long long". However, to fix these warnings, it's possible to
define the __SANE_USERSPACE_TYPES__ so that __s64 gets defined to
"long long" on ppc64, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both new_steering_entry() and existing_steering_entry() return values
based on their success or failure, but currently they fall through
silently.  This can make troubleshooting difficult, as we were unable
to tell which one of these two functions returned errors or
specifically what code was returned.  This patch remedies that
situation by passing the return codes to err, which is returned by
mlx4_qp_attach_common() itself.

This also addresses a leak in the call to mlx4_bitmap_free() as well.
Signed-off-by: Robb Manes <rmanes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Frames destined to an unknown address must be forwarded to the CPU
port. Otherwise incoming ARP, dhcp leases, etc, do not work.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Earlier patch 6ae459bd tried to detect void ckecksum partial
skb by comparing pull length to checksum offset. But it does
not work for all cases since checksum-offset depends on
updates to skb->data.

Following patch fixes it by validating checksum start offset
after skb-data pointer is updated. Negative value of checksum
offset start means there is no need to checksum.

Fixes: 6ae459bd ("skbuff: Fix skb checksum flag on skb pull")
Reported-by: Andrew Vagin <avagin@odin.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Wolfgang reported that IPv6 stack is ignoring oif in output route lookups:

    With ipv6, ip -6 route get always returns the specific route.

    $ ip -6 r
    2001:db8:e2::1 dev enp2s0  proto kernel  metric 256
    2001:db8:e2::/64 dev enp2s0  metric 1024
    2001:db8:e3::1 dev enp3s0  proto kernel  metric 256
    2001:db8:e3::/64 dev enp3s0  metric 1024
    fe80::/64 dev enp3s0  proto kernel  metric 256
    default via 2001:db8:e3::255 dev enp3s0  metric 1024

    $ ip -6 r get 2001:db8:e2::100
    2001:db8:e2::100 from :: dev enp2s0  src 2001:db8:e3::1  metric 0
        cache

    $ ip -6 r get 2001:db8:e2::100 oif enp3s0
    2001:db8:e2::100 from :: dev enp2s0  src 2001:db8:e3::1  metric 0
        cache

The stack does consider the oif but a mismatch in rt6_device_match is not
considered fatal because RT6_LOOKUP_F_IFACE is not set in the flags.

Cc: Wolfgang Nothdurft <netdev@linux-dude.de>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Otherwise 4294967295 (MBit/s) (-1) will be printed when there is no link.
Documentation/ABI/testing/sysfs-class-net does not state if this shall be
signed or unsigned.
Also remove the now unused variable fmt_udec.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Several functions can return negative value in case of error,
so their return type should be fixed as well as type of variables
to which this value is assigned.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Aaron Conole says:

====================
af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag

This patch set implements a bugfix for kernel.org bugzilla #12323, allowing
MSG_PEEK to return all queued data on the unix domain socket, not just the
data contained in a single SKB.

This is the v3 version of this patch, which includes a suggested modification
by Eric Dumazet to convert the unix_sk() conversion macro to a static inline
function. These patches are independent and can be applied separately.

This set was tested over a 24-hour period, utilizing a loop continually
executing the bugzilla issue attached python code. It was instrumented with
a pr_err_once() ([   13.798683] unix: went there at least one time).

v2->v3:
 - Added Eric Dumazet's suggestion for #define to static inline
 - Fixed an issue calling unix_state_lock() with an invalid argument

v3->v4:
 - Eliminated an XXX comment
 - Changed from goto unlock to explicit unix_state_unlock() and break
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag
is set.

This is referenced in kernel bugzilla #12323 @
https://bugzilla.kernel.org/show_bug.cgi?id=12323

As described both in the BZ and lkml thread @
http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an
AF_UNIX socket only reads a single skb, where the desired effect is
to return as much skb data has been queued, until hitting the recv
buffer size (whichever comes first).

The modified MSG_PEEK path will now move to the next skb in the tree
and jump to the again: label, rather than following the natural loop
structure. This requires duplicating some of the loop head actions.

This was tested using the python socketpair python code attached to
the bugzilla issue.
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

As suggested by Eric Dumazet this change replaces the
#define with a static inline function to enjoy
complaints by the compiler when misusing the API.
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Seemingly innocuous sctp_trans_state_to_prio_map[] array
is way bigger than it looks, since
"[SCTP_UNKNOWN] = 2" expands into "[0xffff] = 2" !

This patch replaces it with switch() statement.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Neil Horman <nhorman@tuxdriver.com>
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
CC: linux-sctp@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a small chance that tunnel_free() is called before tunnel->del_work scheduled
resulting in a zero pointer dereference.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The size of the MAC register dump used to be the size specified by the
reg property in the device tree.  Userland has no good way of finding
out that size, and it was not specified consistently for each MAC type,
so ethtool would end up printing junk at the end of the register dump
if the device tree didn't match the size it assumed.

Using the new version numbers indicates unambiguously that the size of
the MAC register dump is dependent only on the MAC type.

Fixes: 5369c71f ("net/ibm/emac: fix size of emac dump memory areas")
Signed-off-by: Ivan Mikhaylov <ivan@ru.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Karl Heiss says:

====================
sctp: Fix SCTP deadlock

These patches fix a deadlock during accept() of an SCTP connection.

The first patch fixes whitespace issues.

The second patch actually fixes the deadlock race.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A case can occur when sctp_accept() is called by the user during
a heartbeat timeout event after the 4-way handshake.  Since
sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the
bh_sock_lock in sctp_generate_heartbeat_event() will be taken with
the listening socket but released with the new association socket.
The result is a deadlock on any future attempts to take the listening
socket lock.

Note that this race can occur with other SCTP timeouts that take
the bh_lock_sock() in the event sctp_accept() is called.

 BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0]
 ...
 RIP: 0010:[<ffffffff8152d48e>]  [<ffffffff8152d48e>] _spin_lock+0x1e/0x30
 RSP: 0018:ffff880028323b20  EFLAGS: 00000206
 RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48
 RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000
 R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0
 R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225
 FS:  0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
 CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0)
 Stack:
 ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000
 <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00
 <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8
 Call Trace:
 <IRQ>
 [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp]
 [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0
 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
 [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120
 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
 [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0
 [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0
 [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440
 [<ffffffff81497255>] ? ip_rcv+0x275/0x350
 [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750
 ...

With lockdep debugging:

 =====================================
 [ BUG: bad unlock balance detected! ]
 -------------------------------------
 CslRx/12087 is trying to release lock (slock-AF_INET) at:
 [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp]
 but there are no more locks to release!

 other info that might help us debug this:
 2 locks held by CslRx/12087:
 #0:  (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0
 #1:  (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp]

Ensure the socket taken is also the same one that is released by
saving a copy of the socket before entering the timeout event
critical section.
Signed-off-by: Karl Heiss <kheiss@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix indentation in sctp_generate_heartbeat_event.
Signed-off-by: Karl Heiss <kheiss@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's possible that while we are waiting for the spinlock, another
entity (that owns the spinlock) has shut down the admin queue.
If we then attempt to use the queue, we will panic.

Add a check for this condition on the receive side. This matches
an existing check on the send queue side.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously to this patch, the hardware was removing
VLAN tags from the inner header of VXLAN packets.  The
hardware configuration can be changed to leave the
packet alone since that is what the linux stack
expects for this type of VLAN in VXLAN packet.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs
    instead of cloning them.  From Daniel Borkmann.

 2) When converting classical BPF into eBPF, fix the setting of the
    source reg to BPF_REG_X.  From Tycho Andersen.

 3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from
    Linus Lussing.

 4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau.

 5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from
    Roopa Prabhu.

 6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai.

 7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from
    Florian Westphal.

 8) Check DMA mapping errors in bna driver, from Ivan Vecera.

 9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context,
    misclearing of interrupt status in TX timeout handler, etc.) from
    David Woodhouse.

10) In tipc, reset SKB header pointer after skb_linearize(), from Erik
    Hugne.

11) Fix autobind races et al. in netlink code, from Herbert Xu with
    help from Tejun Heo and others.

12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan.

13) Fix various races in timewait timer and reqsk_queue_hadh_req, from
    Eric Dumazet.

14) Fix array overruns in mac80211, from Johannes Berg and Dan
    Carpenter.

15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov.

16) Fix race between poll_one_napi and napi_disable, from Neil Horman.

17) Fix byte order in geneve tunnel port config, from John W Linville.

18) Fix handling of ARP replies over lightweight tunnels, from Jiri
    Benc.

19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson
    Kok and Roopa Prabhu.

20) Several reference count handling bug fixes in the PHY/MDIO layer
    from Russel King.

21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault.

22) Fix crash in icmp_route_lookup(), from David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net: Fix panic in icmp_route_lookup
  net: update docbook comment for __mdiobus_register()
  ppp: fix lockdep splat in ppp_dev_uninit()
  net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected
  phy: marvell: add link partner advertised modes
  net: fix net_device refcounting
  phy: add phy_device_remove()
  phy: fixed-phy: properly validate phy in fixed_phy_update_state()
  net: fix phy refcounting in a bunch of drivers
  of_mdio: fix MDIO phy device refcounting
  phy: add proper phy struct device refcounting
  phy: fix mdiobus module safety
  net: dsa: fix of_mdio_find_bus() device refcount leak
  phy: fix of_mdio_find_bus() device refcount leak
  ip6_tunnel: Reduce log level in ip6_tnl_err() to debug
  ip6_gre: Reduce log level in ip6gre_err() to debug
  fib_rules: fix fib rule dumps across multiple skbs
  bnx2x: byte swap rss_key to comply to Toeplitz specs
  net: revert "net_sched: move tp->root allocation into fw_init()"
  lwtunnel: remove source and destination UDP port config option
  ...

Andrey reported a panic:

[ 7249.865507] BUG: unable to handle kernel pointer dereference at 000000b4
[ 7249.865559] IP: [<c16afeca>] icmp_route_lookup+0xaa/0x320
[ 7249.865598] *pdpt = 0000000030f7f001 *pde = 0000000000000000
[ 7249.865637] Oops: 0000 [#1]
...
[ 7249.866811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
4.3.0-999-generic #201509220155
[ 7249.866876] Hardware name: MSI MS-7250/MS-7250, BIOS 080014  08/02/2006
[ 7249.866916] task: c1a5ab00 ti: c1a52000 task.ti: c1a52000
[ 7249.866949] EIP: 0060:[<c16afeca>] EFLAGS: 00210246 CPU: 0
[ 7249.866981] EIP is at icmp_route_lookup+0xaa/0x320
[ 7249.867012] EAX: 00000000 EBX: f483ba48 ECX: 00000000 EDX: f2e18a00
[ 7249.867045] ESI: 000000c0 EDI: f483ba70 EBP: f483b9ec ESP: f483b974
[ 7249.867077]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 7249.867108] CR0: 8005003b CR2: 000000b4 CR3: 36ee07c0 CR4: 000006f0
[ 7249.867141] Stack:
[ 7249.867165]  320310ee 00000000 00000042 320310ee 00000000 c1aeca00
f3920240 f0c69180
[ 7249.867268]  f483ba04 f855058b a89b66cd f483ba44 f8962f4b 00000000
e659266c f483ba54
[ 7249.867361]  8004753c f483ba5c f8962f4b f2031140 000003c1 ffbd8fa0
c16b0e00 00000064
[ 7249.867448] Call Trace:
[ 7249.867494]  [<f855058b>] ? e1000_xmit_frame+0x87b/0xdc0 [e1000e]
[ 7249.867534]  [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack]
[ 7249.867576]  [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack]
[ 7249.867615]  [<c16b0e00>] ? icmp_send+0xa0/0x380
[ 7249.867648]  [<c16b102f>] icmp_send+0x2cf/0x380
[ 7249.867681]  [<f89c8126>] nf_send_unreach+0xa6/0xc0 [nf_reject_ipv4]
[ 7249.867714]  [<f89cd0da>] reject_tg+0x7a/0x9f [ipt_REJECT]
[ 7249.867746]  [<f88c29a7>] ipt_do_table+0x317/0x70c [ip_tables]
[ 7249.867780]  [<f895e0a6>] ? __nf_conntrack_find_get+0x166/0x3b0
[nf_conntrack]
[ 7249.867838]  [<f895eea8>] ? nf_conntrack_in+0x398/0x600 [nf_conntrack]
[ 7249.867889]  [<f84c0035>] iptable_filter_hook+0x35/0x80 [iptable_filter]
[ 7249.867933]  [<c16776a1>] nf_iterate+0x71/0x80
[ 7249.867970]  [<c1677715>] nf_hook_slow+0x65/0xc0
[ 7249.868002]  [<c1681811>] __ip_local_out_sk+0xc1/0xd0
[ 7249.868034]  [<c1680f30>] ? ip_forward_options+0x1a0/0x1a0
[ 7249.868066]  [<c1681836>] ip_local_out_sk+0x16/0x30
[ 7249.868097]  [<c1684054>] ip_send_skb+0x14/0x80
[ 7249.868129]  [<c16840f4>] ip_push_pending_frames+0x34/0x40
[ 7249.868163]  [<c16844a2>] ip_send_unicast_reply+0x282/0x310
[ 7249.868196]  [<c16a0863>] tcp_v4_send_reset+0x1b3/0x380
[ 7249.868227]  [<c16a1b63>] tcp_v4_rcv+0x323/0x990
[ 7249.868257]  [<c16776a1>] ? nf_iterate+0x71/0x80
[ 7249.868289]  [<c167dc2b>] ip_local_deliver_finish+0x8b/0x230
[ 7249.868322]  [<c167df4c>] ip_local_deliver+0x4c/0xa0
[ 7249.868353]  [<c167dba0>] ? ip_rcv_finish+0x390/0x390
[ 7249.868384]  [<c167d88c>] ip_rcv_finish+0x7c/0x390
[ 7249.868415]  [<c167e280>] ip_rcv+0x2e0/0x420
...

Prior to the VRF change the oif was not set in the flow struct, so the
VRF support should really have only added the vrf_master_ifindex lookup.

Fixes: 613d09b3 ("net: Use VRF device index for lookups on TX")
Cc: Andrey Melnikov <temnota.am@gmail.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the docbook comment for __mdiobus_register() to include the new
module owner argument.  This resolves a warning found by the 0-day
builder.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull another cgroup fix from Tejun Heo:
 "The cgroup writeback support got inadvertently enabled for traditional
  hierarchies revealing two regressions which are currently being worked
  on.  It shouldn't have been enabled on traditional hierarchies, so
  disable it on them.  This is enough to make the regressions go away
  for people who aren't experimenting with cgroup"

* 'for-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup, writeback: don't enable cgroup writeback on traditional hierarchies

ppp_dev_uninit() locks all_ppp_mutex while under rtnl mutex protection.
ppp_create_interface() must then lock these mutexes in that same order
to avoid possible deadlock.

[  120.880011] ======================================================
[  120.880011] [ INFO: possible circular locking dependency detected ]
[  120.880011] 4.2.0 #1 Not tainted
[  120.880011] -------------------------------------------------------
[  120.880011] ppp-apitest/15827 is trying to acquire lock:
[  120.880011]  (&pn->all_ppp_mutex){+.+.+.}, at: [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic]
[  120.880011]
[  120.880011] but task is already holding lock:
[  120.880011]  (rtnl_mutex){+.+.+.}, at: [<ffffffff812e4255>] rtnl_lock+0x12/0x14
[  120.880011]
[  120.880011] which lock already depends on the new lock.
[  120.880011]
[  120.880011]
[  120.880011] the existing dependency chain (in reverse order) is:
[  120.880011]
[  120.880011] -> #1 (rtnl_mutex){+.+.+.}:
[  120.880011]        [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e
[  120.880011]        [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341
[  120.880011]        [<ffffffff812e4255>] rtnl_lock+0x12/0x14
[  120.880011]        [<ffffffff812d9d94>] register_netdev+0x11/0x27
[  120.880011]        [<ffffffffa0147b17>] ppp_ioctl+0x289/0xc98 [ppp_generic]
[  120.880011]        [<ffffffff8113b367>] do_vfs_ioctl+0x4ea/0x532
[  120.880011]        [<ffffffff8113b3fd>] SyS_ioctl+0x4e/0x7d
[  120.880011]        [<ffffffff813ad7d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[  120.880011]
[  120.880011] -> #0 (&pn->all_ppp_mutex){+.+.+.}:
[  120.880011]        [<ffffffff8107334e>] __lock_acquire+0xb07/0xe76
[  120.880011]        [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e
[  120.880011]        [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341
[  120.880011]        [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic]
[  120.880011]        [<ffffffff812d5263>] rollback_registered_many+0x19e/0x252
[  120.880011]        [<ffffffff812d5381>] rollback_registered+0x29/0x38
[  120.880011]        [<ffffffff812d53fa>] unregister_netdevice_queue+0x6a/0x77
[  120.880011]        [<ffffffffa0146a94>] ppp_release+0x42/0x79 [ppp_generic]
[  120.880011]        [<ffffffff8112d9f6>] __fput+0xec/0x192
[  120.880011]        [<ffffffff8112dacc>] ____fput+0x9/0xb
[  120.880011]        [<ffffffff8105447a>] task_work_run+0x66/0x80
[  120.880011]        [<ffffffff81001801>] prepare_exit_to_usermode+0x8c/0xa7
[  120.880011]        [<ffffffff81001900>] syscall_return_slowpath+0xe4/0x104
[  120.880011]        [<ffffffff813ad931>] int_ret_from_sys_call+0x25/0x9f
[  120.880011]
[  120.880011] other info that might help us debug this:
[  120.880011]
[  120.880011]  Possible unsafe locking scenario:
[  120.880011]
[  120.880011]        CPU0                    CPU1
[  120.880011]        ----                    ----
[  120.880011]   lock(rtnl_mutex);
[  120.880011]                                lock(&pn->all_ppp_mutex);
[  120.880011]                                lock(rtnl_mutex);
[  120.880011]   lock(&pn->all_ppp_mutex);
[  120.880011]
[  120.880011]  *** DEADLOCK ***

Fixes: 8cb775bc ("ppp: fix device unregistration upon netns deletion")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The builds of allmodconfig of avr32 is failing with:

drivers/net/ethernet/via/via-rhine.c:1098:2: error: implicit declaration
of function 'pci_iomap' [-Werror=implicit-function-declaration]
drivers/net/ethernet/via/via-rhine.c:1119:2: error: implicit declaration
of function 'pci_iounmap' [-Werror=implicit-function-declaration]

The generic empty pci_iomap and pci_iounmap is used only if CONFIG_PCI
is not defined and CONFIG_GENERIC_PCI_IOMAP is defined.

Add GENERIC_PCI_IOMAP in the dependency list for VIA_RHINE as we are
getting build failure when CONFIG_PCI and CONFIG_GENERIC_PCI_IOMAP both
are not defined.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Read the standard link partner advertisment registers and store it in
phydev->lp_advertising, so ethtool can report this information to
userspace via ethtool.  Zero it as per genphy if autonegotiation is
disabled.  Tested with a Marvell 88E1512 PHY.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull btrfs fixes from Chris Mason:
 "This is an assorted set I've been queuing up:

  Jeff Mahoney tracked down a tricky one where we ended up starting IO
  on the wrong mapping for special files in btrfs_evict_inode.  A few
  people reported this one on the list.

  Filipe found (and provided a test for) a difficult bug in reading
  compressed extents, and Josef fixed up some quota record keeping with
  snapshot deletion.  Chandan killed off an accounting bug during DIO
  that lead to WARN_ONs as we freed inodes"

* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: keep dropped roots in cache until transaction commit
  Btrfs: Direct I/O: Fix space accounting
  btrfs: skip waiting on ordered range for special files
  Btrfs: fix read corruption of compressed and shared extents
  Btrfs: remove unnecessary locking of cleaner_mutex to avoid deadlock
  Btrfs: don't initialize a space info as full to prevent ENOSPC

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable patches:
   - fix v4.2 SEEK on files over 2 gigs
   - Fix a layout segment reference leak when pNFS I/O falls back to inband I/O.
   - Fix recovery of recalled read delegations

  Bugfixes:
   - Fix a case where NFSv4 fails to send CLOSE after a server reboot
   - Fix sunrpc to wait for connections to complete before retrying
   - Fix sunrpc races between transport connect/disconnect and shutdown
   - Fix an infinite loop when layoutget fail with BAD_STATEID
   - nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
   - Fix a bogus WARN_ON_ONCE() in O_DIRECT when layout commit_through_mds is set
   - Fix layoutreturn/close ordering issues"

* tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS41: make close wait for layoutreturn
  NFS: Skip checking ds_cinfo.buckets when lseg's commit_through_mds is set
  NFSv4.x/pnfs: Don't try to recover stateids twice in layoutget
  NFSv4: Recovery of recalled read delegations is broken
  NFS: Fix an infinite loop when layoutget fail with BAD_STATEID
  NFS: Do cleanup before resetting pageio read/write to mds
  SUNRPC: xs_sock_mark_closed() does not need to trigger socket autoclose
  SUNRPC: Lock the transport layer on shutdown
  nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
  SUNRPC: Ensure that we wait for connections to complete before retrying
  SUNRPC: drop null test before destroy functions
  nfs: fix v4.2 SEEK on files over 2 gigs
  SUNRPC: Fix races between socket connection and destroy code
  nfs: fix pg_test page count calculation
  Failing to send a CLOSE if file is opened WRONLY and server reboots on a 4.x mount

Pull sound fixes from Takashi Iwai:
 "This ended up with a larger set of fixes than wished, unfortunately.

  As diffstat shows, the majority of changes are for various ASoC
  drivers (Realtek, Wolfson codec drivers, etc), in addition to a couple
  of HD-audio regression fixes.  All these are reasonably small and
  nothing to scare much"

* tag 'sound-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
  ALSA: hda - Disable power_save_node for Thinkpads
  ALSA: hda/tegra - async probe for avoiding module loading deadlock
  ASoC: rt5645: Prevent the pop sound in case of playback and the jack is plugging
  ASoC: rt5645: Increase the delay time to remove the pop sound
  ASoC: rt5645: Use the type SOC_DAPM_SINGLE_AUTODISABLE to prevent the weird sound in runtime of power up
  ASoC: pxa: pxa2xx-ac97: fix dma requestor lines
  MAINTAINERS: Update website and git repo for Wolfson Microelectronics
  ASoC: fsl_ssi: Fix checking of dai format for AC97 mode
  ASoC: wm0010: fix error path
  ASoC: wm0010: fix memory leak
  ASoC: wm8960: correct the max register value of mic boost pga
  ASoC: wm8962: remove 64k sample rate support
  ASoC: davinci-mcasp: Fix devm_kasprintf format string
  ASoC: fix broken pxa SoC support
  ASoC: davinci-mcasp: Set .symmetric_rates = 1 in snd_soc_dai_driver
  ASoC: au1x: psc-i2s: Fix unused variable 'ret' warning
  ASoC: SPEAr: Make SND_SPEAR_SOC select SND_SOC_GENERIC_DMAENGINE_PCM
  ASoC: mediatek: Increase periods_min in capture
  ASoC: davinci-mcasp: Revise the FIFO threshold calculation
  ASoC: wm8960: correct gain value for input PGA and add microphone PGA
  ...

Pull PCI fixes from Bjorn Helgaas:
 "These are fixes for things we merged for v4.3 (VPD, MSI, and bridge
  window management), and a new Renesas R8A7794 SoC device ID.

  Details:

  Resource management:
   - Revert pci_read_bridge_bases() unification (Bjorn Helgaas)
   - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn
     Helgaas)

  MSI:
   - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson)

  Renesas R-Car host bridge driver:
   - Add R8A7794 support (Sergei Shtylyov)

  Miscellaneous:
   - Fix devfn for VPD access through function 0 (Alex Williamson)
   - Use function 0 VPD only for identical functions (Alex Williamson)"

* tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: rcar: Add R8A7794 support
  PCI: Use function 0 VPD for identical functions, regular VPD for others
  PCI: Fix devfn for VPD access through function 0
  PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses
  PCI: Clear IORESOURCE_UNSET when clipping a bridge window
  PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"

Pull KVM fixes from Paolo Bonzini:
 "AMD fixes for bugs introduced in the 4.2 merge window, and a few PPC
  bug fixes too"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: disable halt_poll_ns as default for s390x
  KVM: x86: fix off-by-one in reserved bits check
  KVM: x86: use correct page table format to check nested page table reserved bits
  KVM: svm: do not call kvm_set_cr0 from init_vmcb
  KVM: x86: trap AMD MSRs for the TSeg base and mask
  KVM: PPC: Book3S: Take the kvm->srcu lock in kvmppc_h_logical_ci_load/store()
  KVM: PPC: Book3S HV: Pass the correct trap argument to kvmhv_commence_exit
  KVM: PPC: Book3S HV: Fix handling of interrupted VCPUs
  kvm: svm: reset mmu on VCPU reset

Pull powerpc fixes from Michael Ellerman:
 - Wire up sys_membarrier()
 - cxl: Fix lockdep warning while creating afu_err_buff from Vaibhav

* tag 'powerpc-4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  cxl: Fix lockdep warning while creating afu_err_buff attribute
  powerpc: Wire up sys_membarrier()

We observed some performance degradation on s390x with dynamic
halt polling. Until we can provide a proper fix, let's enable
halt_poll_ns as default only for supported architectures.

Architectures are now free to set their own halt_poll_ns
default value.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

29ecd660 ("KVM: x86: avoid uninitialized variable warning",
2015-09-06) introduced a not-so-subtle problem, which probably
escaped review because it was not part of the patch context.

Before the patch, leaf was always equal to iterator.level.  After,
it is equal to iterator.level - 1 in the call to is_shadow_zero_bits_set,
and when is_shadow_zero_bits_set does another "-1" the check on
reserved bits becomes incorrect.  Using "iterator.level" in the call
fixes this call trace:

WARNING: CPU: 2 PID: 17000 at arch/x86/kvm/mmu.c:3385 handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]()
Modules linked in: tun sha256_ssse3 sha256_generic drbg binfmt_misc ipv6 vfat fat fuse dm_crypt dm_mod kvm_amd kvm crc32_pclmul aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd fam15h_power amd64_edac_mod k10temp edac_core amdkfd amd_iommu_v2 radeon acpi_cpufreq
[...]
Call Trace:
  dump_stack+0x4e/0x84
  warn_slowpath_common+0x95/0xe0
  warn_slowpath_null+0x1a/0x20
  handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]
  tdp_page_fault+0x231/0x290 [kvm]
  ? emulator_pio_in_out+0x6e/0xf0 [kvm]
  kvm_mmu_page_fault+0x36/0x240 [kvm]
  ? svm_set_cr0+0x95/0xc0 [kvm_amd]
  pf_interception+0xde/0x1d0 [kvm_amd]
  handle_exit+0x181/0xa70 [kvm_amd]
  ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm]
  kvm_arch_vcpu_ioctl_run+0x6f6/0x1730 [kvm]
  ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm]
  ? preempt_count_sub+0x9b/0xf0
  ? mutex_lock_killable_nested+0x26f/0x490
  ? preempt_count_sub+0x9b/0xf0
  kvm_vcpu_ioctl+0x358/0x710 [kvm]
  ? __fget+0x5/0x210
  ? __fget+0x101/0x210
  do_vfs_ioctl+0x2f4/0x560
  ? __fget_light+0x29/0x90
  SyS_ioctl+0x4c/0x90
  entry_SYSCALL_64_fastpath+0x16/0x73
---[ end trace 37901c8686d84de6 ]---
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Intel CPUID on AMD host or vice versa is a weird case, but it can
happen.  Handle it by checking the host CPU vendor instead of the
guest's in reset_tdp_shadow_zero_bits_mask.  For speed, the
check uses the fact that Intel EPT has an X (executable) bit while
AMD NPT has NX.
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_set_cr0 may want to call kvm_zap_gfn_range and thus access the
memslots array (SRCU protected).  Using a mini SRCU critical section
is ugly, and adding it to kvm_arch_vcpu_create doesn't work because
the VMX vcpu_create callback calls synchronize_srcu.

Fixes this lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
4.3.0-rc1+ #1 Not tainted
-------------------------------
include/linux/kvm_host.h:488 suspicious rcu_dereference_check() usage!

other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-i38/17000:
 #0:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: kvm_zap_gfn_range+0x24/0x1a0 [kvm]

[...]
Call Trace:
 dump_stack+0x4e/0x84
 lockdep_rcu_suspicious+0xfd/0x130
 kvm_zap_gfn_range+0x188/0x1a0 [kvm]
 kvm_set_cr0+0xde/0x1e0 [kvm]
 init_vmcb+0x760/0xad0 [kvm_amd]
 svm_create_vcpu+0x197/0x250 [kvm_amd]
 kvm_arch_vcpu_create+0x47/0x70 [kvm]
 kvm_vm_ioctl+0x302/0x7e0 [kvm]
 ? __lock_is_held+0x51/0x70
 ? __fget+0x101/0x210
 do_vfs_ioctl+0x2f4/0x560
 ? __fget_light+0x29/0x90
 SyS_ioctl+0x4c/0x90
 entry_SYSCALL_64_fastpath+0x16/0x73
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Russell King says:

====================
Phy, mdiobus, and netdev struct device fixes

The third version of this series fixes the build error which David
identified, and drops the broken changes for the Cavium Thunger BGX
ethernet driver as this driver requires some complex changes to
resolve the leakage - and this is best done by people who can test
the driver.

Compared to v2, the only patch which has changed is patch 6
  "net: fix phy refcounting in a bunch of drivers"

I _think_ I've been able to build-test all the drivers touched by
that patch to some degree now, though several of them needed the
Kconfig hacked to allow it (not all had || COMPILE_TEST clause on
their dependencies.)

Previous cover letters below:

This is the second version of the series, with the comments David had
on the first patch fixed up.  Original series description with updated
diffstat below.

While looking at the DSA code, I noticed we have a
of_find_net_device_by_node(), and it looks like users of that are
similarly buggy - it looks like net/dsa/dsa.c is the only user.  Fix
that too.

Hi,

While looking at the phy code, I identified a number of weaknesses
where refcounting on device structures was being leaked, where
modules could be removed while in-use, and where the fixed-phy could
end up having unintended consequences caused by incorrect calls to
fixed_phy_update_state().

This patch series resolves those issues, some of which were discovered
with testing on an Armada 388 board.  Not all patches are fully tested,
particularly the one which touches several network drivers.

When resolving the struct device refcounting problems, several different
solutions were considered before settling on the implementation here -
one of the considerations was to avoid touching many network drivers.
The solution here is:

	phy_attach*() - takes a refcount
	phy_detach*() - drops the phy_attach refcount

Provided drivers always attach and detach their phys, which they should
already be doing, this should change nothing, even if they leak a refcount.

	of_phy_find_device() and of_* functions which use that take
	a refcount.  Arrange for this refcount to be dropped once
	the phy is attached.

This is the reason why the previous change is important - we can't drop
this refcount taken by of_phy_find_device() until something else holds
a reference on the device.  This resolves the leaked refcount caused by
using of_phy_connect() or of_phy_attach().

Even without the above changes, these drivers are leaking by calling
of_phy_find_device().  These drivers are addressed by adding the
appropriate release of that refcount.

The mdiobus code also suffered from the same kind of leak, but thankfully
this only happened in one place - the mdio-mux code.

I also found that the try_module_get() in the phy layer code was utterly
useless: phydev->dev.driver was guaranteed to always be NULL, so
try_module_get() was always being called with a NULL argument.  I proved
this with my SFP code, which declares its own MDIO bus - the module use
count was never incremented irrespective of how I set the MDIO bus up.
This allowed the MDIO bus code to be removed from the kernel while there
were still PHYs attached to it.

One other bug was discovered: while using in-band-status with mvneta, it
was found that if a real phy is attached with in-band-status enabled,
and another ethernet interface is using the fixed-phy infrastructure, the
interface using the fixed-phy infrastructure is configured according to
the other interface using the in-band-status - which is caused by the
fixed-phy code not verifying that the phy_device passed in is actually
a fixed-phy device, rather than a real MDIO phy.

Lastly, having mdio_bus reversing phy_device_register() internals seems
like a layering violation - it's trivial to move that code to the phy
device layer.
====================
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>