- 08 Oct, 2018 30 commits
-
-
Masaharu Hayakawa authored
SDR104, HS200 and HS400 need to check for SCC error. If SCC error is detected, retuning is necessary. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> [Niklas: update commit message] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masaharu Hayakawa authored
Checking for SCC error during retuning is unnecessary. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> [Niklas: fix small style issue] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Niklas Söderlund authored
Add a helper to allow host drivers checking if a retune is in progress. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masahiro Yamada authored
for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1) clock <<= 1; ... is too tricky, hence I replaced with roundup_pow_of_two(divisor) >> 2 '(clk >> 22) & 0x1' is the bit test for the 1/1 divisor, but it is not clear. 'divisor <= 1' is easier to understand. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masahiro Yamada authored
renesas_sdhi_clk_start() and renesas_sdhi_clk_stop() are now only called from renesas_sdhi_set_clock(). Merge them. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Jisheng Zhang authored
When using DMA, if the DMA addr spans 128MB boundary, we have to split the DMA transfer into two so that each one doesn't exceed the boundary. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Jisheng Zhang authored
Add this hook so that it can be overridden with driver specific implementations. We also let the original sdhci_adma_write_desc() accept &desc so that the function can set its new value. Then export the function so that it could be reused by driver's specific implementations. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Jisheng Zhang authored
This patch adds adma_table_cnt member to struct sdhci_host to give more flexibility to drivers to control the ADMA table count. Default value of adma_table_cnt is set to (SDHCI_MAX_SEGS * 2 + 1). Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hu Ziji <huziji@marvell.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Allow SDHCI drivers to hook code before and after sdhci_request() by making it externally visible. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Wang Dongsheng authored
After host requests RESET_FOR_ALL action, the hardware output an interrupt for OS and waiting for the OS to approve. Before writing this fix, ACPI GED has handled the interrupt. But the ACPI GED belongs to a slow process, and sometimes the handling process time is more than 100ms(Mutex wait more than 100ms). So drop the GED solution and add this quirk fix. Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Wang Dongsheng authored
The device specific resource can be free in free_slot after removing host controller. Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Yinbo Zhu authored
In tuning mode of operation, when TBCTL[TB_EN] is set, eSDHC may report one of the following errors : 1)Tuning error while running tuning operation where SYSCTL2[SAMPCLKSEL] will not get set even when SYSCTL2[EXTN] is reset. OR 2)Data transaction error (e.g. IRQSTAT[DCE], IRQSTAT[DEBE]) during data transaction errors. This issue occurs when the data window sampled within eSDHC is in full cycle. So, in that case, eSDHC is not able to find out the start and end points of the data window and sets the sampling pointer at default location (which is middle of the internal SD clock). If this sampling point coincides with the data eye boundary, then it can result in the above mentioned errors. Impact: Tuning mode of operation for SDR50, SDR104 or HS200 speed modes may not work properly Workaround: In case eSDHC reports tuning error or data errors in tuning mode of operation, by add the erratum A008171 support to fix the issue. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Yinbo Zhu authored
This patch is to add tuning error codes to judge tuning state Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masahiro Yamada authored
Here is another TMIO MMC variant found in Socionext UniPhier SoCs. As commit b6147490 ("mmc: tmio: split core functionality, DMA and MFD glue") said, these MMC controllers use the IP from Panasonic. However, the MMC controller in the TMIO (Toshiba Mobile IO) MFD chip was the first upstreamed user of this IP. The common driver code for this IP is now called 'tmio-mmc-core' in Linux although it is a historical misnomer. Anyway, this driver select's MMC_TMIO_CORE to borrow the common code from tmio-mmc-core.c Older UniPhier SoCs (LD4, Pro4, sLD8) support the external DMA engine like renesas_sdhi_sys_dmac.c. The difference is UniPhier SoCs use a single DMA channel whereas Renesas chips request separate channels for RX and TX. Newer UniPhier SoCs (Pro5 and later) support the internal DMA engine like renesas_sdhi_internal_dmac.c The register map is almost the same, so I guess Renesas and Socionext use the same internal DMA hardware. The main difference is, the register offsets are doubled for Renesas. Renesas Socionext SDHI UniPhier DM_CM_DTRAN_MODE 0x820 0x410 DM_CM_DTRAN_CTRL 0x828 0x414 DM_CM_RST 0x830 0x418 DM_CM_INFO1 0x840 0x420 DM_CM_INFO1_MASK 0x848 0x424 DM_CM_INFO2 0x850 0x428 DM_CM_INFO2_MASK 0x858 0x42c DM_DTRAN_ADDR 0x880 0x440 DM_DTRAN_ADDREX --- 0x444 This comes from the difference of host->bus_shift; 2 for Renesas SoCs, and 1 for UniPhier SoCs. Also, the datasheet for UniPhier SoCs defines DM_DTRAN_ADDR and DM_DTRAN_ADDREX as two separate registers. It could be possible to factor out the DMA common code by introducing some hooks to cope with platform quirks, but this patch does not touch that for now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masahiro Yamada authored
This SD/eMMC controller is used for UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masahiro Yamada authored
tmio_mmc_set_clock() is full of quirks because different SoC vendors extended this in different ways. The original IP defines the divisor range 1/2 ... 1/512. bit 7 is set: 1/512 bit 6 is set: 1/256 ... bit 0 is set: 1/4 all bits clear: 1/2 It is platform-dependent how to achieve the 1/1 clock. I guess the TMIO-MFD variant uses the clock selector outside of this IP, as far as I see tmio_core_mmc_clk_div() in drivers/mfd/tmio_core.c I guess bit[7:0]=0xff is Renesas-specific extension. Socionext (and Panasonic) uses bit 10 (CLKSEL) for 1/1. Also, newer versions of UniPhier SoC variants use bit 16 for 1/1024. host->clk_update() is only used by the Renesas variants, whereas host->set_clk_div() is only used by the TMIO-MFD variants. To cope with this mess, promote tmio_mmc_set_clock() to a new platform hook ->set_clock(), and melt the old two hooks into it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masahiro Yamada authored
tmio_mmc_clk_stop(host) is equivalent to tmio_mmc_set_clock(host, 0). This replacement is needed for the next commit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Paul Cercueil authored
The JZ4725B is the first JZ SoC version that introduced a 32-bit IMASK register, not the JZ4750. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Sergei Shtylyov authored
Document the R-Car V3M (R8A77970) SoC in the R-Car SDHI bindings -- it's the usual R-Car gen3 compatible controller with the internal DMA engine. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
-
Sergei Shtylyov authored
I've successfully tested eMMC on the V3H Starter Kit board and since the R8A77970 SoC has a single SDHI core, it can't be a subject to the known RX DMA errata. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
-
Sergei Shtylyov authored
Remove the stray underscore in the DM_CM_DTRAN_MODE.BUS_WIDTH register field name and fix the typo in the comment of the #define DTRAN_MODE_CH_NUM_CH1. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Paul Cercueil authored
Depending on MACH_JZ4740 | MACH_JZ4780 prevent us from creating a generic kernel that works on more than one MIPS board. Instead, we just depend on MIPS being set. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Igor Opaniuk authored
Enable access to the RPMB on the on-board eMMC of the Poplar board. Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Fabrizio Castro authored
Document RZ/G2M (R8A774A1) SoC bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Fabrizio Castro authored
We need r8a774a1 to be whitelisted for SDHI to work on the RZ/G2M, but we don't care about the revision of the SoC, so just whitelist the generic part number. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Michal Simek authored
When mmc-pwrseq property is passed mmc_pwrseq_alloc() can return -EPROBE_DEFER because driver for power sequence provider is not probed yet. Do not show error message when this situation happens. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Srinath Mannam authored
Add ACPI support to all IPROC SDHCI variants. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Adrian Hunter authored
Convert DT properties to generic device properties so that drivers can get properties from DT or ACPI. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
- 07 Oct, 2018 7 commits
-
-
Greg Kroah-Hartman authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscGreg Kroah-Hartman authored
I wrote: "Char/Misc fixes for 4.19-rc7 Here are 8 small fixes for some char/misc driver issues Included here are: - fpga driver fixes - thunderbolt bugfixes - firmware core revert/fix - hv core fix - hv tool fix All of these have been in linux-next with no reported issues." * tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Initialize after IOMMUs thunderbolt: Do not handle ICM events after domain is stopped firmware: Always initialize the fw_priv list object docs: fpga: document fpga manager flags fpga: bridge: fix obvious function documentation error tools: hv: fcopy: set 'error' in case an unknown operation was requested fpga: do not access region struct after fpga_region_unregister Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyGreg Kroah-Hartman authored
I wrote: "Serial driver fixes for 4.19-rc7 Here are 3 small serial driver fixes for 4.19-rc7 - 2 sh-sci bugfixes for reported issues - a revert of the PM handling for the 8250_dw code All of these have been in linux-next with no reported issues." * tag 'tty-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: sh-sci: Allow for compressed SCIF address" Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE" Revert "serial: 8250_dw: Fix runtime PM handling"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbGreg Kroah-Hartman authored
I wrote: "USB fixes for 4.19-rc7 Here are some small USB fixes for 4.19-rc7 These include: - the usual xhci bugfixes for reported issues - some new serial driver device ids - bugfix for the option serial driver for some devices - bugfix for the cdc_acm driver that has been there for a long time. All of these have been in linux-next for a while with no reported issues." * tag 'usb-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci-mtk: resume USB3 roothub first xhci: Add missing CAS workaround for Intel Sunrise Point xHCI usb: cdc_acm: Do not leak URB buffers USB: serial: simple: add Motorola Tetra MTP6550 id USB: serial: option: add two-endpoints device-id flag USB: serial: option: improve Quectel EP06 detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxGreg Kroah-Hartman authored
Wolfram writes: "i2c for 4.19 I2C has three driver bugfixes and a fix for a typo for you." * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Call i2c_dw_clk_rate() only when calculating timings i2c: i2c-scmi: fix for i2c_smbus_write_block_data i2c: i2c-isch: fix spelling mistake "unitialized" -> "uninitialized" i2c: i2c-qcom-geni: Properly handle DMA safe buffers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiGreg Kroah-Hartman authored
James writes: "SCSI fixes on 20181006 Small fix for an unititialized mutex in the qedi driver." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Initialize the stats mutex lock
-
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxGreg Kroah-Hartman authored
Michael writes: "powerpc fixes for 4.19 #4 Four regression fixes. A fix for a change to lib/xz which broke our zImage loader when building with XZ compression. OK'ed by Herbert who merged the original patch. The recent fix we did to avoid patching __init text broke some 32-bit machines, fix that. Our show_user_instructions() could be tricked into printing kernel memory, add a check to avoid that. And a fix for a change to our NUMA initialisation logic, which causes crashes in some kdump configurations. Thanks to: Christophe Leroy, Hari Bathini, Jann Horn, Joel Stanley, Meelis Roos, Murilo Opsfelder Araujo, Srikar Dronamraju." * tag 'powerpc-4.19-4' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/numa: Skip onlining a offline node in kdump path powerpc: Don't print kernel instructions in show_user_instructions() powerpc/lib: fix book3s/32 boot failure due to code patching lib/xz: Put CRC32_POLY_LE in xz_private.h
-
- 06 Oct, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman authored
Dave writes: "Networking fixes: 1) Fix truncation of 32-bit right shift in bpf, from Jann Horn. 2) Fix memory leak in wireless wext compat, from Stefan Seyfried. 3) Use after free in cfg80211's reg_process_hint(), from Yu Zhao. 4) Need to cancel pending work when unbinding in smsc75xx otherwise we oops, also from Yu Zhao. 5) Don't allow enslaving a team device to itself, from Ido Schimmel. 6) Fix backwards compat with older userspace for rtnetlink FDB dumps. From Mauricio Faria. 7) Add validation of tc policy netlink attributes, from David Ahern. 8) Fix RCU locking in rawv6_send_hdrinc(), from Wei Wang." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: mvpp2: Extract the correct ethtype from the skb for tx csum offload ipv6: take rcu lock in rawv6_send_hdrinc() net: sched: Add policy validation for tc attributes rtnetlink: fix rtnl_fdb_dump() for ndmsg header yam: fix a missing-check bug net: bpfilter: Fix type cast and pointer warnings net: cxgb3_main: fix a missing-check bug bpf: 32-bit RSH verification must truncate input before the ALU op net: phy: phylink: fix SFP interface autodetection be2net: don't flip hw_features when VXLANs are added/deleted net/packet: fix packet drop as of virtio gso net: dsa: b53: Keep CPU port as tagged in all VLANs openvswitch: load NAT helper bnxt_en: get the reduced max_irqs by the ones used by RDMA bnxt_en: free hwrm resources, if driver probe fails. bnxt_en: Fix enables field in HWRM_QUEUE_COS2BW_CFG request bnxt_en: Fix VNIC reservations on the PF. team: Forbid enslaving team device to itself net/usb: cancel pending work when unbinding smsc75xx mlxsw: spectrum: Delete RIF when VLAN device is removed ...
-
- 05 Oct, 2018 2 commits
-
-
Greg Kroah-Hartman authored
* akpm: mm: madvise(MADV_DODUMP): allow hugetlbfs pages ocfs2: fix locking for res->tracking and dlm->tracking_list mm/vmscan.c: fix int overflow in callers of do_shrink_slab() mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly mm/vmstat.c: fix outdated vmstat_text proc: restrict kernel stack dumps to root mm/hugetlb: add mmap() encodings for 32MB and 512MB page sizes mm/migrate.c: split only transparent huge pages when allocation fails ipc/shm.c: use ERR_CAST() for shm_lock() error return mm/gup_benchmark: fix unsigned comparison to zero in __gup_benchmark_ioctl mm, thp: fix mlocking THP page with migration enabled ocfs2: fix crash in ocfs2_duplicate_clusters_by_page() hugetlb: take PMD sharing into account when flushing tlb/caches mm: migration: fix migration of huge PMD shared pages
-
Daniel Black authored
Reproducer, assuming 2M of hugetlbfs available: Hugetlbfs mounted, size=2M and option user=testuser # mount | grep ^hugetlbfs hugetlbfs on /dev/hugepages type hugetlbfs (rw,pagesize=2M,user=dan) # sysctl vm.nr_hugepages=1 vm.nr_hugepages = 1 # grep Huge /proc/meminfo AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 1 HugePages_Free: 1 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 2048 kB Code: #include <sys/mman.h> #include <stddef.h> #define SIZE 2*1024*1024 int main() { void *ptr; ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_HUGETLB | MAP_ANONYMOUS, -1, 0); madvise(ptr, SIZE, MADV_DONTDUMP); madvise(ptr, SIZE, MADV_DODUMP); } Compile and strace: mmap(NULL, 2097152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_HUGETLB, -1, 0) = 0x7ff7c9200000 madvise(0x7ff7c9200000, 2097152, MADV_DONTDUMP) = 0 madvise(0x7ff7c9200000, 2097152, MADV_DODUMP) = -1 EINVAL (Invalid argument) hugetlbfs pages have VM_DONTEXPAND in the VmFlags driver pages based on author testing with analysis from Florian Weimer[1]. The inclusion of VM_DONTEXPAND into the VM_SPECIAL defination was a consequence of the large useage of VM_DONTEXPAND in device drivers. A consequence of [2] is that VM_DONTEXPAND marked pages are unable to be marked DODUMP. A user could quite legitimately madvise(MADV_DONTDUMP) their hugetlbfs memory for a while and later request that madvise(MADV_DODUMP) on the same memory. We correct this omission by allowing madvice(MADV_DODUMP) on hugetlbfs pages. [1] https://stackoverflow.com/questions/52548260/madvisedodump-on-the-same-ptr-size-as-a-successful-madvisedontdump-fails-wit [2] commit 0103bd16 ("mm: prepare VM_DONTDUMP for using in drivers") Link: http://lkml.kernel.org/r/20180930054629.29150-1-daniel@linux.ibm.com Link: https://lists.launchpad.net/maria-discuss/msg05245.html Fixes: 0103bd16 ("mm: prepare VM_DONTDUMP for using in drivers") Reported-by: Kenneth Penza <kpenza@gmail.com> Signed-off-by: Daniel Black <daniel@linux.ibm.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-