- 21 Apr, 2020 17 commits
-
-
Sean Christopherson authored
Handle the side effects of a fast CR3 (PGD) switch up a level in __kvm_mmu_new_cr3(), which is the only caller of fast_cr3_switch(). This consolidates handling all side effects in __kvm_mmu_new_cr3() (where freeing the current root when KVM can't do a fast switch is already handled), and ameliorates the pain of adding a second boolean in a future patch to provide a separate "skip" override for the MMU sync. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200320212833.3507-31-sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Don't reload the APIC access page if its control is disabled, e.g. if the guest is running with x2APIC (likely) or with the local APIC disabled (unlikely), to avoid unnecessary TLB flushes and VMWRITEs. Unconditionally reload the APIC access page and flush the TLB when the guest's virtual APIC transitions to "xAPIC enabled", as any changes to the APIC access page's mapping will not be recorded while the guest's virtual APIC is disabled. Signed-off-by:
-
Sean Christopherson authored
Move the retrieval of the HPA associated with L1's APIC access page into VMX code to avoid unnecessarily calling gfn_to_page(), e.g. when the vCPU is in guest mode (L2). Alternatively, the optimization logic in VMX could be mirrored into the common x86 code, but that will get ugly fast when further optimizations are introduced. Signed-off-by:
-
Sean Christopherson authored
Defer reloading L1's APIC page by logging the need for a reload and processing it during nested VM-Exit instead of unconditionally reloading the APIC page on nested VM-Exit. This eliminates a TLB flush on the majority of VM-Exits as the APIC page rarely needs to be reloaded. Signed-off-by:
-
Sean Christopherson authored
Flush only the current context, as opposed to all contexts, when requesting a TLB flush to handle the scenario where a L1 does not expect a TLB flush, but one is required because L1 and L2 shared an ASID. This occurs if EPT is disabled (no per-EPTP tag), VPID is enabled (hardware doesn't flush unconditionally) and vmcs02 does not have its own VPID due to exhaustion of available VPIDs. Signed-off-by:
-
Sean Christopherson authored
Flush only the current ASID/context when requesting a TLB flush due to a change in the current vCPU's MMU to avoid blasting away TLB entries associated with other ASIDs/contexts, e.g. entries cached for L1 when a change in L2's MMU requires a flush. Signed-off-by:
-
Sean Christopherson authored
Add KVM_REQ_TLB_FLUSH_CURRENT to allow optimized TLB flushing of VMX's EPTP/VPID contexts[*] from the KVM MMU and/or in a deferred manner, e.g. to flush L2's context during nested VM-Enter. Convert KVM_REQ_TLB_FLUSH to KVM_REQ_TLB_FLUSH_CURRENT in flows where the flush is directly associated with vCPU-scoped instruction emulation, i.e. MOV CR3 and INVPCID. Add a comment in vmx_vcpu_load_vmcs() above its KVM_REQ_TLB_FLUSH to make it clear that it deliberately requests a flush of all contexts. Service any pending flush request on nested VM-Exit as it's possible a nested VM-Exit could occur after requesting a flush for L2. Add the same logic for nested VM-Enter even though it's _extremely_ unlikely for flush to be pending on nested VM-Enter, but theoretically possible (in the future) due to RSM (SMM) emulation. [*] Intel also has an Address Space Identifier (ASID) concept, e.g. EPTP+VPID+PCID == ASID, it's just not documented in the SDM because the rules of invalidation are different based on which piece of the ASID is being changed, i.e. whether the EPTP, VPID, or PCID context must be invalidated. Signed-off-by: -
Sean Christopherson authored
Add a helper to determine whether or not a full TLB flush needs to be performed on nested VM-Enter/VM-Exit, as the logic is identical for both flows and needs a fairly beefy comment to boot. This also provides a common point to make future adjustments to the logic. Handle vpid12 changes the new helper as well even though it is specific to VM-Enter. The vpid12 logic is an extension of the flushing logic, and it's worth the extra bool parameter to provide a single location for the flushing logic. Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Sean Christopherson authored
Rename ->tlb_flush() to ->tlb_flush_all() in preparation for adding a new hook to flush only the current ASID/context. Opportunstically replace the comment in vmx_flush_tlb() that explains why it flushes all EPTP/VPID contexts with a comment explaining why it unconditionally uses INVEPT when EPT is enabled. I.e. rely on the "all" part of the name to clarify why it does global INVEPT/INVVPID. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add a comment in svm_flush_tlb() to document why it flushes only the current ASID, even when it is invoked when flushing remote TLBs. Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Add a helper to flush TLB entries only for the current EPTP/VPID context and use it for the existing direct invocations of vmx_flush_tlb(). TLB flushes that are specific to the current vCPU state do not need to flush other contexts. Note, both converted call sites happen to be related to the APIC access page, this is purely coincidental. Signed-off-by:
-
Sean Christopherson authored
Move nested_get_vpid02() to vmx/nested.h so that a future patch can reference it from vmx.c to implement context-specific TLB flushing. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move vmx_flush_tlb() to vmx.c and make it non-inline static now that all its callers live in vmx.c. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use svm_flush_tlb() directly for kvm_x86_ops->tlb_flush_guest() now that the @invalidate_gpa param to ->tlb_flush() is gone, i.e. the wrapper for ->tlb_flush_guest() is no longer necessary. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Drop @invalidate_gpa from ->tlb_flush() and kvm_vcpu_flush_tlb() now that all callers pass %true for said param, or ignore the param (SVM has an internal call to svm_flush_tlb() in svm_flush_tlb_guest that somewhat arbitrarily passes %false). Remove __vmx_flush_tlb() as it is no longer used. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Refactor vmx_flush_tlb_gva() to remove a superfluous local variable and clean up its comment, which is oddly located below the code it is commenting. No functional change intended. Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
-
Vitaly Kuznetsov authored
Hyper-V PV TLB flush mechanism does TLB flush on behalf of the guest so doing tlb_flush_all() is an overkill, switch to using tlb_flush_guest() (just like KVM PV TLB flush mechanism) instead. Introduce KVM_REQ_HV_TLB_FLUSH to support the change. Signed-off-by:
-
- 20 Apr, 2020 10 commits
-
-
Sean Christopherson authored
Add a dedicated hook to handle flushing TLB entries on behalf of the guest, i.e. for a paravirtualized TLB flush, and use it directly instead of bouncing through kvm_vcpu_flush_tlb(). For VMX, change the effective implementation implementation to never do INVEPT and flush only the current context, i.e. to always flush via INVVPID(SINGLE_CONTEXT). The INVEPT performed by __vmx_flush_tlb() when @invalidate_gpa=false and enable_vpid=0 is unnecessary, as it will only flush guest-physical mappings; linear and combined mappings are flushed by VM-Enter when VPID is disabled, and changes in the guest pages tables do not affect guest-physical mappings. When EPT and VPID are enabled, doing INVVPID is not required (by Intel's architecture) to invalidate guest-physical mappings, i.e. TLB entries that cache guest-physical mappings can live across INVVPID as the mappings are associated with an EPTP, not a VPID. The intent of @invalidate_gpa is to inform vmx_flush_tlb() that it must "invalidate gpa mappings", i.e. do INVEPT and not simply INVVPID. Other than nested VPID handling, which now calls vpid_sync_context() directly, the only scenario where KVM can safely do INVVPID instead of INVEPT (when EPT is enabled) is if KVM is flushing TLB entries from the guest's perspective, i.e. is only required to invalidate linear mappings. For SVM, flushing TLB entries from the guest's perspective can be done by flushing the current ASID, as changes to the guest's page tables are associated only with the current ASID. Adding a dedicated ->tlb_flush_guest() paves the way toward removing @invalidate_gpa, which is a potentially dangerous control flag as its meaning is not exactly crystal clear, even for those who are familiar with the subtleties of what mappings Intel CPUs are/aren't allowed to keep across various invalidation scenarios. Signed-off-by:
-
Sean Christopherson authored
Use vpid_sync_vcpu_addr() to emulate the "individual address" variant of INVVPID now that said function handles the fallback case of the (host) CPU not supporting "individual address". Note, the "vpid == 0" checks in the vpid_sync_*() helpers aren't actually redundant with the "!operand.vpid" check in handle_invvpid(), as the vpid passed to vpid_sync_vcpu_addr() is a KVM (host) controlled value, i.e. vpid02 can be zero even if operand.vpid is non-zero. No functional change intended. Reviewed-by:
-
Sean Christopherson authored
Remove the INVVPID capabilities checks from vpid_sync_vcpu_single() and vpid_sync_vcpu_global() now that all callers ensure the INVVPID variant is supported. Note, in some cases the guarantee is provided in concert with hardware_setup(), which enables VPID if and only if at least of invvpid_single() or invvpid_global() is supported. Drop the WARN_ON_ONCE() from vmx_flush_tlb() as vpid_sync_vcpu_single() will trigger a WARN() on INVVPID failure, i.e. if SINGLE_CONTEXT isn't supported. Signed-off-by:
-
Sean Christopherson authored
Directly invoke vpid_sync_context() to do a global INVVPID when the individual address variant is not supported instead of deferring such behavior to the caller. This allows for additional consolidation of code as the logic is basically identical to the emulation of the individual address variant in handle_invvpid(). No functional change intended. Reviewed-by:
Miaohe Lin <linmiaohe@huawei.com> Reviewed-by:
-
Sean Christopherson authored
Move vpid_sync_vcpu_addr() below vpid_sync_context() so that it can be refactored in a future patch to call vpid_sync_context() directly when the "individual address" INVVPID variant isn't supported. No functional change intended. Reviewed-by:
-
Sean Christopherson authored
Use vpid_sync_context() directly for flows that run if and only if enable_vpid=1, or more specifically, nested VMX flows that are gated by vmx->nested.msrs.secondary_ctls_high.SECONDARY_EXEC_ENABLE_VPID being set, which is allowed if and only if enable_vpid=1. Because these flows call __vmx_flush_tlb() with @invalidate_gpa=false, the if-statement that decides between INVEPT and INVVPID will always go down the INVVPID path, i.e. call vpid_sync_context() because "enable_ept && (invalidate_gpa || !enable_vpid)" always evaluates false. This helps pave the way toward removing @invalidate_gpa and @vpid from __vmx_flush_tlb() and its callers. Opportunstically drop unnecessary brackets in handle_invvpid() around an affected __vmx_flush_tlb()->vpid_sync_context() conversion. No functional change intended. Reviewed-by:
-
Sean Christopherson authored
Skip the global INVVPID in the unlikely scenario that vpid==0 and the SINGLE_CONTEXT variant of INVVPID is unsupported. If vpid==0, there's no need to INVVPID as it's impossible to do VM-Enter with VPID enabled and vmcs.VPID==0, i.e. there can't be any TLB entries for the vCPU with vpid==0. The fact that the SINGLE_CONTEXT variant isn't supported is irrelevant. Signed-off-by:
-
Junaid Shahid authored
When injecting a page fault or EPT violation/misconfiguration, KVM is not syncing any shadow PTEs associated with the faulting address, including those in previous MMUs that are associated with L1's current EPTP (in a nested EPT scenario), nor is it flushing any hardware TLB entries. All this is done by kvm_mmu_invalidate_gva. Page faults that are either !PRESENT or RSVD are exempt from the flushing, as the CPU is not allowed to cache such translations. Signed-off-by:
Junaid Shahid <junaids@google.com> Co-developed-by:
-
Paolo Bonzini authored
To reconstruct the kvm_mmu to be used for page fault injection, we can simply use fault->nested_page_fault. This matches how fault->nested_page_fault is assigned in the first place by FNAME(walk_addr_generic). Signed-off-by: -
Paolo Bonzini authored
Wrap the combination of mmu->invlpg and kvm_x86_ops->tlb_flush_gva into a new function. This function also lets us specify the host PGD to invalidate and also the MMU, both of which will be useful in fixing and simplifying kvm_inject_emulated_page_fault. A nested guest's MMU however has g_context->invlpg == NULL. Instead of setting it to nonpaging_invlpg, make kvm_mmu_invalidate_gva the only entry point to mmu->invlpg and make a NULL invlpg pointer equivalent to nonpaging_invlpg, saving a retpoline. Signed-off-by:
-
- 15 Apr, 2020 13 commits
-
-
Sean Christopherson authored
Export the page fault propagation helper so that VMX can use it to correctly emulate TLB invalidation on page faults in an upcoming patch. In the (hopefully) not-too-distant future, SGX virtualization will also want access to the helper for injecting page faults to the correct level (L1 vs. L2) when emulating ENCLS instructions. Rename the function to kvm_inject_emulated_page_fault() to clarify that it is (a) injecting a fault and (b) only for page faults. WARN if it's invoked with an exception other than PF_VECTOR. Signed-off-by:
-
Junaid Shahid authored
Free all roots when emulating INVVPID for L1 and EPT is disabled, as outstanding changes to the page tables managed by L1 need to be recognized. Because L1 and L2 share an MMU when EPT is disabled, and because VPID is not tracked by the MMU role, all roots in the current MMU (root_mmu) need to be freed, otherwise a future nested VM-Enter or VM-Exit could do a fast CR3 switch (without a flush/sync) and consume stale SPTEs. Fixes: 5c614b35 ("KVM: nVMX: nested VPID emulation") Signed-off-by:
-
Sean Christopherson authored
Free all L2 (guest_mmu) roots when emulating INVEPT for L1. Outstanding changes to the EPT tables managed by L1 need to be recognized, and relying on KVM to always flush L2's EPTP context on nested VM-Enter is dangerous. Similar to handle_invpcid(), rely on kvm_mmu_free_roots() to do a remote TLB flush if necessary, e.g. if L1 has never entered L2 then there is nothing to be done. Nuking all L2 roots is overkill for the single-context variant, but it's the safe and easy bet. A more precise zap mechanism will be added in the future. Add a TODO to call out that KVM only needs to invalidate affected contexts. Fixes: 14c07ad8 ("x86/kvm/mmu: introduce guest_mmu") Reported-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Sean Christopherson authored
Signal VM-Fail for the single-context variant of INVEPT if the specified EPTP is invalid. Per the INEVPT pseudocode in Intel's SDM, it's subject to the standard EPT checks: If VM entry with the "enable EPT" VM execution control set to 1 would fail due to the EPTP value then VMfail(Invalid operand to INVEPT/INVVPID); Fixes: bfd0a56b ("nEPT: Nested INVEPT") Signed-off-by:
-
Sean Christopherson authored
Flush all EPTP/VPID contexts if a TLB flush _may_ have been triggered by a remote or deferred TLB flush, i.e. by KVM_REQ_TLB_FLUSH. Remote TLB flushes require all contexts to be invalidated, not just the active contexts, e.g. all mappings in all contexts for a given HVA need to be invalidated on a mmu_notifier invalidation. Similarly, the instigator of the deferred TLB flush may be expecting all contexts to be flushed, e.g. vmx_vcpu_load_vmcs(). Without nested VMX, flushing only the current EPTP/VPID context isn't problematic because KVM uses a constant VPID for each vCPU, and mmu_alloc_direct_roots() all but guarantees KVM will use a single EPTP for L1. In the rare case where a different EPTP is created or reused, KVM (currently) unconditionally flushes the new EPTP context prior to entering the guest. With nested VMX, KVM conditionally uses a different VPID for L2, and unconditionally uses a different EPTP for L2. Because KVM doesn't _intentionally_ guarantee L2's EPTP/VPID context is flushed on nested VM-Enter, it'd be possible for a malicious L1 to attack the host and/or different VMs by exploiting the lack of flushing for L2. 1) Launch nested guest from malicious L1. 2) Nested VM-Enter to L2. 3) Access target GPA 'g'. CPU inserts TLB entry tagged with L2's ASID mapping 'g' to host PFN 'x'. 2) Nested VM-Exit to L1. 3) L1 triggers kernel same-page merging (ksm) by duplicating/zeroing the page for PFN 'x'. 4) Host kernel merges PFN 'x' with PFN 'y', i.e. unmaps PFN 'x' and remaps the page to PFN 'y'. mmu_notifier sends invalidate command, KVM flushes TLB only for L1's ASID. 4) Host kernel reallocates PFN 'x' to some other task/guest. 5) Nested VM-Enter to L2. KVM does not invalidate L2's EPTP or VPID. 6) L2 accesses GPA 'g' and gains read/write access to PFN 'x' via its stale TLB entry. However, current KVM unconditionally flushes L1's EPTP/VPID context on nested VM-Exit. But, that behavior is mostly unintentional, KVM doesn't go out of its way to flush EPTP/VPID on nested VM-Enter/VM-Exit, rather a TLB flush is guaranteed to occur prior to re-entering L1 due to __kvm_mmu_new_cr3() always being called with skip_tlb_flush=false. On nested VM-Enter, this happens via kvm_init_shadow_ept_mmu() (nested EPT enabled) or in nested_vmx_load_cr3() (nested EPT disabled). On nested VM-Exit it occurs via nested_vmx_load_cr3(). This also fixes a bug where a deferred TLB flush in the context of L2, with EPT disabled, would flush L1's VPID instead of L2's VPID, as vmx_flush_tlb() flushes L1's VPID regardless of is_guest_mode(). Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Ben Gardon <bgardon@google.com> Cc: Jim Mattson <jmattson@google.com> Cc: Junaid Shahid <junaids@google.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: John Haxby <john.haxby@oracle.com> Reviewed-by:Liran Alon <liran.alon@oracle.com> Fixes: efebf0aa ("KVM: nVMX: Do not flush TLB on L1<->L2 transitions if L1 uses VPID and EPT") Signed-off-by:
-
Wainer dos Santos Moschetta authored
This patch introduces test_add_max_memory_regions(), which checks that a VM can have added memory slots up to the limit defined in KVM_CAP_NR_MEMSLOTS. Then attempt to add one more slot to verify it fails as expected. Signed-off-by:
Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Make set_memory_region_test available on all architectures by wrapping the bits that are x86-specific in ifdefs. A future testcase to create the maximum number of memslots will be architecture agnostic. Signed-off-by:
-
Sean Christopherson authored
Add a testcase for running a guest with no memslots to the memory region test. The expected result on x86_64 is that the guest will trigger an internal KVM error due to the initial code fetch encountering a non-existent memslot and resulting in an emulation failure. Signed-off-by:
-
Wainer dos Santos Moschetta authored
Introduces the vm_get_fd() function in kvm_util which returns the VM file descriptor. Reviewed-by:
-
Sean Christopherson authored
Add a testcase for deleting memslots while the guest is running. Like the "move" testcase, this is x86_64-only as it relies on MMIO happening when a non-existent memslot is encountered. Signed-off-by:
-
Sean Christopherson authored
Use sem_post() and sem_timedwait() to synchronize test stages between the vCPU thread and the main thread instead of using usleep() to wait for the vCPU thread and hoping for the best. Opportunistically refactor the code to make it suck less in general, and to prepare for adding more testcases. Suggested-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Add variants of GUEST_ASSERT to pass values back to the host, e.g. to help debug/understand a failure when the the cause of the assert isn't necessarily binary. It'd probably be possible to auto-calculate the number of arguments and just have a single GUEST_ASSERT, but there are a limited number of variants and silently eating arguments could lead to subtle code bugs. Signed-off-by:
-
Sean Christopherson authored
Add a utility to delete a memory region, it will be used by x86's set_memory_region_test. Signed-off-by:
-
