- 03 Dec, 2006 35 commits
-
-
Thomas Graf authored
Move mark selector currently implemented per protocol into the protocol independant part. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
For the sake of consistency. Signed-off-by:
-
Thomas Graf authored
Now that all protocols have been made aware of the mark field it can be moved out of the union thus simplyfing its usage. The config options in the IPv4/IPv6/DECnet subsystems to enable respectively disable mark based routing only obfuscate the code with ifdefs, the cost for the additional comparison in the flow key is insignificant, and most distributions have all these options enabled by default anyway. Therefore it makes sense to remove the config options and enable mark based routing by default. Signed-off-by:
-
Thomas Graf authored
nfmark is being used in various subsystems and has become the defacto mark field for all kinds of packets. Therefore it makes sense to rename it to `mark' and remove the dependency on CONFIG_NETFILTER. Signed-off-by:
-
Ralf Baechle authored
When dn_neigh.c was converted from kmalloc to kzalloc in commit 0da974f4 it was missed that dn_neigh_seq_open was actually clearing the allocation twice was missed. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Andrew Morton authored
Six callsites, huge. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Peter Zijlstra authored
============================================= [ INFO: possible recursive locking detected ] 2.6.18-1.2726.fc6 #1
-
Venkat Yekkirala authored
Fix the selection of an SA for an outgoing packet to be at the same context as the originating socket/flow. This eliminates the SELinux policy's ability to use/sendto SAs with contexts other than the socket's. With this patch applied, the SELinux policy will require one or more of the following for a socket to be able to communicate with/without SAs: 1. To enable a socket to communicate without using labeled-IPSec SAs: allow socket_t unlabeled_t:association { sendto recvfrom } 2. To enable a socket to communicate with labeled-IPSec SAs: allow socket_t self:association { sendto }; allow socket_t peer_sa_t:association { recvfrom }; Signed-off-by:Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by:
James Morris <jmorris@namei.org>
-
Venkat Yekkirala authored
Fix SO_PEERSEC for tcp sockets to return the security context of the peer (as represented by the SA from the peer) as opposed to the SA used by the local/source socket. Signed-off-by:
-
Venkat Yekkirala authored
Since the upstreaming of the mlsxfrm modification a few months back, testing has resulted in the identification of the following issues/bugs that are resolved in this patch set. 1. Fix the security context used in the IKE negotiation to be the context of the socket as opposed to the context of the SPD rule. 2. Fix SO_PEERSEC for tcp sockets to return the security context of the peer as opposed to the source. 3. Fix the selection of an SA for an outgoing packet to be at the same context as the originating socket/flow. The following would be the result of applying this patchset: - SO_PEERSEC will now correctly return the peer's context. - IKE deamons will receive the context of the source socket/flow as opposed to the SPD rule's context so that the negotiated SA will be at the same context as the source socket/flow. - The SELinux policy will require one or more of the following for a socket to be able to communicate with/without SAs: 1. To enable a socket to communicate without using labeled-IPSec SAs: allow socket_t unlabeled_t:association { sendto recvfrom } 2. To enable a socket to communicate with labeled-IPSec SAs: allow socket_t self:association { sendto }; allow socket_t peer_sa_t:association { recvfrom }; This Patch: Pass correct security context to IKE for use in negotiation Fix the security context passed to IKE for use in negotiation to be the context of the socket as opposed to the context of the SPD rule so that the SA carries the label of the originating socket/flow. Signed-off-by: -
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
<= and => don't work well on net-endian... Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Weirdness: the third argument of socket() is net-endian here. Oh, well - it's documented in packet(7). Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
David S. Miller authored
MAX_HEADER does not include the ipv6 header length in it, so we need to add it in explicitly. With help from YOSHIFUJI Hideaki. Signed-off-by:
-
- 02 Dec, 2006 5 commits
-
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (118 commits) [netdrvr] skge: build fix [PATCH] NetXen: driver cleanup, removed unnecessary __iomem type casts [PATCH] PHY: Add support for configuring the PHY connection interface [PATCH] chelesio: transmit locking (plus bug fix). [PATCH] chelsio: statistics improvement [PATCH] chelsio: add MSI support [PATCH] chelsio: use standard CRC routines [PATCH] chelsio: cleanup pm3393 code [PATCH] chelsio: add 1G swcixw aupport [PATCH] chelsio: add support for other 10G boards [PATCH] chelsio: remove unused mutex [PATCH] chelsio: use kzalloc [PATCH] chelsio: whitespace fixes [PATCH] amd8111e use standard CRC lib [PATCH] sky2: msi enhancements. [PATCH] sky2: kfree_skb_any needed [PATCH] sky2: fixes for Yukon EC_U chip revisions [PATCH] sky2: add Dlink 560SX id [PATCH] sky2: receive error handling fix [PATCH] skge: don't clear MC state on link down ...
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/drzeus/mmc: mmc: correct request error handling mmc: Flush block queue when removing card mmc: sdhci high speed support mmc: Support for high speed SD cards mmc: Fix mmc_delay() function mmc: Add support for mmc v4 wide-bus modes [PATCH] mmc: Add support for mmc v4 high speed mode trivial change for mmc/Kconfig: MMC_PXA does not mean only PXA255 Make general code cleanups Add MMC_CAP_{MULTIWRITE,BYTEBLOCK} flags Platform device error handling cleanup Move register definitions away from the header file Change OMAP_MMC_{READ,WRITE} macros to use the host pointer Replace base with virt_base and phys_base mmc: constify mmc_host_ops vectors mmc: remove kernel_thread() -
Linus Torvalds authored
* 'release' of master.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: Revert "ACPI: SCI interrupt source override"
-
Jeff Garzik authored
Signed-off-by:Jeff Garzik <jeff@garzik.org>
-
Len Brown authored
This reverts commit 281ea49b, which broke ACPI Interrupt source overrides that move the SCI from one IRQ in PIC mode to another in IOAPIC mode. If the SCI shared an interrupt line with another device, this would result in a "irq 18: nobody cared" type failure. http://bugzilla.kernel.org/show_bug.cgi?id=7601Signed-off-by:
Len Brown <len.brown@intel.com>
-
