After commit 566c09c5 ("raid5: relieve lock contention in get_active_stripe()")
__find_stripe() is called under conf->hash_locks + hash.
But handle_stripe_clean_event() calls remove_hash() under
conf->device_lock.

Under some cirscumstances the hash chain can be circuited,
and we get an infinite loop with disabled interrupts and locked hash
lock in __find_stripe(). This leads to hard lockup on multiple CPUs
and following system crash.

I was able to reproduce this behavior on raid6 over 6 ssd disks.
The devices_handle_discard_safely option should be set to enable trim
support. The following script was used:

for i in `seq 1 32`; do
    dd if=/dev/zero of=large$i bs=10M count=100 &
done

neilb: original was against a 3.x kernel.  I forward-ported
  to 4.3-rc.  This verison is suitable for any kernel since
  Commit: 59fc630b ("RAID5: batch adjacent full stripe write")
  (v4.1+).  I'll post a version for earlier kernels to stable.
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Fixes: 566c09c5 ("raid5: relieve lock contention in get_active_stripe()")
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: <stable@vger.kernel.org> # 3.13 - 4.2

In Linux 3.9 we introduce a new 'far' layout for RAID10 which was
supposed to rotate the replicas differently and so provide better
resilience.  In particular it could survive more combinations of 2
drive failures.

Unfortunately. due to a coding error, this some did what was wanted,
sometimes improved less than we hoped, and sometimes - in very
unlikely circumstances - put multiple replicas on the same device so
the redundancy was harmed.

No public user-space tool has created arrays using this layout so it
is very unlikely that zero-redundancy arrays actually exist.  Probably
no arrays using any form of the new layout exist.  But we cannot be
certain.

So use another bit in the 'layout' number and introduce a bug-fixed
version of the layout.
Also when assembling an array, if it has a zero-redundancy layout,
give a warning.
Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>

When a write fails and a bad-block-list is present, we can
update the bad-block-list instead of writing the data.  If
this succeeds then it is OK clear the relevant bitmap-bit as
no further 'sync' of the block is needed.

However if writing the bad-block-list fails then we need to
treat the write as failed and particularly must not clear
the bitmap bit.  Otherwise the device can be re-added (after
any hardware connection issues are resolved) and because the
relevant bit in the bitmap is clear, that block will not be
resynced.  This leads to data corruption.

We already delay the final bio_endio() on the write until
the bad-block-list is written so that when the write
returns: either that data is safe, the bad-block record is
safe, or the fact that the device is faulty is safe.
However we *don't* delay the clearing of the bitmap, so the
bitmap bit can be recorded as cleared before we know if the
bad-block-list was written safely.

So: delay that until the write really is safe.
i.e. move the call to close_write() until just before
calling bio_endio(), and recheck the 'is array degraded'
status before making that call.

This bug goes back to v3.1 when bad-block-lists were
introduced, though it only affects arrays created with
mdadm-3.3 or later as only those have bad-block lists.

Backports will require at least
Commit: 95af587e ("md/raid10: ensure device failure recorded before write request returns.")
as well.  I'll send that to 'stable' separately.

Note that of the two tests of R10BIO_WriteError that this
patch adds, the first is certain to fail and the second is
certain to succeed.  However doing it this way makes the
patch more obviously correct.  I will tidy the code up in a
future merge window.
Reported-by: Nate Dailey <nate.dailey@stratus.com>
Fixes: bd870a16 ("md/raid10:  Handle write errors by updating badblock log.")
Signed-off-by: NeilBrown <neilb@suse.com>

When a write fails and a bad-block-list is present, we can
update the bad-block-list instead of writing the data.  If
this succeeds then it is OK clear the relevant bitmap-bit as
no further 'sync' of the block is needed.

However if writing the bad-block-list fails then we need to
treat the write as failed and particularly must not clear
the bitmap bit.  Otherwise the device can be re-added (after
any hardware connection issues are resolved) and because the
relevant bit in the bitmap is clear, that block will not be
resynced.  This leads to data corruption.

We already delay the final bio_endio() on the write until
the bad-block-list is written so that when the write
returns: either that data is safe, the bad-block record is
safe, or the fact that the device is faulty is safe.
However we *don't* delay the clearing of the bitmap, so the
bitmap bit can be recorded as cleared before we know if the
bad-block-list was written safely.

So: delay that until the write really is safe.
i.e. move the call to close_write() until just before
calling bio_endio(), and recheck the 'is array degraded'
status before making that call.

This bug goes back to v3.1 when bad-block-lists were
introduced, though it only affects arrays created with
mdadm-3.3 or later as only those have bad-block lists.

Backports will require at least
Commit: 55ce74d4 ("md/raid1: ensure device failure recorded before write request returns.")
as well.  I'll send that to 'stable' separately.

Note that of the two tests of R1BIO_WriteError that this
patch adds, the first is certain to fail and the second is
certain to succeed.  However doing it this way makes the
patch more obviously correct.  I will tidy the code up in a
future merge window.
Reported-and-tested-by: Nate Dailey <nate.dailey@stratus.com>
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Fixes: cd5ff9a1 ("md/raid1:  Handle write errors by updating badblock log.")
Signed-off-by: NeilBrown <neilb@suse.com>

This was introduced with 9e882242
which changed the return value of submit_bio_wait() to return != 0 on
error, but didn't update the caller accordingly.

Fixes: 9e882242 ("block: Add submit_bio_wait(), remove from md")
Cc: stable@vger.kernel.org (v3.10)
Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>

This was introduced with 9e882242
which changed the return value of submit_bio_wait() to return != 0 on
error, but didn't update the caller accordingly.

Fixes: 9e882242 ("block: Add submit_bio_wait(), remove from md")
Cc: stable@vger.kernel.org (v3.10)
Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>

Pull i2c fixes from Wolfram Sang:
 "Here are some bugfixes for the I2C subsystem.

  Kieran found a flaw in the recently renewed wake irq handling.  Mika
  handled a user bug report where the ACPI info turned out to be
  unusable.  I updated MAINTAINERS so that such bug reports will sooner
  get to the right people.  Geert pointed me to a problem of some i2c
  drivers regarding PM which I fixed"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348
  MAINTAINERS: add maintainers for Synopsis Designware I2C drivers
  i2c: designware-platdrv: enable RuntimePM before registering to the core
  i2c: s3c2410: enable RuntimePM before registering to the core
  i2c: rcar: enable RuntimePM before registering to the core
  i2c: return probe deferred status on dev_pm_domain_attach

ACPI SSCN/FMCN methods were originally added because then the platform can
provide the most accurate HCNT/LCNT values to the driver. However, this
seems not to be true for Dell Inspiron 7348 where using these causes the
touchpad to fail in boot:

  i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
  i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration
  i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
  i2c_designware INT3433:00: controller timed out

The values received from ACPI are (in fast mode):

  HCNT: 72
  LCNT: 160

this translates to following timings (input clock is 100MHz on Broadwell):

  tHIGH: 720 ns (spec min 600 ns)
  tLOW: 1600 ns (spec min 1300 ns)
  Bus period: 2920 ns (assuming 300 ns tf and tr)
  Bus speed: 342.5 kHz

Both tHIGH and tLOW are within the I2C specification.

The calculated values when ACPI parameters are not used are (in fast mode):

  HCNT: 87
  LCNT: 159

which translates to:

  tHIGH: 870 ns (spec min 600 ns)
  tLOW: 1590 ns (spec min 1300 ns)
  Bus period 3060 ns (assuming 300 ns tf and tr)
  Bus speed 326.8 kHz

These values are also within the I2C specification.

Since both ACPI and calculated values meet the I2C specification timing
requirements it is hard to say why the touchpad does not function properly
with the ACPI values except that the bus speed is higher in this case (but
still well below the max 400kHz).

Solve this by adding DMI quirk to the driver that disables using ACPI
parameters on this particulare machine.
Reported-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

Merge branches 'irq-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq/timer fixes from Thomas Gleixner:
 "irq: a fix for the new hierarchical MSI interrupt handling which
  unbreaks PCI=n configurations.

  timers: a fix for the new hrtimer clock offset update mechanism to
  ensure that the boot time offset is respected"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/msi: Do not use pci_msi_[un]mask_irq as default methods

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Increment clock_was_set_seq in timekeeping_init()

Pull input fixes from Dmitry Torokhov:
 "Just two small fixups to ads7846 touchscreen controller driver and
  Cypress touchpad driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cyapa - fix the copy paste error on electrodes_rx value
  Input: ads7846 - correct the value got from SPI

Pull clk fix from Stephen Boyd:
 "Just one revert for Armada XP devices: the conversion to
  of_clk_get_parent_name() wasn't a direct translation, so we
  revert back to of_clk_get() + __clk_get_name().

  We could make of_clk_get_parent_name() more robust, but that
  may have unintended side-effects, so we'll do that in the
  next version"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Partially revert "clk: mvebu: Convert to clk_hw based provider APIs"

Pull device mapper fixes from Mike Snitzer:
 "Two DM target error path cleanup fixes (one for stable in DM thinp and
  one for a v4.3-rc5 thinko in DM snapshot)"

* tag 'dm-4.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: fix missing pool reference count decrement in pool_ctr error path
  dm snapshot persistent: fix missing cleanup in persistent_ctr error path

Pull btrfs fixes from Chris Mason:
 "I have two more bug fixes for btrfs.

  My commit fixes a bug we hit last week at FB, a combination of lots of
  hard links and an admin command to resolve inode numbers.

  Dave is adding checks to make sure balance on current kernels ignores
  filters it doesn't understand.  The penalty for being wrong is just
  doing more work (not crashing etc), but it's a good fix"

* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: fix use after free iterating extrefs
  btrfs: check unsupported filters in balance arguments

Pull Ceph fixes from Sage Weil:
 "Just two small items from Ilya:

  The first patch fixes the RBD readahead to grab full objects.  The
  second fixes the write ops to prevent undue promotion when a cache
  tier is configured on the server side"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: use writefull op for object size writes
  rbd: set max_sectors explicitly

Pull power management and ACPI fixes from Rafael Wysocki:
 "These fix two recent regressions (ACPICA, the generic power domains
  framework) and one crash that may happen on specific hardware
  supported since 4.1 (intel_pstate).

  Specifics:

   - Fix a regression introduced by a recent ACPICA cleanup that
     uncovered a latent bug (Lv Zheng).

   - Fix a recent regression in the generic power domains framework that
     may cause it to violate PM QoS latency constraints in some cases
     (Ulf Hansson).

   - Fix an intel_pstate driver crash on the Knights Landing chips that
     do not update the MPERF counter as often as expected by the driver
     which may result in a divide by 0 (Srinivas Pandruvada)"

* tag 'pm+acpi-4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL)
  ACPICA: Tables: Fix FADT dependency regression
  PM / Domains: Fix validation of latency constraints in genpd governor

Pull drm fixes from Dave Airlie:
 "Nothing too crazy or exciting:

   - two MAINTAINERS entries that I didn't see the point in delaying.
   - one drm mst fix to stop sending uninitialised data to monitors
   - two amdgpu fixes
   - one radeon mst tiling fix
   - one vmwgfx regression fix
   - one virtio warning fix.

  I have found one locking problem that needs a bit of reorg to fix, but
  I'm not sure it's worth putting in -fixes as I don't think we've seen
  it hit in the real world ever, I just found it using the virtio-gpu
  driver when working on it.  I'll possibly send it next week once I've
  time to discuss with Daniel"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/virtio: use %llu format string form atomic64_t
  MAINTAINERS: Add myself as maintainer for the gma500 driver
  MAINTAINERS: add a maintainer for the atmel-hlcdc DRM driver
  drm/amdgpu: Keep the pflip interrupts always enabled v7
  drm/amdgpu: adjust default dispclk (v2)
  drm/dp/mst: make mst i2c transfer code more robust.
  drm/radeon: attach tile property to mst connector
  drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware

Pull powerpc fixes from Michael Ellerman:
 - Re-enable CONFIG_SCSI_DH in our defconfigs
 - Remove unused os_area_db_id_video_mode
 - cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew
 - cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew
 - cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew
 - cxl: Workaround malformed pcie packets on some cards from Philippe
 - cxl: Fix number of allocated pages in SPA from Christophe Lombard
 - Fix checkstop in native_hpte_clear() with lockdep from Cyril
 - Panic on unhandled Machine Check on powernv from Daniel
 - selftests/powerpc: Fix build failure of load_unaligned_zeropad test

* tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix build failure of load_unaligned_zeropad test
  powerpc/powernv: Panic on unhandled Machine Check
  powerpc: Fix checkstop in native_hpte_clear() with lockdep
  cxl: Fix number of allocated pages in SPA
  cxl: Workaround malformed pcie packets on some cards
  cxl: fix leak of ctx->mapping when releasing kernel API contexts
  cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API
  cxl: fix leak of IRQ names in cxl_free_afu_irqs()
  powerpc/ps3: Remove unused os_area_db_id_video_mode
  powerpc/configs: Re-enable CONFIG_SCSI_DH

Merge misc fixes from Andrew Morton:
 "6 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  sh: add copy_user_page() alias for __copy_user()
  lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE
  mm, dax: fix DAX deadlocks
  memcg: convert threshold to bytes
  builddeb: remove debian/files before build
  mm, fs: obey gfp_mapping for add_to_page_cache()

copy_user_page() is needed by DAX.  Without this we get a compile error
for DAX on SH:

  fs/dax.c:280:2: error: implicit declaration of function `copy_user_page' [-Werror=implicit-function-declaration]
    copy_user_page(vto, (void __force *)vfrom, vaddr, to);
      ^

This was done with a random config that happened to include DAX support.

This patch has only been compile tested.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/built-in.o: In function `__bitrev32':
deftree.c:(.text+0x1e799): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7a0): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7b4): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7c1): undefined reference to `byte_rev_table'

Anything which uses bitrevX() has to select BITREVERSE, to grab
lib/bitrev.o.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The following two locking commits in the DAX code:

commit 84317297 ("dax: fix race between simultaneous faults")
commit 46c043ed ("mm: take i_mmap_lock in unmap_mapping_range() for DAX")

introduced a number of deadlocks and other issues which need to be fixed
for the v4.3 kernel.  The list of issues in DAX after these commits
(some newly introduced by the commits, some preexisting) can be found
here:

  https://lkml.org/lkml/2015/9/25/602 (Subject: "Re: [PATCH] dax: fix deadlock in __dax_fault").

This undoes most of the changes introduced by those two commits,
essentially returning us to the DAX locking scheme that was used in
v4.2.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page_counter_memparse() returns pages for the threshold, while
mem_cgroup_usage() returns bytes for memory usage.  Convert the
threshold to bytes.

Fixes: 3e32cb2e ("memcg: rename cgroup_event to mem_cgroup_event").
Signed-off-by: Shaohua Li <shli@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3716001b ("deb-pkg: add source package") added the ability to
create a debian changelog file.  This exposed that previously the
builddeb script hasn't cleared debian/files between builds.

As debian/files keeps accumulating entries, the changes file will end up
growing indefinelty.  With outdated entries in debian/files, builddeb
script will exit with failure.  This regression impacts those who use
"make deb-pkg" target to build kernel into a .deb package and never use
"make mrproper" or other means to clean kernel tree from generated
directories.

To fix the regression, remove debian/files before starting build and in
the generated clean rule.

Fixes: 3716001b ("deb-pkg: add source package")
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Michal Marek <mmarek@suse.cz>
Cc: maximilian attems <maks@stro.at>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6afdb859 ("mm: do not ignore mapping_gfp_mask in page cache
allocation paths") has caught some users of hardcoded GFP_KERNEL used in
the page cache allocation paths.  This, however, wasn't complete and
there were others which went unnoticed.

Dave Chinner has reported the following deadlock for xfs on loop device:
: With the recent merge of the loop device changes, I'm now seeing
: XFS deadlock on my single CPU, 1GB RAM VM running xfs/073.
:
: The deadlocked is as follows:
:
: kloopd1: loop_queue_read_work
:       xfs_file_iter_read
:       lock XFS inode XFS_IOLOCK_SHARED (on image file)
:       page cache read (GFP_KERNEL)
:       radix tree alloc
:       memory reclaim
:       reclaim XFS inodes
:       log force to unpin inodes
:       <wait for log IO completion>
:
: xfs-cil/loop1: <does log force IO work>
:       xlog_cil_push
:       xlog_write
:       <loop issuing log writes>
:               xlog_state_get_iclog_space()
:               <blocks due to all log buffers under write io>
:               <waits for IO completion>
:
: kloopd1: loop_queue_write_work
:       xfs_file_write_iter
:       lock XFS inode XFS_IOLOCK_EXCL (on image file)
:       <wait for inode to be unlocked>
:
: i.e. the kloopd, with it's split read and write work queues, has
: introduced a dependency through memory reclaim. i.e. that writes
: need to be able to progress for reads make progress.
:
: The problem, fundamentally, is that mpage_readpages() does a
: GFP_KERNEL allocation, rather than paying attention to the inode's
: mapping gfp mask, which is set to GFP_NOFS.
:
: The didn't used to happen, because the loop device used to issue
: reads through the splice path and that does:
:
:       error = add_to_page_cache_lru(page, mapping, index,
:                       GFP_KERNEL & mapping_gfp_mask(mapping));

This has changed by commit aa4d8616 ("block: loop: switch to VFS
ITER_BVEC").

This patch changes mpage_readpage{s} to follow gfp mask set for the
mapping.  There are, however, other places which are doing basically the
same.

lustre:ll_dir_filler is doing GFP_KERNEL from the function which
apparently uses GFP_NOFS for other allocations so let's make this
consistent.

cifs:readpages_get_pages is called from cifs_readpages and
__cifs_readpages_from_fscache called from the same path obeys mapping
gfp.

ramfs_nommu_expand_for_mapping is hardcoding GFP_KERNEL as well
regardless it uses mapping_gfp_mask for the page allocation.

ext4_mpage_readpages is the called from the page cache allocation path
same as read_pages and read_cache_pages

As I've noticed in my previous post I cannot say I would be happy about
sprinkling mapping_gfp_mask all over the place and it sounds like we
should drop gfp_mask argument altogether and use it internally in
__add_to_page_cache_locked that would require all the filesystems to use
mapping gfp consistently which I am not sure is the case here.  From a
quick glance it seems that some file system use it all the time while
others are selective.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This covers only the simplest case - an object size sized write, but
it's still useful in tiering setups when EC is used for the base tier
as writefull op can be proxied, saving an object promotion.

Even though updating ceph_osdc_new_request() to allow writefull should
just be a matter of fixing an assert, I didn't do it because its only
user is cephfs.  All other sites were updated.

Reflects ceph.git commit 7bfb7f9025a8ee0d2305f49bf0336d2424da5b5b.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Commit 30e2bc08 ("Revert "block: remove artifical max_hw_sectors
cap"") restored a clamp on max_sectors.  It's now 2560 sectors instead
of 1024, but it's not good enough: we set max_hw_sectors to rbd object
size because we don't want object sized I/Os to be split, and the
default object size is 4M.

So, set max_sectors to max_hw_sectors in rbd at queue init time.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>

timekeeping_init() can set the wall time offset, so we need to
increment the clock_was_set_seq counter. That way hrtimers will pick
up the early offset immediately. Otherwise on a machine which does not
set wall time later in the boot process the hrtimer offset is stale at
0 and wall time timers are going to expire with a delay of 45 years.

Fixes: 868a3e91 "hrtimer: Make offset update smarter"
Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stefan Liebler <stli@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>

* acpica:
  ACPICA: Tables: Fix FADT dependency regression

* pm-domains:
  PM / Domains: Fix validation of latency constraints in genpd governor

* pm-cpufreq:
  cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL)

When we create a generic MSI domain, that MSI_FLAG_USE_DEF_CHIP_OPS
is set, and that any of .mask or .unmask are NULL in the irq_chip
structure, we set them to pci_msi_[un]mask_irq.

This is a bad idea for at least two reasons:
- PCI_MSI might not be selected, kernel fails to build (yes, this is
  legitimate, at least on arm64!)
- This may not be a PCI/MSI domain at all (platform MSI, for example)

Either way, this looks wrong. Move the overriding of mask/unmask to
the PCI counterpart, and panic is any of these two methods is not
set in the core code (they really should be present).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/1444760085-27857-1-git-send-email-marc.zyngier@arm.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The virtgpu driver prints the last_seq variable using the %ld or
%lu format string, which does not work correctly on all architectures
and causes this compiler warning on ARM:

drivers/gpu/drm/virtio/virtgpu_fence.c: In function 'virtio_timeline_value_str':
drivers/gpu/drm/virtio/virtgpu_fence.c:64:22: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'long long int' [-Wformat=]
  snprintf(str, size, "%lu", atomic64_read(&fence->drv->last_seq));
                      ^
drivers/gpu/drm/virtio/virtgpu_debugfs.c: In function 'virtio_gpu_debugfs_irq_info':
drivers/gpu/drm/virtio/virtgpu_debugfs.c:37:16: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'long long int' [-Wformat=]
  seq_printf(m, "fence %ld %lld\n",
                ^

In order to avoid the warnings, this changes the format strings to %llu
and adds a cast to u64, which makes it work the same way everywhere.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Add myself as the maintainer of the atmel-hlcdc DRM driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Just two fixes for amdgpu:
- fix pageflip interrupt issue
- fix display clock handling on certain fiji boards

* 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: Keep the pflip interrupts always enabled v7
  drm/amdgpu: adjust default dispclk (v2)

Pull request of 2015-10-14

* tag 'vmwgfx-fixes-4.3-151014' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware

Pull arm64 fixes from Will Deacon:
 "Here are a few more arm64 fixes for 4.3.  Again, nothing too
  significant, but worth having nonetheless.  The MINSIGSTKSZ update is
  a bit grotty, but the value we currently have is wrong (too small), so
  anybody using that will have issues already.  It has Arnd's ack for
  the asm-generic change.

  Summary:

   - Fix module CFLAGS setting in workaround for erratum #843419
   - Update MINSIGSTKSZ and SIGSTKSZ to match glibc
   - Wire up some new compat syscalls"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: compat: wire up new syscalls
  arm64: Fix MINSIGSTKSZ and SIGSTKSZ
  arm64: errata: use KBUILD_CFLAGS_MODULE for erratum #843419

Pull pinctrl fixes from Linus Walleij:
 "Here are some overdue (what can I say, I was on a short vacation)
  driver fixes for the pin control subsystem:

   - Allwinner sun5i A10s had a faulty mapping

   - Freescale i.MX25 had some bad arithmetics

   - Uniphier PH1-sLD8 missed some input enable settings"

* tag 'pinctrl-v4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: uniphier: fix input enable settings for PH1-sLD8
  pinctrl: imx25: ensure that a pin with id i is at position i in the info array
  pinctrl: sun5i: Fix a10s pwm1 pinctrl mapping

This is a workaround for KNL platform, where in some cases MPERF counter
will not have updated value before next read of MSR_IA32_MPERF. In this
case divide by zero will occur. This change ignores current sample for
busy calculation in this case.

Fixes: b34ef932 (intel_pstate: Knights Landing support)
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull rdma updates from Doug Ledford:
 "We have four batched up patches for the current rc kernel.

  Two of them are small fixes that are obvious.

  One of them is larger than I would like for a late stage rc pull, but
  we found an issue in the namespace lookup code related to RoCE and
  this works around the issue for now (we allow a lookup with a
  namespace to succeed on RoCE since RoCE namespaces aren't implemented
  yet).  This will go away in 4.4 when we put in support for namespaces
  in RoCE devices.

  The last one is large in terms of lines, but is all legal and no
  functional changes.  Cisco needed to update their files to be more
  specific about their license.  They had intended the files to be dual
  licensed as GPL/BSD all along, and specified that in their module
  license tag, but their file headers were not up to par.  They
  contacted all of the contributors to get agreement and then submitted
  a patch to update the license headers in the files.

  Summary:

   - Work around connection namespace lookup bug related to RoCE

   - Change usnic license to Dual GPL/BSD (was intended to be that way
     all along, but wasn't clear, permission from contributors was
     chased down)

   - Fix an issue between NFSoRDMA and mlx5 that could cause an oops

   - Fix leak of sendonly multicast groups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/ipoib: For sendonly join free the multicast group on leave
  IB/cma: Accept connection without a valid netdev on RoCE
  xprtrdma: Don't require LOCAL_DMA_LKEY support for fastreg
  usnic: add missing clauses to BSD license

Pull ext4 Kconfig description fixup from Jan Kara:
 "A small fixup in description of EXT4_USE_FOR_EXT2 config option"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext4: Update EXT4_USE_FOR_EXT2 description