- 07 May, 2005 15 commits
-
-
Bodo Stroesser authored
Only x86 and x86_64 use arch_align_stack(), all other subarches have: #define arch_align_stack(x) (x) So, if this definition is found, UML's own arch_align_stack() should be skipped. Signed-off-by:
Bodo Stroesser <bstroesser@fujitsu-siemens.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Bodo Stroesser authored
tt/mem.c still uses hardcoded TOP for i386 instead of CONFIG_TOP_ADDR provided by subarch's Kconfig_XXXX, which would be right. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Jeff Dike authored
So, there I was, looking at my own code, wondering what the magic setjmp return values did. This patch turns the constants that are used to make requests of the initial thread into meaningful symbols. Signed-off-by:
-
Jeff Dike authored
This eliminates some stuff from arch/um/kernel/Makefile which refers to a file which has long since been deleted. Signed-off-by:
-
Jeff Dike authored
Eliminate the non-inline version of switch_mm, which can't be used, considering the inline version in asm/mmu_context.h Signed-off-by:
-
Bodo Stroesser authored
s390 tt-mode needs to save not only syscall number, but an further register also. Signed-off-by:
-
Bodo Stroesser authored
s390 needs to change some parts of arch/um/kernel/ptrace.c. Thus, the code regarding PEEKUSER and POKEUSER are shifted to arch/um/sys-<subarch>/ptrace.c. Also s390 debug registers need to be updated, when singlestepping is switched on / off. Thus, setting/resetting of singlestepping is centralized in the new function set_singlestep(), which also inserts the macro SUBARCH_SET_SINGLESTEP(mode), if defined. Finally, s390 has the "ieee_instruction_pointer" in its registers, which also is allowed to be read via ptrace( PTRACE_PEEKUSER, getpid(), PT_IEEE_IP, 0); To implement this feature, sys_ptrace inserts the macro SUBARCH_PTRACE_SPECIAL, if defined. Signed-off-by:
-
Jeff Dike authored
Command line handling cleanups - a couple of things made static and an unused declaration removed from header. Signed-off-by:
-
Jeff Dike authored
I accidentally included include/asm-um/elf.h as a real file in a previous patch. This patch eliminates it. Signed-off-by:
-
Jeff Dike authored
Remove the __deprecated from verify_area_skas and verify_area_tt. Since verify_area is itself marked __deprecated, and it is the only caller of these, then they don't need to be marked. Marking them only makes the build noisier. Signed-off-by:
-
Jiri Benc authored
This patch adds a VIDIOC_G_FREQUENCY command to tuner-core.c and sets lowest and highest tunable frequencies in v4l2_tuner structure returned by VIDIOC_G_TUNER command. Signed-off-by:
Jiri Benc <jbenc@suse.cz> Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
Jiri Benc authored
In VIDIOC_S_FREQUENCY command in tuner-core.c, t->freq is set to a new value before calling set_freq(). This is not necessary, as set_freq() sets t->freq itself. Moreover, it causes problems with Philips tuners, as they need to take into consideration difference between previous and new frequency. Signed-off-by:
-
Kumar Gala authored
In separating out support for hardware floating point we missed the fact that both POWER3 and POWER4 have HW FP. Enable CONFIG_PPC_FPU for POWER3 and POWER4 fixes the issue. Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Acked-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
This patch enables CONFIG_RTAS_PROC by default on pSeries. This will preserve /proc/ppc64/rtas/rmo_buffer, which is needed by librtas. Signed-off-by:
John Rose <johnrose@austin.ibm.com> Signed-off-by:
-
Andrew Morton authored
This change from March 3rd causes the partition parsing code to ignore partitions which have a signature byte of zero. Turns out that more people have such partitions than we expected, and their device numbering is coming up wrong in post-2.6.11 kernels. So revert the change while we think about the problem a bit more. Cc: Andries Brouwer <Andries.Brouwer@cwi.nl> Signed-off-by:
-
- 06 May, 2005 14 commits
-
-
Adrian Bunk authored
I somehow missed that there is external usage of rd_size on some architectures. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Noticed by Jakub Jermar <jermar@itbs.cz>
-
James Bottomley authored
There's a slight bug in the routines in that if the period requires dt, then the routine will unconditionally set it. DT may only be set if Wide is also set, so this turns back on the wide bit. For domain validation to work correctly, we need to observe the wide bit absolutely. Acked by: Matthew Wilcox <willy@debian.org> Signed-off-by:James Bottomley <James.Bottomley@SteelEye.com>
-
Jens Axboe authored
Trying software suspend on my workstation makes it crash on resume. The problem is that via82xx marks the chip_init function as _devinit, but calls it on resume as well. Cc: <tiwai@suse.de> Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Paul Mackerras authored
Move the code to set global interrupt queue membership to xics.c, and remove no longer needed extern declarations. Also call it on all cpus (even the boot cpu) to prepare for kexec. Signed-off-by:
Milton Miller <miltonm@bga.com> Signed-off-by:
R Sharada <sharada@in.ibm.com> Signed-off-by:
-
Russell King authored
Signed-off-by:Russell King <rmk@arm.linux.org.uk>
-
Paul Mackerras authored
Trivial patch to remove our last direct reference to contig_page_data. This will make it just that much less hard to seperate NUMA and DISCONTIG. Please forward on. Against 2.6.12-rc1 Signed-off-by:
Joel Schopp <jschopp@austin.ibm.com> Signed-off-by:
-
Paul Mackerras authored
start.c is not referenced in the arch/ppc64/boot/Makefile compile tested with the defconfig. Signed-off-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Paul Mackerras authored
The defines in bootinfo.h are not used, so the include can be removed. According to Ben, birecs are not used on ppc64: on ppc64, we made the decision of enforcing the presence of an OF device-tree and either an OF-like client interface or a kexec like flattened tree. so if your bootloader want to say things to the kernel, it can do so by adding properties to the device-tree compile-tested with defconfig Signed-off-by:
-
Paul Mackerras authored
The code in reloc_offset is actually subtracting the address in the link register from the address calculated by the linker. Perhaps the extended mnemonic `sub' replaced an original `subf' and the comment just did not get updated. bl 1f 1: mflr r3 LOADADDR(r4,1b) sub r3,r4,r3 Signed-off-by:Amos Waterland <apw@us.ibm.com> Signed-off-by:
-
Paul Mackerras authored
The code in unflatten_device_tree knows that get_property is written to only return with lenp equal to 1 when also returning a valid pointer. The gcc 3.3.3 compiler is not able to prove this to itself, so it warns about a possible uninitialized pointer dereference: .../arch/ppc64/kernel/prom.c: In function `unflatten_device_tree': .../arch/ppc64/kernel/prom.c:828: warning: `p' might be used uninitialized in this function Unless it is desired to rework the interaction between the two functions, this will keep the existing behavior but quiet the compiler. Signed-off-by:
-
Tobias Klauser authored
Replace a custom MIN() macro with the min() macro from kernel.h This patch removes 4 lines of redundant code. Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by:
-
- 05 May, 2005 11 commits
-
-
Adrian Bunk authored
The Coverity checker found that this for loop was wrong. This patch changes it to what seems to be intended. Signed-off-by:
-
Adrian Bunk authored
This patch fixes an off by one error found by the Coverity checker. Signed-off-by:
-
walter harms authored
this clarifies the documentation on the behavier of strncpy(). Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
-
Domen Puncer authored
As per http://www.nist.gov/dads/HTML/shellsort.html, this should be referred to as a Shell sort. Shell-Metzner is a misnomer. Signed-off-by:
Daniel Dickman <didickman@yahoo.com> Signed-off-by:
-
Domen Puncer authored
The regression test in lib/sort.c is currently worthless because the array that is generated for sorting will be all zeros. This patch fixes things so that the array that is generated will contain unsorted integers (that are not all identical) as was probably intended. Signed-off-by Daniel Dickman <didickman@yahoo.com> Signed-off-by:
-
Adrian Bunk authored
drivers/scsi/NCR53C9x.c: In function `esp_do_data': drivers/scsi/NCR53C9x.c:1838: warning: unused variable `flags' Signed-off-by:
Adrian Bunk <bunk@fs.tum.de> Signed-off-by:
-
Kianusch Sayah Karadji authored
- Changed Name/defines from "Geode GX" to "Geode GX1" for clarification - Dropped "-march=i586" in favor of "-march=i486" - Dopped X86_OOSTORE support for Geode GX1 Signed-off-by:
Kianusch Sayah Karadji <kianusch@sk-tech.net> Signed-off-by:
-
Jesper Juhl authored
Ross moved. Remove the bad email address so people will find the correct one in ./CREDITS. Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
Domen Puncer authored
When I do a "diff -Nur arch/i386 arch/x86_64" to see what is different between these two architectures, I see some differences due to whitespace issues only. The attached patch removes some of the noise by fixing up the following files: - arch/i386/boot/bootsect.S - arch/i386/boot/video.S - arch/x86_64/boot/bootsect.S Signed-off-by:
-
Domen Puncer authored
Just a few small cleanups to make this coherent english. Signed-Off-By:
Martin Hicks <mort@wildopensource.com> Signed-off-by:
-
Domen Puncer authored
compile warning cleanup - suggested by Adrian Bunk; remove unmaintained rcs char strings from source and handle the occurrences of their use, make sure kernel-userspace issues taken care of; break out into separate patch Signed-off-by:
Stephen Biggs <yrgrknmxpzlk@gawab.com> Signed-off-by:
-
