- 24 Jul, 2017 27 commits
-
-
Guy Levi authored
To enable RSS functionality the IB indirection table object (i.e. ib_rwq_ind_table) should be used. This patch implements the related verbs as of create and destroy an indirection table. In downstream patches the indirection table will be used as part of RSS QP creation. Signed-off-by:
Guy Levi <guyle@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Guy Levi authored
Support create/modify/destroy WQ related verbs. The base IB object to enable RSS functionality is a WQ (i.e. ib_wq). This patch implements the related WQ verbs as of create, modify and destroy. In downstream patches the WQ will be used as part of an indirection table (i.e. ib_rwq_ind_table) to enable RSS QP creation. Notes: ConnectX-3 hardware requires consecutive WQNs list as receive descriptor queues for the RSS QP. Hence, the driver manages consecutive ranges lists per context which the user must respect. Destroying the WQ does not return its WQN back to its range for reusing. However, destroying all WQs from the same range releases the range and in turn releases its WQNs for reusing. Since the WQ object is not a natural object in the hardware, the driver implements the WQ by the hardware QP. As such, the WQ inherits its port from its RSS QP parent upon its RST->INIT transition and by that time its state is applied to the hardware. Signed-off-by:
-
Moshe Shemesh authored
Adding visibility of resource usage of QPs, CQs and counters used by virtual functions. This feature will be used to give the PF administrator more data while debugging VF status. Usage info was added to ALLOC_RES command, to notify the PF if the resource which is being reserved or allocated for the VF will be used by kernel driver or by user verbs. Updated reservation and allocation functions of QP, CQ and counter with additional usage parameter. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
When inline-receive is enabled, the HCA may write received data into the receive WQE. Inline-receive is enabled by setting its matching bit in the QP context and each single-packet message with payload not exceeding the receive WQE size will be delivered to the WQE. The completion report will indicate that the payload was placed to the WQE. It includes: 1) Return maximum supported size of inline-receive by the hardware in query_device vendor's data part. 2) Enable the feature when requested by the vendor data input. Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
-
Parav Pandit authored
This patch adds below requester and responder side error counters, which will be exposed by hardware counters interface and are supported as part of query Q counters command extension. +---------------------------+-------------------------------------+ | Name | Description | |---------------------------+-------------------------------------| |resp_local_length_error | Number of times responder detected | | | local length errors | |---------------------------+-------------------------------------| |resp_cqe_error | Number of CQEs completed with error | | | at responder | |---------------------------+-------------------------------------| |req_cqe_error | Number of CQEs completed with error | | | at requester | |---------------------------+-------------------------------------| |req_remote_invalid_request | Number of times requester detected | | | remote invalid request error | |---------------------------+-------------------------------------| |req_remote_access_error | Number of times requester detected | | | remote access error | |---------------------------+-------------------------------------| |resp_remote_access_error | Number of times responder detected | | | remote access error | |---------------------------+-------------------------------------| |resp_cqe_flush_error | Number of CQEs completed with | | | flushed with error at responder | |---------------------------+-------------------------------------| |req_cqe_flush_error | Number of CQEs completed with | | | flushed with error at requester | +---------------------------+-------------------------------------+ Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
The extended address vector is the highest bit in be32 variable, but it was compared with the lowest. This patch fixes the endianness of that check and removes already declared define. Fixes: 17d2f88f ("IB/mlx5: Add ODP atomics support") Reviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Majd Dibbiny authored
When we have a miss in one order of the mkey cache, we try to get an mkey from a higher order. We still need to check that the higher order can be used with UMR before using it. Otherwise, we will get an mkey with 0 entries and the post send operation that is used to fill it will complete with the following error: mlx5_0:dump_cqe:275:(pid 0): dump error cqe 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0f007806 25000025 49ce59d2 Fixes: 49780d42 ("IB/mlx5: Expose MR cache for mlx5_ib") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Reviewed-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Report RX checksum capabilities when 'ipoib_enhanced_offloads' capabilities are set and support checksum. Signed-off-by:
-
Yishai Hadas authored
Report 'ipoib_enhanced_offloads' capabilities from the core layer, it will be used in the next patch from this series. Signed-off-by:
-
Yishai Hadas authored
In order to add multicast flow steering support, there is need to block the attaching of mcg flow for underlay QP, recognize multicast IB_FLOW_SPEC_IPV4 based on its IP and enable creating/destroying flow for IB layer. Signed-off-by:
-
Yishai Hadas authored
Allow user space applications to accelerate send and receive traffic which is typically handled by IPoIB ULP by creating a UD QP with a given source QPN of the IPoIB UD QP. UD QP with a given source QPN should basically be similar to RAW QP from point of view of its created resources. However, - Its TIS should point to the source QPN. - Modify can be done only on its state as the transport attributes are managed by its source QP. This patch manages below: - Creating/destroying/modifying UD QP with a given source QPN. Signed-off-by:
-
Yishai Hadas authored
Enable QP creation with a given source QP number, the created QP will use the source QPN as its wire QP number. To create such a QP, root privileges (i.e. CAP_NET_RAW) are required from the user application. This comes as a pre-patch for downstream patches in this series to allow user space applications to accelerate traffic which is typically handled by IPoIB ULP. Signed-off-by:
-
Yishai Hadas authored
Enable QP creation with a given source QP number. The created QP will use the source QPN as its wire QP number. This comes as a pre-patch for downstream patches in this series to allow user space applications to accelerate traffic which is typically handled by IPoIB ULP. Signed-off-by:
-
Noa Osherovich authored
When creating address handle from multicast GID, set MAC according to the appropriate formula instead of searching for it in the GID table: - For IPv4 multicast GID use ip_eth_mc_map(). - For IPv6 multicast GID use ipv6_eth_mc_map(). Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Noa Osherovich authored
RoCEv2 Annex states that for RoCEv2 over IPv4, the corresponding IPv4 address is encoded into the GID according to the following rule: GID= :ffff:<IPv4 address> Remove the 0xff0e prefix for RoCEv2 packets with IPv4 and leave it zeroed and change rdma_is_multicast_addr() to consider the new logic. Signed-off-by:
-
Noa Osherovich authored
RoCE Annex (A16.9.10/11) declares that during attach (detach) QP to a multicast group, if the QP is associated with a RoCE port, the multicast group MLID is unused and is ignored. During attach or detach multicast, when the QP is associated with a port, it is enough to check the port's link layer and validate the LID only if it is Infiniband. Otherwise, avoid validating the multicast LID. Fixes: 8561eae6 ("IB/core: For multicast functions, verify that LIDs are multicast LIDs") Signed-off-by:
-
Maor Gottlieb authored
Add debugfs interface for monitor the number of delay drop timeout events and the number of existing dropless RQs in the system. In addition add debugfs interface for configuring the global timeout value which is used in the SET_DELAY_DROP command. Signed-off-by:
-
Maor Gottlieb authored
RQs that were configured for "delay drop" will prevent packet drops when their WQEs are depleted. Marking an RQ to be drop-less is done by setting delay_drop_en in RQ context using CREATE_RQ command. Since this feature is globally activated/deactivated by using the SET_DELAY_DROP command on all the marked RQs, we activated/deactivated it according to the number of RQs with 'delay_drop' enabled. When timeout is expired, then the feature is deactivated. Therefore the driver handles the delay drop timeout event and reactivate it. Signed-off-by:
-
Maor Gottlieb authored
When delay drop timeout is expired, the firmware raises general notification event of DELAY_DROP_TIMEOUT subtype. In addition the feature is disable so the driver have to reactivate the timeout. Signed-off-by:
-
Maor Gottlieb authored
Add support to SET_DELAY_DROP command. This command will be used in downstream patches for delay packet drop. The timeout value should be indicated by delay_drop_timeout field. Packet processing will be delayed till timeout value passed or until more WQEs are posted. Setting this value to 0 disables the feature. Signed-off-by:
-
Maor Gottlieb authored
Work queue which is created with IB_WQ_FLAGS_DELAY_DROP won't cause packet drops when there aren't receive WQEs, but will wait until posting of receive WQEs or for some period of time that the device was configured with. It includes: * Add a new creation flag to enable delay drop functionality in a WQ. * A new capability was introduced - IB_RAW_PACKET_CAP_DELAY_DROP, which is the device's ability to delay packet drops when there aren't receive WQEs. Signed-off-by:
-
Bodong Wang authored
When a user sets port_guid, node_guid or policy of an IB virtual function, save this information in "struct mlx5_vf_context". This information will be restored later when pci_resume is called. To make sure this works, one can use aer-inject to generate PCI errors on mlx5 devices and verify if relevant fields are restored after PCI resume. Signed-off-by:
Bodong Wang <bodong@mellanox.com> Reviewed-by:
-
Parav Pandit authored
This patch adds debug control parameters for congestion control which can be read or written through debugfs. They are for reaction point and notification point nodes. These control parameters are as below: +------------------------------+-----------------------------------------+ | Name | Description | |------------------------------+-----------------------------------------| |rp_clamp_tgt_rate | When set target rate is updated to | | | current rate | |------------------------------+-----------------------------------------| |rp_clamp_tgt_rate_ati | When set update target rate based on | | | timer as well | |------------------------------+-----------------------------------------| |rp_time_reset | time between rate increase if no | | | CNP is received unit in usec | |------------------------------+-----------------------------------------| |rp_byte_reset | Number of bytes between rate inease if | | | no CNP is received | |------------------------------+-----------------------------------------| |rp_threshold | Threshold for reaction point rate | | | control | |------------------------------+-----------------------------------------| |rp_ai_rate | Rate for target rate, unit in Mbps | |------------------------------+-----------------------------------------| |rp_hai_rate | Rate for hyper increase state | | | unit in Mbps | |------------------------------+-----------------------------------------| |rp_min_dec_fac | Minimum factor by which the current | | | transmit rate can be changed when | | | processing a CNP, unit is percerntage | |------------------------------+-----------------------------------------| |rp_min_rate | Minimum value for rate limit, | | | unit in Mbps | |------------------------------+-----------------------------------------| |rp_rate_to_set_on_first_cnp | Rate that is set when first CNP is | | | received, unit is Mbps | |------------------------------+-----------------------------------------| |rp_dce_tcp_g | Used to calculate alpha | |------------------------------+-----------------------------------------| |rp_dce_tcp_rtt | Time between updates of alpha value, | | | unit is usec | |------------------------------+-----------------------------------------| |rp_rate_reduce_monitor_period | Minimum time between consecutive rate | | | reductions | |------------------------------+-----------------------------------------| |rp_initial_alpha_value | Initial value of alpha | |------------------------------+-----------------------------------------| |rp_gd | When CNP is received, flow rate is | | | reduced based on gd, rp_gd is given as | | | log2(rp_gd) | |------------------------------+-----------------------------------------| |np_cnp_dscp | dscp code point for generated cnp | |------------------------------+-----------------------------------------| |np_cnp_prio_mode | 802.1p priority for generated cnp | |------------------------------+-----------------------------------------| |np_cnp_prio | cnp priority mode | +------------------------------+-----------------------------------------+ Signed-off-by:
-
Moni Shoua authored
The old logic ignored link state. This led to missing IB events like when link goes down on the switch while admin state is up or to redundant events like when admin state goes up while link is down. To fix that, probe the port state on NETDEV events and compare to last known state to decide if IB events needs to be dispatched. FIxes: 5ec8c83e ("IB/mlx5: Port events in RoCE now rely on netdev events") Signed-off-by:
-
Huy Nguyen authored
Before running the ethtool's loopback selftest, we need to make sure that the local loopback is enabled. Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
-
Huy Nguyen authored
Currently, unicast/multicast loopback raw ethernet (non-RDMA) packets are sent back to the vport. A unicast loopback packet is the packet with destination MAC address the same as the source MAC address. For multicast, the destination MAC address is in the vport's multicast filter list. Moreover, the local loopback is not needed if there is one or none user space context. After this patch, the raw ethernet unicast and multicast local loopback are disabled by default. When there is more than one user space context, the local loopback is enabled. Note that when local loopback is disabled, raw ethernet packets are not looped back to the vport and are forwarded to the next routing level (eswitch, or multihost switch, or out to the wire depending on the configuration). Signed-off-by:
-
Huy Nguyen authored
Add support for raw ethernet local loopback firmware command. Signed-off-by:
-
- 23 Jul, 2017 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This adds a perl script to actually parse the MAINTAINERS file, clean up some whitespace in it, warn about errors in it, and then properly sort the end result. My perl-fu is atrocious, so the script has basically been created by randomly putting various characters in a pile, mixing them around, and then looking it the end result does anything interesting when used as a perl script. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Prepping for scripting the MAINTAINERS file cleanup (and possible split) showed a couple of cases where the headers for a couple of entries were bogus. There's a few different kinds of bogosities: - the X-GENE SOC EDAC case was confused and split over two lines - there were four entries for "GREYBUS PROTOCOLS DRIVERS" that were all different things. - the NOKIA N900 CAMERA SUPPORT" was duplicated all of which were more obvious when you started doing associative arrays in perl to track these things by the header (so that we can alphabetize this thing properly, and so that we might split it up by the data too). Cc: Joe Perches <joe@perches.com> Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Some fixes and cleanups for running under Xen" * tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: don't online new memory initially xen/x86: fix cpu hotplug xen/grant-table: log the lack of grants xen/x86: Don't BUG on CPU0 offlining
-
Juergen Gross authored
When setting up the Xenstore watch for the memory target size the new watch will fire at once. Don't try to reach the configured target size by onlining new memory in this case, as the current memory size will be smaller in almost all cases due to e.g. BIOS reserved pages. Onlining new memory will lead to more problems e.g. undesired conflicts with NVMe devices meant to be operated as block devices. Instead remember the difference between target size and current size when the watch fires for the first time and apply it to any further size changes, too. In order to avoid races between balloon.c and xen-balloon.c init calls do the xen-balloon.c initialization from balloon.c. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Juergen Gross authored
Commit dc6416f1 ("xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()") introduced an error leading to a stack overflow of the idle task when a cpu was brought offline/online many times: by calling cpu_startup_entry() instead of returning at the end of xen_play_dead() do_idle() would be entered again and again. Don't use cpu_startup_entry(), but cpuhp_online_idle() instead allowing to return from xen_play_dead(). Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by:
-
Wengang Wang authored
log a message when we enter this situation: 1) we already allocated the max number of available grants from hypervisor and 2) we still need more (but the request fails because of 1)). Sometimes the lack of grants causes IO hangs in xen_blkfront devices. Adding this log would help debuging. Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
-
Vitaly Kuznetsov authored
CONFIG_BOOTPARAM_HOTPLUG_CPU0 allows to offline CPU0 but Xen HVM guests BUG() in xen_teardown_timer(). Remove the BUG_ON(), this is probably a leftover from ancient times when CPU0 hotplug was impossible, it works just fine for HVM. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
-
- 22 Jul, 2017 5 commits
-
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Avoid buffer overruns in applesmc driver" * tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (applesmc) Avoid buffer overruns
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing huge at all, a revert of a patch that turned out to break things, a fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition correct, and a few minor serial driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix TIOCGPTPEER ioctl definition tty: hide unused pty_get_peer function tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART serial: imx: Prevent TX buffer PIO write when a DMA has been started Revert "serial: imx-serial - move DMA buffer configuration to DT" serial: sh-sci: Uninitialized variables in sysfs files serial: st-asc: Potential error pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 4.13-rc2. All fix reported problems with 4.13-rc1 or older kernels (like the binder fixes). Full details in the shortlog. All have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: w1: omap-hdq: fix error return code in omap_hdq_probe() regmap: regmap-w1: Fix build troubles w1: Fix slave count on 1-Wire bus (resend) mux: mux-core: unregister mux_class in mux_exit() mux: remove the Kconfig question for the subsystem nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse drivers/fsi: fix fsi_slave_mode prototype fsi: core: register with postcore_initcall thunderbolt: Correct access permissions for active NVM contents vmbus: re-enable channel tasklet spmi: pmic-arb: Always allocate ppid_to_apid table MAINTAINERS: Add entry for SPMI subsystem spmi: Include OF based modalias in device uevent binder: Use wake up hint for synchronous transactions. binder: use group leader instead of open thread Revert "android: binder: Sanity check at binder ioctl"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for 4.13-rc2. The usual batch, gadget fixes for reported issues, as well as xhci fixes, and a small random collection of other fixes for reported issues. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) xhci: fix memleak in xhci_run() usb: xhci: fix spinlock recursion for USB2 test mode xhci: fix 20000ms port resume timeout usb: xhci: Issue stop EP command only when the EP state is running xhci: Bad Ethernet performance plugged in ASM1042A host xhci: Fix NULL pointer dereference when cleaning up streams for removed host usb: renesas_usbhs: gadget: disable all eps when the driver stops usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen() usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd() usb: gadget: f_uac2: endianness fixes. usb: gadget: f_uac1: endianness fixes. include: usb: audio: specify exact endiannes of descriptors usb: gadget: udc: start_udc() can be static usb: dwc2: gadget: On USB RESET reset device address to zero usb: storage: return on error to avoid a null pointer dereference usb: typec: include linux/device.h in ucsi.h USB: cdc-acm: add device-id for quirky printer usb: dwc3: gadget: only unmap requests from DMA if mapped ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for reported issues for 4.13-rc2. Also in here is a new driver, the virtualbox DRM driver. It's stand-alone and got acks from the DRM developers to go in through this tree. It's a new thing, but it should be fine for this point in the rc cycle due to it being independent. All of this has been in linux-next for a while with no reported issues" * tag 'staging-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: add TL-WN722N v2 support staging: speakup: safely register and unregister ldisc staging: speakup: add functions to register and unregister ldisc staging: speakup: safely close tty staging: sm750fb: avoid conflicting vesafb staging: lustre: ko2iblnd: check copy_from_iter/copy_to_iter return code staging: vboxvideo: Add vboxvideo to drivers/staging staging: sm750fb: fixed a assignment typo staging: rtl8188eu: memory leak in rtw_free_cmd_obj() staging: vchiq_arm: fix error codes in probe staging: comedi: ni_mio_common: fix AO timer off-by-one regression
-
