- 07 Oct, 2017 3 commits
-
-
Matthew Auld authored
Enable transparent-huge-pages through gemfs by mounting with huge=within_size. v2: sprinkle within_size comment Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-4-matthew.auld@intel.comSigned-off-by:
-
Matthew Auld authored
Not a fully blown gemfs, just our very own tmpfs kernel mount. Doing so moves us away from the shmemfs shm_mnt, and gives us the much needed flexibility to do things like set our own mount options, namely huge= which should allow us to enable the use of transparent-huge-pages for our shmem backed objects. v2: various improvements suggested by Joonas v3: move gemfs instance to i915.mm and simplify now that we have file_setup_with_mnt v4: fallback to tmpfs shm_mnt upon failure to setup gemfs v5: make tmpfs fallback kinder v5: better gemfs failure message flags variable Signed-off-by: -
Matthew Auld authored
We are planning to use our own tmpfs mnt in i915 in place of the shm_mnt, such that we can control the mount options, in particular huge=, which we require to support huge-gtt-pages. So rather than roll our own version of __shmem_file_setup, it would be preferred if we could just give shmem our mnt, and let it do the rest. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by:
-
- 06 Oct, 2017 19 commits
-
-
Chris Wilson authored
Michel Thierry noticed that we were applying WaDisableCtxRestoreArbitration even to gen9, which does not require the w/a. The rationale is that we need to enable MI arbitration for execlists to work, and to be safe we do that before every batch (in addition to every context switch into the batch). Since this is not clear from the single line comment suggesting the MI_ARB_ENABLE is solely for the w/a, add a little more detail. Signed-off-by:
Michel Thierry <michel.thierry@intel.com>
-
Chris Wilson authored
If two nop's (requests in-flight following a wedged device) complete at the same time, the global_seqno value written to the HWSP is undefined as the two threads are not serialized. v2: Use irqsafe spinlock. We expect the callback may be called from inside another irq spinlock, so we can't unconditionally restore irqs. Fixes: ce1135c7 ("drm/i915: Complete requests in nop_submit_request") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171006115617.18432-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Not all compilers are able to determine that pg is guarded by wait_fuses and so may think that pg is used uninitialized. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Fixes: b2891eb2 ("drm/i915/hsw+: Add has_fuses power well attribute") Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Chris Wilson authored
If a worker requeues itself, it may switch to a different kworker pool, which flush_work() considers as complete. To be strict, we then need to keep flushing the work until it is no longer pending. References: https://bugs.freedesktop.org/show_bug.cgi?id=102456Signed-off-by:
-
Michal Wajdeczko authored
Commit faf65486 ("drm/i915: Unify uC variable types to avoid flooding checkpatch.pl") breaks 32-bit kernel builds. Lets use cast helper to make compiler happy. v2: introduce ptr_to_u64 (Chris) Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171006130844.49012-1-michal.wajdeczko@intel.comReviewed-by:
-
Michal Wajdeczko authored
Fix includes order and make sure we only include required headers. While here, make intel_huc.h header self-contained. Signed-off-by:
-
Joonas Lahtinen authored
With the code motion mostly done, convert all the uC code away from uint??_t at once (only a couple dozen variables), so that reading the checkpatch.pl output should actually pinpoint if a new uint??_t was accidentally introduced. v2: - Include intel_uc_fw.h too (Sagar) Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by:
-
Joonas Lahtinen authored
Lets not introduce BIT() macro requirement for UAPI for now. Fixes: 3fd3a6ff ("drm/i915: Simplify i915_reg_read_ioctl") Signed-off-by:
-
Maarten Lankhorst authored
crtc_state_is_legacy_gamma also checks for CTM, which was missing from intel_color_check. By using the same condition for commit and check we reduce the chance of mismatches. This was spotted by KASAN while trying to rework kms_color igt test. [ 72.008660] ================================================================== [ 72.009326] BUG: KASAN: slab-out-of-bounds in bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915] [ 72.009519] Read of size 2 at addr ffff880220216e50 by task kms_color/1158 [ 72.009900] CPU: 2 PID: 1158 Comm: kms_color Tainted: G U W 4.14.0-rc3-patser+ #5281 [ 72.009921] Hardware name: GIGABYTE GB-BKi3A-7100/MFLP3AP-00, BIOS F1 07/27/2016 [ 72.009941] Call Trace: [ 72.009968] dump_stack+0xc5/0x151 [ 72.009996] ? _atomic_dec_and_lock+0x10f/0x10f [ 72.010024] ? show_regs_print_info+0x3c/0x3c [ 72.010072] print_address_description+0x7f/0x240 [ 72.010108] kasan_report+0x216/0x370 [ 72.010308] ? bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915] [ 72.010349] __asan_load2+0x74/0x80 [ 72.010552] bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915] [ 72.010772] broadwell_load_luts+0x1f0/0x300 [i915] [ 72.010997] intel_color_load_luts+0x36/0x40 [i915] [ 72.011205] intel_begin_crtc_commit+0xa1/0x310 [i915] [ 72.011283] drm_atomic_helper_commit_planes_on_crtc+0xa6/0x320 [drm_kms_helper] [ 72.011316] ? wait_for_completion_io+0x460/0x460 [ 72.011524] intel_update_crtc+0xe3/0x100 [i915] [ 72.011720] skl_update_crtcs+0x360/0x3f0 [i915] [ 72.011945] ? intel_update_crtcs+0xf0/0xf0 [i915] [ 72.012010] ? drm_atomic_helper_wait_for_dependencies+0x3d9/0x400 [drm_kms_helper] [ 72.012231] intel_atomic_commit_tail+0x8db/0x1500 [i915] [ 72.012273] ? __lock_is_held+0x9c/0xc0 [ 72.012494] ? skl_update_crtcs+0x3f0/0x3f0 [i915] [ 72.012518] ? find_next_bit+0xb/0x10 [ 72.012544] ? cpumask_next+0x1a/0x20 [ 72.012745] ? i915_sw_fence_complete+0x9d/0xe0 [i915] [ 72.012938] ? __i915_sw_fence_complete+0x5d0/0x5d0 [i915] [ 72.013176] intel_atomic_commit+0x528/0x570 [i915] [ 72.013280] ? drm_atomic_get_property+0xc00/0xc00 [drm] [ 72.013466] ? intel_atomic_commit_tail+0x1500/0x1500 [i915] [ 72.013496] ? kmem_cache_alloc_trace+0x266/0x280 [ 72.013714] ? intel_atomic_commit_tail+0x1500/0x1500 [i915] [ 72.013812] drm_atomic_commit+0x77/0x80 [drm] [ 72.013911] set_property_atomic+0x14a/0x210 [drm] [ 72.014015] ? drm_object_property_get_value+0x70/0x70 [drm] [ 72.014080] ? mutex_unlock+0xd/0x10 [ 72.014292] ? intel_atomic_commit_tail+0x1500/0x1500 [i915] [ 72.014379] drm_mode_obj_set_property_ioctl+0x1cf/0x310 [drm] [ 72.014481] ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm] [ 72.014510] ? lock_release+0x6c0/0x6c0 [ 72.014602] ? drm_is_current_master+0x46/0x60 [drm] [ 72.014706] drm_ioctl_kernel+0x148/0x1d0 [drm] [ 72.014799] ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm] [ 72.014898] ? drm_ioctl_permit+0x100/0x100 [drm] [ 72.014936] ? kasan_check_write+0x14/0x20 [ 72.015039] drm_ioctl+0x441/0x660 [drm] [ 72.015129] ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm] [ 72.015235] ? drm_getstats+0x20/0x20 [drm] [ 72.015287] ? ___might_sleep+0x159/0x340 [ 72.015311] ? find_held_lock+0xcf/0xf0 [ 72.015341] ? __schedule_bug+0x110/0x110 [ 72.015405] do_vfs_ioctl+0xa88/0xb10 [ 72.015449] ? ioctl_preallocate+0x1a0/0x1a0 [ 72.015487] ? selinux_capable+0x20/0x20 [ 72.015525] ? rcu_dynticks_momentary_idle+0x40/0x40 [ 72.015607] SyS_ioctl+0x4e/0x80 [ 72.015647] entry_SYSCALL_64_fastpath+0x18/0xad [ 72.015670] RIP: 0033:0x7ff74a3d04d7 [ 72.015691] RSP: 002b:00007ffc594bec08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 72.015734] RAX: ffffffffffffffda RBX: ffffffff8718f54a RCX: 00007ff74a3d04d7 [ 72.015756] RDX: 00007ffc594bec40 RSI: 00000000c01864ba RDI: 0000000000000003 [ 72.015777] RBP: ffff880211c0ff98 R08: 0000000000000086 R09: 0000000000000000 [ 72.015799] R10: 00007ff74a691b58 R11: 0000000000000246 R12: 0000000000000355 [ 72.015821] R13: 00000000ff00eb00 R14: 0000000000000a00 R15: 00007ff746082000 [ 72.015857] ? trace_hardirqs_off_caller+0xfa/0x110 Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171005141520.23990-1-maarten.lankhorst@linux.intel.com [mlankhorst: s/crtc_state_is_legacy/&_gamma/ (danvet)] Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 82cf435b ("drm/i915: Implement color management on bdw/skl/bxt/kbl") Cc: <stable@vger.kernel.org> # v4.7+
-
Jani Nikula authored
Only assign the hooks once instead of overwriting for DDI. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/796b631d018fdd5aa2a3608c6a9b9fa196a50f76.1507200657.git.jani.nikula@intel.com
-
Jani Nikula authored
Reduce encoder specific checks from CRTC code. Reviewed-by:
-
Jani Nikula authored
Simplify CRTC enable. v2: Don't forget DSI (Daniel) Reviewed-by:
-
Jani Nikula authored
CRT being the only PCH encoder, we can simplify the crtc disable by pushing the PCH encoder specific parts to CRT encoder. v2: add hsw_disable_crt (Daniel), rebase Reviewed-by:
-
Jani Nikula authored
CRT being the only PCH encoder, we can simplify the crtc enable by pushing the PCH encoder specific parts to CRT encoder. v2: add separate hsw_enable_crt (Daniel), rebase Reviewed-by:
-
Michal Wajdeczko authored
Unify initialization of the uC firmware helper as we want to maximize code reuse. Signed-off-by:
-
Michal Wajdeczko authored
Fix includes order and make sure we only include required headers. Suggested-by:
-
Michal Wajdeczko authored
Move GuC core definitions into dedicated files as we want to keep GuC specific code in separated files. v2: move all functions in single patch (Joonas) fix old checkpatch issues (Sagar) v3: rebased Signed-off-by: -
Michal Wajdeczko authored
Move GuC submission declarations into dedicated header as we want to keep uC specific code in separate files. v2: fix include (Chris) update commit message (Joonas) Signed-off-by: -
Michal Wajdeczko authored
Move GuC log declarations into dedicated header as we want to keep component specific code in separate files. v2: fix includes (Chris) update commit message (Joonas) Suggested-by:
-
- 05 Oct, 2017 7 commits
-
-
Oscar Mateo authored
BSpec indicates exactly 16752 DWORDs (17 pages), plus one page for PPHWSP. Please notice that, when looking at the BSpec context image table, the right filter has to be applied (e.g. "CNL") as some rows are excluded for specific GENs. BSpec: 1383 v2: Update count and add BSpec tag (Joonas) v3: Warning about filters in the commit message (Joonas) Suggested-by:
Oscar Mateo <oscar.mateo@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
-
Arnd Bergmann authored
One of the recent changes introduced a warning about undefined behavior in the sanity checking: drivers/gpu/drm/i915/intel_ddi.c: In function 'intel_ddi_hdmi_level': drivers/gpu/drm/i915/intel_ddi.c:654:6: error: 'n_hdmi_entries' may be used uninitialized in this function [-Werror=maybe-uninitialized] It seems that the new cnl specific get_buf_trans functions can return uninitialized data if the voltage level is set to an unexpected value. This changes the code to always return '1' in that error case, which seems like the safest choice as we use one less than the number as an array index later on. Fixes: cc9cabfd ("drm/i915/cnl: Move voltage check into ddi buf trans functions.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> [danvet: shut up gcc comment added.] Signed-off-by:
-
Arnd Bergmann authored
An earlier bugfix tried to work around this build failure: drivers/gpu/drm/i915/selftests/mock_gem_device.c: In function 'mock_gem_device': drivers/gpu/drm/i915/selftests/mock_gem_device.c:151:20: error: 'struct dev_archdata' has no member named 'iommu' Checking for CONFIG_IOMMU_API is not sufficient as a compile-time test since that may be enabled in configurations that have neither INTEL_IOMMU not AMD_IOMMU enabled. This changes the check to INTEL_IOMMU instead, as this is the only case we actually care about. Fixes: f46f156e ("drm/i915/selftests: Only touch archdata.iommu when it exists") Signed-off-by:
-
Chris Wilson authored
For the fake device we have our own set of mock contexts that need to match the real contexts we normally create. Currently this requires us to manually instantiate them for the selftests, which I forgot. Reported-by:
Matthew Auld <matthew.william.auld@gmail.com> Fixes: e7af3116 ("drm/i915: Introduce a preempt context") Signed-off-by:
-
Manasi Navare authored
For this specific PCI device, the eDP panel requires a higher panel power cycle delay of 1300ms where the minimum spec requirement of panel power cycle delay is 500ms. This fix in combination with correct timestamp at which we get the panel power off time fixes the dP AUX CH timeouts seen on various IGT tests. Fixes: c99a259b ("drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518 Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Acked-by:
-
Manasi Navare authored
Kernel stores the time in jiffies at which the eDP panel is turned off. This should be obtained after the panel is off (after the wait_panel_off). When we next attempt to turn the panel on, we use the difference between the timestamp at which we want to turn the panel on and timestamp at which panel was turned off to ensure that this is equal to panel power cycle delay and if not we wait for the remaining time. Not waiting for the panel power cycle delay can cause the panel to not turn on giving rise to AUX timeouts for the attempted AUX transactions. v2: * Separate lines for bugzilla (Jani Nikula) * Suggested by tag (Daniel Vetter) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144Suggested-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me. $ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --auto v2: Modify and document the dpms and port disable order (Ville) Add comment explaining is_mst = !crtc_state equivalence(Ville, Maarten) v3 by Jani: rebase References: https://bugs.freedesktop.org/show_bug.cgi?id=90963 References: https://bugs.freedesktop.org/show_bug.cgi?id=88124 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude <lyude@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:Lyude Paul <lyude@redhat.com> Acked-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
- 04 Oct, 2017 11 commits
-
-
Chris Wilson authored
Use a priority stored in the context as the initial value when submitting a request. This allows us to change the default priority on a per-context basis, allowing different contexts to be favoured with GPU time at the expense of lower importance work. The user can adjust the context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive values being higher priority (they will be serviced earlier, after their dependencies have been resolved). Any prerequisite work for an execbuf will have its priority raised to match the new request as required. Normal users can specify any value in the range of -1023 to 0 [default], i.e. they can reduce the priority of their workloads (and temporarily boost it back to normal if so desired). Privileged users can specify any value in the range of -1023 to 1023, [default is 0], i.e. they can raise their priority above all overs and so potentially starve the system. Note that the existing schedulers are not fair, nor load balancing, the execution is strictly by priority on a first-come, first-served basis, and the driver may choose to boost some requests above the range available to users. This priority was originally based around nice(2), but evolved to allow clients to adjust their priority within a small range, and allow for a privileged high priority range. For example, this can be used to implement EGL_IMG_context_priority https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of the context to be created. This attribute is a hint, as an implementation may not support multiple contexts at some priority levels and system policy may limit access to high priority contexts to appropriate system privilege level. The default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is EGL_CONTEXT_PRIORITY_MEDIUM_IMG." so we can map PRIORITY_HIGH -> 1023 [privileged, will failback to 0] PRIORITY_MED -> 0 [default] PRIORITY_LOW -> -1023 They also map onto the priorities used by VkQueue (and a VkQueue is essentially a timeline, our i915_gem_context under full-ppgtt). v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/ v3: Report min/max user priorities as defines in the uapi, and rebase internal priorities on the exposed values. Testcase: igt/gem_exec_schedule Signed-off-by:
-
Chris Wilson authored
When we write to ELSP, it triggers a context preemption at the earliest arbitration point (3DPRIMITIVE, some PIPECONTROLs, a few other operations and the explicit MI_ARB_CHECK). If this is to the same context, it triggers a LITE_RESTORE where the RING_TAIL is merely updated (used currently to chain requests from the same context together, avoiding bubbles). However, if it is to a different context, a full context-switch is performed and it will start to execute the new context saving the image of the old for later execution. Previously we avoided preemption by only submitting a new context when the old was idle. But now we wish embrace it, and if the new request has a higher priority than the currently executing request, we write to the ELSP regardless, thus triggering preemption, but we tell the GPU to switch to our special preemption context (not the target). In the context-switch interrupt handler, we know that the previous contexts have finished execution and so can unwind all the incomplete requests and compute the new highest priority request to execute. It would be feasible to avoid the switch-to-idle intermediate by programming the ELSP with the target context. The difficulty is in tracking which request that should be whilst maintaining the dependency change, the error comes in with coalesced requests. As we only track the most recent request and its priority, we may run into the issue of being tricked in preempting a high priority request that was followed by a low priority request from the same context (e.g. for PI); worse still that earlier request may be our own dependency and the order then broken by preemption. By injecting the switch-to-idle and then recomputing the priority queue, we avoid the issue with tracking in-flight coalesced requests. Having tried the preempt-to-busy approach, and failed to find a way around the coalesced priority issue, Michal's original proposal to inject an idle context (based on handling GuC preemption) succeeds. The current heuristic for deciding when to preempt are only if the new request is of higher priority, and has the privileged priority of greater than 0. Note that the scheduler remains unfair! v2: Disable for gen8 (bdw/bsw) as we need additional w/a for GPGPU. Since, the feature is now conditional and not always available when we have a scheduler, make it known via the HAS_SCHEDULER GETPARAM (now a capability mask). v3: Stylistic tweaks. v4: Appease Joonas with a snippet of kerneldoc, only to fuel to fire of the preempt vs preempting debate. Suggested-by:
Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
-
Chris Wilson authored
In the next few patches, we wish to enable different features for the scheduler, some which may subtlety change ABI (e.g. allow requests to be reordered under different circumstances). So we need to make sure userspace is cognizant of the changes (if they care), by which we employ the usual method of a GETPARAM. We already have an I915_PARAM_HAS_SCHEDULER (which notes the existing ability to reorder requests to avoid bubbles), and now we wish to extend that to be a bitmask to describe the different capabilities implemented. Signed-off-by:
-
Chris Wilson authored
With preemption, we will want to "unsubmit" a request, taking it back from the hw and returning it to the priority sorted execution list. In order to know where to insert it into that list, we need to remember its adjust priority (which may change even as it was being executed). This also affects reset for execlists as we are now unsubmitting the requests following the reset (rather than directly writing the ELSP for the inflight contexts). This turns reset into an accidental preemption point, as after the reset we may choose a different pair of contexts to submit to hw. GuC is not updated as this series doesn't add preemption to the GuC submission, and so it can keep benefiting from the early pruning of the DFS inside execlists_schedule() for a little longer. We also need to find a way of reducing the cost of that DFS... v2: Include priority in error-state Signed-off-by:
-
Chris Wilson authored
Move the re-enabling of MI arbitration from a per-bb w/a buffer to the emission of the batch buffer itself. Signed-off-by:
-
Chris Wilson authored
Add another perma-pinned context for using for preemption at any time. We cannot just reuse the existing kernel context, as first and foremost we need to ensure that we can preempt the kernel context itself, so require a distinct context id. Similar to the kernel context, we may want to interrupt execution and switch to the preempt context at any time, and so it needs to be permanently pinned and available. To compensate for yet another permanent allocation, we shrink the existing context and the new context by reducing their ringbuffer to the minimum. v2: Assert that we never allocate a request from the preemption context. v3: Limit perma-pin to engines that may preempt. v4: Onion cleanup for early driver death v5: Onion ordering in main driver cleanup as well. Signed-off-by:
-
Chris Wilson authored
Let the listener know that the context we just scheduled out was not complete, and will be scheduled back in at a later point. v2: Handle CONTEXT_STATUS_PREEMPTED in gvt by aliasing it to CONTEXT_STATUS_OUT for the moment, gvt can expand upon the difference later. Signed-off-by:
-
Michał Winiarski authored
Supporting fine-granularity preemption levels may require changes in userspace batch buffer programming. Therefore, we need to fallback to safe default values, rather that use hardware defaults. Userspace is still able to enable fine-granularity, since we're whitelisting the register controlling it in WaEnablePreemptionGranularityControlByUMD. v2: Extend w/a to cover Cannonlake v3: Fix commentary to include both fake w/a names. Signed-off-by:
-
Jeff McGee authored
The WA applies to all production Gen9 and requires both enabling and whitelisting of the per-context preemption control register. v2: Extend to Cannonlake. Signed-off-by:
Jeff McGee <jeff.mcgee@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
We don't want to make aggregate uc functions to be too detailed. This will also make future patch easier. Signed-off-by:
-
Michal Wajdeczko authored
We want to keep each uC specific code in separate files. Signed-off-by:
-
