- 17 May, 2011 3 commits
-
-
Anton Blanchard authored
recvmmsg fails on a raw socket with EINVAL. The reason for this is packet_recvmsg checks the incoming flags: err = -EINVAL; if (flags & ~(MSG_PEEK|MSG_DONTWAIT|MSG_TRUNC|MSG_CMSG_COMPAT|MSG_ERRQUEUE)) goto out; This patch strips out MSG_WAITFORONE when calling recvmmsg which fixes the issue. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@kernel.org [2.6.34+] Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
Eric Dumazet authored
Using plain hlist_del() in dev_change_name() is wrong since a concurrent reader can crash trying to dereference LIST_POISON1. Bug introduced in commit 72c9528b (net: Introduce dev_get_by_name_rcu()) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 May, 2011 5 commits
-
-
Michał Mirosław authored
Those reduced to DEBUG can possibly be triggered by unprivileged processes and are nothing exceptional. Illegal checksum combinations can only be caused by driver bug, so promote those messages to WARN. Since GSO without SG will now only cause DEBUG message from netdev_fix_features(), remove the workaround from register_netdevice(). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Jarosch authored
During initialization of vmxnet3, the state of LRO gets out of sync with netdev->features. This leads to very poor TCP performance in a IP forwarding setup and is hitting many VMware users. Simplified call sequence: 1. vmxnet3_declare_features() initializes "adapter->lro" to true. 2. The kernel automatically disables LRO if IP forwarding is enabled, so vmxnet3_set_flags() gets called. This also updates netdev->features. 3. Now vmxnet3_setup_driver_shared() is called. "adapter->lro" is still set to true and LRO gets enabled again, even though netdev->features shows it's disabled. Fix it by updating "adapter->lro", too. The private vmxnet3 adapter flags are scheduled for removal in net-next, see commit a0d2730c "net: vmxnet3: convert to hw_features". Patch applies to 2.6.37 / 2.6.38 and 2.6.39-rc6. Please CC: comments. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Commit 747df225 ('sfc: Always map MCDI shared memory as uncacheable') introduced a separate mapping for the MCDI shared memory (MC_TREG_SMEM). This means we can no longer easily include it in the register dump. Since it is not particularly useful in debugging, substitute a recognisable dummy value. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Some Cisco phones do not place the Content-Length field at the end of the SIP message. This is valid, due to a misunderstanding of the specification the parser expects the SDP body to start directly after the Content-Length field. Fix the parser to scan for \r\n\r\n to locate the beginning of the SDP body. Reported-by: Teresa Kang <teresa_kang@gemtek.com.tw> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Patrick McHardy authored
Verify that the message length of a single SIP message, which is calculated based on the Content-Length field contained in the SIP message, does not exceed the packet boundaries. Signed-off-by: Patrick McHardy <kaber@trash.net>
-
- 15 May, 2011 3 commits
-
-
-
Hans Schillstrom authored
Without this patch every access to ip_vs in procfs will increase the netns count i.e. an unbalanced get_net()/put_net(). (ipvsadm commands also use procfs.) The result is you can't exit a netns if reading ip_vs_* procfs entries. Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Stephen Hemminger authored
The commit 6b1e960f bridge: Reset IPCB when entering IP stack on NF_FORWARD broke forwarding of IPV6 packets in bridge because it would call bp_parse_ip_options with an IPV6 packet. Reported-by: Noah Meyerhans <noahm@debian.org> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 13 May, 2011 2 commits
-
-
Stephen Hemminger authored
The commit 6b1e960f bridge: Reset IPCB when entering IP stack on NF_FORWARD broke forwarding of IPV6 packets in bridge because it would call bp_parse_ip_options with an IPV6 packet. Reported-by: Noah Meyerhans <noahm@debian.org> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vitalii Demianets authored
With some combinations of arch/compiler (e.g. arm-linux-gcc) the sizeof operator on structure returns value greater than expected. In cases when the structure is used for mapping PDU fields it may lead to unexpected results (such as holes and alignment problems in skb data). __packed prevents this undesired behavior. Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 May, 2011 7 commits
-
-
Steinar H. Gunderson authored
Since commit e9df2e8f (Use appropriate sock tclass setting for routing lookup) we lost ability to properly add ECN codemarks to ipv6 TCP frames. It seems like TCP_ECN_send() calls INET_ECN_xmit(), which only sets the ECN bit in the IPv4 ToS field (inet_sk(sk)->tos), but after the patch, what's checked is inet6_sk(sk)->tclass, which is a completely different field. Close bug https://bugzilla.kernel.org/show_bug.cgi?id=34322 [Eric Dumazet] : added the INET_ECN_dontxmit() fix and replace macros by inline functions for clarity. Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Changeset dcd39c90 ("ne-h8300: convert to net_device_ops") broke ne-h8300 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in ne-h8300.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa8 ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Changeset 5618f0d1 ("hydra: convert to net_device_ops") broke hydra by adding 8390.o to the link. That meant that lib8390.c was included twice, once in hydra.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa8 ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Changeset b6114794 ("zorro8390: convert to net_device_ops") broke zorro8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in zorro8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa8 ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa ("mac8390: fix build with NET_POLL_CONTROLLER"). Reported-by: Christian T. Steigies <cts@debian.org> Suggested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Christian T. Steigies <cts@debian.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
Ben Hutchings authored
We enabled write-combining for memory-mapped registers in commit 65f0b417, but inhibited it for the MCDI shared memory where this is not supported. However, write-combining mappings also allow read-reordering, which may also be a problem. I found that when an SFC9000-family controller is connected to an Intel 3000 chipset, and write-combining is enabled, the controller stops responding to PCIe read requests during driver initialisation while the driver is polling for completion of an MCDI command. This results in an NMI and system hang. Adding read memory barriers between all reads to the shared memory area appears to reduce but not eliminate the probability of this. We have not yet established whether this is a bug in our BIU or in the PCIe bridge. For now, work around by mapping the shared memory area separately. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
-
Anton Blanchard authored
The ehea driver oopses during memory hotplug if the ports are not up. A simple testcase: # ifconfig ethX down # echo offline > /sys/devices/system/memory/memory32/state Oops: Kernel access of bad area, sig: 11 [#1] last sysfs file: /sys/devices/system/memory/memory32/state REGS: c000000709393110 TRAP: 0300 Not tainted (2.6.39-rc2-01385-g7ef73bca-dirty) DAR: 0000000000000000, DSISR: 40000000 ... NIP [c000000000067c98] .__wake_up_common+0x48/0xf0 LR [c00000000006d034] .__wake_up+0x54/0x90 Call Trace: [c00000000006d034] .__wake_up+0x54/0x90 [d000000006bb6270] .ehea_rereg_mrs+0x140/0x730 [ehea] [d000000006bb69c4] .ehea_mem_notifier+0x164/0x170 [ehea] [c0000000006fc8a8] .notifier_call_chain+0x78/0xf0 [c0000000000b3d70] .__blocking_notifier_call_chain+0x70/0xb0 [c000000000458d78] .memory_notify+0x28/0x40 [c0000000001871d8] .remove_memory+0x208/0x6d0 [c000000000458264] .memory_section_action+0x94/0x140 [c0000000004583ec] .memory_block_change_state+0xdc/0x1d0 [c0000000004585cc] .store_mem_state+0xec/0x160 [c00000000044768c] .sysdev_store+0x3c/0x50 [c00000000020b48c] .sysfs_write_file+0xec/0x1f0 [c00000000018f86c] .vfs_write+0xec/0x1e0 [c00000000018fa88] .SyS_write+0x58/0xd0 To fix this, initialise the waitqueues during port probe instead of port open. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@kernel.org Acked-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 May, 2011 1 commit
-
- 10 May, 2011 19 commits
-
-
-
Oliver Hartkopp authored
TTY layer expects 0 if the ldisc->open operation succeeded. Reported-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Williams authored
Like other mobile broadband device ethernet interfaces, mark the LG VL600 with the 'wwan' devtype so userspace knows it needs additional configuration via the AT port before the interface can be used. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
Unlike the standard case, disabled anti replay detection needs some nontrivial extra treatment on ESN. RFC 4303 states: Note: If a receiver chooses to not enable anti-replay for an SA, then the receiver SHOULD NOT negotiate ESN in an SA management protocol. Use of ESN creates a need for the receiver to manage the anti-replay window (in order to determine the correct value for the high-order bits of the ESN, which are employed in the ICV computation), which is generally contrary to the notion of disabling anti-replay for an SA. So return an error if an ESN state with disabled anti replay detection is inserted for now and add the extra treatment later if we need it. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
As it is, we assign the outer modes output function to the dst entry when we create the xfrm bundle. This leads to two problems on interfamily scenarios. We might insert ipv4 packets into ip6_fragment when called from xfrm6_output. The system crashes if we try to fragment an ipv4 packet with ip6_fragment. This issue was introduced with git commit ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed). The second issue is, that we might insert ipv4 packets in netfilter6 and vice versa on interfamily scenarios. With this patch we assign the inner mode output function to the dst entry when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner mode is used and the right fragmentation and netfilter functions are called. We switch then to outer mode with the output_finish functions. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit 44345724 (factorize sync-rcu call in unregister_netdevice_many) mistakenly removed one test from dev_close() Following actions trigger a BUG : modprobe bonding modprobe dummy ifconfig bond0 up ifenslave bond0 dummy0 rmmod dummy dev_close() must not close a non IFF_UP device. With help from Frank Blaschka and Einar EL Lueck Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Reported-by: Einar EL Lueck <ELELUECK@de.ibm.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
ip link add link eth2 eth2.103 type vlan id 103 gvrp on loose_binding on ip link set eth2.103 up rmmod tg3 # driver providing eth2 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp] PGD 11d251067 PUD 11b9e0067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/net/eth2.104/ifindex CPU 0 Modules linked in: tg3(-) 8021q garp nfsd lockd auth_rpcgss sunrpc libphy sg [last unloaded: x_tables] Pid: 11494, comm: rmmod Tainted: G W 2.6.39-rc6-00261-gfd71257-dirty #580 HP ProLiant BL460c G6 RIP: 0010:[<ffffffffa0030c9e>] [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp] RSP: 0018:ffff88007a19bae8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88011b5e2000 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000175 RDI: ffffffffa0030d5b RBP: ffff88007a19bb18 R08: 0000000000000001 R09: ffff88011bd64a00 R10: ffff88011d34ec00 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88007a19bc48 R14: ffff88007a19bb88 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88011fc00000(0063) knlGS:00000000f77d76c0 CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000011a675000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 11494, threadinfo ffff88007a19a000, task ffff8800798595c0) Stack: ffff88007a19bb36 ffff88011c84b800 ffff88011b5e2000 ffff88007a19bc48 ffff88007a19bb88 0000000000000006 ffff88007a19bb38 ffffffffa003a5f6 ffff88007a19bb38 670088007a19bba8 ffff88007a19bb58 ffffffffa00397e7 Call Trace: [<ffffffffa003a5f6>] vlan_gvrp_request_leave+0x46/0x50 [8021q] [<ffffffffa00397e7>] vlan_dev_stop+0xb7/0xc0 [8021q] [<ffffffff8137e427>] __dev_close_many+0x87/0xe0 [<ffffffff8137e507>] dev_close_many+0x87/0x110 [<ffffffff8137e630>] rollback_registered_many+0xa0/0x240 [<ffffffff8137e7e9>] unregister_netdevice_many+0x19/0x60 [<ffffffffa00389eb>] vlan_device_event+0x53b/0x550 [8021q] [<ffffffff8143f448>] ? ip6mr_device_event+0xa8/0xd0 [<ffffffff81479d03>] notifier_call_chain+0x53/0x80 [<ffffffff81062539>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81062551>] raw_notifier_call_chain+0x11/0x20 [<ffffffff8137df82>] call_netdevice_notifiers+0x32/0x60 [<ffffffff8137e69f>] rollback_registered_many+0x10f/0x240 [<ffffffff8137e85f>] rollback_registered+0x2f/0x40 [<ffffffff8137e8c8>] unregister_netdevice_queue+0x58/0x90 [<ffffffff8137e9eb>] unregister_netdev+0x1b/0x30 [<ffffffffa005d73f>] tg3_remove_one+0x6f/0x10b [tg3] We should call vlan_gvrp_request_leave() from unregister_vlan_dev(), not from vlan_dev_stop(), because vlan_gvrp_uninit_applicant() is called right after unregister_netdevice_queue(). In batch mode, unregister_netdevice_queue() doesn’t immediately call vlan_dev_stop(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Fox authored
We occasionally see list corruption using libertas. While we haven't been able to diagnose this precisely, we have spotted a possible cause: cmdpendingq is generally modified with driver_lock held. However, there are a couple of points where this is not the case. Fix up those operations to execute under the lock, it seems like the correct thing to do and will hopefully improve the situation. Signed-off-by: Paul Fox <pgf@laptop.org> Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
We should not switch to non-IBSS channels when working in IBSS mode, otherwise there are microcode errors, and after some time system crashes. This bug is only observable when software scan is used in IBSS mode, so should be considered as regression after: commit 0263aa45 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Tue Mar 29 11:24:21 2011 +0200 iwl3945: disable hw scan by default However IBSS mode check, which this patch add again, was removed by commit b2f30e8b Author: Johannes Berg <johannes.berg@intel.com> Date: Thu Jan 21 07:32:20 2010 -0800 iwlwifi: remove IBSS channel sanity check That commit claim that mac80211 will not use non-IBSS channel in IBSS mode, what definitely is not true. Bug probably should be fixed in mac80211, but that will require more work, so better to apply that patch temporally, and provide proper mac80211 fix latter. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=34452Reported-and-tested-by: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: stable@kernel.org # 2.6.38.5+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
during suspend/S3 state drv_flush is called from mac80211 irrespective of interface count. In ath9k we queue a work in ath9k_flush which we expect to be cancelled in the drv_stop call back. during suspend process mac80211 calls drv_stop only when the interface count(local->count) is non-zero. unfortunately when the network manager is enabled, drv_flush is called while drv_stop is not called as local->count reaches '0'. So fix this by simply checking for the device presence in the drv_flush call back in the driver before queueing work or anything else. this patch fixes the following WARNING Call Trace: [<c014c6e2>] warn_slowpath_common+0x72/0xa0 [<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211] [<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211] [<c014c75b>] warn_slowpath_fmt+0x2b/0x30 [<fc133f99>] ieee80211_can_queue_work+0x39/0x50 [mac80211] [<fc134ed1>] ieee80211_queue_delayed_work+0x21/0x50 [mac80211] [<fc1e5b22>] ath_tx_complete_poll_work+0xb2/0x100 [ath9k] [<c016399e>] run_workqueue+0x8e/0x150 [<fc1e5a70>] ? ath_tx_complete_poll_work+0x0/0x100 [ath9k] [<c0163ae4>] worker_thread+0x84/0xe0 [<c0167a60>] ? autoremove_wake_function+0x0/0x50 [<c0163a60>] ? worker_thread+0x0/0xe0 [<c01677d4>] kthread+0x74/0x80 [<c0167760>] ? kthread+0x0/0x80 [<c0104087>] kernel_thread_helper+0x7/0x10 ---[ end trace 2aff81010df9215b ]--- Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luciano Coelho authored
When we are disconnecting, we set PS off, but this happens before we send the deauth/disassoc request. When the deauth/disassoc frames are sent, we trigger the dynamic ps timer, which then times out and turns PS back on. Thus, PS remains on after disconnecting, causing problems when associating again. This can be fixed by preventing the timer to start when we're not associated anymore. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Pablo Neira Ayuso authored
This patch reverts a2361c87: "[PATCH] netfilter: xt_conntrack: warn about use in raw table" Florian Wesphal says: "... when the packet was sent from the local machine the skb already has ->nfct attached, and -m conntrack seems to do the right thing." Acked-by: Jan Engelhardt <jengelh@medozas.de> Reported-by: Florian Wesphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Fernando Luis Vazquez Cao authored
The mask indicates the bits one wants to zero out, so it needs to be inverted before applying to the original TOS field. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Fernando Luis Vazquez Cao authored
The IPv6 header is not zeroed out in alloc_skb so we must initialize it properly unless we want to see IPv6 packets with random TOS fields floating around. The current implementation resets the flow label but this could be changed if deemed necessary. We stumbled upon this issue when trying to apply a mangle rule to the RST packet generated by the REJECT target module. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Hans Schillstrom authored
DESCRIPTION This patch tries to restore the initial init and cleanup sequences that was before namspace patch. Netns also requires action when net devices unregister which has never been implemented. I.e this patch also covers when a device moves into a network namespace, and has to be released. IMPLEMENTATION The number of calls to register_pernet_device have been reduced to one for the ip_vs.ko Schedulers still have their own calls. This patch adds a function __ip_vs_service_cleanup() and an enable flag for the netfilter hooks. The nf hooks will be enabled when the first service is loaded and never disabled again, except when a namespace exit starts. Signed-off-by: Hans Schillstrom <hans@schillstrom.com> Acked-by: Julian Anastasov <ja@ssi.bg> [horms@verge.net.au: minor edit to changelog] Signed-off-by: Simon Horman <horms@verge.net.au>
-
Hans Schillstrom authored
If the sync daemons run in a name space while it crashes or get killed, there is no way to stop them except for a reboot. When all patches are there, ip_vs_core will handle register_pernet_(), i.e. ip_vs_sync_init() and ip_vs_sync_cleanup() will be removed. Kernel threads should not increment the use count of a socket. By calling sk_change_net() after creating a socket this is avoided. sock_release cant be used intead sk_release_kernel() should be used. Thanks Eric W Biederman for your advices. Signed-off-by: Hans Schillstrom <hans@schillstrom.com> [horms@verge.net.au: minor edit to changelog] Signed-off-by: Simon Horman <horms@verge.net.au>
-
Florian Westphal authored
The optimizations in commit 255d0dc3 (netfilter: x_table: speedup compat operations) assume that xt_compat_add_offset is called once per rule. ebtables however called it for each match/target found in a rule. The match/watcher/target parser already returns the needed delta, so it is sufficient to move the xt_compat_add_offset call to a more reasonable location. While at it, also get rid of the unused COMPAT iterator macros. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Eric Dumazet authored
commit 255d0dc3 (netfilter: x_table: speedup compat operations) made ebtables not working anymore. 1) xt_compat_calc_jump() is not an exact match lookup 2) compat_table_info() has a typo in xt_compat_init_offsets() call 3) compat_do_replace() misses a xt_compat_init_offsets() call Reported-by: dann frazier <dannf@dannf.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Pablo Neira Ayuso authored
This patch fixes the missing initialization of the start time if the timestamp support is enabled. libnetfilter_conntrack/utils# conntrack -E & libnetfilter_conntrack/utils# ./conntrack_create tcp 6 109 ESTABLISHED src=1.1.1.1 dst=2.2.2.2 sport=1025 dport=21 packets=0 bytes=0 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=21 dport=1025 packets=0 bytes=0 mark=0 delta-time=1303296401 use=2 Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
-