Same fix went in previously for some other files.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Mostly cleanups, fixes, and 'struct fence' conversion this time
around, with one reservation patch which is a-b Sumit (which the fence
conversion patches depend on).

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (25 commits)
  drm/msm: Drop load/unload drm_driver ops
  drm/msm: Centralize connector registration/unregistration
  drm/msm/hdmi: Prevent gpio_free related kernel warnings
  drm/msm: print offender task name on hangcheck recovery
  drm/msm: fix leak in failed submit path
  drm/msm: de-indent submit_create()
  drm/msm: drop return from gpu->submit()
  drm/msm/mdp4: Don't manage DSI PLL regulators in MDP driver
  drm/msm/edp: Drop regulator_set_voltage call
  drm/msm/dsi: Fix regulator API abuse
  drm/msm: Move call to PTR_ERR_OR_ZERO after reassignment
  drm/msm/mdp: Add support for more RGBX formats
  drm: msm: remove unused variable
  drm/msm: fix ->last_fence() after recover
  drm/msm: 'struct fence' conversion
  drm/msm: remove fence_cbs
  drm/msm: introduce msm_fence_context
  drm/msm: split locking and pinning BO's
  drm/msm/gpu: simplify tracking in-flight bo's
  drm/msm: split out timeout_to_jiffies helper
  ...

Refcounting is hard, so here's a quick pull request with the one-liner to
fix up i915. Otherwise just a few other small things I picked up. Plus the
regression fix from Marten for rmfb behaviour that lingered around forever
since no testers. Feel free to cherry-pick that over to drm-fixes, but
given that there's not many who seemed to have cared, meh.

* tag 'topic/drm-misc-2016-05-08' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Correctly refcount connectors in hw state readou
  drm/panel: Flesh out kerneldoc
  drm: Add gpu.tmpl docbook to MAINTAINERS entry
  drm/core: Do not preserve framebuffer on rmfb, v4.
  drm: Fix up markup fumble
  drm/fb_helper: Fix a few typos

The load/unload drm_driver ops are deprecated. They should be removed as
they result in creation of devices visible to userspace even before
the drm_device is registered.

Drop these ops and use drm_dev_alloc/register and drm_dev_unregister/unref
to explicitly create and destroy the drm device in the msm platform
driver's bind and unbind ops. With this in use, the drm connectors are
only registered once the drm_device is registered.

It also fixes the issue of stray debugfs files after the msm module is
removed. With this, all the debugfs files are removed, and allows
successive module insertions/removals.
Signed-off-by: Archit Taneja <architt@codeaurora.org>

Move the drm_connector registration from the encoder(HDMI/DSI etc) drivers
to the msm platform driver. This will simplify the task of ensuring that
the connectors are registered only after the drm_device itself is
registered.

The connectors' destroy ops are made to use kzalloc instead of
devm_kzalloc to ensure that that the connectors can be successfully
unregistered when the msm driver module is removed. The memory for the
connectors is unallocated when drm_mode_config_cleanup() is called
during either during an error or during driver remove.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Calling the legacy gpio_free on an invalid GPIO (a GPIO numbered -1)
results in kernel warnings. This causes a lot of backtraces when
we try to unload the drm/msm module.

Call gpio_free only on valid GPIOs.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Track the pid per submit, so we can print the name of the task which
submitted the batch that caused the gpu to hang.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

At this point, there is nothing left to fail.  And submit already has a
fence assigned and is added to the submit_list.  Any problems from here
on out are asynchronous (ie. hangcheck/recovery).
Signed-off-by: Rob Clark <robdclark@gmail.com>

The MDP4 driver tries to request and set voltages for regulators required
by the DSI PLLs.

Firstly, the MDP4 driver shouldn't manage the DSI regulators, this should
be handled in the DSI driver. Secondly, it shouldn't try to set a fixed
voltage for regulators. Voltage constraints should be specified on the
regulator via DT and managed by the regulator core.

Remove all the DSI PLL regulator related code from the MDP4 driver. It's
managed in the DSI driver for MSM8960/APQ8064 already.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The eDP driver tries to set a fixed voltage for one of its regulators(vdda)
before enabling it. This shouldn't be done by the driver, the voltage
constraints should be specified on the regulator via DT and managed by
the regulator core. A driver should call regulator_set_voltage only if
it needs to change the voltage during runtime. Drop the
regulator_set_voltage call. Mention in a comment the voltage that the
regulator expects.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The voltage changing code in this driver is broken and should be
removed.  The driver sets a single, exact voltage on probe.  Unless
there is a very good reason for this (which should be documented in
comments) constraints like this need to be set via the machine
constraints, voltage setting in a driver is expected to be used in cases
where the voltage varies at runtime.

In addition client drivers should almost never be calling
regulator_can_set_voltage(), if the device needs to set a voltage it
needs to set the voltage and the regulator core will handle the case
where the regulator is fixed voltage.  If the driver simply skips
setting the voltage if it doesn't have permission then it should just
not bother in the first place.

Originally authored by Mark Brown <broonie@kernel.org>

Remove the min/max voltage data entries per SoC managed by the driver.
These aren't needed as we don't try to set voltages any more. Mention in
comments the voltages that each regulator expects.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Here, a location is reset to NULL before being passed to PTR_ERR.
So, PTR_ERR should be called before its argument is reassigned
to NULL. Further to simplify things use PTR_ERR_OR_ZERO instead
of PTR_ERR and IS_ERR.

Problem found using Coccinelle.
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
[fixed fmt string warning (s/%ld/%d/)]
Signed-off-by: Rob Clark <robdclark@gmail.com>

Android needs XBGR8888 format. Add all the missing 32-bpp formats
without alpha for completeness.

Cc: Archit Taneja <architt@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Archit Taneja  <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

A recent cleanup removed the only user of the 'kms' variable in
msm_preclose(), causing a harmless compiler warning:

drivers/gpu/drm/msm/msm_drv.c: In function 'msm_preclose':
drivers/gpu/drm/msm/msm_drv.c:468:18: error: unused variable 'kms' [-Werror=unused-variable]

This removes the variable as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4016260b ("drm/msm: fix bug after preclose removal")
Signed-off-by: Rob Clark <robdclark@gmail.com>

It is no longer true that we discard all in-flight submits on recover
(these days we only discard the first one that hung).  After the first
re-submitted batch completes it would overwrite the fence with a correct
value, but there would be a window of time which showed all re-submitted
batches as already complete.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

This was only used for atomic commit these days.  So instead just give
atomic it's own work-queue where we can do a block on each bo in turn.
Simplifies things a whole bunch and makes the 'struct fence' conversion
easier.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Better encapsulate the per-timeline stuff into fence-context.  For now
there is just a single fence-context, but eventually we'll also have one
per-CRTC to enable fully explicit fencing.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Split up locking and pinning buffers in the submit path.  This is needed
because we'll want to insert fencing in between the two steps.

This makes things end up looking more similar to etnaviv submit code
(which was originally modelled on the msm code but has already added
'struct fence' support).
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since we already track the array of bo's in the submit object, just
unconditionally take and drop ref's per submit (rather than only taking
ref's if bo is not already active).  This simplifies later patches.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

This was always the intention, but somehow it was never wired up
properly.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

In the atomic modesetting path, each driver simply wants to grab a ref
to the exclusive fence from a reservation object to store in the incoming
drm_plane_state, without doing the whole RCU dance.  Since each driver
will need to do this, lets make a helper.

v2: rename to _rcu instead of _unlocked to be more consistent
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>

It is already optional at runtime.  But this at least simplifies
backports to kernels without QCOM_SCM.
Signed-off-by: Rob Clark <robdclark@gmail.com>

This was forgotten when adding the the refcounting to
drm_connector_state.

v2: Don't forget to unreference existing connectors. This isn't
relevant on driver load, but this code also runs on resume, and there
we already have an atomic state. Spotted by Chris Wilson.

Cc: Gabriel Feceoru <gabriel.feceoru@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Marius Vlad <marius.c.vlad@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Fixes: d2307dea ("drm/atomic: use connector references (v3)")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462541943-19620-1-git-send-email-daniel.vetter@ffwll.ch

Write more complete kerneldoc comments for the DRM panel API and
integrate the helpers in the DRM DocBook reference.

Signed-off-by: Thierry Reding <treding@nvidia.com>drm/panel: Add helper for simple panel connector
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160506140137.GA4641@ulmo.ba.sec

fsl-dcu pixel clock polarity support
* 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: use bus_flags for pixel clock polarity
  drm: introduce bus_flags in drm_display_info

This is the first big radeon/amdgpu pull request for 4.7.  Highlights:
    - Polaris support in amdgpu
      Current display stack on par with other asics, for advanced features DAL is required
      Power management support
      Support for GFX, Compute, SDMA, UVD, VCE
    - VCE and UVD init/fini cleanup in radeon
    - GPUVM improvements
    - Scheduler improvements
    - Clockgating improvements
    - Powerplay improvements
    - TTM changes to support driver specific LRU update mechanism
    - Radeon support for new Mesa features
    - ASYNC pageflip support for radeon
    - Lots of bug fixes and code cleanups

* 'drm-next-4.7' of git://people.freedesktop.org/~agd5f/linux: (180 commits)
  drm/amdgpu: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
  drm/amdgpu: use drm_mode_vrefresh() rather than mode->vrefresh
  drm/amdgpu/uvd6: add bypass support for fiji (v3)
  drm/amdgpu/fiji: set UVD CG state when enabling UVD DPM (v2)
  drm/powerplay: add missing clockgating callback for tonga
  drm/amdgpu: Constify some tables
  drm/amd/powerplay: Delete dead struct declaration
  drm/amd/powerplay/hwmgr: don't add invalid voltage
  drm/amd/powerplay/hwmgr: prevent VDDC from exceeding 2V
  MAINTAINERS: Remove unneded wildcard for the Radeon/AMDGPU drivers
  drm/radeon: add cayman VM support for append packet.
  drm/amd/amdgpu: Add debugfs entries for smc/didt/pcie
  drm/amd/amdgpu: Drop print_status callbacks.
  drm/amd/powerplay: revise reading/writing pptable on Polaris10
  drm/amd/powerplay: revise reading/writing pptable on Tonga
  drm/amd/powerplay: revise reading/writing pptable on Fiji
  drm/amd/powerplay: revise caching the soft pptable and add it's size
  drm/amd/powerplay: add dpm force multiple levels on cz/tonga/fiji/polaris (v2)
  drm/amd/powerplay: fix fan speed percent setting error on Polaris10
  drm/amd/powerplay: fix bug dpm can't work when resume back on Polaris
  ...

The drivers current default configuration drives the pixel data
on rising edge of the pixel clock. However, most display sample
data on rising edge... This leads to color shift artefacts visible
especially at edges.

This patch changes the relevant defines to be useful and actually
set the bits, and changes pixel clock polarity to drive the pixel
data on falling edge by default. The patch also adds an explicit
pixel clock polarity flag to the display introduced with the driver
(NEC WQVGA "nec,nl4827hc19-05b") using the new bus_flags field to
retain the initial behavior.
Signed-off-by: Stefan Agner <stefan@agner.ch>

Introduce bus_flags to specify display bus properties like signal
polarities. This is useful for parallel display buses, e.g. to
specify the pixel clock or data enable polarity.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>

Patches get misrouted and lost otherwise. And use * to future-proof
for sphinx (or whatever the documentation nirvana toolchain will be).

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462225780-3663-1-git-send-email-daniel.vetter@ffwll.ch

It turns out that preserving framebuffers after the rmfb call breaks
vmwgfx userspace. This was originally introduced because it was thought
nobody relied on the behavior, but unfortunately it seems there are
exceptions.

drm_framebuffer_remove may fail with -EINTR now, so a straight revert
is impossible. There is no way to remove the framebuffer from the lists
and active planes without introducing a race because of the different
locking requirements. Instead call drm_framebuffer_remove from a
workqueue, which is unaffected by signals.

Changes since v1:
- Add comment.
Changes since v2:
- Add fastpath for refcount = 1. (danvet)
Changes since v3:
- Rebased.
- Restore lastclose framebuffer removal too.

Cc: stable@vger.kernel.org #v4.4+
Fixes: 13803132 ("drm/core: Preserve the framebuffer after removing it.")
Testcase: kms_rmfb_basic
References: https://lists.freedesktop.org/archives/dri-devel/2016-March/102876.html
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com> #v3
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/6c63ca37-0e7e-ac7f-a6d2-c7822e3d611f@linux.intel.com

It's & for struct references, not #.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462369327-26659-1-git-send-email-daniel.vetter@ffwll.ch

s/modest/modeset/
s/aftert/after/
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462375734-8213-3-git-send-email-cpaul@redhat.com

Don't just free the connector when we get the destroy callback.

Drop a reference to it, and set it's mst_port to NULL so
no more mst work is done on it.

v2: core mst accepts NULLs fine. Cleanup EDID code properly.
v3: drop the extra reference we were taking.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Take a reference when setting a crtc on a connecter,
also take one when duplicating if a crtc is set,
and drop one on destroy if a crtc is set.

v2: take Daniel Stone's advice and simplify the
ref/unref dances, also take care of NULL as connector
to state reset.

v3: remove need for connector NULL check.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>