- 11 Dec, 2018 32 commits
-
-
Ben Skeggs authored
Appears to be compatible with GM200. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Appears to be compatible with GK104. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
The GPU executes DEVINIT itself now, which makes our lives a bit easier. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
No real surprises here so far. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Appears to be compatible with GP100. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Will be required for Turing. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
The token will also contain runlist ID on Turing, so instead expose it as an opaque value from NVKM so the client doesn't need to care. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
The GPU saves off some stuff to the address specified in this part of RAMFC when the channel faults, so we should probably point it at a valid address. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
The trick we used (and still use for older GPUs) doesn't work on Turing. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Turing will require different code. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
We're about to be adding more of them. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
We will need to bash different registers on Turing. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Will be used by SVM code to allow direct (without going through MMU) memcpy using the GPU copy engines. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Will be used to match fault buffer entries with a channel. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
This is needed for Turing, but we're supposed to wait for completion after re-writing the value on older GPUs anyway. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Aside from being a nice cleanup, these will to allow the upcoming direct page mapping interfaces to play nicely with normal mappings. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
The GPU will continually fire interrupts while a fault buffer GET != PUT, and to stop the spurious interrupts while the handler does its thing, we were disabling the fault buffer temporarily. This is not actually a great idea to begin with, and made worse by Volta resetting GET/PUT when it's reactivated. So, let's not do that. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Will allow more shared fault buffer handling code between Pascal/Volta. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Various structures are accessed by the GPU through BAR2 for some reason on newer GPUs. This commit makes it more convenient to handle. Will be used for GP100- fault buffers, and GV100- fault method buffers. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Will be used for Turing. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Turing GPUs can have more than one. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Lyude Paul authored
This makes debugging with DP tracing a lot harder to interpret, so name each i2c based off the name of the encoder that it's for Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Lyude Paul authored
We need to actually make sure we check this on resume since otherwise we won't know whether or not the topology is still there once we've resumed, which will cause us to still think the topology is connected even after it's been removed if the removal happens mid-suspend. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Lyude Paul authored
With this, nvbios /sys/kernel/debug/dri/*/vbios.rom now works! Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Lyude Paul authored
Since we already expose the vbios.rom file here, why not also expose the strap_peek? Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
- 07 Dec, 2018 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Final changes to drm-misc-next for v4.21: UAPI Changes: Core Changes: - Add dma_fence_get_stub to dma-buf, and use it in drm/syncobj. - Add and use DRM_MODESET_LOCK_BEGIN/END helpers. - Small fixes to drm_atomic_helper_resume(), drm_mode_setcrtc() and drm_atomic_helper_commit_duplicated_state() - Fix drm_atomic_state_helper.[c] extraction. Driver Changes: - Small fixes to tinydrm, vkms, meson, rcar-du, virtio, vkms, v3d, and pl111. - vc4: Allow scaling and YUV formats on cursor planes. - v3d: Enable use of the Texture Formatting Unit, and fix prime imports of buffers from other drivers. - Add support for the AUO G101EVN010 panel. - sun4i: Enable support for the H6 display engine. Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: added drm/v3d: fix broken build to the merge commit] From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/321be9d3-ab75-5f92-8193-e5113662edef@linux.intel.com
-
- 06 Dec, 2018 3 commits
-
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Pull request of 2018-12-05 Page flip with damage by Deepak and others, Various vmwgfx minor fixes anc cleanups. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181205103554.3675-1-thellstrom@vmware.com
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next - Refactoring of DMA and IOMMU code . This patch series simplifies DMA mapping creation by avoiding looping all components to get dma device object, reduces code size by merging IOMMU and DMA code. - Enhance plane alpha and blend mode support . This patch series adds configurable plane and pixel blend mode support for Exynos5433 DECON device. - Fix color format setting of Mixer driver . This patch series fixes color format and range setting by splitting range and format. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1544002853-11661-1-git-send-email-inki.dae@samsung.com
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amdgpu and amdkfd: - Freesync support - ABM support in DC - KFD support for vega12 and polaris12 - Add sdma paging queue support for vega - Use ACPI to query backlight range on supported platforms - Clean up doorbell handling - KFD fix for pasid handling under non-HWS - Misc cleanups and fixes scheduler: - Revert "fix timeout handling v2" radeon: - Fix possible overflow on 32 bit ttm: - Fix for LRU handling for ghost objects Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181130192505.2946-1-alexander.deucher@amd.com
-
- 05 Dec, 2018 4 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Final drm/i915 changes for v4.21: - ICL DSI video mode enabling (Madhav, Vandita, Jani, Imre) - eDP sink count fix (José) - PSR fixes (José) - DRM DP helper and i915 DSC enabling (Manasi, Gaurav, Anusha) - DP FEC enabling (Anusha) - SKL+ watermark/ddb programming improvements (Ville) - Pixel format fixes (Ville) - Selftest updates (Chris, Tvrtko) - GT and engine workaround improvements (Tvrtko) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87va496uoe.fsf@intel.com
-
Christian König authored
This reverts commit 9a09a423. The whole interface isn't thought through. Since this function can't fail we actually can't allocate an object to store the sync point. Sorry, I should have taken the lead on this from the very beginning and reviewed it more thoughtfully. Going to propose a new interface as a follow up change. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Link: https://patchwork.freedesktop.org/patch/265580/
-
Thomas Hellstrom authored
Our wrappers don't do anything useful anymore except calling the atomic helpers. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/vmwgfx/vmwgfx_fence.c: In function 'vmw_event_fence_action_seq_passed': drivers/gpu/drm/vmwgfx/vmwgfx_fence.c:909:19: warning: variable 'file_priv' set but not used [-Wunused-but-set-variable] struct drm_file *file_priv; It not used any more since commit fb740cf2 ("drm: Create drm_send_event helpers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-