- 06 Dec, 2014 27 commits
-
-
Mitch Williams authored
The ARQ needs to have at least as many entries as VFs, or the VFs will get errors from the FW when they send messages to the PF. Since we don't know how many VFs we'll end up with, just set up 128 descriptors. Change-ID: I04ae3d1c7faf09110eb782214e9c05aeb62a6c59 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
Jim Young <jamesx.m.young@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
There is an order in which this should happen. It turns out that FW will not let you change the Loopback setting of the VSI with update VSI prior to the VEB creation. Change-ID: I7614ddff8b4c37702930c02f16f8c346aaa64bd1 Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Anjali Singhai Jain authored
All VSIs on a VEB should either have loopback enabled or disabled, a mixed mode is not supported for a VEB. Since our driver supports multiple VSIs per PF that need to talk to each other make sure to enable Loopback for the PF and FDIR VSI as well. Also, we now have to explicitly enable Loopback mode otherwise we fail VSI creation for VMDq and VF VSIs. Change-ID: Ib68c3ea4aeb730ac9468f930610de456efbe5b20 Signed-off-by:
-
Kevin Scott authored
Increase reset delay to ensure all internal caches are properly flushed in worst case scenario. Change-ID: I6f059a9e024fbf9ef1debd32497eed21369957fc Signed-off-by:
Kevin Scott <kevin.c.scott@intel.com> Acked-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Mitch Williams authored
When multiple VFs attempt to initialize simultaneously, the firmware may delay or drop messages. Make the init code more adept at handling these situations by a) reinitializing the admin queue if the firmware fails to process a request, and b) resending a request if the PF doesn't answer. Once the request has been sent again, the PF might end up getting both requests and send the configuration information to the driver twice. This will cause the VF to complain about receiving an unexpected message from the PF. Since this is not fatal, reduce the warning level of the log messages that are generated in response to this event. Change-ID: I9370a1a2fde2ad3934fa25ccfd0545edfbbb4805 Signed-off-by:
-
Shannon Nelson authored
The old xxx_NETDEV_STAT() macro was defined long before the newer rtnl_link_stats64 came into being, and just never got updated. Since we're using rtnl_link_stats64 in other parts of the driver, we should use it here as well. We've just been lucky that the field definitions are the same sizes. Change-ID: I19fc71619905700235dcdf0d3c8153aec81d36de Signed-off-by:
-
Anjali Singhai Jain authored
This patch is useful for future expansion when new VF MAC types get added. It helps with cleaning up VF driver flow. Change-ID: Ibe1eeb71262a3a40f24a1c5409436bdc3411da7f Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
Add the Virtual Channel OP event opcode for CONFIG_RSS, so that the Virtual Channel state machine can properly decipher status change events. Change-ID: I09939c7aa380147f60c49fd01ef2e27d0dc1c299 Signed-off-by:
-
Jacob Keller authored
Resolve an issue related to images with multiple PFs per physical port. We cannot fully support 1588 PTP features, since only one port should control (ie: write) the registers at a time. Doing so can cause interference of functionality. It may be possible to partially implement the API for only those features without side effects. However, this at minimum means non controlling PFs lose Tx timestamps, frequency atunement, and possibly SYSTIME adjustment. There may be further impact I did not discover. Since the API in the kernel expects these features to work, it is simpler and less dangerous to just disable PTP features on all PFs not identified as the controlling PF in PRTTSYN_CTL0.PF_ID. This change also removes the warning printed when hwtstaml IOCTL is called on the wrong PF. This is actually meaningless now, since only one PF per port will support it. In addition, the ethtool get_ts_info IOCTL was updated so that only the controlling port will even indicate support (so as not to confuse users). The overall downside is complete loss of functionality on non controlling PF, vs the possible gain of partial support. The biggest factor for choosing this approach is simplicity and ensuring that the main PF will work. There could easily be other portions of the 1588 logic with side effects I am not aware, and the reduced functionality that might be made available is significantly less useful. In addition, the API does not allow for proper indication of why particular features are not supported. These reasons are enough to decide for the simpler approach to resolving this issue. Change-ID: If4696bae686fc18aef6552b67dd417213d987c16 Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Carolyn Wyborny authored
This patch adds additional text description for base pf0 and flow director generated interrupts. Without this patch, these interrupts are difficult to distinguish per port on a multi-function device. Change-ID: I4662e1b38840757765a3fe63d90219d28e76bfab Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by:
-
Shannon Nelson authored
Use the 'i' rather than the more restrictive 'x' or 'd' in the aq_cmd arguments. This makes the user interface much more forgiving and user friendly. Change-ID: I5dcd57b9befc047e06b74cf1152a25a3fa9e1309 Signed-off-by:
-
Shannon Nelson authored
This message really doesn't give any useful information and ends up getting printed every service_task loop in the Linux driver, filling the logfile with noise when AQ tracing is enabled. This patch simply removes the noise. Change-ID: I30ad51e6b03c7ad12a7d9c102def0087db622df3 Signed-off-by:
-
Shannon Nelson authored
This case statement is empty and the fall through just breaks out so remove the break and let it fall through to break out. Change-ID: I1b5ba9870d5245ca80bfca6e7f5f089e2eb8ccb0 Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== allow eBPF programs to be attached to sockets V1->V2: fixed comments in sample code to state clearly that packet data is accessed with LD_ABS instructions and not internal skb fields. Also replaced constants in: BPF_LD_ABS(BPF_B, 14 + 9 /* R0 = ip->proto */), with: BPF_LD_ABS(BPF_B, ETH_HLEN + offsetof(struct iphdr, protocol) /* R0 = ip->proto */), V1 cover: Introduce BPF_PROG_TYPE_SOCKET_FILTER type of eBPF programs that can be attached to sockets with setsockopt(). Allow such programs to access maps via lookup/update/delete helpers. This feature was previewed by bpf manpage in commit b4fc1a46("Merge branch 'bpf-next'") Now it can actually run. 1st patch adds LD_ABS/LD_IND instruction verification and 2nd patch adds new setsockopt() flag. Patches 3-6 are examples in assembler and in C. Though native eBPF programs are way more powerful than classic filters (attachable through similar setsockopt() call), they don't have skb field accessors yet. Like skb->pkt_type, skb->dev->ifindex are not accessible. There are sevaral ways to achieve that. That will be in the next set of patches. So in this set native eBPF programs can only read data from packet and access maps. The most powerful example is sockex2_kern.c from patch 6 where ~200 lines of C are compiled into ~300 of eBPF instructions. It shows how quite complex packet parsing can be done. LLVM used to build examples is at https://github.com/iovisor/llvm which is fork of llvm trunk that I'm cleaning up for upstreaming. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
sockex2_kern.c is purposefully large eBPF program in C. llvm compiles ~200 lines of C code into ~300 eBPF instructions. It's similar to __skb_flow_dissect() to demonstrate that complex packet parsing can be done by eBPF. Then it uses (struct flow_keys)->dst IP address (or hash of ipv6 dst) to keep stats of number of packets per IP. User space loads eBPF program, attaches it to loopback interface and prints dest_ip->#packets stats every second. Usage: $sudo samples/bpf/sockex2 ip 127.0.0.1 count 19 ip 127.0.0.1 count 178115 ip 127.0.0.1 count 369437 ip 127.0.0.1 count 559841 ip 127.0.0.1 count 750539 Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Alexei Starovoitov authored
this example does the same task as previous socket example in assembler, but this one does it in C. eBPF program in kernel does: /* assume that packet is IPv4, load one byte of IP->proto */ int index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); long *value; value = bpf_map_lookup_elem(&my_map, &index); if (value) __sync_fetch_and_add(value, 1); Corresponding user space reads map[tcp], map[udp], map[icmp] and prints protocol stats every second Signed-off-by: -
Alexei Starovoitov authored
simple .o parser and loader using BPF syscall. .o is a standard ELF generated by LLVM backend It parses elf file compiled by llvm .c->.o - parses 'maps' section and creates maps via BPF syscall - parses 'license' section and passes it to syscall - parses elf relocations for BPF maps and adjusts BPF_LD_IMM64 insns by storing map_fd into insn->imm and marking such insns as BPF_PSEUDO_MAP_FD - loads eBPF programs via BPF syscall One ELF file can contain multiple BPF programs. int load_bpf_file(char *path); populates prog_fd[] and map_fd[] with FDs received from bpf syscall bpf_helpers.h - helper functions available to eBPF programs written in C Signed-off-by:
-
Alexei Starovoitov authored
this socket filter example does: - creates arraymap in kernel with key 4 bytes and value 8 bytes - loads eBPF program which assumes that packet is IPv4 and loads one byte of IP->proto from the packet and uses it as a key in a map r0 = skb->data[ETH_HLEN + offsetof(struct iphdr, protocol)]; *(u32*)(fp - 4) = r0; value = bpf_map_lookup_elem(map_fd, fp - 4); if (value) (*(u64*)value) += 1; - attaches this program to raw socket - every second user space reads map[IPPROTO_TCP], map[IPPROTO_UDP], map[IPPROTO_ICMP] to see how many packets of given protocol were seen on loopback interface Usage: $sudo samples/bpf/sock_example TCP 0 UDP 0 ICMP 0 packets TCP 187600 UDP 0 ICMP 4 packets TCP 376504 UDP 0 ICMP 8 packets TCP 563116 UDP 0 ICMP 12 packets TCP 753144 UDP 0 ICMP 16 packets Signed-off-by: -
Alexei Starovoitov authored
introduce new setsockopt() command: setsockopt(sock, SOL_SOCKET, SO_ATTACH_BPF, &prog_fd, sizeof(prog_fd)) where prog_fd was received from syscall bpf(BPF_PROG_LOAD, attr, ...) and attr->prog_type == BPF_PROG_TYPE_SOCKET_FILTER setsockopt() calls bpf_prog_get() which increments refcnt of the program, so it doesn't get unloaded while socket is using the program. The same eBPF program can be attached to multiple sockets. User task exit automatically closes socket which calls sk_filter_uncharge() which decrements refcnt of eBPF program Signed-off-by:
-
Alexei Starovoitov authored
introduce program type BPF_PROG_TYPE_SOCKET_FILTER that is used for attaching programs to sockets where ctx == skb. add verifier checks for ABS/IND instructions which can only be seen in socket filters, therefore the check: if (env->prog->aux->prog_type != BPF_PROG_TYPE_SOCKET_FILTER) verbose("BPF_LD_ABS|IND instructions are only allowed in socket filters\n"); Signed-off-by: -
Jason Wang authored
To be more friendly with drop monitor, we should only call kfree_skb() when the packets were dropped and use consume_skb() in other cases. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Markus Elfring authored
The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
Olof Johansson <olof@lixom.net> Acked-by:
Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by:
-
Markus Elfring authored
The free_percpu() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Markus Elfring authored
The vfree() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Andy Shevchenko authored
Instead of using global variables we are going to use dynamically allocated memory. It allows to append a support of more than one ethernet adapter which might have different settings simultaniously. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following batch contains netfilter updates for net-next. Basically, enhancements for xt_recent, skip zeroing of timer in conntrack, fix linking problem with recent redirect support for nf_tables, ipset updates and a couple of cleanups. More specifically, they are: 1) Rise maximum number per IP address to be remembered in xt_recent while retaining backward compatibility, from Florian Westphal. 2) Skip zeroing timer area in nf_conn objects, also from Florian. 3) Inspect IPv4 and IPv6 traffic from the bridge to allow filtering using using meta l4proto and transport layer header, from Alvaro Neira. 4) Fix linking problems in the new redirect support when CONFIG_IPV6=n and IP6_NF_IPTABLES=n. And ipset updates from Jozsef Kadlecsik: 5) Support updating element extensions when the set is full (fixes netfilter bugzilla id 880). 6) Fix set match with 32-bits userspace / 64-bits kernel. 7) Indicate explicitly when /0 networks are supported in ipset. 8) Simplify cidr handling for hash:*net* types. 9) Allocate the proper size of memory when /0 networks are supported. 10) Explicitly add padding elements to hash:net,net and hash:net,port, because the elements must be u32 sized for the used hash function. Jozsef is also cooking ipset RCU conversion which should land soon if they reach the merge window in time. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-12-05 This series contains updates to ixgbe and ixgbevf. Alex provides a couple of patches to cleanup ixgbe. First cleans up the page reuse code getting it into a state where all the workarounds needed are in place as well as cleaning up a few minor oversights such as using __free_pages instead of put_page to drop a locally allocated page. Then cleans up the tail writes for the ixgbe descriptor queues. Mark Peterson adds support to lookup MAC addresses in Open Firmware or IDPROM. Emil provides patches for ixgbe and ixgbevf to fix an issue on rmmod and to add support for X550 in the VF driver. First removes the read/write operations to the CIAA/D registers since it can block access to the PCI config space and make use of standard kernel functions for accessing the PCI config space. Then fixes an issue where the driver has logic to free up used data in case any of the checks in ixgbe_probe() fail, however there is a similar set of cleanups that can occur on driver unload in ixgbe_remove() which can cause the rmmod command to crash. Don provides the remaining patches in the series to complete the addition of X550 support into the ixgbe driver. ==================== Signed-off-by:
-
- 05 Dec, 2014 13 commits
-
-
Emil Tantilov authored
This patch resolves couple of issues in ixgbevf_probe/remove(): 1. Fix a case where adapter->state is tested after free_netdev() this is same as the patch for ixgbe from Daniel Borkmann <dborkman@redhat.com>: commit b5b2ffc0 ("ixgbe: fix use after free adapter->state test in ixgbe_remove/ixgbe_probe") 2. Move pci_set_drvdata() after all the error checks in ixgbevf_probe() and then add a check in ixgbevf_probe() to avoid running the cleanup functions twice in cases where probe failed. CC: Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by:
-
Emil Tantilov authored
This patch adds initial support for VFs on a new mac - X550. The patch adds the basic structures and device IDs for the X550 VFs that would allow the driver to load and pass traffic. Signed-off-by:
-
Emil Tantilov authored
The driver has logic to free up used data in case any of the checks in ixgbe_probe() fail, however there is a similar set of cleanups that can occur on driver unload in ixgbe_remove() which can cause the rmmod command to crash. This patch aims to fix the logic by moving pci_set_drvdata() after all error checks and then adds a check in ixgbe_remove() to skip it altogether if adapter comes up empty. Signed-off-by:
-
Don Skidmore authored
Since we now support X550 mac's bump the version number to reflect this. Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by:
-
Don Skidmore authored
This patch extends the function pointer structure to include the new X550 class MAC types. This creates a new file ixgbe_x550.c that contains all of the new methods. Because of similarities to the X540 part in some cases we just use it's methods where they can be used without any modification. These exported functions are now defined in the new ixgbe_x540.h file. Signed-off-by:
-
Don Skidmore authored
Currently the shared code checksum calculation function only returns a u16 and cannot return an error code. Unfortunately a variety of errors can happen that completely prevent the calculation of a checksum. So, change the function return value from a u16 to an s32 and return a negative value on error, or the positive checksum value when there is no error. Signed-off-by:
-
Don Skidmore authored
Some X550 procedures will be using CS4227 PHY and need to perform combined read and write operations. This patch adds those methods. Signed-off-by:
-
Don Skidmore authored
The X550 hardware will use more bits in the mask, so change the prototypes to match. This larger mask will require changes in callers which use the higher bits. Likewise since X550 will use different semaphore mask values and will use the lan_id value. So save these values in the ixgbe_phy_info struct. Signed-off-by:
-
Don Skidmore authored
Since on X550 we use host interface commands to read,write and erase some commands require more time to complete. So this adds a timeout parameter to ixgbe_host_interface_command as wells as a return_data parameter allowing us to return with any data. Signed-off-by:
-
Don Skidmore authored
The new X550 family of MAC's will have a larger RSS hash (16 -> 64). It will also support individual VF to have their own independent RSS hash key. This patch will enable this functionality Signed-off-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
-
Emil Tantilov authored
Accessing the CIAA/D register can block access to the PCI config space. This patch removes the read/write operations to the CIAA/D registers and makes use of standard kernel functions for accessing the PCI config space. In addition it moves ixgbevf_check_for_bad_vf() into the watchdog subtask which reduces the frequency of the checks. CC: Alex Williamson <alex.williamson@redhat.com> Reported-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Martin K Petersen authored
Attempt to look up the MAC address in Open Firmware on systems that support it. On SPARC resort to using the IDPROM if no OF address is found. Signed-off-by:
Martin K Petersen <martin.petersen@oracle.com> Tested-by:
-
Alexander Duyck authored
This change cleans up the tail writes for the ixgbe descriptor queues. The current implementation had me confused as I wasn't sure if it was still making use of the surprise remove logic or not. It also adds the mmiowb which is needed on ia64, mips, and a couple other architectures in order to synchronize the MMIO writes with the Tx queue _xmit_lock spinlock. Cc: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by:
-
