- 01 Mar, 2018 17 commits
-
-
Laurent Pinchart authored
The wait_for_bit_change() function returns the value of the bit it polls. This requires the caller to compare the return value to the expected bit value. As all the existing callers need is to check whether the bit has reached the expected value, it's easier to return a boolean status from the function. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The omap_dss_register_driver(), omap_dss_unregister_driver() and dispc_enable_gamma_table() functions don't exist anymore, remove their prototypes. Signed-off-by:
-
Laurent Pinchart authored
The function is unused, remove it. Signed-off-by:
-
Laurent Pinchart authored
There's no reason to delay initialization of most of the driver (such as mapping memory I/O, getting clocks or enabling runtime PM) to the component master bind handler. This additionally fixes a real PM issue caused enabling runtime PM in the bind handler. The bind handler performs the following sequence of PM operations: pm_runtime_enable(dev); pm_runtime_get_sync(dev); ... (access the hardware to read the device revision) ... pm_runtime_put_sync(dev); If a failure occurs at this point, the error path calls pm_runtime_disable() to balance the pm_runtime_enable() call. To understand the problem, it should be noted that the bind handler is called when one of the component registers itself, which happens in the component's probe handler. Furthermore, as the components are children of the DSS, the device core calls pm_runtime_get_sync() on the DSS platform device before calling the component's probe handler. This increases the DSS power usage count but doesn't runtime resume the device, as runtime PM is disabled at that point. The bind handler is thus called with runtime PM disabled, with the device runtime suspended, but with the power usage count larger than 0. The pm_runtime_get_sync() call will thus further increase the power usage count and runtime resume the device. The pm_runtime_put_sync() handler will decrease the power usage count to a non-zero value and will thus not suspend the device. Finally, the pm_runtime_disable() call will disable runtime PM, preventing the pm_runtime_put() call in the device core from runtime suspending the device. The DSS device is thus left powered on. To fix this, move the initialization code from the bind handler to the probe handler. Signed-off-by:
-
Laurent Pinchart authored
A few functions defined in omapdss-base are internal to the module. Don't export them. Signed-off-by:
-
Laurent Pinchart authored
The function isn't used outside of its compilation unit, make it static. Signed-off-by:
-
Laurent Pinchart authored
The encoder drivers need a handle to the source they are connected to in order to control the source. All drivers get that handle at probe time, resulting in probe deferral when the source hasn't been probed yet. However they don't need the handle until their connect handler is called. Move retrieval of the source handle to the connect handler to avoid probe deferrals. Signed-off-by:
-
Laurent Pinchart authored
The connector drivers need a handle to the source they are connected to in order to control the source. All drivers get that handle at probe time, resulting in probe deferral when the source hasn't been probed yet. However they don't need the handle until their connect handler is called. Move retrieval of the source handle to the connect handler to avoid probe deferrals. Signed-off-by:
-
Laurent Pinchart authored
The connector drivers need a handle to the source they are connected to in order to control the source. All drivers get that handle at probe time, resulting in probe deferral when the source hasn't been probed yet. However they don't need the handle until their connect handler is called. Move retrieval of the source handle to the connect handler to avoid probe deferrals. Signed-off-by:
-
Laurent Pinchart authored
No panel is instantiated through platform data anymore, there is no need to check for OF node presence. Signed-off-by:
-
Laurent Pinchart authored
No encoder is instantiated through platform data anymore, there is no need to check for OF node presence. Signed-off-by:
-
Laurent Pinchart authored
No connector is instantiated through platform data anymore, there is no need to check for OF node presence. Signed-off-by:
-
Laurent Pinchart authored
The tvc_of_match variable is never referenced before its definition. Remove the forward declaration. Signed-off-by:
-
Laurent Pinchart authored
The kernel favours 'unsigned int' over plain 'unsigned'. Replace all occurences of the latter by the former. This avoid lots of checkpatch complaints in patches that touch lines where a plain 'unsigned' is used. Signed-off-by:
-
Laurent Pinchart authored
The standard kernel integer types are [us]{8,16,32}. Use them instead of the u?int{8,16,32}_t types. Signed-off-by: -
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Driver Changes: - Lift alpha_support protection from Cannonlake (Rodrigo) * Meaning the driver should mostly work for the hardware we had at our disposal when testing * Used to be preliminary_hw_support - Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo) - Cannonlake port register fix (Mahesh) - Fix Dell Venue 8 Pro black screen after modeset (Hans) - Fix for always returning zero out-fence from execbuf (Daniele) - Fix HDMI audio when no no relevant video output is active (Jani) - Fix memleak of VBT data on driver_unload (Hans) - Fix for KASAN found locking issue (Maarten) - RCU barrier consolidation to improve igt/gem_sync/idle (Chris) - Optimizations to IRQ handlers (Chris) - vblank tracking improvements (64-bit resolution, PM) (Dhinakaran) - Pipe select bit corrections (Ville) - Reduce runtime computed device_info fields (Chris) - Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris) - A bunch of kerneldoc warning fixes (Chris) * tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits) drm/i915: Update DRIVER_DATE to 20180221 drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning drm/i915: Move the policy for placement of the GGTT vma into the caller drm/i915: Also check view->type for a normal GGTT view drm/i915: Drop WaDoubleCursorLP3Latency:ivb drm/i915: Set the primary plane pipe select bits on gen4 drm/i915: Don't set cursor pipe select bits on g4x+ drm/i915: Assert that we don't overflow frontbuffer tracking bits drm/i915: Track number of pending freed objects drm/i915/: Initialise trans_min for skl_compute_transition_wm() drm/i915: Clear the in-use marker on execbuf failure drm/i915: Prune gen8_gt_irq_handler drm/i915: Track GT interrupt handling using the master iir drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use drm: intel_dpio_phy: fix kernel-doc comments at nested struct drm/i915: Release connector iterator on a digital port conflict. drm/i915/execlists: Remove too early assert drm/i915: Assert that we always complete a submission to guc/execlists drm: move read_domains and write_domain into i915 ...
-
https://github.com/jsarha/linuxDave Airlie authored
drm/tilcdc changes to v4.17 * tag 'tilcdc-4.17' of https://github.com/jsarha/linux: drm/tilcdc: tilcdc_panel: Rename device from "panel" to "tilcdc-panel" drm/tilcdc: Add support for drm panels drm/tilcdc: panel: Use common error handling code in of_get_panel_info() drm/tilcdc: Delete an error message for a failed memory allocation in seven functions
-
- 28 Feb, 2018 5 commits
-
-
Jyri Sarha authored
Rename the bundled tilcdc_panel driver from just "panel" to "tilcdc-panel" to avoid noisy error messages from the driver trying to probe all device nodes named "panel". Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
-
Jyri Sarha authored
Add support for drm panels to tilcdc. Adding the support on top of the existing bridge support needs only couple of lines of code when using using the drm panel bridge helpers. Signed-off-by:
-
Markus Elfring authored
Add a jump target so that a bit of exception handling can be better reused at the end of this function. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- Expose thermal thresholds through hwmon properly - Rework HDP flushing for rings and CPU - Improved dual-link DVI handling in DC - Lots of code clean up - Additional DC clean up - Allow scanout from system memory on CZ/BR/ST - Improved PASID/VM integration - Expose GPU voltage and power via hwmon - Initial wattman-like support - Initial power profiles for use-case optimized performance - Rework GPUVM TLB flushing - Rework IP offset handling for SOC15 asics - Add CRC support in DC - Fixes for mmhub powergating - Initial regamma/degamma/CTM support in DC - ttm cleanups and simplifications - ttm OOM avoidance fixes * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (348 commits) Revert "drm/radeon/pm: autoswitch power state when in balanced mode" drm/radeon: use drm_gem_private_object_init drm/amdgpu: use drm_gem_private_object_init drm/amdgpu: mitigate workaround for i915 drm/amdgpu: implement amdgpu_gem_map_(attach/detach) drm/amdgpu/powerplay/smu7: drop refresh rate checks for mclk switching drm/amdgpu/cgs: add refresh rate checking to non-DC display code drm/amd/powerplay/smu7: allow mclk switching with no displays drm/amd/powerplay/vega10: allow mclk switching with no displays drm/amd/powerplay: use PP_CAP macro for disable_mclk_switching_for_frame_lock drm/amd/powerplay: remove unused headers drm/amdgpu_gem: fix error handling path in amdgpu_gem_va_update_vm drm/amdgpu: update the PASID mapping only on demand drm/amdgpu: separate PASID mapping from VM flush v2 drm/amd/display: Fix increment when sampling OTF in DCE drm/amd/display: De PQ implementation drm/amd/display: Remove unused dm_pp_ interfaces drm/amd/display: Add logging for aux DPCD access drm/amd/display: Set vsc pack revision when DPCD revision is >= 1.2 drm/amd/display: provide an interface to query firmware version ...
-
- 23 Feb, 2018 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.17: Cross-subsystem Changes: - Backlight helpers to enable/disable and find devices in dt (Meghana) Core Changes: - Documentation improvements (Chris/Daniel/Jani) - simple_kms_helper: Add mode_valid() support (Linus) - mm: Fix bug in interval_tree causing nodes to be out-of-order (Chris) Driver Changes: - tinydrm/panel: Use the new backlight helpers (Meghana) - rockchip: Support gem_prime_import_sg_table + some fixes (Various) - sun4i: Add A83T HDMI support using dw-hdmi (Jernej) Cc: Meghana Madhyastha <meghana.madhyastha@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jernej Skrabec <jernej.skrabec@siol.net> * tag 'drm-misc-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc: (41 commits) drm/omapdrm: Use of_find_backlight helper drm/panel: Use of_find_backlight helper drm/omapdrm: Use backlight_enable/disable helpers drm/panel: Use backlight_enable/disable helpers drm/tinydrm: Call devres version of of_find_backlight drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlight drm/tinydrm: Convert tinydrm_enable/disable_backlight to backlight_enable/disable drm: add documentation for tv connector state margins drm/doc: Use new substruct support drm/doc: Polish for drm_mode_parse_command_line_for_connector drm/docs: Document "scaling mode" property better drm/docs: Align layout of optional plane blending properties drm/docs: Discourage adding more to kms-properties.csv drm: simple_kms_helper: Add mode_valid() callback support drm/todo: Add idr_init_base todo drm: Use idr_init_base(1) when using id==0 for invalid drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem dma-buf/sw_sync: Fix kerneldoc warnings drm: Fix kerneldoc warnings for drm_lease ...
-
- 21 Feb, 2018 1 commit
-
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 20 Feb, 2018 16 commits
-
-
Alex Deucher authored
This reverts commit 1c331f75. Breaks resume on some systems. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=100759Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
LVDS startup fixes, enable VSP compositor on GEN3 * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: lvds: Refactor LVDS startup drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen3 drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen2 drm: rcar-du: lvds: Fix LVDS clock frequency range drm: rcar-du: lvds: Fix LVDCR1 for R-Car gen3 drm: rcar-du: Enable VSP compositor by default on Gen3 drm: rcar-du: Calculate DPLLCR to be more small jitter drm: rcar-du: Use 1000 to avoid misunderstanding in rcar_du_dpll_divider() drm: rcar-du: Remove zpos field from rcar_du_vsp_plane_state structure
-
Christian König authored
We use our own backing store and don't need the shmem file. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Christian König authored
We use our own backing store and don't need the shmem file. Signed-off-by:
-
Christian König authored
To be able to use DRI_PRIME with amdgpu and i915 we add all our fences only as exclusive ones. Disable that behavior when sharing between amdgpu itself cause it hinders concurrent execution. Signed-off-by:
-
Christian König authored
Instead of the pin/unpin callback implement the attach/detach ones. Functional identical, but allows us access to the attachment. Signed-off-by:
-
Chris Wilson authored
Rather than trusting the cached value of plane_state->vma->fence to imply whether the plane_state itself holds a reference on the framebuffer's fence, use the information provided in the plane_state->flags (PLANE_HAS_FENCE). Note that we still assume that FBC is entirely bounded by the plane_state active life span; it's not clear if that is a safe assumption. Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
Use the information about the fence state from the time of pinning to determine if the fbdev writes are going through a fence. This avoids any confusion in cases where the fence may appear or disappear unconnected to the use by fbdev. Suggested-by:
-
Chris Wilson authored
Currently we make the unilateral decision inside i915_gem_object_pin_to_display() where the VMA should resided (inside the fence and mappable region or above?). This is not our decision to make as it impacts on how the display engine can use the resulting scanout object, and it would rather instruct us where to place the VMA so that it can enable the features it wants. As such, make the pin flags an argument to i915_gem_object_pin_to_display() and control them from intel_pin_and_fence_fb_obj() Whilst taking control of the mapping for ourselves, start tracking how we use it to avoid trying to free a fence we never claimed: <3>[ 227.151869] GEM_BUG_ON(vma->fence->pin_count <= 0) <4>[ 227.152064] ------------[ cut here ]------------ <2>[ 227.152068] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:391! <4>[ 227.152084] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI <0>[ 227.152092] Dumping ftrace buffer: <0>[ 227.152099] (ftrace buffer empty) <4>[ 227.152102] Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich e1000e mei_me mei prime_numbers <4>[ 227.152131] CPU: 1 PID: 1587 Comm: kworker/u16:49 Tainted: G U 4.16.0-rc1-gbab67b2f6177-kasan_7+ #1 <4>[ 227.152134] Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 <4>[ 227.152236] Workqueue: events_unbound intel_atomic_commit_work [i915] <4>[ 227.152292] RIP: 0010:intel_unpin_fb_vma+0x23a/0x2a0 [i915] <4>[ 227.152295] RSP: 0018:ffff88005aad7b68 EFLAGS: 00010286 <4>[ 227.152300] RAX: 0000000000000026 RBX: ffff88005c359580 RCX: 0000000000000000 <4>[ 227.152304] RDX: 0000000000000026 RSI: ffffffff8707d840 RDI: ffffed000b55af63 <4>[ 227.152307] RBP: ffff880056817e58 R08: 0000000000000001 R09: 0000000000000000 <4>[ 227.152311] R10: ffff88005aad7b88 R11: 0000000000000000 R12: ffff8800568184d0 <4>[ 227.152314] R13: ffff880065b5ab08 R14: 0000000000000000 R15: dffffc0000000000 <4>[ 227.152318] FS: 0000000000000000(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 <4>[ 227.152322] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 227.152325] CR2: 00007f5fb25550a8 CR3: 0000000068c78000 CR4: 00000000000006e0 <4>[ 227.152328] Call Trace: <4>[ 227.152385] intel_cleanup_plane_fb+0x6b/0xd0 [i915] <4>[ 227.152395] drm_atomic_helper_cleanup_planes+0x166/0x280 <4>[ 227.152452] intel_atomic_commit_tail+0x159d/0x3380 [i915] <4>[ 227.152463] ? process_one_work+0x66e/0x1460 <4>[ 227.152516] ? skl_update_crtcs+0x9c0/0x9c0 [i915] <4>[ 227.152523] ? lock_acquire+0x13d/0x390 <4>[ 227.152527] ? lock_acquire+0x13d/0x390 <4>[ 227.152534] process_one_work+0x71a/0x1460 <4>[ 227.152540] ? __schedule+0x815/0x1e20 <4>[ 227.152547] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 <4>[ 227.152553] ? _raw_spin_lock_irq+0xa/0x40 <4>[ 227.152559] worker_thread+0xdf/0xf60 <4>[ 227.152569] ? process_one_work+0x1460/0x1460 <4>[ 227.152573] kthread+0x2cf/0x3c0 <4>[ 227.152578] ? _kthread_create_on_node+0xa0/0xa0 <4>[ 227.152583] ret_from_fork+0x3a/0x50 <4>[ 227.152591] Code: c6 00 11 86 c0 48 c7 c7 e0 bd 85 c0 e8 60 e7 a9 c4 0f ff e9 1f fe ff ff 48 c7 c6 40 10 86 c0 48 c7 c7 e0 ca 85 c0 e8 2b 95 bd c4 <0f> 0b 48 89 ef e8 4c 44 e8 c4 e9 ef fd ff ff e8 42 44 e8 c4 e9 <1>[ 227.152720] RIP: intel_unpin_fb_vma+0x23a/0x2a0 [i915] RSP: ffff88005aad7b68 v2: i915_vma_pin_fence() is a no-op if a fence isn't required, so check vma->fence as well. Signed-off-by:
-
Chris Wilson authored
We cannot simply use !view as shorthand for all normal GGTT views as a few callers will always populate a i915_ggtt_view struct and set the type to NORMAL instead. So check for (!view || view->type == NORMAL) inside i915_gem_object_ggtt_pin(). Signed-off-by:
-
Ville Syrjälä authored
WaDoubleCursorLP3Latency was meant for pre-production hardware. Drop it. Signed-off-by:
Mika Kahola <mika.kahola@intel.com>
-
Ville Syrjälä authored
i965 and g4x still have the pipe select bits in the plane control registers, they're just hardcoded to select a specific pipe. However plane C on i965 can still move between the pipes, thus we should program the pipe select bits on i965 if we want to expose plane C some day. Since there is no harm in programming the bits on any plane on i965/g4x let's just always set them. This will also make our pre-computed register value match what the hardware register would read, should we want to cross check the two. Signed-off-by:
-
Ville Syrjälä authored
G4x cursor control registers still allow us to write to the pipe select bits even though cursors are supposed to be fixed to a specific pipe. Bspec tells us that we should only ever write 0 to these bits. Let's follow that recommendation. On ilk+ the bits become hardwired to 0. Also looks like ICL repurposes these bits for some other use, so we had better stop setting them to bogus values there. Signed-off-by:
-
Ville Syrjälä authored
Add some compile time assrts to the frontbuffer tracking to make sure that we have enough bits per pipe to cover all the planes, and that we have enough total bits to cover all the planes across all pipes. We'll ignore any potential clash between the overlay bit and the plane bits because that will allow us to keep using a total of 32 bits for the foreseeable future. While at it change the macros to use BIT() and GENMASK(). The latter gets rid of the hardcoded 0xff and thus means we can change the number of bits per pipe by just changing INTEL_FRONTBUFFER_BITS_PER_PIPE. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Meghana Madhyastha authored
Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/eb914313f9d0e58d81572ccd3c718a573a891bd7.1516810726.git.meghana.madhyastha@gmail.com
-
Meghana Madhyastha authored
Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
