Boards can have different supplied voltages on different SD card slots. This
information has to be passed down to the SD/MMC driver.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

kfr2r09 board has a micro-SD card slot, therefore card write-protection
detection cannot work there, disable it.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Write-protection status is not always available, e.g., micro-SD cards do not
have a write-protection switch at all. This patch adds a flag to let platforms
force tmio_mmc to consider the card writable.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

SDHI controllers on SuperH, served by the tmio_mmc driver, can use slave DMA
for data transfer. This patch adds support for the dmaengine API to the
tmio_mmc driver.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Pass DMA slave IDs from platform down to the tmio_mmc driver, to be used
for dmaengine configuration.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

After this patch, if the "dma" pointer in struct tmio_mmc_data is not NULL, it
points to a struct, containing two tokens, that have to be passed to the
dmaengine driver for channel configuration.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add a list of SCIF and SDHI DMA slave definitions to sh7724.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

SuperH SDHI controllers can use DMA, add slave definitions to sh7722.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Now that DMA slave IDs are only used used in platform specific code and have
become opaque cookies for the rest of the code, we can make the, CPU specific
too.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add platform bindings, GPIO initialisation and allocation and AK8813 reset code
to ms7724se.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Ecovec uses the AK8813 video envoder similarly to the ms7724se platform with
the only difference, that on ecovec GPIOs are used for resetting and powering
up and down the chip.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Presently the dwarf unwinder build blows up if modules are disabled,
fix it up.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Remove duplicated #include('s) in
  arch/sh/kernel/cpu/sh4a/clock-sh7786.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Fix printk formats:

  drivers/video/fbmem.c: In function 'fb_do_apertures_overlap':
  drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t'
  drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'resource_size_t'
  drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t'
  drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'resource_size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The declarations for elf_core_extra_phdrs() et al got added on the
wrong side of #ifdef __KERNEL__ in linux/elfcore.h so they leak into
the user header copy and we get a warning at build time about it.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
  fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
  get rid of home-grown mutex in cris eeprom.c
  switch ecryptfs_write() to struct inode *, kill on-stack fake files
  switch ecryptfs_get_locked_page() to struct inode *
  simplify access to ecryptfs inodes in ->readpage() and friends
  AFS: Don't put struct file on the stack
  Ban ecryptfs over ecryptfs
  logfs: replace inode uid,gid,mode initialization with helper function
  ufs: replace inode uid,gid,mode initialization with helper function
  udf: replace inode uid,gid,mode init with helper
  ubifs: replace inode uid,gid,mode initialization with helper function
  sysv: replace inode uid,gid,mode initialization with helper function
  reiserfs: replace inode uid,gid,mode initialization with helper function
  ramfs: replace inode uid,gid,mode initialization with helper function
  omfs: replace inode uid,gid,mode initialization with helper function
  bfs: replace inode uid,gid,mode initialization with helper function
  ocfs2: replace inode uid,gid,mode initialization with helper function
  nilfs2: replace inode uid,gid,mode initialization with helper function
  minix: replace inode uid,gid,mode init with helper
  ext4: replace inode uid,gid,mode init with helper
  ...

Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits)
  PCI: hotplug: pciehp: Removed check for hotplug of display devices
  PCI: read memory ranges out of Broadcom CNB20LE host bridge
  PCI: Allow manual resource allocation for PCI hotplug bridges
  x86/PCI: make ACPI MCFG reserved error messages ACPI specific
  PCI hotplug: Use kmemdup
  PM/PCI: Update PCI power management documentation
  PCI: output FW warning in pci_read/write_vpd
  PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments
  PCI quirks: disable msi on AMD rs4xx internal gfx bridges
  PCI: Disable MSI for MCP55 on P5N32-E SLI
  x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs
  PCI: aerdrv: trivial cleanup for aerdrv_core.c
  PCI: aerdrv: trivial cleanup for aerdrv.c
  PCI: aerdrv: introduce default_downstream_reset_link
  PCI: aerdrv: rework find_aer_service
  PCI: aerdrv: remove is_downstream
  PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS
  PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC
  PCI: aerdrv: rework do_recovery
  PCI: aerdrv: rework get_e_source()
  ...

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables
  intel-iommu: Combine the BIOS DMAR table warning messages
  panic: Add taint flag TAINT_FIRMWARE_WORKAROUND ('I')
  panic: Allow warnings to set different taint flags
  intel-iommu: intel_iommu_map_range failed at very end of address space
  intel-iommu: errors with smaller iommu widths
  intel-iommu: Fix boot inside 64bit virtualbox with io-apic disabled
  intel-iommu: use physfn to search drhd for VF
  intel-iommu: Print out iommu seq_id
  intel-iommu: Don't complain that ACPI_DMAR_SCOPE_TYPE_IOAPIC is not supported
  intel-iommu: Avoid global flushes with caching mode.
  intel-iommu: Use correct domain ID when caching mode is enabled
  intel-iommu mistakenly uses offset_pfn when caching mode is enabled
  intel-iommu: use for_each_set_bit()
  intel-iommu: Fix section mismatch dmar_ir_support() uses dmar_tbl.

* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (27 commits)
  drivers/char: Eliminate use after free
  virtio: console: Accept console size along with resize control message
  virtio: console: Store each console's size in the console structure
  virtio: console: Resize console port 0 on config intr only if multiport is off
  virtio: console: Add support for nonblocking write()s
  virtio: console: Rename wait_is_over() to will_read_block()
  virtio: console: Don't always create a port 0 if using multiport
  virtio: console: Use a control message to add ports
  virtio: console: Move code around for future patches
  virtio: console: Remove config work handler
  virtio: console: Don't call hvc_remove() on unplugging console ports
  virtio: console: Return -EPIPE to hvc_console if we lost the connection
  virtio: console: Let host know of port or device add failures
  virtio: console: Add a __send_control_msg() that can send messages without a valid port
  virtio: Revert "virtio: disable multiport console support."
  virtio: add_buf_gfp
  trans_virtio: use virtqueue_xxx wrappers
  virtio-rng: use virtqueue_xxx wrappers
  virtio_ring: remove a level of indirection
  virtio_net: use virtqueue_xxx wrappers
  ...

Fix up conflicts in drivers/net/virtio_net.c due to new virtqueue_xxx
wrappers changes conflicting with some other cleanups.

* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (269 commits)
  KVM: x86: Add missing locking to arch specific vcpu ioctls
  KVM: PPC: Add missing vcpu_load()/vcpu_put() in vcpu ioctls
  KVM: MMU: Segregate shadow pages with different cr0.wp
  KVM: x86: Check LMA bit before set_efer
  KVM: Don't allow lmsw to clear cr0.pe
  KVM: Add cpuid.txt file
  KVM: x86: Tell the guest we'll warn it about tsc stability
  x86, paravirt: don't compute pvclock adjustments if we trust the tsc
  x86: KVM guest: Try using new kvm clock msrs
  KVM: x86: export paravirtual cpuid flags in KVM_GET_SUPPORTED_CPUID
  KVM: x86: add new KVMCLOCK cpuid feature
  KVM: x86: change msr numbers for kvmclock
  x86, paravirt: Add a global synchronization point for pvclock
  x86, paravirt: Enable pvclock flags in vcpu_time_info structure
  KVM: x86: Inject #GP with the right rip on efer writes
  KVM: SVM: Don't allow nested guest to VMMCALL into host
  KVM: x86: Fix exception reinjection forced to true
  KVM: Fix wallclock version writing race
  KVM: MMU: Don't read pdptrs with mmu spinlock held in mmu_alloc_roots
  KVM: VMX: enable VMXON check with SMX enabled (Intel TXT)
  ...

* 'modules' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: drop the lock while waiting for module to complete initialization.
  MODULE_DEVICE_TABLE(isapnp, ...) does nothing
  hisax_fcpcipnp: fix broken isapnp device table.
  isapnp: move definitions to mod_devicetable.h so file2alias can reach them.

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (32 commits)
  Move N014, N051 and CR620 dmi information to load scm dmi table
  drivers/platform/x86/eeepc-wmi.c: fix build warning
  X86 platfrom wmi: Add debug facility to dump WMI data in a readable way
  X86 platform wmi: Also log GUID string when an event happens and debug is set
  X86 platform wmi: Introduce debug param to log all WMI events
  Clean up all objects used by scm model when driver initial fail or exit
  msi-laptop: fix up some coding style issues found by checkpatch
  msi-laptop: Add i8042 filter to sync sw state with BIOS when function key pressed
  msi-laptop: Set rfkill init state when msi-laptop intiial
  msi-laptop: Add MSI CR620 notebook dmi information to scm models table
  msi-laptop: Add N014 N051 dmi information to scm models table
  drivers/platform/x86: Use kmemdup
  drivers/platform/x86: Use kzalloc
  drivers/platform/x86: Clarify the MRST IPC driver description slightly
  eeepc-wmi: depends on BACKLIGHT_CLASS_DEVICE
  IPC driver for Intel Mobile Internet Device (MID) platforms
  classmate-laptop: Add RFKILL support.
  thinkpad-acpi: document backlight level writeback at driver init
  thinkpad-acpi: clean up ACPI handles handling
  thinkpad-acpi: don't depend on led_path for led firmware type (v2)
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  DMAENGINE: extend the control command to include an arg
  async_tx: trim dma_async_tx_descriptor in 'no channel switch' case
  DMAENGINE: DMA40 fix for allocation of logical channel 0
  DMAENGINE: DMA40 support paused channel status
  dmaengine: mpc512x: Use resource_size
  DMA ENGINE: Do not reset 'private' of channel
  ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device
  ioat3: disable cacheline-unaligned transfers for raid operations
  ioat2,3: convert to producer/consumer locking
  ioat: convert to circ_buf
  DMAENGINE: Support for ST-Ericssons DMA40 block v3
  async_tx: use of kzalloc/kfree requires the include of slab.h
  dmaengine: provide helper for setting txstate
  DMAENGINE: generic channel status v2
  DMAENGINE: generic slave control v2
  dma: timb-dma: Update comment and fix compiler warning
  dma: Add timb-dma
  DMAENGINE: COH 901 318 fix bytesleft
  DMAENGINE: COH 901 318 rename confusing vars

* 'for-linus' of git://neil.brown.name/md: (45 commits)
  md: don't insist on valid event count for spare devices.
  md: simplify updating of event count to sometimes avoid updating spares.
  md/raid6: Fix raid-6 read-error correction in degraded state
  md: restore ability of spare drives to spin down.
  md: Fix read balancing in RAID1 and RAID10 on drives > 2TB
  md/linear: standardise all printk messages
  md/raid0: tidy up printk messages.
  md/raid10: tidy up printk messages.
  md/raid1: improve printk messages
  md/raid5: improve consistency of error messages.
  md: remove EXPERIMENTAL designation from RAID10
  md: allow integers to be passed to md/level
  md: notify mdstat waiters of level change
  md/raid4: permit raid0 takeover
  md/raid1: delay reads that could overtake behind-writes.
  md/raid1: fix confusing 'redirect sector' message.
  md: don't unregister the thread in mddev_suspend
  md: factor out init code for an mddev
  md: pass mddev to make_request functions rather than request_queue
  md: call md_stop_writes from md_stop
  ...

Conflicts:
	drivers/md/md.c

- Resolved conflict in md_update_sb
- Added extra 'NULL' arg to new instance of sysfs_get_dirent.
Signed-off-by: NeilBrown <neilb@suse.de>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

we can get to them from page->mapping->host, no need to mess with
file.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Don't put struct file on the stack as it takes up quite a lot of space
and violates lifetime rules for struct file.

Rather than calling afs_readpage() indirectly from the directory routines by
way of read_mapping_page(), split afs_readpage() to have afs_page_filler()
that's given a key instead of a file and call read_cache_page(), specifying the
new function directly.  Use it in afs_readpages() as well.

Also make use of this in afs_mntpt_check_symlink() too for the same reason.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>

This is a seriously simplified patch from Eric Sandeen; copy of
rationale follows:
===
  mounting stacked ecryptfs on ecryptfs has been shown to lead to bugs
  in testing.  For crypto info in xattr, there is no mechanism for handling
  this at all, and for normal file headers, we run into other trouble:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: [<ffffffffa015b0b3>] ecryptfs_d_revalidate+0x43/0xa0 [ecryptfs]
  ...

  There doesn't seem to be any good usecase for this, so I'd suggest just
  disallowing the configuration.

  Based on a patch originally, I believe, from Mike Halcrow.
===
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>