Commits · bb3d0b8bf5be61ab1d6f472c43cbf34de17e796b · nexedi / linux

26 Dec, 2019 18 commits

net_sched: sch_fq: properly set sk->sk_pacing_status · bb3d0b8b

Eric Dumazet authored Dec 23, 2019

If fq_classify() recycles a struct fq_flow because
a socket structure has been reallocated, we do not
set sk->sk_pacing_status immediately, but later if the
flow becomes detached.

This means that any flow requiring pacing (BBR, or SO_MAX_PACING_RATE)
might fallback to TCP internal pacing, which requires a per-socket
high resolution timer, and therefore more cpu cycles.

Fixes: 218af599 ("tcp: internal implementation for pacing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bb3d0b8b

Merge branch 'bnx2x-Bug-fixes' · 4e55a11a

David S. Miller authored Dec 26, 2019

Manish Chopra says:

====================
bnx2x: Bug fixes

This series has changes in the area of vlan resources
management APIs to fix fw assert issue reported in max
vlan configuration testing over the PF.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

4e55a11a

bnx2x: Fix accounting of vlan resources among the PFs · 5cdc40c7

Manish Chopra authored Dec 23, 2019

While testing max vlan configuration on the PF, firmware gets
assert as driver was configuring number of vlans more than what
is supported per port/engine, it was figured out that there is an
implicit vlan (hidden default vlan consuming hardware cam entry resource)
which is configured default for all the clients (PF/VFs) on client_init
ramrod by the adapter implicitly, so when allocating resources among the
PFs this implicit vlan should be considered or total vlan entries should
be reduced by one to accommodate that default/implicit vlan entry.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

5cdc40c7

bnx2x: Use appropriate define for vlan credit · 0444716a

Manish Chopra authored Dec 23, 2019

Although it has same value as MAX_MAC_CREDIT_E2,
use MAX_VLAN_CREDIT_E2 appropriately.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

0444716a

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · 3c2f450e

David S. Miller authored Dec 26, 2019

Daniel Borkmann says:

====================
pull-request: bpf 2019-12-23

The following pull-request contains BPF updates for your *net* tree.

We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 4 files changed, 34 insertions(+), 31 deletions(-).

The main changes are:

1) Fix libbpf build when building on a read-only filesystem with O=dir
   option, from Namhyung Kim.

2) Fix a precision tracking bug for unknown scalars, from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

3c2f450e

of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy · 7df2281a

Geert Uytterhoeven authored Dec 23, 2019

If CONFIG_OF_MDIO=n:

    drivers/net/phy/mdio_bus.c:23:
    include/linux/of_mdio.h:58:13: warning: ‘of_mdiobus_child_is_phy’ defined but not used [-Wunused-function]
     static bool of_mdiobus_child_is_phy(struct device_node *child)
		 ^~~~~~~~~~~~~~~~~~~~~~~

Fix this by adding the missing "inline" keyword.

Fixes: 0aa4d016 ("of: mdio: export of_mdiobus_child_is_phy")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

7df2281a

net: phy: aquantia: add suspend / resume ops for AQR105 · 1c93fb45

Madalin Bucur authored Dec 23, 2019

The suspend/resume code for AQR107 works on AQR105 too.
This patch fixes issues with the partner not seeing the link down
when the interface using AQR105 is brought down.

Fixes: bee8259d ("net: phy: add driver for aquantia phy")
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1c93fb45

dpaa_eth: fix DMA mapping leak · c27569fc

Madalin Bucur authored Dec 23, 2019

On the error path some fragments remain DMA mapped. Adding a fix
that unmaps all the fragments. Rework cleanup path to be simpler.

Fixes: 8151ee88 ("dpaa_eth: use page backed rx buffers")
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

c27569fc

Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · ec34c015

David S. Miller authored Dec 26, 2019

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix endianness issue in flowtable TCP flags dissector,
   from Arnd Bergmann.

2) Extend flowtable test script with dnat rules, from Florian Westphal.

3) Reject padding in ebtables user entries and validate computed user
   offset, reported by syzbot, from Florian Westphal.

4) Fix endianness in nft_tproxy, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

ec34c015

net/mlxfw: Fix out-of-memory error in mfa2 flash burning · a5bcd72e

Vladyslav Tarasiuk authored Dec 26, 2019

The burning process requires to perform internal allocations of large
chunks of memory. This memory doesn't need to be contiguous and can be
safely allocated by vzalloc() instead of kzalloc(). This patch changes
such allocation to avoid possible out-of-memory failure.

Fixes: 410ed13c ("Add the mlxfw module for Mellanox firmware flash process")
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

a5bcd72e

Merge branch 'hsr-fix-several-bugs-in-hsr-module' · 095e90e0

David S. Miller authored Dec 25, 2019

Taehee Yoo says:

====================
hsr: fix several bugs in hsr module

1. The first patch fixes debugfs warning when it's opened when hsr module
is being removed. debugfs file is opened, it tries to hold .owner module,
but it would print warning messages if it couldn't hold .owner module.
In order to avoid the warning message, this patch makes hsr module does
not set .owner. Unsetting .owner is safe because these are protected by
inode_lock().

2. The second patch fixes wrong error handling of hsr_dev_finalize()
a) hsr_dev_finalize() calls debugfs_create_{dir/file} to create debugfs.
it checks NULL pointer but debugfs don't return NULL so it's wrong code.
b) hsr_dev_finalize() calls register_netdevice(). so if it fails after
register_netdevice(), it should call unregister_netdevice().
But it doesn't.
c) debugfs doesn't affect any actual logic of hsr module.
So, the failure of creating of debugfs could be ignored.

3. The third patch adds hsr root debugfs directory.
When hsr interface is created, it creates debugfs directory in
/sys/kernel/debug/<interface name>.
It's a little bit faulty path because if an interface is the same with
another directory name in the same path, it will fail. If hsr root
directory is existing, the possibility of failure of creating debugfs
file will be reduced.

4. The fourth patch adds debugfs rename routine.
debugfs directory name is the same with hsr interface name.
So hsr interface name is changed, debugfs directory name should be
changed too.

5. The fifth patch fixes a race condition in node list add and del.
hsr nodes are protected by RCU and there is no write side lock.
But node insertions and deletions could be being operated concurrently.
So write side locking is needed.

6. The Sixth patch resets network header
Tap routine is enabled, below message will be printed.

[  175.852292][    C3] protocol 88fb is buggy, dev veth0

hsr module doesn't set network header for supervision frame.
But tap routine validates network header.
If network header wasn't set, it resets and warns about it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

095e90e0