- 11 Jul, 2009 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits) drm/i915: Fix for LVDS VBT change on IGDNG drm/i915: Zap the GTT mapping when transitioning from untiled to tiled. drm/i915: Refactor calls to unmap_mapping_range drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode drm: Disable the unused connectors explicitly when resuming with KMS. drm/i915: Restore the KMS modeset for every activated CRTC drm/i915: Fix harmless warning from patch merged after i2c rework. drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture. drm/i915: Check the LID device to decide whether the LVDS should be initialized drm/i915: Move lock to more reasonable location drm/i915: Add gtt_offset to gem object list debugfs output drm/i915: Remove gtt_bound from drm_i915_gem_object drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF. drm/i915: crt fetch EDID by DVI-I converter on G4x platform drm/i915: Don't update display FIFO watermark on IGDNG drm/i915: Adjust DisplayPort clocks to use 96MHz reference drm/i915: Make driver less chatty drm/i915: fix up a raw 64bit divide drm/i915: enable sdvo lvds scaling function. drm/i915: Set SSC frequency for 8xx chips correctly ...
-
Amerigo Wang authored
exception.txt only explains the code on x86, so it's better to move it into Documentation/x86 directory. And also rename it to exception-tables.txt which looks much more reasonable. This patch is on top of the previous one. Signed-off-by:
WANG Cong <amwang@redhat.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Amerigo Wang authored
Update Documentation/exception.txt. Remove trailing whitespaces in it. Signed-off-by:
-
Larry Finger authored
When building v2.6.31-rc2-344-g69ca06c9, the following build errors are found due to missing includes: CC [M] fs/fuse/dev.o fs/fuse/dev.c: In function ‘request_end’: fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function) ... fs/nfs/write.c: In function ‘nfs_set_page_writeback’: fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function) Signed-off-by: Larry Finger@lwfinger.net> Signed-off-by:
-
- 10 Jul, 2009 32 commits
-
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: reset oom_cfqq in cfq_set_request() block: fix sg SG_DXFER_TO_FROM_DEV regression block: call blk_scsi_ioctl_init() Fix congestion_wait() sync/async vs read/write confusion
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix disorder in cp count on error during deleting checkpoints nilfs2: fix lockdep warning between regular file and inode file nilfs2: fix incorrect KERN_CRIT messages in case of write failures nilfs2: fix hang problem of log writer which occurs after write failures nilfs2: remove unlikely directive causing mis-conversion of error code
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: dma-debug: Fix the overlap() function to be correct and readable oprofile: reset bt_lost_no_mapping with other stats x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon signals: declare sys_rt_tgsigqueueinfo in syscalls.h rcu: Mark Hierarchical RCU no longer experimental dma-debug: Put all hash-chain locks into the same lock class dma-debug: fix off-by-one error in overlap function
-
Linus Torvalds authored
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits) perf report: Add "Fractal" mode output - support callchains with relative overhead rate perf_counter tools: callchains: Manage the cumul hits on the fly perf report: Change default callchain parameters perf report: Use a modifiable string for default callchain options perf report: Warn on callchain output request from non-callchain file x86: atomic64: Inline atomic64_read() again x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative() x86: atomic64: Improve atomic64_xchg() x86: atomic64: Export APIs to modules x86: atomic64: Improve atomic64_read() x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP x86: atomic64: Fix unclean type use in atomic64_xchg() x86: atomic64: Make atomic_read() type-safe x86: atomic64: Reduce size of functions x86: atomic64: Improve atomic64_add_return() x86: atomic64: Improve cmpxchg8b() x86: atomic64: Improve atomic64_read() x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too perf report: Annotate variable initialization ...
-
Peter Zijlstra authored
Optimize cond_resched() by removing one conditional. Currently cond_resched() checks system_state == SYSTEM_RUNNING in order to avoid scheduling before the scheduler is running. We can however, as per suggestion of Matt, use PREEMPT_ACTIVE to accomplish that very same. Suggested-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
-
Peter Zijlstra authored
Pull the initial preempt_count value into a single definition site. Maintainers for: alpha, ia64 and m68k, please have a look, your arch code is funny. The header magic is a bit odd, but similar to the KERNEL_DS one, CPP waits with expanding these macros until the INIT_THREAD_INFO macro itself is expanded, which is in arch/*/kernel/init_task.c where we've already included sched.h so we're good. Cc: tony.luck@intel.com Cc: rth@twiddle.net Cc: geert@linux-m68k.org Signed-off-by:
-
Zhenyu Wang authored
IGDNG mobile chip's LVDS data block removes panel fitting register definition. So this fixes offset for LVDS timing block parsing. Thanks for Michael Fu to catch this. Signed-off-by:
Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by:
Eric Anholt <eric@anholt.net>
-
Eric Anholt authored
As of 52dc7d32, we could leave an old linear GTT mapping in place, so that apps trying to GTT-mapped write in tiled data wouldn't get the fence added, and garbage would get displayed. Signed-off-by:
-
Chris Wilson authored
As we call unmap_mapping_range() twice in identical fashion, refactor and attempt to explain why we need to call unmap_mapping_range(). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ingo Molnar authored
Linus noticed how unclean and buggy the overlap() function is: - It uses convoluted (and bug-causing) positive checks for range overlap - instead of using a more natural negative check. - Even the positive checks are buggy: a positive intersection check has four natural cases while we checked only for three, missing the (addr < start && addr2 == end) case for example. - The variables are mis-named, making it non-obvious how the check was done. - It needlessly uses u64 instead of unsigned long. Since these are kernel memory pointers and we explicitly exclude highmem ranges anyway we cannot ever overflow 32 bits, even if we could. (and on 64-bit it doesnt matter anyway) All in one, this function needs a total revamp. I used Linus's suggestions minus the paranoid checks (we cannot overflow really because if we get totally bad DMA ranges passed far more things break in the systems than just DMA debugging). I also fixed a few other small details i noticed. Reported-by:
Ingo Molnar <mingo@elte.hu>
-
Zhao Yakui authored
In KMS mode we now use the normal mode-setting paths to set the modes back to the current configuration, so we don't need to also run the more limited non-KMS implementation of modesetting for resume. Signed-off-by:
Zhao Yakui <yakui.zhao@intel.com> Acked-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Zhao Yakui authored
Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Zhao Yakui authored
Restore the modeset for every activated CRTC in course of resume. This is realized by calling the function of drm_helper_resume_force_mode. Note: it is meaningful only for the KMS mode. https://bugs.freedesktop.org/show_bug.cgi?id=21719 https://bugs.freedesktop.org/show_bug.cgi?id=21708 https://bugs.freedesktop.org/show_bug.cgi?id=22285 https://bugs.freedesktop.org/show_bug.cgi?id=22263Signed-off-by:
-
Eric Anholt authored
Signed-off-by: -
Eric Anholt authored
This is seen on some G41 systems, where the BIOS will consume all but a few KB of the aperture. This should be bad for all operating systems, as it means that the OS can't dynamically manage memory between graphics and the rest of the system, and OSes that did static memory management statically add memory in addition to the BIOS allocation anyway. So, instead of working around it, just fail out verbosely. fd.o bug #21574 Signed-off-by:
Ian Romanick <ian.d.romanick@intel.com>
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Fix trace_print_seq() kprobes: No need to unlock kprobe_insn_mutex tracing/fastboot: Document the need of initcall_debug trace_export: Repair missed fields tracing: Fix stack tracer sysctl handling
-
Vivek Goyal authored
In case memory is scarce, we now default to oom_cfqq. Once memory is available again, we should allocate a new cfqq and stop using oom_cfqq for a particular io context. Once a new request comes in, check if we are using oom_cfqq, and if yes, try to allocate a new cfqq. Tested the patch by forcing the use of oom_cfqq and upon next request thread realized that it was using oom_cfqq and it allocated a new cfqq. Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com>
-
FUJITA Tomonori authored
I overlooked SG_DXFER_TO_FROM_DEV support when I converted sg to use the block layer mapping API (2.6.28). Douglas Gilbert explained SG_DXFER_TO_FROM_DEV: http://www.spinics.net/lists/linux-scsi/msg37135.html = The semantics of SG_DXFER_TO_FROM_DEV were: - copy user space buffer to kernel (LLD) buffer - do SCSI command which is assumed to be of the DATA_IN (data from device) variety. This would overwrite some or all of the kernel buffer - copy kernel (LLD) buffer back to the user space. The idea was to detect short reads by filling the original user space buffer with some marker bytes ("0xec" it would seem in this report). The "resid" value is a better way of detecting short reads but that was only added this century and requires co-operation from the LLD. = This patch changes the block layer mapping API to support this semantics. This simply adds another field to struct rq_map_data and enables __bio_copy_iov() to copy data from user space even with READ requests. It's better to add the flags field and kills null_mapped and the new from_user fields in struct rq_map_data but that approach makes it difficult to send this patch to stable trees because st and osst drivers use struct rq_map_data (they were converted to use the block layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer mapping API. zhou sf reported this regiression and tested this patch: http://www.spinics.net/lists/linux-scsi/msg37128.html http://www.spinics.net/lists/linux-scsi/msg37168.htmlReported-by:
zhou sf <sxzzsf@gmail.com> Tested-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
FUJITA Tomonori authored
Currently, blk_scsi_ioctl_init() is not called since it lacks an initcall marking. This causes the command table to be unitialized, hence somce commands are block when they should not have been. This fixes a regression introduced by commit 018e0446Signed-off-by:
-
Jens Axboe authored
Commit 1faa16d2 accidentally broke the bdi congestion wait queue logic, causing us to wait on congestion for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead. Signed-off-by:
-
Maynard Johnson authored
The bt_lost_no_mapping is not getting reset at the start of a profiling run, thus the oprofiled.log shows erroneous values for this statistic. The attached patch fixes this problem. Signed-off-by:
Maynard Johnson <maynardj@us.ibm.com> Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] w83627hf_wdt.c: add support for the W83627EHF support [WATCHDOG] SA1100 watchdog maximum timeout [WATCHDOG] w83697ug, fix lock imbalance [WATCHDOG] drivers/watchdog/bcm47xx_wdt.c: Remove unnecessary semicolons
-
Krzysztof Helt authored
Remove call to the mx3fb_set_par() and the mx3fb_blank() before the register_framebuffer(). This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Krzysztof Helt authored
Remove call to the fb_set_par() before the register_framebuffer(). This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: when ATTR_READONLY is set, only clear write bits on non-directories cifs: remove cifsInodeInfo->inUse counter cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget [CIFS] update cifs version number cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls cifs: make a separate function for filling out FILE_UNIX_BASIC_INFO cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo cifs: add pid of initiating process to spnego upcall info cifs: fix regression with O_EXCL creates and optimize away lookup cifs: add new cifs_iget function and convert unix codepath to use it
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) cxgb3: Fix crash caused by stashing wrong netdev_queue ixgbe: Fix coexistence of FCoE and Flow Director in 82599 memory barrier: adding smp_mb__after_lock net: adding memory barrier to the poll and receive callbacks netpoll: Fix carrier detection for drivers that are using phylib includecheck fix: include/linux, rfkill.h p54: tx refused but queue active Atheros Kconfig needs to be dependent on WLAN_80211 mac80211: fix docbook mac80211_hwsim: avoid NULL access ssb: Add support for 4318E b43: Add support for 4318E zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device zd1211rw: 07b8:6001 is a ZD1211B r6040: bump driver version to 0.24 and date to 08 July 2009 r6040: restore MIER register correctly when IRQ line is shared ipv4: Fix fib_trie rebalancing, part 4 (root thresholds) davinci_emac: fix kernel oops when changing MAC address while interface is down igb: set lan id prior to configuring phy mac80211: minstrel: avoid accessing negative indices in rix_to_ndx() ...
-
Dave Jones authored
Looks like the change in ad361c98 wasn't compile tested. Signed-off-by:
Dave Jones <davej@redhat.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Robert Richter authored
The short name of the achitecture is 'arch_perfmon'. This patch changes the kernel parameter to use this name. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Roland Dreier authored
Commit c3a8c5b6 ("cxgb3: move away from LLTX") exposed a bug in how cxgb3 looks up the netdev_queue it stashes away in a qset during initialization. For multiport devices, the TX queue index it uses is offset by the first_qset index of each port. This leads to a crash once LLTX is removed, since hard_start_xmit is called with one TX queue lock held, while the TX reclaim timer task grabs a different (wrong) TX queue lock when it frees skbs. Fix this by removing the first_qset offset used to look up the TX queue passed into t3_sge_alloc_qset() from setup_sge_qsets(). Signed-off-by:
Roland Dreier <rolandd@cisco.com> Acked-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Yi Zou authored
Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR) in 82599 and remove the disabling of FDIR when FCoE is enabled. Currently, FDIR is turned off when FCoE is enabled under the assumption that FCoE is always enabled with DCB being turned on. However, FDIR does not have to be turned off all the time when FCoE is enabled since FCoE can be enabled without DCB being turned on, e.g., use link pause only. This patch makes sure that when DCB is turned on or off, FDIR is turned on or off correspondingly; and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR set up properly so FCoE and FDIR can coexist regardless of DCB being on or off. Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jiri Olsa authored
Adding smp_mb__after_lock define to be used as a smp_mb call after a lock. Making it nop for x86, since {read|write|spin}_lock() on x86 are full memory barriers. Signed-off-by:Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Jiri Olsa authored
Adding memory barrier after the poll_wait function, paired with receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper to wrap the memory barrier. Without the memory barrier, following race can happen. The race fires, when following code paths meet, and the tp->rcv_nxt and __add_wait_queue updates stay in CPU caches. CPU1 CPU2 sys_select receive packet ... ... __add_wait_queue update tp->rcv_nxt ... ... tp->rcv_nxt check sock_def_readable ... { schedule ... if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible(sk->sk_sleep) ... } If there was no cache the code would work ok, since the wait_queue and rcv_nxt are opposit to each other. Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already passed the tp->rcv_nxt check and sleeps, or will get the new value for tp->rcv_nxt and will return with new data mask. In both cases the process (CPU1) is being added to the wait queue, so the waitqueue_active (CPU2) call cannot miss and will wake up CPU1. The bad case is when the __add_wait_queue changes done by CPU1 stay in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1 will then endup calling schedule and sleep forever if there are no more data on the socket. Calls to poll_wait in following modules were ommited: net/bluetooth/af_bluetooth.c net/irda/af_irda.c net/irda/irnet/irnet_ppp.c net/mac80211/rc80211_pid_debugfs.c net/phonet/socket.c net/rds/af_rds.c net/rfkill/core.c net/sunrpc/cache.c net/sunrpc/rpc_pipe.c net/tipc/socket.c Signed-off-by:
-
- 09 Jul, 2009 4 commits
-
-
Jeff Layton authored
cifs: when ATTR_READONLY is set, only clear write bits on non-directories On windows servers, ATTR_READONLY apparently either has no meaning or serves as some sort of queue to certain applications for unrelated behavior. This MS kbase article has details: http://support.microsoft.com/kb/326549/ Don't clear the write bits directory mode when ATTR_READONLY is set. Reported-by: pouchat@peewiki.net Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com>
-
Jeff Layton authored
cifs: remove cifsInodeInfo->inUse counter It was purported to be a refcounter of some sort, but was never used that way. It never served any purpose that wasn't served equally well by the I_NEW flag. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jeff Layton authored
cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget Rather than allocating an inode and filling it out, have cifs_get_inode_info fill out a cifs_fattr and call cifs_iget. This means a pretty hefty reorganization of cifs_get_inode_info. For the readdir codepath, add a couple of new functions for filling out cifs_fattr's from different FindFile response infolevels. Finally, remove cifs_new_inode since there are no more callers. Signed-off-by:
-
Zhao Yakui authored
On some boxes the mobile chipset is used and there is no LVDS device. In such case we had better not initialize the LVDS output device so that one pipe can be used for other output device. For example: E-TOP. But unfortunately the LVDS device is still initialized on the boxes based on mobile chipset in KMS mode. It brings that this pipe occupied by LVDS can't be used for other output device. After checking the acpidump we find that there is no LID device on such boxes. In such case we can use the LID device to decide whether the LVDS device should be initialized. If there is no LID device, we can think that there is no LVDS device. It is unnecessary to initialize the LVDS output device. If there exists the LID device, it will continue the current flowchart. Maybe on some boxes there is no LVDS device but the LID device is found. In such case it should be added to the quirk list. http://bugs.freedesktop.org/show_bug.cgi?id=21496 http://bugs.freedesktop.org/show_bug.cgi?id=21856 http://bugs.freedesktop.org/show_bug.cgi?id=21127Signed-off-by:
-
