- 19 Jun, 2013 7 commits
-
-
Gianluca Gennari authored
The r820t_imr() calibration function of the Rafael Micro R820T tuner generates this error at every tune attempt: r820t 0-001a: No valid PLL values for 2252021 kHz! The function was inspired by the original Realtek driver for rtl2832 devices with the r820t tuner; anyway, in the original code the XTAL frequency of the tuner was expressed in KHz, while in the kernel driver it is expressed in Hz; so the calibration failed because of an out-of-range initial value. The final result of the computation is then passed to the r820t_set_mux() and r820t_set_pll() functions, but the conversion from KHz to Hz is already correctly implemented. Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Gianluca Gennari authored
The memcpy in shadow_store() could exceed buffer limits when r > 0. Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Gianluca Gennari authored
fe->tuner_priv and fe->ops.tuner_ops are initialized twice in r820t_attach(). Remove the redundant initializations and also move fe->ops.tuner_ops initialization outside of the mutex lock (as in the xc4000 tuner code for example). Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Remove all links of the subdev's media entity after internal_ops 'unregistered' call and right before unregistering the entity from a media device. It is assumed here that an unregistered (orphan) media entity cannot have links to other entities registered to a media device. It is also assumed the media links should be created/removed with the media graph's mutex held. The above implies that the caller of v4l2_device_unregister_subdev() must not hold the graph's mutex. Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
This function allows to remove all media entity's links to other entities, leaving no references to a media entity's links array at its remote entities. Currently, when a driver of some entity is removed it will free its media entities links[] array, leaving dangling pointers at other entities that are part of same media graph. This is troublesome when drivers of a media device entities are in separate kernel modules, removing only some modules will leave others in an incorrect state. This function is intended to be used when an entity is being unregistered from a media device. With an assumption that normally the media links should be created between media entities registered to a media device, with the graph mutex held. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sakari Ailus authored
media_entity_cleanup() frees the links array which will be accessed by media_entity_remove_links() called by v4l2_device_unregister_subdev(). Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sakari Ailus authored
media_entity_cleanup() frees the links array which will be accessed by media_entity_remove_links() called by v4l2_device_unregister_subdev(). Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 17 Jun, 2013 33 commits
-
-
Alexey Khoroshilov authored
Error handling of usb_submit_urb() is not as all others in imon_probe(). It just unlocks mutexes and returns nonzero leaving all already allocated resources unfreed. The patch makes sure all the resources are deallocated. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Thomas Meyer authored
Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
As USB/PCI/MEDIA_SUPPORT dependencies can be tristate, we can't simply make the bool menu to be dependent on it. Everything below the menu should also depend on it, otherwise, we risk to allow building them with 'y', while only 'm' would be supported. So, add an IF just before everything below, in order to avoid such risks. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Laurent Pinchart authored
The sensor is powered by three supplies. Use the bulk regulator API to enable and disable them instead of performing the operations manually. This fixes a warning caused by ignoring the return value of regulator_enable(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Lad, Prabhakar authored
Add OF support for the mt9p031 sensor driver. Alongside this patch sorts the header inclusion alphabetically. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
drivers/media/i2c/ths8200.c: In function ‘ths8200_g_register’: drivers/media/i2c/ths8200.c:121:21: warning: unused variable ‘client’ [-Wunused-variable] drivers/media/i2c/ths8200.c: In function ‘ths8200_s_register’: drivers/media/i2c/ths8200.c:132:21: warning: unused variable ‘client’ [-Wunused-variable] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Fix uninitialized fields and a missing TRY_FMT implementation in saa6752hs. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
- map overlay format values to the supported ranges - set colorspace - zero priv field - fix cliplist handling - fix field handling - initialize ovbuf values Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
This is a global field, not a per-filehandle field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
These fields are global, not per-filehandle. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
This is global data, not per-filehandle data. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
This information is already available in vfl_type in video_device. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Ismael Luceno authored
This cleans up the saa712x setup code and there are no functional changes. Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net> [hans.verkuil@cisco.com: add clarification that this is cleanup only] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The full datasheets are available from TI website:- http://www.ti.com/product/ths8200 Note: This patch adds support only for progressive format as of now. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com> Signed-off-by: Martin Bugge <martin.bugge@cisco.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
- do exact matching for special formats like PAL-M - drop autodetect support: it's non-standard, and it is bogus as well since there is no way to get back the detected standard since neither g_std nor querystd are implemented. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Explicitly mention that this ioctl should return V4L2_STD_UNKNOWN if not signal was detected. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Improve the querystd comment. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Currently, if the norm set is V4L2_STD_ALL, then autodetect the current standard and use that. This is non-standard behavior, and in fact it hasn't worked for a very long time: before s_std is called in this driver, the v4l2 core will mask it with the tvnorms field. So even if the application passes V4L2_STD_ALL, the zoran driver will always see a subset of that. Since nobody ever complained about this we just remove this non-standard functionality. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
If no signal is detected, return V4L2_STD_UNKNOWN. Otherwise AND the standard with the detected standards. Note that the v4l2 core initializes the std with tvnorms before calling the querystd ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-