- 10 Mar, 2014 4 commits
-
-
Ville Syrjälä authored
Currently we allow encoders to indicate whether they can be part of a cloned set with just one flag. That's not flexible enough to describe the actual hardware capabilities. Instead make it a bitmask of encoder types with which the current encoder can be cloned. For now we set the bitmask to allow DVO+DVO and DVO+VGA, which should match what the old boolean flag allowed. We will add some more cloning options in the future. Note that this patch also removes the encoder.possible_clones setting from encoder setup code - we compute this dynamically. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> [danvet: Add Ville's explanation why removing the encoder possible_clones is save.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
When adding new gunk, _always_ think of a good place. Start/end usually just means that this didn't happen, and on top of that results in needless conflicts with other patches doing the same. Introduced in commit 62d5d69b Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Feb 25 17:11:28 2014 +0200 drm/i915: Add suspend count to error state Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
The stolen allocator objects loudly if the caller requests a zero-sized object. This is a useful verbose check as in most cases the request should have been pruned much early. Here we just want to silently return before attempting the allocation. Regression from commit 484b41dd Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Mar 7 08:57:55 2014 -0800 drm/i915: remove early fb allocation dependency on CONFIG_FB v2 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75963Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
During KMS takeover, we try to capture the current configuration and preserve it across our initialisation. For a variety of reasons, we may fail this, for example if the current mode was using the legacy VGA plane. Under such circumstances, we discard the fb in the plane config and tried to find a matching fb on another CRTC. This obviously also failed, leaving the plane config fb dangling, pointing to the freed block. Regression from commit 484b41dd Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Mar 7 08:57:55 2014 -0800 drm/i915: remove early fb allocation dependency on CONFIG_FB v2 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75963Signed-off-by:
-
- 08 Mar, 2014 5 commits
-
-
Jesse Barnes authored
By stuffing the fb allocation into the crtc, we get mode set lifetime refcounting for free, but have to handle the initial pin & fence slightly differently. It also means we can move the shared fb handling into the core rather than leaving it out in the fbdev code. v2: null out crtc->fb on error (Daniel) take fbdev fb ref and remove unused error path (Daniel) Requested-by:Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Jesse Barnes authored
Retrieve current framebuffer config info from the regs and create an fb object for the buffer the BIOS or boot loader left us. This should allow for smooth transitions to userspace apps once we finish the initial configuration construction. v2: check for non-native modes and adjust (Jesse) fixup aperture and cmap frees (Imre) use unlocked unref if init_bios fails (Jesse) fix curly brace around DSPADDR check (Imre) comment failure path for pin_and_fence (Imre) v3: fixup fixup of aperture frees (Chris) v4: update to current bits (locking & pin_and_fence hack) (Jesse) v5: move fb config fetch to display code (Jesse) re-order hw state readout on initial load to suit fb inherit (Jesse) re-add pin_and_fence in fbdev code to make sure we refcount properly (Je v6: rename to plane_config (Daniel) check for valid object when initializing BIOS fb (Jesse) split from plane_config readout and other display changes (Jesse) drop use_bios_fb option (Chris) update comments (Jesse) rework fbdev_init_bios for clarity (Jesse) drop fb obj ref under lock (Chris) v7: use fb object from plane_config instead (Ville) take ref on fb object (Jesse) v8: put under i915_fastboot option (Jesse) fix fb ptr checking (Jesse) inform drm_fb_helper if we fail to enable a connector (Jesse) drop unnecessary enabled[] modifications in failure cases (Chris) split from BIOS connector config readout (Daniel) don't memset the fb buffer if preallocated (Chris) alloc ifbdev up front and pass to init_bios (Chris) check for bad ifbdev in restore_mode too (Chris) v9: fix up !fastboot bpp setting (Jesse) fix up !fastboot helper alloc (Jesse) make sure BIOS fb is sufficient for biggest active pipe (Jesse) v10:fix up size calculation for proposed fbs (Chris) go back to two pass pipe fb assignment (Chris) add warning for active pipes w/o fbs (Chris) clean up num_pipes checks in fbdev_init and fbdev_restore_mode (Chris) move i915.fastboot into fbdev_init (Chris) v11:make BIOS connector config usage unconditional (Daniel) v12:fix up fb vs pipe size checking (Chris) Signed-off-by: -
Jesse Barnes authored
This should allow BIOS fb inheritance to work on ILK+ machines too. v2: handle tiled BIOS fbs (Kristian) split out common bits (Jesse) v3: alloc fb obj out in _init Signed-off-by: -
Jesse Barnes authored
Read out the current plane configuration at init time into a new plane_config structure. This allows us to track any existing framebuffers attached to the plane and potentially re-use them in our fbdev code for a smooth handoff. v2: update for new pitch_for_width function (Jesse) comment how get_plane_config works with shared fbs (Jesse) v3: s/ARGB/XRGB (Ville) use pipesrc width/height (Ville) fix fourcc comment (Bob) use drm_format_plane_cpp (Ville) v4: use fb for tracking fb data object (Ville) v5: fix up gen2 pitch limits (Ville) v6: read out stride as well (Daniel) v7: split out init ordering changes (Daniel) don't fetch config if !CONFIG_FB v8: use proper height in get_plane_config (Chris) v9: fix CONFIG_FB check for modular configs (Jani) v10: add comment about stolen allocation stomping v11: drop hw state readout hunk (Daniel) v12: handle tiled BIOS fbs (Kristian) pull out common bits (Jesse) v13: move fb obj alloc out to _init Signed-off-by: -
Jesse Barnes authored
Early at init time, we can try to read out the plane config structure and try to preserve it if possible. v2: alloc fb obj at init time after fetching plane config Signed-off-by:
-
- 07 Mar, 2014 24 commits
-
-
Chris Wilson authored
We don't always want to write into main memory with pwrite. The shmem fast path in particular is used for memory that is cacheable - under such circumstances forcing the cache eviction is undesirable. As we will always flush the cache when targeting incoherent buffers, we can rely on that second pass to apply the cache coherency rules and so benefit from in-cache copies otherwise. Signed-off-by:
Brad Volkin <bradley.d.volkin@intel.com> Signed-off-by:
-
Chris Wilson authored
We used to lock individual pages inside the buffer object and so needed to update the page flags every time. However, we now pin the pages into the object for the duration of the pwrite/pread (and hopefully much longer) and so we can forgo the flag updates until we release all the pages. Signed-off-by:
-
Daniel Vetter authored
Chris suggested to split things up a bit into the different parts of the driver and also sort it all correctly, with the hope that we're trying to organize things a bit better eventually. It should also help newcomers to orient themselves a bit better. v2: - Move intel_pm.c to the core - to make things perfect we should split out the modeset related pm features (psr/fbc) into a separate file. Maybe something Rodrigo can do once the PSR patches have settled. - Split the modesetting sections into core and encoders/outputs. intel_ddi.c is a bit funky since it has core hsw+ support and ddi output support. Whatever. v3: Failed to git add ... v4: Really go ocd, i.e. spelling fix in a comment from Jani. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Brad Volkin authored
The command parser scans batch buffers submitted via execbuffer ioctls before the driver submits them to hardware. At a high level, it looks for several things: 1) Commands which are explicitly defined as privileged or which should only be used by the kernel driver. The parser generally rejects such commands, with the provision that it may allow some from the drm master process. 2) Commands which access registers. To support correct/enhanced userspace functionality, particularly certain OpenGL extensions, the parser provides a whitelist of registers which userspace may safely access (for both normal and drm master processes). 3) Commands which access privileged memory (i.e. GGTT, HWS page, etc). The parser always rejects such commands. See the overview comment in the source for more details. This patch only implements the logic. Subsequent patches will build the tables that drive the parser. v2: Don't set the secure bit if the parser succeeds Fail harder during init Makefile cleanup Kerneldoc cleanup Clarify module param description Convert ints to bools in a few places Move client/subclient defs to i915_reg.h Remove the bits_count field OTC-Tracker: AXIA-4631 Change-Id: I50b98c71c6655893291c78a2d1b8954577b37a30 Signed-off-by:
Jani Nikula <jani.nikula@intel.com> [danvet: Appease checkpatch.] Signed-off-by:
-
Brad Volkin authored
The command parser is going to need the same synchronization and setup logic, so factor it out for reuse. v2: Add a check that the object is backed by shmem Signed-off-by:
-
Ville Syrjälä authored
Make sure the line_time_us isn't zero in the gmch watermarks code as that would cause a div by zero. This can be triggered by specifying a very fast pixel clock for the mode. At some point we should probably just switch over to using the same math we use on PCH platforms which avoids such intermediate rounded results. Also we should verify the user provided mode much more rigorously. At the moment we accept pretty much anything. Note that "very fast mode" here means above 74.25 GHz. Signed-off-by:
-
Imre Deak authored
Based on an early draft from Jesse. Add support for powering on/off the dynamic power wells on VLV by registering its display and dpio dynamic power wells with the power domain framework. For now power on all PHY TX lanes regardless of the actual lane configuration. Later this can be optimized when the PHY side setup enables only the required lanes. Atm, it enables all lanes in all cases. v2: - undef function local COND macro after its last use (Ville) - Take dev_priv->irq_lock around the whole sequence of intel_set_cpu_fifo_underrun_reporting_nolock() and valleyview_disable_display_irqs(). They are short and releasing the lock in between only makes proving correctness more difficult. - sanitize local var names in vlv_power_well_enabled() v3: - rebase on latest -nightly Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
Needed by the next patch, wanting to set the underrun reporting as part of a bigger dev_priv->irq_lock'ed sequence. Signed-off-by:
-
Imre Deak authored
We'll need to disable/re-enable the display-side IRQs when turning off/on the VLV display power well. Factor out the helper functions for this. For now keep the display IRQs enabled by default, so the functionality doesn't change. This will be changed to enable/disable the IRQs on-demand when adding support for VLV power wells in an upcoming patch. v2: - take the irq spin lock for the whole enable/disable sequence as these can be called with interrupts enabled Signed-off-by:
-
Imre Deak authored
Suggested by Daniel. v2: - sanitize the state checking condition, the original was rather confusing (partly due to the unfortunate naming of i915.disable_power_well) (Ville) - simpler message+backtrace generation by using WARN instead of WARN_ON (Ville) - check if always-on power wells are truly on all the time Signed-off-by:
-
Imre Deak authored
We need to do the same for other platforms in upcoming patches. v2: - s/p/pipe (Ville) - Call the new helper with the vbl_lock already held. The part it protects is short, so releasing it between pipes only makes proving correctness more difficult. Signed-off-by:
-
Imre Deak authored
In the upcoming patches we'll need to access the rest of the fields in the punit power gating register, so prepare for that. v2: - add doc reference for the power well subsystem IDs (Jesse) - remove IDs for non-existant DPIO_RX[23] subsystems (Jesse) Signed-off-by:
-
Imre Deak authored
This is a left-over from commit b7e634cc Author: Imre Deak <imre.deak@intel.com> Date: Tue Feb 4 21:35:45 2014 +0200 drm/i915: vlv: don't unmask IIR[DISPLAY_PIPE_A/B_VBLANK] interrupt where we stopped unmasking the vblank IRQs, but left them enabled in the IER register. Disable them in IER too. v2: - remove comment becoming stale after this change (Ville) Signed-off-by:
-
Imre Deak authored
We can read out the pipe HW state only if the required power domain is on. If not we consider the pipe to be off. v2: - no change v3: - push down the power domain checks into the specific crtc get_pipe_config handlers (Daniel) Signed-off-by:
-
Imre Deak authored
Since the encoder is tied to its port, we need to make sure the power domain for that port is on before reading out the encoder HW state. Note that this also covers also all connector get_hw_state handlers, since all those just call the corresponding encoder get_hw_state handler, which checks - after this change - for all power domains the connector needs. v2: - no change v3: - push down the power domain checks into the specific encoder get_hw_state handlers (Daniel) Signed-off-by:
-
Imre Deak authored
The connector detect and get_mode handlers need to access the port specific HW blocks to read the EDID etc. Get/put the port power domains around these handlers. v2: - get port power domain for HDMI too (Ville) - get port power domain for the DP,HDMI audio detect handlers (Jesse) - Leave the intel_runtime_pm_get/put in the DP detect function in place. Instead of just removing them, these should be moved to the appropriate power_well enable/disable handlers. We can do this after Paulo's 'Merge PC8 with runtime PM, v2' patchset. v3: - rebased on latest -nightly Signed-off-by:
-
Imre Deak authored
Parts that poke port specific HW blocks like the encoder HW state readout or connector hotplug detect code need a way to check whether required power domains are on or enable/disable these. For this purpose add a set of power domains that refer to the port HW blocks. Get the proper port power domains during modeset. For now when requesting the power domain for a DDI port get it for a 4 lane configuration. This can be optimized later to request only the 2 lane power domain, when proper support is added on the VLV PHY side for this. Atm, the PHY setup code assumes a 4 lane config in all cases. Signed-off-by:
-
Imre Deak authored
Reading code free of special cases wins over the small overhead of calling a noop handler. Suggested by Jesse. Signed-off-by:
-
Imre Deak authored
Split the 'set' power well handler into an 'enable', 'disable' and 'sync_hw' handler. This maps more conveniently to higher level operations, for example it allows us to push the hsw package c8 handling into the corresponding hsw/bdw enable/disable handlers and the hsw BIOS hand-over setting into the hsw/bdw sync_hw handler. No functional change. Signed-off-by:
-
Imre Deak authored
Whenever we request a power domain it has to guarantee that all HW resources are enabled that are needed to access a HW register associated with that power domain. In case a register is on an always-on power well this won't result in turning on a power well, but it may require enabling some other HW resource. One such resource is the HSW/BDW device D0 state that is required for all register accesses and thus for all power wells/power domains. So far the init power domain (guaranteeing access to all HW registers) was part of the default i9xx always-on power well, but not the HSW/BDW always-on power wells. Add the domain to the latter power wells too. Atm, all the always-on power wells have noop handlers, so this doesn't change the functionality. v2: - clarify semantics of always-on power wells (Paulo) Signed-off-by:
-
Imre Deak authored
These macros are used only locally, so move them to the .c file. No functional change. v2: - add init power domain to always-on power wells in the following - separate - patch (Paulo) Signed-off-by:
-
Daniel Vetter authored
There are too many oustanding issues: - Fence handling in the current code is broken. There's a patch series from me, but it's blocked on and extended review (which includes writing the testcases). - IOMMU mapping handling is broken, we need to properly refcount it - currently it gets destroyed when the first vma is unbound, so way too early. - There's a pending reset issue on snb. Since Mika's reset work and full ppgtt have been pulled in in separate branches and ended up intermittingly breaking each another it's unclear who's the exact culprit here. - We still have persistent evidince of crazy recursion bugs through vma_unbind and ppgtt_relase, e.g. https://bugs.freedesktop.org/show_bug.cgi?id=73383 This issue (and a few others meanwhile resolved) have blocked our performance measuring/tuning group since 3 months. - Secure batch dispatching is broken. This is blocking Brad Volkin's command checker work since 3 months. All these issues are confirmed to only happen when full ppgtt is enabled, falling back to aliasing ppgtt resolves them. But even aliasing ppgtt itself still has a regression: - We currently unconditionally bind objects into the aliasing ppgtt, which means all priviledged objects like ringbuffers are visible to unpriviledged access again. On top of that this also breaks the command checker for aliasing ppgtt, since it can't hide the validated batch any more. Furthermore topic/full-ppgtt has never been reviewed: - Lifetime rules around vma unbinding/release are unclear, resulting into this awesome hack called ppgtt_release. Which seems to take the blame for most of the recursion fallout. - Context/ring init works different on gpu reset than anywhere else. Such differeneces have in the past always lead to really hard to track down bugs. - Aliasing ppgtt is treated in a bunch of places as a real address space, but it isn't - the real address space is always the global gtt in that case. This results in a bit a mess between contexts and ppgtt object, further complication the context/ppgtt/vma lifetime rules. - We don't have any docs describing the overall concepts introduced with full ppgtt. A short, concise overview describing vmas and some of the strange bits around them (like the unbound vmas used by execbuf, or the new binding rules) really is needed. Note that a lot of the post topic/full-ppgtt merge fallout has already been addressed, this entire list here of 10 issues really only contains the still outstanding issues. Finally the 3.15 merge window is approaching and I think we need to use the remaining time to ensure that our fallback option of using aliasing ppgtt is in solid shape. Hence I think it's time to throw the switch. While at it demote the helper from static inline status because really. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Imre Deak authored
These functions will be needed by the valleyview specific power well update functionality added in an upcoming patch, so move them earlier. No functional change. v2: - no change v3: - rebase on latest -nightly Signed-off-by:
-
Imre Deak authored
These functions are used only by a single call site and are simple enough to just fold them in. Note that in later patches the parts folded in here are further simplified as we'll remove hsw_{disable,enable}_package_c8 and the NULL check of the power well enable/disable handlers. All this means that at the end intel_display_power_get/put() becomes more understandable as we don't need to jump between two functions when reading the code. No functional change. v2: - clarify the rational for the change (Chris) Signed-off-by:
-
- 05 Mar, 2014 7 commits
-
-
Ville Syrjälä authored
We have two names for the same register CHICKEN_PIPESL_1 and HSW_PIPE_SLICE_CHICKEN_1. Unify it to just one. Also rename the FBCQ disable bit to resemble the name we've given to a similar bit on earlier platforms. Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Ville Syrjälä authored
gen7_enable_fbc() may write to some registers which we've already touched, so use RMW so that we don't undo any previous updates. Also note that we implemnt WaFbcAsynchFlipDisableFbcQueue:bdw. Signed-off-by:
-
Ville Syrjälä authored
Misplaced parens cause us to totally clobber the CHICKEN_PIPESL_1 registers with 0xffffffff. Move the parens to the correct place to avoid this. In particular this caused bit 30 of said registers to be set, which caused the sprite CSC to produce incorrect results. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72220Signed-off-by:
-
Daniel Vetter authored
... it's this time of the year again. Originally we've frobbed this to fix up some regressions, but maybe our DP code improved sufficiently now that we can dare to do again what the spec recommends. This reverts commit 2514bc51 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Jun 21 15:13:50 2012 -0700 drm/i915: prefer wide & slow to fast & narrow in DP configs I'm pretty sure I'll regret this patch, but otoh I expect we won't make progress here without poking the devil occasionally. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73694 Cc: peter@colberg.org Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by:
Itai BEN YAACOV <candeb@free.fr> Tested-by:
David En <d.engraf@arcor.de> Reported-and-Tested-by:
Marcus Bergner <marcusbergner@gmail.com> Reviewed-by:
-
Mika Kuoppala authored
As we now have intel_uncore_forcewake_reset() no need to do explicit put after reset. v2: rebase Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Damien Lespiau authored
While reading some code, out of boredom, stumbled on a tiny tiny fix. Signed-off-by:
-
Damien Lespiau authored
That macro was only ever used to convert ring->private into a gem object (hence the forceful cast). ring->private doesn't even exist anymore as it was transmogrified by Chris in: commit 0d1aacac Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Aug 26 20:58:11 2013 +0100 drm/i915: Embed the ring->private within the struct intel_ring_buffer Signed-off-by:
-
