- 16 Sep, 2016 2 commits
-
-
Jani Nikula authored
Fixes sparse warning: drivers/gpu/drm/i915/intel_dpll_mgr.c:1712:24: warning: Using plain integer as NULL pointer Fixes: a277ca7d ("drm/i915: Split bxt_ddi_pll_select()") Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-2-git-send-email-jani.nikula@intel.com
-
Jani Nikula authored
Fix sparse warning: drivers/gpu/drm/i915/intel_dp.c:1527:5: warning: symbol 'intel_dp_compute_bpp' was not declared. Should it be static? Fixes: f9bb705e ("drm/i915: Update bits per component for display info") Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Reviewed-by:
Jim Bride <jim.bride@linux.intel.com> Signed-off-by:
-
- 15 Sep, 2016 16 commits
-
-
Mika Kahola authored
Read DisplayPort branch device info from through debugfs interface. v2: use drm_dp_helper routines to collect data v3: cleanup to match the drm_dp_helper.c patches introduced earlier in this series v4: move DP branch device info to function 'intel_dp_branch_device_info()' v5: initial step to move debugging info from intel_dp. to drm_dp_helper.c (Daniel) v6: read hw and sw revision without using specific drm_dp_helper routines v7: indentation fixes (Jim Bride) Signed-off-by:Mika Kahola <mika.kahola@intel.com> Reviewed-by:
-
Mika Kahola authored
DisplayPort branch device may define max supported bits per component. Update display info based on this value if bpc is defined. v2: cleanup to match the drm_dp_helper.c patches introduced earlier in this series v3: Fill bpc for connector's display info in separate drm_dp_helper function (Daniel) v4: remove updating bpc for display info as it may be overridden when parsing EDID. Instead, check bpc for DP branch device during compute_config v5: Indentation fixes (Jim Bride) Signed-off-by: -
Mika Kahola authored
Filter out a mode that exceeds the max pixel rate setting for DP to VGA dongle. This is defined in DPCD register 0x81 if detailed cap info i.e. info field is 4 bytes long and it is available for DP downstream port. The register defines the pixel rate divided by 8 in MP/s. v2: DPCD read outs and computation moved to drm (Ville, Daniel) v3: Sink pixel rate computation moved to drm_dp_max_sink_dotclock() function (Daniel) v4: Use of drm_dp_helper.c routines to compute max pixel clock (Ville) v5: Use of intel_dp->downstream_ports to read out port capabilities. Code restructuring (Ville) v6: Move DP branch device check to drm_dp_helper.c (Daniel) v7: Cleanup as suggested by Ville Reviewed-by: -
Mika Kahola authored
SW revision is mandatory field for DisplayPort branch devices. This is defined in DPCD register fields 0x50A and 0x50B. v2: move drm_dp_ds_revision structure to be part of drm_dp_link structure (Daniel) v3: remove dependency to drm_dp_helper but instead parse DPCD and print SW revision info to dmesg (Ville) v4: commit message fix (Jim Bride) Signed-off-by: -
Mika Kahola authored
HW revision is mandatory field for DisplayPort branch devices. This is defined in DPCD register field 0x509. v2: move drm_dp_ds_revision structure to be part of drm_dp_link structure (Daniel) v3: remove dependency to drm_dp_helper but instead parse DPCD and print HW revision info to dmesg (Ville) Reviewed-by: -
Mika Kahola authored
Let's remove reference to "struct intel_connector *connector" in intel_dp_aux_init() function as it is no longer required. Reviewed-by:
-
Mika Kahola authored
Read DisplayPort branch device id string. Reviewed-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Mika Kahola authored
Helper routine to read out maximum supported bits per component for DisplayPort legay converters. v2: Return early if detailed port cap info is not available. Replace if-else ladder with switch-case (Ville) Reviewed-by: -
Mika Kahola authored
Helper routine to read out maximum supported pixel rate for DisplayPort legay VGA converter or TMDS clock rate for other digital legacy converters. The helper returns clock rate in kHz. v2: Return early if detailed port cap info is not available. Replace if-else ladder with switch-case (Ville) Reviewed-by: -
Mika Kahola authored
Drop "VGA" from bits per component definitions as these are also used by other standards such as DVI, HDMI, DP++. Reviewed-by:
-
Mika Kahola authored
Add missing DisplayPort downstream port types. The introduced new port types are DP++ and Wireless. Reviewed-by:
-
Deepak M authored
Adding the ddb size into the devide info will avoid platform checks while computing wm. v2: Added comment and WARN_ON if ddb size is zero.(Jani) v3: Added WARN_ON at the right place.(Jani) Suggested-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
Deepak M <m.deepak@intel.com> Signed-off-by:
-
Dave Gordon authored
Renaming to more consistent scheme, and updating comments, mostly about i915_guc_wq_reserve(), aka i915_guc_wq_check_space(). Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473711577-11454-4-git-send-email-david.s.gordon@intel.comReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Dave Gordon authored
Renaming to more consistent scheme, delete unused definitions Signed-off-by:
-
Dave Gordon authored
No functional changes; just renaming a bit, tweaking a datatype, prettifying layout, and adding comments, in particular in the GuC setup code that touches this data. Signed-off-by:
-
Dave Gordon authored
Commentary from Chris Wilson's original version: > I was looking at some wait_for() timeouts on a slow system, with lots of > debug enabled (KASAN, lockdep, mmio_debug). Thinking that we were > mishandling the timeout, I tried to ensure that we loop at least once > after first testing COND. However, the double test of COND either side > of the timeout check makes that unlikely. But we can do an equivalent > loop, that keeps the COND check after testing for timeout (required so > that we are not preempted between testing COND and then testing for a > timeout) without expanding COND twice. > > The advantage of only expanding COND once is a dramatic reduction in > code size: > > text data bss dec hex > 1308733 5184 1152 1315069 1410fd before > 1305341 5184 1152 1311677 1403bd after but it turned out that due to a missing iniitialiser, gcc had "gone wild trimming undefined code" :( This version acheives a rather more modest (but still worthwhile) gain of ~550 bytes. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
- 14 Sep, 2016 1 commit
-
-
Ville Syrjälä authored
Turns out commit a0562819 ("drm/i915: Get panel_type from OpRegion panel details") has regressed quite a few machines. So it looks like we can't use the panel type from OpRegion on all systems, and yet we absolutely must use it on some specific systems. Despite trying, I was unable to find any automagic way to determine if the OpRegion panel type is respectable or not. The only glimmer of hope I had was bit 8 in the SCIC response, but that turned out to not work either (it was always 0 on both types of systems). So, to fix the regressions without breaking the machine we know to need the OpRegion panel type, let's just add a quirk for this. Only specific machines known to require the OpRegion panel type will therefore use it. Everyone else will fall bck to the VBT panel type. The only known machine so far is a "Conrac GmbH IX45GM2". The PCI subsystem ID on this machine is just a generic 8086:2a42, so of no use. Instead we'll go with a DMI match. I suspect we can now also revert commit aeddda06 ("drm/i915: Ignore panel type from OpRegion on SKL") but let's leave that to a separate patch. v2: Do the DMI match in the opregion code directly, as dev_priv->quirks gets populated too late Cc: Rob Kramer <rob@solution-space.com> Cc: Martin van Es <martin@mrvanes.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Marco Krüger <krgsch@gmail.com> Cc: Sean Greenslade <sean@seangreenslade.com> Cc: Trudy Tective <bertslany@gmail.com> Cc: Robin Müller <rm1990@gmx.de> Cc: Alexander Kobel <a-kobel@a-kobel.de> Cc: Alexey Shumitsky <alexey.shumitsky@gmail.com> Cc: Emil Andersen Lauridsen <mine809@gmail.com> Cc: oceans112@gmail.com Cc: James Hogan <james@albanarts.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org References: https://lists.freedesktop.org/archives/intel-gfx/2016-August/105545.html References: https://lists.freedesktop.org/archives/dri-devel/2016-August/116888.html References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94825 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97060 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97443 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97363 Fixes: a0562819 ("drm/i915: Get panel_type from OpRegion panel details") Tested-by:
Marco Krüger <krgsch@gmail.com> Tested-by:
Alexey Shumitsky <alexey.shumitsky@gmail.com> Tested-by:
Sean Greenslade <sean@seangreenslade.com> Tested-by:
Emil Andersen Lauridsen <mine809@gmail.com> Tested-by:
Robin Müller <rm1990@gmx.de> Tested-by: oceans112@gmail.com Tested-by:
Rob Kramer <rob@solution-space.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473758539-21565-1-git-send-email-ville.syrjala@linux.intel.com References: http://patchwork.freedesktop.org/patch/msgid/1473602239-15855-1-git-send-email-adrienverge@gmail.comAcked-by:
-
- 13 Sep, 2016 2 commits
-
-
Rodrigo Vivi authored
This reverts commit 1c80c25f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed May 18 18:47:12 2016 +0200 drm/i915/psr: Make idle_frames sensible again There are panels that needs 4 idle frames before entering PSR, but VBT is unproperly set. Also lately it was identified that idle frame count calculated at HW can be off by 1, what makes the minimum of 2, at least. Without the current vbt+1 we are with the risk of having HW calculating 0 idle frames and entering PSR when it shouldn't. Regardless the lack of link training. [Jani: there is some disagreement on the explanation, but the commit regresses so revert it is.] References: http://marc.info/?i=20160904191153.GA2328@light.dominikbrodowski.net Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 1c80c25f ("drm/i915/psr: Make idle_frames sensible again") Cc: drm-intel-fixes@lists.freedesktop.org # v4.8-rc1+ Signed-off-by:
-
Navare, Manasi D authored
This adds support for KBL in the new function added in commit ID: commit <f169660e> that returns a shared pll in case of DDI platforms. Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
- 12 Sep, 2016 1 commit
-
-
Matthew Auld authored
drm already provides fallback versions of readq and writeq. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
- 09 Sep, 2016 18 commits
-
-
Navare, Manasi D authored
Fix the number of tries in channel euqalization link training sequence according to DP 1.2 Spec. It returns a boolean depending on channel equalization pass or failure. Signed-off-by:
-
Dhinakaran Pandiyan authored
This function cleans up clock recovery loop in link training compliant tp Dp Spec 1.2. It tries the clock recovery 5 times for the same voltage or until max voltage swing is reached and removes the additional non compliant retries. This function now returns a boolean values based on if clock recovery passed or failed. v3: * Better Debug prints in case of failures (Mika Kahola) v2: * Rebased on top of new revision of vswing patch (Manasi Navare) Signed-off-by:
-
Dhinakaran Pandiyan authored
Wrap the max. vswing check in a separate function. This makes the clock recovery phase of DP link training cleaner v3: Fixed the paranthesis warning (Mika Kahola) v2: Fixed the Compiler warning (Mika Kahola) Signed-off-by:
-
Jim Bride authored
Add the PLL selection code for HSW/BDW/BXT/SKL into a stand-alone function in order to allow for the implementation of a platform neutral upfront link training function. v4: * Removed dereferencing NULL pointer in case of failure (Dhinakaran Pandiyan) v3: * Add Hooks for all DDI platforms into this standalone function v2: * Change the macro to use dev_priv instead of dev (David Weinehall) Reviewed-by:
Durgadoss R <durgadoss.r@intel.com> Signed-off-by:
-
Chris Wilson authored
Recently I have been applying an optimisation to avoid stalling and clflushing GGTT objects based on their current binding. That is we only set-to-gtt-domain upon first bind. However, on hibernation the objects remain bound, but they are in the CPU domain. Currently (since commit 975f7ff4 ("drm/i915: Lazily migrate the objects after hibernation")) we only flush scanout objects as all other objects are expected to be flushed prior to use. That breaks down in the face of the runtime optimisation above - and we need to flush all GGTT pinned objects (essentially ringbuffers). To reduce the burden of extra clflushes, we only flush those objects we cannot discard from the GGTT. Everything pinned to the scanout, or current contexts or ringbuffers will be flushed and rebound. Other objects, such as inactive contexts, will be left unbound and in the CPU domain until first use after resuming. Fixes: 7abc98fa ("drm/i915: Only change the context object's domain...") Fixes: 57e88531 ("drm/i915: Use VMA for ringbuffer tracking") References: https://bugs.freedesktop.org/show_bug.cgi?id=94722Signed-off-by:
-
Chris Wilson authored
In an attempt to keep the hibernation image as same as possible, let's try and discard any unwanted pages and our own page arrays. Signed-off-by:
-
Chris Wilson authored
Now that we can wait upon fences before emitting the request, it becomes trivial to wait upon any implicit fence provided by the dma-buf reservation object. To protect against failure, we force any asynchronous waits on a foreign fence to timeout after 10s - so that a stall in another driver does not permanently cripple ourselves. Still unpleasant though! Testcase: igt/prime_vgem/fence-wait Signed-off-by:
John Harrison <john.c.harrison@intel.com> Reviewed-by:
-
Chris Wilson authored
Now that we have fences in place to drive request submission, we can employ those to queue requests after their dependencies as opposed to stalling in the middle of an execbuf ioctl. (However, we still choose to spin before enabling the IRQ as that is faster - though contentious.) v2: Do the fence ordering first, where we can still fail. Signed-off-by:
-
Chris Wilson authored
If we are waiting upon an external fence, from the pov of hangcheck the engine is stuck on the last submitted seqno. Currently we give a small increment to the hangcheck score in order to catch a stuck waiter / driver. Now that we both have an independent wait hangcheck and may be stuck waiting on an external fence, resetting the GPU has little effect on that external fence. As we cannot advance by resetting, skip incrementing the hangcheck score. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-19-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we find a ring waiting on a semaphore for another assigned but not yet emitted request, treat it as valid and waiting. Signed-off-by:
-
Chris Wilson authored
Currently the presumption is that the request construction and its submission to the GuC are all under the same holding of struct_mutex. We wish to relax this to separate the request construction and the later submission to the GuC. This requires us to reserve some space in the GuC command queue for the future submission. For flexibility to handle out-of-order request submission we do not preallocate the next slot in the GuC command queue during request construction, just ensuring that there is enough space later. Signed-off-by:
-
Chris Wilson authored
We are about to specialize object synchronisation to enable nonblocking execbuf submission. First we make a copy of the current object synchronisation for execbuffer. The general i915_gem_object_sync() will be removed following the removal of CS flips in the near future. Signed-off-by:
-
Chris Wilson authored
Let's avoid mixing sealing the hardware commands for the request and adding the request to the software tracking. Signed-off-by:
-
Chris Wilson authored
Drive final request submission from a callback from the fence. This way the request is queued until all dependencies are resolved, at which point it is handed to the backend for queueing to hardware. At this point, no dependencies are set on the request, so the callback is immediate. A side-effect of imposing a heavier-irqsafe spinlock for execlist submission is that we lose the softirq enabling after scheduling the execlists tasklet. To compensate, we manually kickstart the softirq by disabling and enabling the bh around the fence signaling. Signed-off-by:
-
Chris Wilson authored
Update reset path in preparation for engine reset which requires identification of incomplete requests and associated context and fixing their state so that engine can resume correctly after reset. The request that caused the hang will be skipped and head is reset to the start of breadcrumb. This allows us to resume from where we left-off. Since this request didn't complete normally we also need to cleanup elsp queue manually. This is vital if we employ nonblocking request submission where we may have a web of dependencies upon the hung request and so advancing the seqno manually is no longer trivial. ABI: gem_reset_stats / DRM_IOCTL_I915_GET_RESET_STATS We change the way we count pending batches. Only the active context involved in the reset is marked as either innocent or guilty, and not mark the entire world as pending. By inspection this only affects igt/gem_reset_stats (which assumes implementation details) and not piglit. ARB_robustness gives this guide on how we expect the user of this interface to behave: * Provide a mechanism for an OpenGL application to learn about graphics resets that affect the context. When a graphics reset occurs, the OpenGL context becomes unusable and the application must create a new context to continue operation. Detecting a graphics reset happens through an inexpensive query. And with regards to the actual meaning of the reset values: Certain events can result in a reset of the GL context. Such a reset causes all context state to be lost. Recovery from such events requires recreation of all objects in the affected context. The current status of the graphics reset state is returned by enum GetGraphicsResetStatusARB(); The symbolic constant returned indicates if the GL context has been in a reset state at any point since the last call to GetGraphicsResetStatusARB. NO_ERROR indicates that the GL context has not been in a reset state since the last call. GUILTY_CONTEXT_RESET_ARB indicates that a reset has been detected that is attributable to the current GL context. INNOCENT_CONTEXT_RESET_ARB indicates a reset has been detected that is not attributable to the current GL context. UNKNOWN_CONTEXT_RESET_ARB indicates a detected graphics reset whose cause is unknown. The language here is explicit in that we must mark up the guilty batch, but is loose enough for us to relax the innocent (i.e. pending) accounting as only the active batches are involved with the reset. In the future, we are looking towards single engine resetting (with minimal locking), where it seems inappropriate to mark the entire world as innocent since the reset occurred on a different engine. Reducing the information available means we only have to encounter the pain once, and also reduces the information leaking from one context to another. v2: Legacy ringbuffer submission required a reset following hibernation, or else we restore stale values to the RING_HEAD and walked over stolen garbage. v3: GuC requires replaying the requests after a reset. v4: Restore engine IRQ after reset (so waiters will be woken!) Rearm hangcheck if resetting with a waiter. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: -
Chris Wilson authored
Since we have a cooperative mode now with a direct reset, we can avoid the contention on struct_mutex and instead try then sleep on the I915_RESET_IN_PROGRESS bit. If the mutex is held and that bit is cleared, all is fine. Otherwise, we sleep for a bit and try again. In the worst case we sleep for an extra second waiting for the mutex to be released (no one touching the GPU is allowed the struct_mutex whilst the I915_RESET_IN_PROGRESS bit is set). But when we have a direct reset, this allows us to clean up the reset worker faster. v2: Remember to call wake_up_bit() after changing (for the faster wakeup as promised) Signed-off-by:
-
Chris Wilson authored
If a waiter is holding the struct_mutex, then the reset worker cannot reset the GPU until the waiter returns. We do not want to return -EAGAIN form i915_wait_request as that breaks delicate operations like i915_vma_unbind() which often cannot be restarted easily, and returning -EIO is just as useless (and has in the past proven dangerous). The remaining WARN_ON(i915_wait_request) serve as a valuable reminder that handling errors from an indefinite wait are tricky. We can keep the current semantic that knowing after a reset is complete, so is the request, by performing the reset ourselves if we hold the mutex. uevent emission is still handled by the reset worker, so it may appear slightly out of order with respect to the actual reset (and concurrent use of the device). Signed-off-by:
-
Chris Wilson authored
In the next patch we want to handle reset directly by a locked waiter in order to avoid issues with returning before the reset is handled. To handle the reset, we must first know whether we hold the struct_mutex. If we do not hold the struct_mtuex we can not perform the reset, but we do not block the reset worker either (and so we can just continue to wait for request completion) - otherwise we must relinquish the mutex. Signed-off-by:
-
