Pull GPIO fixes from Linus Walleij:
 "These are hopefully the last GPIO fixes for v4.9. The most important
  is that it fixes the UML randconfig builds that have been nagging me
  for some time and me being confused about where the problem was really
  sitting, now this fix give this nice feeling that everything is solid
  and builds fine.

  Summary:

   - Finally, after being puzzled by a bunch of recurrent UML build
     failures on randconfigs from the build robot, Keno Fischer nailed
     it: GPIO_DEVRES is optional and depends on HAS_IOMEM even though
     many users just unconditionally rely on it to be available. And it
     *should* be available: garbage collection is nice for this and it
     *certainly* has nothing to do with having IOMEM. So we got rid of
     it, and now the UML builds should JustWork(TM).

   - Do not call .get_direction() on sleeping GPIO chips on the fastpath
     when locking GPIOs for interrupts: it is done from atomic context,
     no way.

   - Some driver fixes"

* tag 'gpio-v4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Remove GPIO_DEVRES option
  gpio: tc3589x: fix up .get_direction()
  gpio: do not double-check direction on sleeping chips
  gpio: pca953x: Move memcpy into mutex lock for set multiple
  gpio: pca953x: Fix corruption of other gpios in set_multiple.

Pull drm fixes from Dave Airlie:
 "i915 fixes + 2 mediatek regressions.

  So some i915 fixes came in which I thought they might so I'm sending
  those along with two reverts for two patches to the mediatek driver
  that didn't seem to build so well, I've fixed up my -fixes ARM build
  and .config so I could see it, but yes brown paper bag time"

* tag 'drm-fixes-for-v4.9-rc6-brown-paper-bag' of git://people.freedesktop.org/~airlied/linux:
  Revert "drm/mediatek: set vblank_disable_allowed to true"
  Revert "drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE"
  drm/i915: Assume non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT
  drm/i915: Refresh that status of MST capable connectors in ->detect()
  drm/i915: Grab the rotation from the passed plane state for VLV sprites
  drm/i915: Mark CPU cache as dirty when used for rendering

i915 misc fixes.

* tag 'drm-intel-fixes-2016-11-17' of ssh://git.freedesktop.org/git/drm-intel:
  drm/i915: Assume non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT
  drm/i915: Refresh that status of MST capable connectors in ->detect()
  drm/i915: Grab the rotation from the passed plane state for VLV sprites
  drm/i915: Mark CPU cache as dirty when used for rendering

This reverts commit f752fff6.
Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit 83ba62bc.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull block fixes from Jens Axboe:
 "A set of fixes, one for NVMe from Keith, and a set for nvme-{rdma,t,f}
  from the usual suspects, fixing actual problems that would be a shame
  to release 4.9 with"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme/pci: Don't free queues on error
  nvmet-rdma: drain the queue-pair just before freeing it
  nvme-rdma: stop and free io queues on connect failure
  nvmet-rdma: don't forget to delete a queue from the list of connection failed
  nvmet: Don't queue fatal error work if csts.cfs is set
  nvme-rdma: reject non-connect commands before the queue is live
  nvmet-rdma: Fix possible NULL deref when handling rdma cm events

Pull rmda fixes from Doug Ledford.
 "First round of -rc fixes.

  Due to various issues, I've been away and couldn't send a pull request
  for about three weeks. There were a number of -rc patches that built
  up in the meantime (some where there already from the early -rc
  stages). Obviously, there were way too many to send now, so I tried to
  pare the list down to the more important patches for the -rc cycle.

  Most of the code has had plenty of soak time at the various vendor's
  testing setups, so I doubt there will be another -rc pull request this
  cycle. I also tried to limit the patches to those with smaller
  footprints, so even though a shortlog is longer than I would like, the
  actual diffstat is mostly very small with the exception of just three
  files that had more changes, and a couple files with pure removals.

  Summary:
   - Misc Intel hfi1 fixes
   - Misc Mellanox mlx4, mlx5, and rxe fixes
   - A couple cxgb4 fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits)
  iw_cxgb4: invalidate the mr when posting a read_w_inv wr
  iw_cxgb4: set *bad_wr for post_send/post_recv errors
  IB/rxe: Update qp state for user query
  IB/rxe: Clear queue buffer when modifying QP to reset
  IB/rxe: Fix handling of erroneous WR
  IB/rxe: Fix kernel panic in UDP tunnel with GRO and RX checksum
  IB/mlx4: Fix create CQ error flow
  IB/mlx4: Check gid_index return value
  IB/mlx5: Fix NULL pointer dereference on debug print
  IB/mlx5: Fix fatal error dispatching
  IB/mlx5: Resolve soft lock on massive reg MRs
  IB/mlx5: Use cache line size to select CQE stride
  IB/mlx5: Validate requested RQT size
  IB/mlx5: Fix memory leak in query device
  IB/core: Avoid unsigned int overflow in sg_alloc_table
  IB/core: Add missing check for addr_resolve callback return value
  IB/core: Set routable RoCE gid type for ipv4/ipv6 networks
  IB/cm: Mark stale CM id's whenever the mad agent was unregistered
  IB/uverbs: Fix leak of XRC target QPs
  IB/hfi1: Remove incorrect IS_ERR check
  ...

Pull vfs fixes from Al Viro:
 "A couple of regression fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix iov_iter_advance() for ITER_PIPE
  xattr: Fix setting security xattrs on sockfs

Pull orangefs fix from Mike Marshall:
 "orangefs: add .owner to debugfs file_operations

  Without ".owner = THIS_MODULE" it is possible to crash the kernel by
  unloading the Orangefs module while someone is reading debugfs files"

* tag 'for-linus-4.9-rc5-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: add .owner to debugfs file_operations

Prior to 3.15, there was a race between zap_pte_range() and
page_mkclean() where writes to a page could be lost.  Dave Hansen
discovered by inspection that there is a similar race between
move_ptes() and page_mkclean().

We've been able to reproduce the issue by enlarging the race window with
a msleep(), but have not been able to hit it without modifying the code.
So, we think it's a real issue, but is difficult or impossible to hit in
practice.

The zap_pte_range() issue is fixed by commit 1cf35d47("mm: split
'tlb_flush_mmu()' into tlb flushing and memory freeing parts").  And
this patch is to fix the race between page_mkclean() and mremap().

Here is one possible way to hit the race: suppose a process mmapped a
file with READ | WRITE and SHARED, it has two threads and they are bound
to 2 different CPUs, e.g.  CPU1 and CPU2.  mmap returned X, then thread
1 did a write to addr X so that CPU1 now has a writable TLB for addr X
on it.  Thread 2 starts mremaping from addr X to Y while thread 1
cleaned the page and then did another write to the old addr X again.
The 2nd write from thread 1 could succeed but the value will get lost.

        thread 1                           thread 2
     (bound to CPU1)                    (bound to CPU2)

  1: write 1 to addr X to get a
     writeable TLB on this CPU

                                        2: mremap starts

                                        3: move_ptes emptied PTE for addr X
                                           and setup new PTE for addr Y and
                                           then dropped PTL for X and Y

  4: page laundering for N by doing
     fadvise FADV_DONTNEED. When done,
     pageframe N is deemed clean.

  5: *write 2 to addr X

                                        6: tlb flush for addr X

  7: munmap (Y, pagesize) to make the
     page unmapped

  8: fadvise with FADV_DONTNEED again
     to kick the page off the pagecache

  9: pread the page from file to verify
     the value. If 1 is there, it means
     we have lost the written 2.

  *the write may or may not cause segmentation fault, it depends on
  if the TLB is still on the CPU.

Please note that this is only one specific way of how the race could
occur, it didn't mean that the race could only occur in exact the above
config, e.g. more than 2 threads could be involved and fadvise() could
be done in another thread, etc.

For anonymous pages, they could race between mremap() and page reclaim:
THP: a huge PMD is moved by mremap to a new huge PMD, then the new huge
PMD gets unmapped/splitted/pagedout before the flush tlb happened for
the old huge PMD in move_page_tables() and we could still write data to
it.  The normal anonymous page has similar situation.

To fix this, check for any dirty PTE in move_ptes()/move_huge_pmd() and
if any, did the flush before dropping the PTL.  If we did the flush for
every move_ptes()/move_huge_pmd() call then we do not need to do the
flush in move_pages_tables() for the whole range.  But if we didn't, we
still need to do the whole range flush.

Alternatively, we can track which part of the range is flushed in
move_ptes()/move_huge_pmd() and which didn't to avoid flushing the whole
range in move_page_tables().  But that would require multiple tlb
flushes for the different sub-ranges and should be less efficient than
the single whole range flush.

KBuild test on my Sandybridge desktop doesn't show any noticeable change.
v4.9-rc4:
  real    5m14.048s
  user    32m19.800s
  sys     4m50.320s

With this commit:
  real    5m13.888s
  user    32m19.330s
  sys     4m51.200s
Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

iov_iter_advance() needs to decrement iter->count by the number of
bytes we'd moved beyond.  Normal flavours do that, but ITER_PIPE
doesn't and ITER_PIPE generic_file_read_iter() for O_DIRECT files
ends up with a bogus fallback to page cache read, resulting in incorrect
values for file offset and bytes read.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The IOP_XATTR flag is set on sockfs because sockfs supports getting the
"system.sockprotoname" xattr.  Since commit 6c6ef9f2, this flag is checked for
setxattr support as well.  This is wrong on sockfs because security xattr
support there is supposed to be provided by security_inode_setsecurity.  The
smack security module relies on socket labels (xattrs).

Fix this by adding a security xattr handler on sockfs that returns
-EAGAIN, and by checking for -EAGAIN in setxattr.

We cannot simply check for -EOPNOTSUPP in setxattr because there are
filesystems that neither have direct security xattr support nor support
via security_inode_setsecurity.  A more proper fix might be to move the
call to security_inode_setsecurity into sockfs, but it's not clear to me
if that is safe: we would end up calling security_inode_post_setxattr after
that as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull drm fixes fr9om Dave Airlie:
 "Fixes for amdgpu, and a bunch of arm drivers.

  There seems to be an uptick in the ARM drivers sending things for
  fixes which is good, so I've decided to dequeue a bit early, more
  stuff may arrive before the weekend.

  This contains mediatek, arcpgu, sunxi, fsl-dcu display controller
  fixes along with 3 amdgpu fixes, one for a fencing issue with
  secondary GPUs"

* tag 'drm-fixes-for-v4.9-rc6' of git://people.freedesktop.org/~airlied/linux:
  drm/amdgpu:fix vpost_needed routine
  drm/amdgpu/powerplay: drop a redundant NULL check
  drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)
  drm/arcpgu: Accommodate adv7511 switch to DRM bridge
  drm/fsl-dcu: disable planes before disabling CRTC
  drm/fsl-dcu: update all registers on flush
  drm/fsl-dcu: do not update when modifying irq registers
  drm/sun4i: Propagate error to the caller
  drm/sun4i: Fix error handling
  drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range
  drm/mediatek: enhance the HDMI driving current
  drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
  drm/mediatek: clear IRQ status before enable OVL interrupt
  drm/mediatek: set vblank_disable_allowed to true
  drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE
  drm/sun4i: rgb: Remove the bridge enable/disable functions
  drm/sun4i: rgb: Enable panel after controller

Also, rearrange things a bit to have a common c4iw_invalidate_mr()
function used everywhere that we need to invalidate.

Fixes: 49b53a93 ("iw_cxgb4: add fast-path for small REG_MR operations")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

There are a few cases in c4iw_post_send() and c4iw_post_receive()
where *bad_wr is not set when an error is returned.  This can
cause a crash if the application tries to use bad_wr.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The method rxe_qp_error() transitions QP to error state
and make sure the QP is drained. It did not though update
the QP state for user's query.

This patch fixes this.

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RXE resets the send-q only once in rxe_qp_init_req() when
QP is created, but when the QP is reused after QP reset, the send-q
holds previous garbage data.

This garbage data wrongly fails CQEs that otherwise
should have completed successfully.

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

To correctly handle a erroneous WR this fix does the following
1. Make sure the bad WQE causes a user completion event.
2. Call rxe_completer to handle the erred WQE.

Before the fix, when rxe_requester found a bad WQE, it changed its
status to IB_WC_LOC_PROT_ERR and exit with 0 for non RC QPs.

If this was the 1st WQE then there would be no ACK to invoke the
completer and this bad WQE would be stuck in the QP's send-q.

On top of that the requester exiting with 0 caused rxe_do_task to
endlessly invoke rxe_requester, resulting in a soft-lockup attached
below.

In case the WQE was not the 1st and rxe_completer did get a chance to
handle the bad WQE, it did not cause a complete event since the WQE's
IB_SEND_SIGNALED flag was not set.

Setting WQE status to IB_SEND_SIGNALED is subject to IBA spec
version 1.2.1, section 10.7.3.1 Signaled Completions.

NMI watchdog: BUG: soft lockup - CPU#7 stuck for 22s!
[<ffffffffa0590145>] ? rxe_pool_get_index+0x35/0xb0 [rdma_rxe]
[<ffffffffa05952ec>] lookup_mem+0x3c/0xc0 [rdma_rxe]
[<ffffffffa0595534>] copy_data+0x1c4/0x230 [rdma_rxe]
[<ffffffffa058c180>] rxe_requester+0x9d0/0x1100 [rdma_rxe]
[<ffffffff8158e98a>] ? kfree_skbmem+0x5a/0x60
[<ffffffffa05962c9>] rxe_do_task+0x89/0xf0 [rdma_rxe]
[<ffffffffa05963e2>] rxe_run_task+0x12/0x30 [rdma_rxe]
[<ffffffffa059110a>] rxe_post_send+0x41a/0x550 [rdma_rxe]
[<ffffffff811ef922>] ? __kmalloc+0x182/0x200
[<ffffffff816ba512>] ? down_read+0x12/0x40
[<ffffffffa054bd32>] ib_uverbs_post_send+0x532/0x540 [ib_uverbs]
[<ffffffff815f8722>] ? tcp_sendmsg+0x402/0xb80
[<ffffffffa05453dc>] ib_uverbs_write+0x18c/0x3f0 [ib_uverbs]
[<ffffffff81623c2e>] ? inet_recvmsg+0x7e/0xb0
[<ffffffff8158764d>] ? sock_recvmsg+0x3d/0x50
[<ffffffff81215b87>] __vfs_write+0x37/0x140
[<ffffffff81216892>] vfs_write+0xb2/0x1b0
[<ffffffff81217ce5>] SyS_write+0x55/0xc0
[<ffffffff816bc672>] entry_SYSCALL_64_fastpath+0x1a/0xa

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Missing initialization of udp_tunnel_sock_cfg causes to following
kernel panic, while kernel tries to execute gro_receive().

While being there, we converted udp_port_cfg to use the same
initialization scheme as udp_tunnel_sock_cfg.

------------[ cut here ]------------
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle kernel paging request at ffffffffa0588c50
IP: [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe]
PGD 1c09067 PUD 1c0a063 PMD bb394067 PTE 80000000ad5e8163
Oops: 0011 [#1] SMP
Modules linked in: ib_rxe ip6_udp_tunnel udp_tunnel
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.7.0-rc3+ #2
Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011
task: ffff880235e4e680 ti: ffff880235e68000 task.ti: ffff880235e68000
RIP: 0010:[<ffffffffa0588c50>]
[<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe]
RSP: 0018:ffff880237343c80  EFLAGS: 00010282
RAX: 00000000dffe482d RBX: ffff8800ae330900 RCX: 000000002001b712
RDX: ffff8800ae330900 RSI: ffff8800ae102578 RDI: ffff880235589c00
RBP: ffff880237343cb0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ae33e262
R13: ffff880235589c00 R14: 0000000000000014 R15: ffff8800ae102578
FS:  0000000000000000(0000) GS:ffff880237340000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0588c50 CR3: 0000000001c06000 CR4: 00000000000006e0
Stack:
ffffffff8160860e ffff8800ae330900 ffff8800ae102578 0000000000000014
000000000000004e ffff8800ae102578 ffff880237343ce0 ffffffff816088fb
0000000000000000 ffff8800ae330900 0000000000000000 00000000ffad0000
Call Trace:
<IRQ>
[<ffffffff8160860e>] ? udp_gro_receive+0xde/0x130
[<ffffffff816088fb>] udp4_gro_receive+0x10b/0x2d0
[<ffffffff81611373>] inet_gro_receive+0x1d3/0x270
[<ffffffff81594e29>] dev_gro_receive+0x269/0x3b0
[<ffffffff81595188>] napi_gro_receive+0x38/0x120
[<ffffffffa011caee>] mlx5e_handle_rx_cqe+0x27e/0x340 [mlx5_core]
[<ffffffffa011d076>] mlx5e_poll_rx_cq+0x66/0x6d0 [mlx5_core]
[<ffffffffa011d7ae>] mlx5e_napi_poll+0x8e/0x400 [mlx5_core]
[<ffffffff815949a0>] net_rx_action+0x160/0x380
[<ffffffff816a9197>] __do_softirq+0xd7/0x2c5
[<ffffffff81085c35>] irq_exit+0xf5/0x100
[<ffffffff816a8f16>] do_IRQ+0x56/0xd0
[<ffffffff816a6dcc>] common_interrupt+0x8c/0x8c
<EOI>
[<ffffffff81061f96>] ? native_safe_halt+0x6/0x10
[<ffffffff81037ade>] default_idle+0x1e/0xd0
[<ffffffff8103828f>] arch_cpu_idle+0xf/0x20
[<ffffffff810c37dc>] default_idle_call+0x3c/0x50
[<ffffffff810c3b13>] cpu_startup_entry+0x323/0x3c0
[<ffffffff81050d8c>] start_secondary+0x15c/0x1a0
RIP  [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe]
RSP <ffff880237343c80>
CR2: ffffffffa0588c50
---[ end trace 489ee31fa7614ac5 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception in interrupt
------------[ cut here ]------------

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Currently, if ib_copy_to_udata fails, the CQ
won't be deleted from the radix tree and the HW (HW2SW).

Fixes: 225c7b1f ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Check the returned GID index value and return an error if it is invalid.

Fixes: 5070cd22 ('IB/mlx4: Replace mechanism for RoCE GID management')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

For XRC QP CQs may not exist. Check before attempting dereference.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When an internal error condition is detected, make sure to set the
device inactive after dispatching the event so ULPs can get a
notification of this event.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When calling reg_mr of large MRs (e.g. 4GB) from multiple processes
and MR caches can't supply the required amount of MRs the slow-path
of MR allocation may be used. In this case we need to serialize the
slow-path between the processes to avoid soft lock.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When creating kernel CQs use 128B CQE stride if the
cache line size is 128B, 64B otherwise.  This prevents
multiple CQEs from residing in a 128B cache line,
which can cause retries when there are concurrent
read and writes in one cache line.

Tested with IPoIB on PPC64, saw ~5% throughput
improvement.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Validate that the requested size of RQT is supported by firmware.

Fixes: c5f90929 ('IB/mlx5: Add Receive Work Queue Indirection table operations')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

We need to free dev->port when we fail to enable RoCE or
initialize node data.

Fixes: 0837e86a ('IB/mlx5: Add per port counters')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

sg_alloc_table gets unsigned int as parameter while the driver
returns it as size_t. Check npages isn't greater than maximum
unsigned int.

Fixes: eeb8461e ("IB: Refactor umem to use linear SG table")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When calling rdma_resolve_ip inside rdma_addr_find_l2_eth_by_grh,
the return status of the request was ignored in the callback function
causing a successful return and an empty dmac.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

On Thu, Oct 27, 2016 at 04:36:28PM +0300, Leon Romanovsky wrote:
> From: Mark Bloch <markb@mellanox.com>
>
> If the underlying netowrk type is ipv4 or ipv6 and the device supports
> routable RoCE, prefer it so the traffic could cross subnets.
>
> Signed-off-by: Mark Bloch <markb@mellanox.com>
> Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
> Signed-off-by: Leon Romanovsky <leon@kernel.org>
> ---

Hi Doug,

Please take the following v1 of this patch where I fixed spelling error
from "netowrk" to be "network".

Thanks.

>From 09f96ba3e9b4442cfb44dca04c6726e55525c9c3 Mon Sep 17 00:00:00 2001
From: Mark Bloch <markb@mellanox.com>
Date: Sun, 11 Sep 2016 06:25:10 +0000
Subject: [PATCH rdma-rc v1 3/6] IB/core: Set routable RoCE gid type for ipv4/ipv6
 networks

If the underlying network type is ipv4 or ipv6 and the device supports
routable RoCE, prefer it so the traffic could cross subnets.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When there is a CM id object that has port assigned to it, it means that
the cm-id asked for the specific port that it should go by it, but if
that port was removed (hot-unplug event) the cm-id was not updated.
In order to fix that the port keeps a list of all the cm-id's that are
planning to go by it, whenever the port is removed it marks all of them
as invalid.

This commit fixes a kernel panic which happens when running traffic between
guests and we force reboot a guest mid traffic, it triggers a kernel panic:

 Call Trace:
  [<ffffffff815271fa>] ? panic+0xa7/0x16f
  [<ffffffff8152b534>] ? oops_end+0xe4/0x100
  [<ffffffff8104a00b>] ? no_context+0xfb/0x260
  [<ffffffff81084db2>] ? del_timer_sync+0x22/0x30
  [<ffffffff8104a295>] ? __bad_area_nosemaphore+0x125/0x1e0
  [<ffffffff81084240>] ? process_timeout+0x0/0x10
  [<ffffffff8104a363>] ? bad_area_nosemaphore+0x13/0x20
  [<ffffffff8104aabf>] ? __do_page_fault+0x31f/0x480
  [<ffffffff81065df0>] ? default_wake_function+0x0/0x20
  [<ffffffffa0752675>] ? free_msg+0x55/0x70 [mlx5_core]
  [<ffffffffa0753434>] ? cmd_exec+0x124/0x840 [mlx5_core]
  [<ffffffff8105a924>] ? find_busiest_group+0x244/0x9f0
  [<ffffffff8152d45e>] ? do_page_fault+0x3e/0xa0
  [<ffffffff8152a815>] ? page_fault+0x25/0x30
  [<ffffffffa024da25>] ? cm_alloc_msg+0x35/0xc0 [ib_cm]
  [<ffffffffa024e821>] ? ib_send_cm_dreq+0xb1/0x1e0 [ib_cm]
  [<ffffffffa024f836>] ? cm_destroy_id+0x176/0x320 [ib_cm]
  [<ffffffffa024fb00>] ? ib_destroy_cm_id+0x10/0x20 [ib_cm]
  [<ffffffffa034f527>] ? ipoib_cm_free_rx_reap_list+0xa7/0x110 [ib_ipoib]
  [<ffffffffa034f590>] ? ipoib_cm_rx_reap+0x0/0x20 [ib_ipoib]
  [<ffffffffa034f5a5>] ? ipoib_cm_rx_reap+0x15/0x20 [ib_ipoib]
  [<ffffffff81094d20>] ? worker_thread+0x170/0x2a0
  [<ffffffff8109b2a0>] ? autoremove_wake_function+0x0/0x40
  [<ffffffff81094bb0>] ? worker_thread+0x0/0x2a0
  [<ffffffff8109aef6>] ? kthread+0x96/0xa0
  [<ffffffff8100c20a>] ? child_rip+0xa/0x20
  [<ffffffff8109ae60>] ? kthread+0x0/0xa0
  [<ffffffff8100c200>] ? child_rip+0x0/0x20

Fixes: a977049d ("[PATCH] IB: Add the kernel CM implementation")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The real QP is destroyed in case of the ref count reaches zero, but
for XRC target QPs this call was missed and caused to QP leaks.

Let's call to destroy for all flows.

Fixes: 0e0ec7e0 ('RDMA/core: Export ib_open_qp() to share XRC...')
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Pull Xtensa fixes from Max Filippov:

 - fix register dumps, stack dumps and stack traces that got torn due to
   recent printk changes

 - wire up pkey_{mprotect,alloc,free} syscalls

* tag 'xtensa-20161116' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: wire up new pkey_{mprotect,alloc,free} syscalls
  xtensa: clean up printk usage for boot/crash logging

Just a few bug fixes for 4.9.  The big one is Mario's prime fencing fix.

* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu:fix vpost_needed routine
  drm/amdgpu/powerplay: drop a redundant NULL check
  drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)

Merge branch 'mediatek-drm-fixes-2016-11-11' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes

This branch include one patch to fix a typo, two patches to disable
vblank interrupt, and three patches to support HDMI 4K resolution.

* 'mediatek-drm-fixes-2016-11-11' of https://github.com/ckhu-mediatek/linux.git-tags:
  drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range
  drm/mediatek: enhance the HDMI driving current
  drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
  drm/mediatek: clear IRQ status before enable OVL interrupt
  drm/mediatek: set vblank_disable_allowed to true
  drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE

This option was added in 6a89a314 to
allow use of the devm_gpio_* functions without CONFIG_GPIOLIB.

However, only a few months later in
b69ac524, CONFIG_GPIOLIB was added
as a dependency, defeating the original purpose of this option.
Instead of that patch, the original commit could have just been
reverted (and in fact was partially so in
403c1d0b). Further, since this
option has a dependency on HAS_IOMEM, even though it does not
require it, it causes build failures when !HAS_IOMEM (e.g. in a
uml build).

Fix that by completely removing the option, in essence completing
the reversion of the original commit.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The nvme_remove function tears down all allocated resources in the correct
order, so no need to free queues on error during initialization. This
fixes possible use-after-free errors when queues are still associated
with a blk-mq hctx.
Reported-by: Scott Bauer <scott.bauer@intel.com>
Tested-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>

Pull fuse fixes from Miklos Szeredi:
 "A regression fix and bug fix bound for stable"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix fuse_write_end() if zero bytes were copied
  fuse: fix root dentry initialization

Pull MFD fixes from Lee Jones:
 - Fix PCI properties in intel-lpss-pci
 - Fix Resetting issue during suspend in intel-lpss-pci
 - Seperate IRQs for USBC device and CHRG in intel_soc_pmic_bxtwc
 - Add timeout to fix Resetting issue in stmpe
 - Ensure we 'put' reference to device when done in mfd-core

* tag 'mfd-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: core: Fix device reference leak in mfd_clone_cell
  mfd: stmpe: Fix RESET regression on STMPE2401
  mfd: intel_soc_pmic_bxtwc: Fix usbc interrupt
  mfd: intel-lpss: Do not put device in reset state on suspend
  mfd: lpss: Fix Intel Kaby Lake PCH-H properties