In the future we may support two different channel sets:
- one which includes the voltage pads and the temperature sensor output
  (for Meson8, Meson8b and Meson8m2)
- one which only includes the voltage pads (GXBB, GXL, GXM and AXG)

Channel 7 has a special function on all of these platforms. However,
since we will have different channel array definitions we want our code
to always use whatever channels struct iio_dev uses.

No functional changes for now. This is the preparation for adding
temperature sensor support to this driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.

Fixes: 0e589d5f ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

When doing simple conversions, the driver did not acknowledge the DRDY irq.
If this irq status is not acked, it will be left pending, and as soon as a
trigger is enabled, the irq handler will be called, it doesn't know why
this status has occurred because no channel is pending, and then it will go
int a irq loop and board will hang.
To avoid this situation, read the LCDR after a raw conversion is done.

Fixes: 0e589d5f ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Commit 053ffe3c ("iio: adc: meson-saradc: squash and share the
common adc platform data") put all the data which is needed at runtime
from struct meson_sar_adc_data to a new struct meson_sar_adc_param so
we can re-use the platform specific configuration without having to
duplicate everything just to change the name.

The only place where struct meson_sar_adc_data is now needed is the
_probe function which has to pass the name to the iio_dev. All other
functions only need access to struct meson_sar_adc_param. This means we
can simplify struct meson_sar_adc_priv.

The goal of this patch is to make the code a bit easier to read since
this removes one level of nesting. No functional changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This simplifies our _probe function by using of_device_get_match_data
instead of open-coding it. No functional changes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This define is of no use because the driver is avoiding shifting bits
by itself but using FIELD_GET/FIELD_PREP (which are using bit masks)
instead. There is already a MESON_SAR_ADC_DELTA_10_TS_C_MASK bit mask so
MESON_SAR_ADC_DELTA_10_TS_C_SHIFT was redundant.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add device tree support for ROHM BH1750 series ambient light sensors.
Signed-off-by: ryang <decatf@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Document device tree bindings for ROHM BH1750 ambient light sensor driver.
Signed-off-by: ryang <decatf@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for the AD7605-4 to the AD7606 driver. The AD7605-4 is mostly
interface compatible to the AD7606-6 with the only difference being not
having support for oversampling.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This driver was originally written by ST in 2016 as a misc input device
driver, and hasn't been maintained for a long time. I grabbed some code
from it's API and reformed it into an iio proximity device driver.
This version of driver uses i2c bus to talk to the sensor and
polling for measuring completes, so no irq line is needed.
It can be tested with reading from
/sys/bus/iio/devices/iio:deviceX/in_distance_input
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The current structs are only partially documented via annotations. This
change updates annotations for all structs in the ad7606.h file.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Replace 'hcm5843' with 'hmc5843'.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Leaving for_each_child_of_node loop we should release child device node,
if it is not stored for future use.

Found by Linux Driver Verification project (linuxtesting.org).

JC: I'm not sending this as a quick fix as it's been wrong for years,
but good to pick up for stable after the merge window.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 6df2e98c ("iio: adc: Add imx25-gcq ADC driver")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This changes how the SPI message for the triggered buffer is setup in
the TI ADS7950 A/DC driver. By using the SPI_CS_WORD flag, we can read
multiple samples in a single SPI transfer. If the SPI controller
supports DMA transfers, we can see a significant reduction in CPU usage.

For example, on an ARM9 system running at 456MHz reading just 4 channels
at 100Hz: before this change, top shows the CPU usage of the IRQ thread
of this driver to be ~7.7%. After this change, the CPU usage drops to
~3.8%.

The use of big-endian for the raw data was cargo culted from another
driver when this driver was originally written. It used an SPI word size
of 8 bits and big-endian byte ordering to effectively emulate 16 bit
words.

Now, in order to inject a CS toggle between each word, we need to use
the correct word size, otherwise we would get a CS toggle half way
through each word 16-bit. The SPI subsystem uses CPU byte ordering for
multi-byte words. So, the data we get back from the SPI is going to be
CPU endian now no matter what. Converting that to big endian will just
add overhead on little endian systems so we opt to change the raw data
format from big endian to CPU endian.

There is a small risk that this could break some lazy userspace programs
that use the raw data without checking the data format. We can address
this if/when it actually comes up.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

spi: Provide SPI_CS_WORD

This provides a SPI operation mode which changes chip select after every
word, used by some devices such as ADCs and DACs.

This adds a default software implementation for the SPI_CS_WORD flag for
controllers that don't have such a feature.

The SPI_CS_WORD flag indicates that the CS line should be toggled
between each word sent, not just between each transfer. The
implementation works by using existing functions to split transfers into
one-word-sized transfers and sets the cs_change bit for each of the
new transfers.
Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This adds a new SPI mode flag, SPI_CS_WORD, that is used to indicate
that a SPI device requires the chip select to be toggled after each
word that is transferred.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The ad7606_chip_info struct does not have the lock & name fields. Remove
the kernel documentation annotations for it.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fixes commit 17be2a29 ("staging: iio:
ad7606: replace range/range_available with corresponding scale").

The AD7606 devices don't have a 2.5V voltage range, they have 5V & 10V
voltage range, which is selectable via the `gpio_range` descriptor.

The scales also seem to have been miscomputed, because when they were
applied to the raw values, the results differ from the expected values.
After checking the ADC transfer function in the datasheet, these were
re-computed.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Even though I did introduce the fbtft code in staging a while ago to
stop seeing this being developed out-of-tree, I don't intend to
maintain it, and I don't use it actively. So be honest and remove
myself from the MAINTAINERS file for this subsystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

WARN_ON() already contains an unlikely(), so it's not necessary to
wrap it into another.
Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform_driver_register will set the .owner field. So it is safe
to remove the redundant assignment.

The issue is detected with the help of Coccinelle.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the pointer wilc is being null checked several times
and yet not checked for the final workqueue flush and destroy
(which can lead to a null pointer dereference if wilc is null);
these missing null checks were overlooked in an earlier core
refactoring commit.

Clean up the code by checking wilc at the start and bailing out
early if it is null allowing the subsequent null checks to be
removed, this also fixes the potential null pointer deferences
on the workqueue flush and destroy calls.

Detected by CoverityScan, CID#1473305 ("Dereference after null check")

Fixes: b3ee105c ("staging: wilc1000: refactor code to move initilization in wilc_netdev_init()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st round of IIO new device support, features and cleanups in the 4.20 cycle.

There is a merge commit in here to pull in regmap support for repeatedly
reading the same register (to read out FIFOs).  Used by the adxl372 driver.
This will find uses elsewhere once we tidy up various drivers that are
effectively doing this and relying on not enabling regcache.

New device support
* Analog devices ADXL372 accelerometer
  - new driver for this accelerometer including fifo and and interrupt support.
    Follow up patches enforce trigger validation, add sampling frequency
    control and filter bandwidth control.  A later series added i2c support
    to the existing SPI support.
* ST lsm6dsx
  - rework and add support fo the LSM6DSO 6 axis mems sensor.
* Linear LTC 1660 DAC
  - new driver supporting the LTC 1660 and LTC 1665 SPI DACs.
* Microchip mcp3911 ADC.
  - new driver for this integrated analog front end and ADC.
* Qualcomm SPMI PMIC5 adc driver
  - using the spmi framework, new driver and bindings for this ADC.
    Follow up patch adds some missing channels.

Features
* ad5758
  - support hard reset using a gpio (if provided).
* mpu6050
  - Regulator support
* qcom-spmi-adc5
  - Sanity check the channel numbers provided by DT to make sure the
    driver actually knows about them.
* sc27xx
  - give raw data for channel 20 as it's used on all known boards for
    the headset which needs a custom converstion function.  If it turns
    out someone builds a board where this isn't true we will deal with it
    when it happens.
  - add ADC scale calibration.
* tsl2772
  - support device tree binding to set the proximity led settings.
  - regulator supprot.
  - binding for apds9930 - trivial addition as register compatible with tsl2772.

Cleanups / Minor fixes

* adxl345
  - supress a static checker warning but explicitly checking if the id
    object is null.
* bh1750
  - avoid CONFIG_PM_SLEEP checks.
  - SPDX.
* bme680
  - spelling mistake
  - use clamp rather than open coding.
  - white space and other similar fixes.
  - rename MSK to MASK for clarifty and use GENMASK to specify them.
  - use the FIELD_GET macro rather than a very odd accessor of dividing by
    16 to get the shift.
  - rework to share handing for oversampling of the various channels in a
    unified way.
  - check explicitly for val2 in write_raw function to ensure it is 0.
  - drop some field defines that don't add anything.
* dpot-adc
  - SPDX
* envelope detector
  - SPDX
* isl29501
  - fix an ancient compiler warning mostly because it results in much
    nicer code.
* max30102
  - mark switch fall throughs.
* max44000
  - drop an unused variable.
* max512
  - avoid CONFIG_PM_SLEEP checks.
* max5481
  - use of_device_get_match_data rather than open coding it.
* max5821
  - avoid CONFIG_PM_SLEEP checks.
* max9611
  - explicity cast an enum to an integer to make it totally clear that
    this is intended.
* mcp4018
  - fix an inconsistent MODULE_LICENSE.
  - use of_device_get_match_data rather than open coding it.
* mcp4531
  - use of_device_get_match_data rather than open coding it.
  - SPDX
* mcp4725
  - avoid CONFIG_PM_SLEEP checks.
* mcp4922
  - Fix error handling and prevent writing a negative to when setting the
    output voltage.
* ms5611
  - drop deprecated compatible strings without manufacturer from being
    explicitly listed.  They are handled anyway.
  - SPDX
* multiplexer
  - SPDX
* qcom-vadc
  - fix inconsistent documentation for reg.
* ti-dac5571
  - provide and of_match_table.

* treewide
  - update Michael Hennerich's email address.
  - Use %pOFn rather than device_node.name.
* documentation.
  - tidy up a wrong kernel version for the introduction of the
    position_relative ABI.

It's a little bit strange when fault_injection related
option fail with -EINVAL which was already disabled
from config, so surround all fault_injection related option
parsing code using CONFIG_EROFS_FAULT_INJECTION. Meanwhile,
slightly change warning message to keep consistency with
option POSIX_ACL and FS_XATTR.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix coding style issue "Prefer 'unsigned int' to bare use of 'unsigned'"
detected by checkpatch.pl.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The the last two parameters of write_cam() have type u8.
Change the type of the passed arrays from unsigned char to u8.
Clears a line over 80 characters checkpatch warning.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Wrap lines over 80 characters where appropriate to
clear checkpatch warnings.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parentheses from conditionals.
Also clears 'Alignment should match open parenthesis'
checkpatch issue.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor switch cases in SwLedControlMode1() to reduce
indentation level. Also clears line over 80 characters
checkpatch warnings.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup to remove handle_hif_exit_work(), as after code refactoring its
not required anymore.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor the wilc_netdev_init() to cleanup the memory for error
scenario and remove unnecessary 'dev' pointer check.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor code to move the initialization of wilc related parameters in
wilc_netdev_init() and move their deinitialization in
wilc_netdev_cleanup(). For 'hif_workqueue' creation 'clients_count' check
is not required as the single instance is maintained.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the use of unnecessary static variable 'p2p_listen_state'.
Already 'p2p_listen_state' is present in 'wilc_priv' struct. So making
use of that variable as its getting set in channel ready and
remain on channel expired callback.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move static variable 'wilc_connecting' as part of 'wilc_vif' private
struct. Remove "wilc_" prefix from name as its already part of wilc_vif
struct.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the static variable as part of 'wilc' priv struct.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup code to remove the variables related to setting and getting IP
address as this case was not handled from firmware side.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use short variable names to avoid line over 80 chars checkpatch warning
in tcp_process().

struct pending_acks_info     --> struct pending_ack
int tcp_pending_ack_idx      --> int ack_idx
u32 pending_ack              --> u32 pending_ack_idx
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to avoid line over 80 chars checkpatch issue introduced in
previous code refactor commit.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid use of static variables and move them as part of wilc_vif struct.
Move all the parameters related to tcp_ack_filter algo to wilc_vif
struct.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>