There are certain places where the code uses .set mips32 or .set mips64
or .set arch=r4000. In preparation of MIPS R6 support, and in order to
use as less #ifdefs as possible, we define new macros to set similar
annotations for MIPS R6.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 defines new opcodes for ll, sc, cache and pref instructions
so we need to take these into consideration in the micro-assembler.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 redefines several instructions and reduces the immediate
field to 9-bits so add related macros for the microassembler.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Add build support for the latest revision (R6) of the MIPS ISA.
microMIPS is not yet supported.

Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00386.html
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Add a case in cpu_probe_mips for the MIPS generic QEMU processor ID.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Add a CPU_QEMU_GENERIC case to various switch statements.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Latest versions of QEMU added support for mips32r6-generic and
mips64r6-generic cpu types so add related definitions in preparation
of MIPS R6 support. This is also used for QEMU R2 generic cpus.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

We need to check the ASEs support against the core's CFLAGS instead
of depending to the default -march option from the toolchain.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9180/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

activate_mm() and switch_mm() call get_new_mmu_context() which in turn
can enable the HTW before the entryhi is changed with the new ASID.
Since the latter will enable the HTW in local_flush_tlb_all(),
then there is a small timing window where the HTW is running with the
new ASID but with an old pgd since the TLBMISS_HANDLER_SETUP_PGD
hasn't assigned a new one yet. In order to prevent that, we introduce a
simple htw counter to avoid starting HTW accidentally due to nested
htw_{start,stop}() sequences. Moreover, since various IPI calls can
enforce TLB flushing operations on a different core, such an operation
may interrupt another htw_{stop,start} in progress leading inconsistent
updates of the htw_seq variable. In order to avoid that, we disable the
interrupts whenever we update that variable.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # 3.17+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9118/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Whenever we modify a page table entry, we need to ensure that the HTW
will not fetch a stable entry. And for that to happen we need to ensure
that HTW is stopped before we modify the said entry otherwise the HTW
may already be in the process of reading that entry and fetching the
old information. As a result of which, we replace the htw_reset() calls
with htw_{stop,start} in more appropriate places. This also removes the
remaining users of htw_reset() and as a result we drop that macro
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # 3.17+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9116/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When we use htw_{start,stop}() outside of htw_reset(), we need
to ensure that c0 changes have been propagated properly before
we attempt to continue with subsequence memory operations.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # 3.17+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9114/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit 41c594ab ("[MIPS] MT: Improved multithreading support.")
removed useful debug information for userland segmentation faults.
This patch bring this back along with the ability to determine the
name of the object file where the EPC and RA registers point at.
Furthermore, we select the SYSCTL_EXCEPTION_TRACE symbol for MIPS
which is the de facto solution to turn userland exception logging
on and off via the /proc/sys/debug/exception-trace file.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9089/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Userland code may be built using an ABI which permits linking to objects
that have more restrictive floating point requirements. For example,
userland code may be built to target the O32 FPXX ABI. Such code may be
linked with other FPXX code, or code built for either one of the more
restrictive FP32 or FP64. When linking with more restrictive code, the
overall requirement of the process becomes that of the more restrictive
code. The kernel has no way to know in advance which mode the process
will need to be executed in, and indeed it may need to change during
execution. The dynamic loader is the only code which will know the
overall required mode, and so it needs to have a means to instruct the
kernel to switch the FP mode of the process.

This patch introduces 2 new options to the prctl syscall which provide
such a capability. The FP mode of the process is represented as a
simple bitmask combining a number of mode bits mirroring those present
in the hardware. Userland can either retrieve the current FP mode of
the process:

  mode = prctl(PR_GET_FP_MODE);

or modify the current FP mode of the process:

  err = prctl(PR_SET_FP_MODE, new_mode);
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8899/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The cevt-r4k driver used to call into the GIC driver to find whether the
timer was pending, but only with External Interrupt Controller (EIC)
mode, where the Cause.IP bits can't be used as they encode the interrupt
priority level (Cause.RIPL) instead.

However commit e9de688d ("irqchip: mips-gic: Support local
interrupts") changed the condition from cpu_has_veic to gic_present.
This fails on cores such as P5600 which have a GIC but the local
interrupts aren't routable by the GIC, causing c0_compare_int_usable()
to consider the interrupt unusable so r4k_clockevent_init() fails.

The previous behaviour, added in commit 98b67c37 ("MIPS: Add EIC
support for GIC."), wasn't really correct either as far as I can tell,
since P5600 apparently supports EIC mode too, and in any case the use of
Cause.TI with r2 should have been sufficient anyway since commit
010c108d ("MIPS: PowerTV: Fix support for timer interrupts with > 64
external IRQs").

Therefore drop the call into the gic driver altogether, and add a
comment in c0_compare_int_pending() to clarify that Cause.TI does get
checked since MIPS r2.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Fixes: e9de688d ("irqchip: mips-gic: Support local interrupts")
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven J. Hill <steven.hill@imgtec.com>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9077/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

  HOSTCC  arch/mips/boot/elf2ecoff
arch/mips/boot/elf2ecoff.c: In function ‘main’:
arch/mips/boot/elf2ecoff.c:271:8: warning: variable ‘shstrtab’ set but not used [-Wunused-but-set-variable]
  char *shstrtab;
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Some instances of pci_ops initialization rely on the read/write members'
location in the struct. This is fragile and may break when adding new
members to the beginning of the struct.

[ralf@linux-mips.org: indent = with tabs for consistency.]
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Patchwork: https://patchwork.linux-mips.org/patch/8915/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8928/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Its implementation is identical to MIPS.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Right now the MIPS <asm/checksum.h> still overrides all functions.  This
will change in the future.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This isn't only short and easier to read and fully portable but also
shrinks a Malta kernel's by 160 bytes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull ARM fixes from Russell King:
 "Three small fixes from over the Christmas period, and wiring up the
  new execveat syscall for ARM"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error
  ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region
  ARM: 8249/1: mm: dump: don't skip regions
  ARM: wire up execveat syscall

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix
  with certain odd memory mappings"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, vdso: Use asm volatile in __getcpu
  x86/build: Clean auto-generated processor feature files
  x86: Fix mkcapflags.sh bash-ism
  x86: Fix step size adjustment during initial memory mapping
  x86_64, vdso: Fix the vdso address randomization algorithm

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: group scheduling corner case fix, two deadline scheduler
  fixes, effective_load() overflow fix, nested sleep fix, 6144 CPUs
  system fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group()
  sched/deadline: Avoid double-accounting in case of missed deadlines
  sched/deadline: Fix migration of SCHED_DEADLINE tasks
  sched: Fix odd values in effective_load() calculations
  sched, fanotify: Deal with nested sleeps
  sched: Fix KMALLOC_MAX_SIZE overflow during cpumask allocation

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also some kernel side fixes: uncore PMU
  driver fix, user regs sampling fix and an instruction decoder fix that
  unbreaks PEBS precise sampling"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes
  perf/x86_64: Improve user regs sampling
  perf: Move task_pt_regs sampling into arch code
  x86: Fix off-by-one in instruction decoder
  perf hists browser: Fix segfault when showing callchain
  perf callchain: Free callchains when hist entries are deleted
  perf hists: Fix children sort key behavior
  perf diff: Fix to sort by baseline field by default
  perf list: Fix --raw-dump option
  perf probe: Fix crash in dwarf_getcfi_elf
  perf probe: Fix to fall back to find probe point in symbols
  perf callchain: Append callchains only when requested
  perf ui/tui: Print backtrace symbols when segfault occurs
  perf report: Show progress bar for output resorting

Pull locking fixes from Ingo Molnar:
 "A liblockdep fix and a mutex_unlock() mutex-debugging fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Always clear owner field upon mutex_unlock()
  tools/liblockdep: Fix debug_check thinko in mutex destroy

Fix for BUG_ON(anon_vma->degree) splashes in unlink_anon_vmas() ("kernel
BUG at mm/rmap.c:399!") caused by commit 7a3ef208 ("mm: prevent
endless growth of anon_vma hierarchy")

Anon_vma_clone() is usually called for a copy of source vma in
destination argument.  If source vma has anon_vma it should be already
in dst->anon_vma.  NULL in dst->anon_vma is used as a sign that it's
called from anon_vma_fork().  In this case anon_vma_clone() finds
anon_vma for reusing.

Vma_adjust() calls it differently and this breaks anon_vma reusing
logic: anon_vma_clone() links vma to old anon_vma and updates degree
counters but vma_adjust() overrides vma->anon_vma right after that.  As
a result final unlink_anon_vmas() decrements degree for wrong anon_vma.

This patch assigns ->anon_vma before calling anon_vma_clone().
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-and-tested-by: Chris Clayton <chris2553@googlemail.com>
Reported-and-tested-by: Oded Gabbay <oded.gabbay@amd.com>
Reported-and-tested-by: Chih-Wei Huang <cwhuang@android-x86.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Forrest <dan.forrest@ssec.wisc.edu>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org  # to match back-porting of 7a3ef208Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit fee7e49d ("mm: propagate error from stack expansion even for
guard page") made sure that we return the error properly for stack
growth conditions.  It also theorized that counting the guard page
towards the stack limit might break something, but also said "Let's see
if anybody notices".

Somebody did notice.  Apparently android-x86 sets the stack limit very
close to the limit indeed, and including the guard page in the rlimit
check causes the android 'zygote' process problems.

So this adds the (fairly trivial) code to make the stack rlimit check be
against the actual real stack size, rather than the size of the vma that
includes the guard page.
Reported-and-tested-by: Chih-Wei Huang <cwhuang@android-x86.org>
Cc: Jay Foad <jay.foad@gmail.com>
Cc: stable@kernel.org  # to match back-porting of fee7e49dSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull VFIO fix from Alex Williamson:
 "Fix PCI header check in vfio_pci_probe() (Wei Yang)"

* tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Fix the check on pci device type in vfio_pci_probe()

Pull SCSI fix from James Bottomley:
 "Just one fix: a qlogic busy wait regression"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  qla2xxx: fix busy wait regression

Pull sound fixes from Takashi Iwai:
 "All a few small regression or stable fixes: a Nvidia HDMI ID addition,
  a regression fix for CAIAQ stream count, a typo fix for GPIO setup
  with STAC/IDT HD-audio codecs, and a Fireworks big-endian fix"

* tag 'sound-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: fireworks: fix an endianness bug for transaction length
  ALSA: hda - Add new GPU codec ID 0x10de0072 to snd-hda
  ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs
  ALSA: snd-usb-caiaq: fix stream count check

Pull HID updates from Jiri Kosina:

 - bounds checking fixes in logitech and roccat drivers, from Peter Wu
   and Dan Carpenter

 - double-kfree fix in i2c-hid driver on bus shutdown, from Mika
   Westerberg

 - a couple of various small driver fixes

 - a few device id additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: roccat: potential out of bounds in pyra_sysfs_write_settings()
  HID: Add a new id 0x501a for Genius MousePen i608X
  HID: logitech-hidpp: prefix the name with "Logitech"
  HID: logitech-hidpp: avoid unintended fall-through
  HID: Allow HID_BATTERY_STRENGTH to be enabled
  HID: i2c-hid: Do not free buffers in i2c_hid_stop()
  HID: add battery quirk for USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO keyboard
  HID: logitech-hidpp: check WTP report length
  HID: logitech-dj: check report length

Pull drm fixes from Dave Airlie:
 "I'm briefly working between holidays and LCA, so this is close to a
  couple of weeks of fixes,

  Two sets of amdkfd fixes, this is a new feature this kernel, and this
  pull fixes a few issues since it got merged, ordering when built-in to
  kernel and also the iommu vs gpu ordering patch, it also reworks the
  ioctl before the initial release.

  Otherwise:
   - radeon: some misc fixes all over, hdmi, 4k, dpm
   - nouveau: mcp77 init fixes, oops fix, bug on fix, msi fix
   - i915: power fixes, revert VGACNTR patch

  Probably be quiteer next week since I'll be at LCA anyways"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits)
  drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl()
  drm/amdkfd: reformat IOCTL definitions to drm-style
  drm/amdkfd: Do copy_to/from_user in general kfd_ioctl()
  drm/radeon: integer underflow in radeon_cp_dispatch_texture()
  drm/radeon: adjust default bapm settings for KV
  drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw
  drm/radeon: fix sad_count check for dce3
  drm/radeon: KV has three PPLLs (v2)
  drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS)
  drm/radeon: Init amdkfd only if it was compiled
  amdkfd: actually allocate longs for the pasid bitmask
  drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP
  drm/nv4c/mc: disable msi
  drm/nouveau/fb/ram/mcp77: enable NISO poller
  drm/nouveau/fb/ram/mcp77: use carveout reg to determine size
  drm/nouveau/fb/ram/mcp77: subclass nouveau_ram
  drm/nouveau: wake up the card if necessary during gem callbacks
  drm/nouveau/device: Add support for GK208B, resolves bug 86935
  drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate
  drm/nouveau/bios: fix oops on pre-nv50 chipsets
  ...

Pull arm64 fixes from Will Deacon:
 "Here is a handful of minor arm64 fixes discovered and fixed over the
  Christmas break.  The main part is adding some missing #includes that
  we seem to be getting transitively but have started causing problems
  in -next.

   - Fix early mapping fixmap corruption by EFI runtime services
   - Fix __NR_compat_syscalls off-by-one
   - Add missing sanity checks for some 32-bit registers
   - Add some missing #includes which we get transitively
   - Remove unused prepare_to_copy() macro"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/efi: add missing call to early_ioremap_reset()
  arm64: fix missing asm/io.h include in kernel/smp_spin_table.c
  arm64: fix missing asm/alternative.h include in kernel/module.c
  arm64: fix missing linux/bug.h include in asm/arch_timer.h
  arm64: fix missing asm/pgtable-hwdef.h include in asm/processor.h
  arm64: sanity checks: add missing AArch32 registers
  arm64: Remove unused prepare_to_copy()
  arm64: Correct __NR_compat_syscalls for bpf