- 20 Oct, 2015 16 commits
-
-
Antti Palosaari authored
Add documentation for V4L SDR transmitter (output) devices. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
New IOCTL ops: vidioc_enum_fmt_sdr_out vidioc_g_fmt_sdr_out vidioc_s_fmt_sdr_out vidioc_try_fmt_sdr_out New vb2 buffertype: V4L2_BUF_TYPE_SDR_OUTPUT New v4l2 capability: V4L2_CAP_SDR_OUTPUT Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Add brief description for tuner RF gain control. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Add new RF tuner gain control named RF Gain. That is aimed for first amplifier chip right after antenna connector. There is existing LNA Gain control, which is quite same, but it is aimed for cases amplifier is integrated to tuner chip. Some designs have both, as almost all recent tuner silicons has integrated LNA/RF amplifier in any case. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
SDR receiver has ADC (Analog-to-Digital Converter) and SDR transmitter has DAC (Digital-to-Analog Converter). Originally I though it could be good idea to have own type for receiver and transmitter, but now I feel one common type for SDR is enough. So lets rename it. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: this was added in 4.4, so update 4.2 to 4.4] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Salva Peiró authored
The vivid_fb_ioctl() code fails to initialize the 16 _reserved bytes of struct fb_vblank after the ->hcount member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Salva Peiró <speirofr@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Junghak Sung authored
Move v4l2-specific stuff from videobu2-core to videobuf2-v4l2 without doing any functional changes. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Junghak Sung authored
Prepare to divide videobuf2 - Separate vb2 trace events from v4l2 trace event. - Make wrapper functions that will move to v4l2-side. - Make vb2_core_* functions that will remain in core-side. - Add a callback function table for buffer operation which makes vb2-core to be able to invoke a v4l2-side functions. - Rename internal functions as vb2_*. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Junghak Sung authored
Simple changes that replace v4l2-specific data with vb2 data in videobuf2-core. enum v4l2_buf_type --> int enum v4l2_memory --> enum vb2_memory VIDEO_MAX_FRAME --> VB2_MAX_FRAME VIDEO_MAX_PLANES --> VB2_MAX_PLANES struct v4l2_fh *owner --> void *owner V4L2_TYPE_IS_MULTIPLANAR() --> is_multiplanar V4L2_TYPE_IS_OUTPUT() --> is_output Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Junghak Sung authored
Replace struct v4l2_format * with void * to make queue_setup() for common use. And then, modify all device drivers related with this change. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix missing const in fimc-lite.c] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Andrzej Hajda authored
MFC driver never delivered EOS event to apps feeding constantly its capture buffer with fresh buffers. The patch fixes it by marking last buffers returned by MFC with MFC_BUF_FLAG_EOS flag and firing EOS event on de-queuing such buffers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Andrzej Hajda authored
MFC encoder supports end-of-stream handling for encoder in version 5 of hardware. This patch adds it also for newer version. It was successfully tested on MFC-v8. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Ingi Kim authored
This patch fixes spelling errors in mfc encoder. inavild -> invaild Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Tiffany Lin authored
In videobuf2 dma-sg memory types the prepare and finish ops, instead of passing the number of entries in the original scatterlist as the "nents" parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(), the value returned by dma_map_sg() was used. Albeit this has been suggested in comments of some implementations (which have since been corrected), this is wrong. Fixes: d790b7ed ("vb2-dma-sg: move dma_(un)map_sg here") Cc: stable@vger.kernel.org # for v3.19 and up Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Tiffany Lin authored
In videobuf2 dma-contig memory type the prepare and finish ops, instead of passing the number of entries in the original scatterlist as the "nents" parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(), the value returned by dma_map_sg() was used. Albeit this has been suggested in comments of some implementations (which have since been corrected), this is wrong. Fixes: 199d101e ("v4l: vb2-dma-contig: add prepare/finish to dma-contig allocator") Cc: stable@vger.kernel.org # for v3.8 and up Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Javier Martinez Canillas authored
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So technically there's no need for a driver to export the OF table since currently it's not used. In fact, the I2C device ID table is mandatory for I2C drivers since a i2c_device_id is passed to the driver's probe function even if the I2C core used the OF table to match the driver. And since the I2C core uses different tables, OF-only drivers needs to have duplicated data that has to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. To avoid the above, the I2C core behavior may be changed in the future to not require an I2C device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table to prevent breaking module autoloading if that happens. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 10 Oct, 2015 10 commits
-
-
Mauro Carvalho Chehab authored
Now that the Demux kABI is documented at device-drivers.xml, remove it from the API docbook. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
There are several stuff at media's kdapi.xml that don't belong there, as it documents the Kernel internal ABI, and not the userspace API. Add the documentation here. The hole kdapi.xml will be removed on a latter patch, after we finish documenting what's there at the proper places. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
While we can't document #defines, documenting enums are well supported by kernel-doc. So, convert the bitmap defines into an enum. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The usage of #define at the kABI is fine, but it doesn't allow adding a proper description. As those defines deserve a proper documentation, let's convert them into an enum and document them at device-drivers DocBook. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The dvb/kdapi.tmpl has already an extensive documentation about this callback. Now that we've added function typedefs at kernel-doc, add such documentation at demux.h, for it to appear at device-drivers DocBook. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The dvb/kdapi.tmpl has already an extensive documentation about this callback. Now that we've added function typedefs at kernel-doc, add such documentation at demux.h, for it to appear at device-drivers DocBook. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
A typedef function looks more likely a function and not a normal typedef. Change the code to use the output_function_*, in order to properly parse the function prototype parameters. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The current typedef parser only works for non-function typedefs. As we need to also document some function typedefs, add a parser for it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
There are lots of CodingStyle violations here. Now that we're touching a log on this header files, adding the documentation here, make sure that this will follow the Kernel CodingStyle. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Document the following data types: struct dmx_ts_feed struct dmx_section_filter struct dmx_section_feed enum dmx_frontend_source struct dmx_frontend Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 07 Oct, 2015 1 commit
-
-
Mauro Carvalho Chehab authored
The DVB core has a provision for other frontend sources, but no drivers use it. The kdapi.xml contains provision for some other frontend source types, but it is not in sync with the code. So, remove the unused types and sync both files. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 06 Oct, 2015 7 commits
-
-
Mauro Carvalho Chehab authored
This enum is not actually used anymore. The only value used from the enum is DMX_OK, passed as a parameter on two callbacks. Yet, this value is not used anywhere. So, just remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
There are two callbacks still not documented: .//drivers/media/dvb-core/demux.h:422: warning: No description found for parameter 'get_pes_pids' .//drivers/media/dvb-core/demux.h:422: warning: No description found for parameter 'get_stc' The purpose of first one is clear. The second one is used only on the obsolete av7110 driver, and its purpose is not clear, as it just returns a 64-bit word from the firmware to userspace. Let's document get_pes_pids and mark get_stc as private, adding a comment to not use it, while this is not documented. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
There are two DVB demux callbacks and ioctls that aren't documented and aren't used at all by the DVB core or by any DVB driver upstream. Let's comment out the code for those two ioctls and remove on some future version. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
There are a few inconsistencies between the old documentation that got imported into the header and the current status. Update them, and use the proper doc-nano nomenclature for struct artuments "@", instead of foo(). Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The DocBook/media/dvb/kdapi.xml contains the description of the kABI for DVB. The problem is that, by being maintained on a separate file and not being updated for years, it got outdated. So, for example, some callback parameters were changed, but the DocBook were still using the old stuff. As a first step to fix it, let's move the documentation of struct dmx_demux into demux.h and fix the parameters used there. For now, don't document any other field nor touch the descriptions that got moved, letting this job to other patches. That makes easier to review the patch. PS.: Please notice that an additional patch will be needed in order to fix the return values (some uses non-existent return codes) and to the functions and callbacks mentioned at the descriptions. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
There are several CodingStyle violations at the DVB code. While we won't be fixing them as a hole, let's fix at least the headers, as we're touching on them already in order to properly document them. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
This struct is already documented at the header file, but it is not using Kernel doc-nano format. Convert to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 05 Oct, 2015 6 commits
-
-
Mauro Carvalho Chehab authored
Remove warnings about bad whitespacing at function struct parameters. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The struct lirc_driver is already documented, but on some internal format. Convert it to Kernel doc-nano format and add documentation for some additional parameters that are also present at the structure. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
This header declares the code and structures used to parse Hauppauge eeproms. As this is part of the V4L2 common, and used by several drivers, let's properly document it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The digitizer* fields aren't used. Remove them. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The tuner-types.h is part of the V4L2 core and should be touched for every new tuner added. So, it deserves to be documented at the device-drivers DocBook. Add it to device-drivers.tmpl and add descriptions for enum param_type and struct tuner_range. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The struct tuner_params is almost fully documented, but using a non-standard way. Convert it to doc-nano format, and add descriptions for the parameters that aren't documented yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-