- 09 Dec, 2014 40 commits
-
-
Shannon Nelson authored
The NVM update operations take time finish asynchronously, and follow-on update requests need to wait for the current one to finish. Early firmware didn't handle this well, so the code had to track the busy state. The released firmware handles the busy state correctly, returning I40E_AQ_RC_EBUSY if an update is still in progress, so the code no longer needs to track this. Change-ID: I6e6b4adc26d6dcc5fd7adfee5763423858a7d921 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Acked-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Jim Young <jamesx.m.young@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Add more detail to the NVM update error messages so folks have a better chance at diagnosing issues without having to resort to heroic measures to reproduce an issue. Change-ID: I270d1a9c903baceaef0bebcc55d29108ac08b0bd Signed-off-by:
-
Shannon Nelson authored
Once in a great while the NVMUpdate tools and the driver get out of phase with each other. This gives us a way to reset things without having to unload the driver. Change-ID: I353f688236249a666a90ba3e7233e0ed8c1a04e9 Signed-off-by:
-
Andreas Ruprecht authored
In a configuration with CONFIG_BRIDGE set to 'm' and CONFIG_ROCKER set to 'y', undefined references occur at link time: > drivers/built-in.o: In function `rocker_port_fdb_learn_work': > /home/jim/linux/drivers/net/ethernet/rocker/rocker.c:3014: undefined > reference to `br_fdb_external_learn_del' > /home/jim/linux/drivers/net/ethernet/rocker/rocker.c:3016: undefined > reference to `br_fdb_external_learn_add' This patch fixes these by declaring CONFIG_ROCKER as being dependent on CONFIG_BRIDGE. Reported-by:
Jim Davis <jim.epost@gmail.com> Signed-off-by:
Andreas Ruprecht <rupran@einserver.de> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gu Zheng authored
Introduce helper function do_sock_sendmsg() to simplify sock_sendmsg{_nosec}, and replace reduplicate code. Signed-off-by:Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
-
Eric Dumazet authored
In commit 2b4636a5 ("tcp_cubic: make the delay threshold of HyStart less sensitive"), HYSTART_DELAY_MIN was changed to 4 ms. The remaining problem is that using delay_min + (delay_min/16) as the threshold is too sensitive. 6.25 % of variation is too small for rtt above 60 ms, which are not uncommon. Lets use 12.5 % instead (delay_min + (delay_min/8)) Tested: 80 ms RTT between peers, FQ/pacing packet scheduler on sender. 10 bulk transfers of 10 seconds : nstat >/dev/null for i in `seq 1 10` do netperf -H remote -- -k THROUGHPUT | grep THROUGHPUT done nstat | grep Hystart With the 6.25 % threshold : THROUGHPUT=20.66 THROUGHPUT=249.38 THROUGHPUT=254.10 THROUGHPUT=14.94 THROUGHPUT=251.92 THROUGHPUT=237.73 THROUGHPUT=19.18 THROUGHPUT=252.89 THROUGHPUT=21.32 THROUGHPUT=15.58 TcpExtTCPHystartTrainDetect 2 0.0 TcpExtTCPHystartTrainCwnd 4756 0.0 TcpExtTCPHystartDelayDetect 5 0.0 TcpExtTCPHystartDelayCwnd 180 0.0 With the 12.5 % threshold THROUGHPUT=251.09 THROUGHPUT=247.46 THROUGHPUT=250.92 THROUGHPUT=248.91 THROUGHPUT=250.88 THROUGHPUT=249.84 THROUGHPUT=250.51 THROUGHPUT=254.15 THROUGHPUT=250.62 THROUGHPUT=250.89 TcpExtTCPHystartTrainDetect 1 0.0 TcpExtTCPHystartTrainCwnd 3175 0.0 Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Tested-by:
-
Eric Dumazet authored
When deploying FQ pacing, one thing we noticed is that CUBIC Hystart triggers too soon. Having SNMP counters to have an idea of how often the various Hystart methods trigger is useful prior to any modifications. This patch adds SNMP counters tracking, how many time "ack train" or "Delay" based Hystart triggers, and cumulative sum of cwnd at the time Hystart decided to end SS (Slow Start) myhost:~# nstat -a | grep Hystart TcpExtTCPHystartTrainDetect 9 0.0 TcpExtTCPHystartTrainCwnd 20650 0.0 TcpExtTCPHystartDelayDetect 10 0.0 TcpExtTCPHystartDelayCwnd 360 0.0 -> Train detection was triggered 9 times, and average cwnd was 20650/9=2294, Delay detection was triggered 10 times and average cwnd was 36 Signed-off-by:
-
Joe Perches authored
Let the compiler decide instead. No change in object size x86-64 -O2 no profiling Signed-off-by:
Joe Perches <joe@perches.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Joe Perches authored
Use the (1 << reg) & mask trick to reduce code size. x86-64 size difference -O2 without profiling for various gcc versions: $ size arch/x86/net/bpf_jit_comp.o* text data bss dec hex filename 9266 4 0 9270 2436 arch/x86/net/bpf_jit_comp.o.4.4.new 10042 4 0 10046 273e arch/x86/net/bpf_jit_comp.o.4.4.old 9109 4 0 9113 2399 arch/x86/net/bpf_jit_comp.o.4.6.new 9717 4 0 9721 25f9 arch/x86/net/bpf_jit_comp.o.4.6.old 8789 4 0 8793 2259 arch/x86/net/bpf_jit_comp.o.4.7.new 10245 4 0 10249 2809 arch/x86/net/bpf_jit_comp.o.4.7.old 9671 4 0 9675 25cb arch/x86/net/bpf_jit_comp.o.4.9.new 10679 4 0 10683 29bb arch/x86/net/bpf_jit_comp.o.4.9.old Signed-off-by:
-
Jiri Pirko authored
It is never called and implementations are void. So just remove it. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Yuval Mintz authored
Our FW can support several fastpath HSI [for backward compatibility] but up until now VFs were always configured to use latest fastpath HSI [although VF driver might be older and use an older fastpath HSI]. For linux drivers, the differences are insignificant since driver never utilized features that were overridden by the HSI change. But for VMs running other operating systems this might be a problem. In addition, eventually FW might change fastpath HSI in such a manner that backward compatibility WILL break unless configured with proper version. This patch fixes the issue for other operating system VMs, as well as lays the ground work for forward compatibility in regard to the fastpath HSI. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
Rasmus Villemoes authored
The comment says that the built-in strncmp didn't work. That is not surprising, as apparently "str" semantics are not really what is wanted (hint: de4x5_strncmp only stops when two different bytes are encountered or the end is reached; not if either byte happens to be 0). de4x5_strncmp is actually a memcmp (except for the signature and that bytes are not necessarily treated as unsigned char); since only the boolean value of the result is used we can just replace de4x5_strncmp with memcmp. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
Lokesh Vutla authored
CPSW is present in AM33xx, AM43xx, DRA7xx. Updating the Kconfig to depend on ARCH_OMAP2PLUS instead of listing all SoC's. Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Acked-by:
Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Erik Hugne authored
commit 908344cd ("tipc: fix bug in multicast congestion handling") introduced two bugs with the bclink wakeup function. This commit fixes the missing spinlock init for the waiting_sks list. We also eliminate the race condition between the waiting_sks length check/dequeue operations in tipc_bclink_wakeup_users by simply removing the redundant length check. Signed-off-by:
Erik Hugne <erik.hugne@ericsson.com> Acked-by:
Tero Aho <Tero.Aho@coriant.com> Signed-off-by:
-
hayeswang authored
Redefine REALTEK_USB_DEVICE for the desired USB interface for probe(). There are three USB interfaces for the device. USB_CLASS_COMM and USB_CLASS_CDC_DATA are for ECM mode (config #2). USB_CLASS_VENDOR_SPEC is for the vendor mode (config #1). However, we are not interesting in USB_CLASS_CDC_DATA for probe(), so redefine REALTEK_USB_DEVICE to ignore the USB interface class of USB_CLASS_CDC_DATA. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Eric Dumazet authored
Commit ce1a4ea3 ("net: avoid one atomic operation in skb_clone()") took the wrong way to save one atomic operation. It is actually possible to avoid two atomic operations, if we do not change skb->fclone values, and only rely on clone_ref content to signal if the clone is available or not. skb_clone() can simply use the fast clone if clone_ref is 1. kfree_skbmem() can avoid the atomic_dec_and_test() if clone_ref is 1. Note that because we usually free the clone before the original skb, this particular attempt is only done for the original skb to have better branch prediction. SKB_FCLONE_FREE is removed. Signed-off-by:
-
Mahesh Bandewar authored
The commit 56bfa7ee ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Reported-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
stephen hemminger authored
This file is used by iproute2 and should be exported. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4/cxgb4vf: T5 BAR2 and ethtool related fixes This series adds new interface to calculate BAR2 SGE queue register address for cxgb4 and cxgb4vf driver and some more sge related fixes for T5. Also adds a patch which updates the FW version displayed by ethtool after firmware flash. The patches series is created against 'net-next' tree. And includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
After successfully loading new firmware, reload the new firmware's version number information so "ethtool -i", etc. will report the right value Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Use BAR2 Going To Sleep (GTS) for T5 and later. Use new BAR2 User Doorbells for T5 for both cxgb4 and cxgb4vf driver. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Add new Common Code facilities for calculating T5 BAR2 Offsets for SGE Queue Registers. This new code can handle situations where Queues Per Page * SGE BAR2 Queue Register Area Size > Page Size Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: -
Hariprasad Shenai authored
Add sge_vf_eq_qpp and sge_vf_iq_qpp to (struct sge_params), initialize sge_queues_per_page and sge_vf_qpp in t4vf_get_sge_params(), add new t4vf_prep_adapter() which initializes basic adapter parameters. Grab both SGE_EGRESS_QUEUES_PER_PAGE_VF and SGE_INGRESS_QUEUES_PER_PAGE_VF for VF Drivers since we need both to calculate the User Doorbell area offsets for Egress and Ingress Queues. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
Erik Hugne authored
Part of the old remote management feature is a piece of code that checked permissions on the local system to see if a certain operation was permitted, and if so pass the command to a remote node. This serves no purpose after the removal of remote management with commit 5902385a ("tipc: obsolete the remote management feature") so we remove it. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
-
Jiri Pirko authored
This kills the sparse warnings. Signed-off-by:
-
Duan Jiong authored
xchg is atomic, so there is no necessary to use spin_lock/spin_unlock to protect it. At last, remove the redundant opt = xchg(&inet6_sk(sk)->opt, opt); statement. Signed-off-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by:
-
Lendacky, Thomas authored
When requesting an irq, the name passed in must be (part of) allocated memory. The irq name was a local variable and resulted in random characters when listing /proc/interrupts. Add a character field to the xgbe_channel structure to hold the irq name and use that. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
David L Stevens authored
This patch removes an extra rcu_read_unlock() on an allocation failure in vnet_skb_shape(). The needed rcu_read_unlock() is already done in the out_dropped label. Reported-by:
Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Signed-off-by:
David L Stevens <david.stevens@oracle.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: bcmgenet: support for new GPHY revision scheme These two patches update the GENET GPHY revision logic to account for some of our newer designs starting with GPHY rev G0. ==================== Signed-off-by: -
Florian Fainelli authored
GPHY revision G0 has its version rolled over to 0x10, introduce an explicit check for that revision and invoke the proper workaround function for it. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Starting with GPHY revision G0, the GENET register layout has changed to use the same numbering scheme as the Starfighter 2 switch. This means that GPHY major revision is in bits 15:12, minor in bits 11:8 and patch level is in bits 7:4. Introduce a small heuristic which checks for the old scheme first, tests for the new scheme and finally attempts to catch reserved values and aborts. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2014-12-03 1) Fix a set but not used warning. From Fabian Frederick. 2) Currently we make sequence number values available to userspace only if we use ESN. Make the sequence number values also available for non ESN states. From Zhi Ding. 3) Remove socket policy hashing. We don't need it because socket policies are always looked up via a linked list. From Herbert Xu. 4) After removing socket policy hashing, we can use __xfrm_policy_link in xfrm_policy_insert. From Herbert Xu. 5) Add a lookup method for vti6 tunnels with wildcard endpoints. I forgot this when I initially implemented vti6. Please pull or let me know if there are problems. ==================== Signed-off-by: -
David S. Miller authored
David L Stevens says: ==================== sunvnet: add SG, HW_CSUM, GSO, and TSO support This patch set adds everything needed for TSO support in sunvnet. On my test hardware, this increases the single-stream TCP throughput for the default 1500-byte MTU Linux-Linux from ~2Gbps to 10Gbps and Linux-Solaris from ~2Gbps to 6Gbps. ==================== Signed-off-by: -
David L Stevens authored
This patch adds TSO support for the sunvnet driver. Signed-off-by:
-
David L Stevens authored
This patch adds GSO support to the sunvnet driver. Signed-off-by:
-
David L Stevens authored
This patch adds support for sender-side checksum offloading. Signed-off-by:
-
David L Stevens authored
This patch adds scatter/gather support to the sunvnet driver. Signed-off-by:
-
David L Stevens authored
This patch adds support for VIO v1.7 (extended descriptor format) and v1.8 (receive-side checksumming) to the sunvnet driver. Signed-off-by:
-
David L Stevens authored
This patch changes the name of vnet_port_alloc_tx_bufs to vnet_port_alloc_tx_ring, since there are no buffer allocations after transmit zero copy support was added. This patch also moves the ring allocation to after VIO version negotiation to allow for different-sized descriptors in later VIO versions. Signed-off-by:
-
