Pull gfs2 fixes from Andreas Gruenbacher:
 "Various gfs2 fixes"

* tag 'gfs2-v5.8-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: The freeze glock should never be frozen
  gfs2: When freezing gfs2, use GL_EXACT and not GL_NOCACHE
  gfs2: read-only mounts should grab the sd_freeze_gl glock
  gfs2: freeze should work on read-only mounts
  gfs2: eliminate GIF_ORDERED in favor of list_empty
  gfs2: Don't sleep during glock hash walk
  gfs2: fix trans slab error when withdraw occurs inside log_flush
  gfs2: Don't return NULL from gfs2_inode_lookup

Pull drm fixes from Dave Airlie:
 "Pretty usual rc4 pull: two usual amdgpu, i915 pulls, and some misc arm
  driver fixes.

  The bigger bit is including the asm sources for some GPU shaders that
  were contained in the i915 driver, otherwise it's pretty much business
  as usual.

  dma-buf:
   - fix a use-after-free bug

  amdgpu:
   - Fix for vega20 boards without RAS support
   - DC bandwidth revalidation fix
   - Fix Renoir vram info fetching
   - Fix hwmon freq printing

  i915:
   - GVT fixes
      - Two missed MMIO handler fixes for SKL/CFL
      - Fix mask register bits check
      - Fix one lockdep error for debugfs entry access
   - Include asm sources for render cache clear batches

  msm:
   - memleak fix
   - display block fix
   - address space fixes

  exynos:
   - error value and reference count fix
   - error print removal

  sun4i:
   - remove HPD polling"

* tag 'drm-fixes-2020-07-03' of git://anongit.freedesktop.org/drm/drm: (22 commits)
  drm/amdgpu: use %u rather than %d for sclk/mclk
  drm/amdgpu/atomfirmware: fix vram_info fetching for renoir
  drm/amd/display: Only revalidate bandwidth on medium and fast updates
  drm: sun4i: hdmi: Remove extra HPD polling
  drm/i915: Include asm sources for {ivb, hsw}_clear_kernel.c
  drm/exynos: fix ref count leak in mic_pre_enable
  drm/exynos: Properly propagate return value in drm_iommu_attach_device()
  drm/exynos: Remove dev_err() on platform_get_irq() failure
  drm/amd/powerplay: Fix NULL dereference in lock_bus() on Vega20 w/o RAS
  dma-buf: Move dma_buf_release() from fops to dentry_ops
  drm/msm: Fix up the rest of the messed up address sizes
  drm/msm: Fix setup of a6xx create_address_space.
  drm/msm: Fix address space size after refactor.
  drm/i915/gvt: Use GFP_ATOMIC instead of GFP_KERNEL in atomic context
  drm/i915/gvt: Fix incorrect check of enabled bits in mask registers
  drm/i915/gvt: Fix two CFL MMIO handling caused by regression.
  drm/i915/gvt: Add one missing MMIO handler for D_SKL_PLUS
  drm/msm: Fix 0xfffflub in "Refactor address space initialization"
  drm/msm/dpu: allow initialization of encoder locks during encoder init
  drm/msm/dpu: fix error return code in dpu_encoder_init
  ...

Before this patch, some gfs2 code locked the freeze glock with LM_FLAG_NOEXP
(Do not freeze) flag, and some did not. We never want to freeze the freeze
glock, so this patch makes it consistently use LM_FLAG_NOEXP always.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Before this patch, the freeze code in gfs2 specified GL_NOCACHE in
several places. That's wrong because we always want to know the state
of whether the file system is frozen.

There was also a problem with freeze/thaw transitioning the glock from
frozen (EX) to thawed (SH) because gfs2 will normally grant glocks in EX
to processes that request it in SH mode, unless GL_EXACT is specified.
Therefore, the freeze/thaw code, which tried to reacquire the glock in
SH mode would get the glock in EX mode, and miss the transition from EX
to SH. That made it think the thaw had completed normally, but since the
glock was still cached in EX, other nodes could not freeze again.

This patch removes the GL_NOCACHE flag to allow the freeze glock to be
cached. It also adds the GL_EXACT flag so the glock is fully transitioned
from EX to SH, thereby allowing future freeze operations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.

This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Before this patch, function freeze_go_sync, called when promoting
the freeze glock, was testing for the SDF_JOURNAL_LIVE superblock flag.
That's only set for read-write mounts. Read-only mounts don't use a
journal, so the bit is never set, so the freeze never happened.

This patch removes the check for SDF_JOURNAL_LIVE for freeze requests
but still checks it when deciding whether to flush a journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

In several places, we used the GIF_ORDERED inode flag to determine
if an inode was on the ordered writes list. However, since we always
held the sd_ordered_lock spin_lock during the manipulation, we can
just as easily check list_empty(&ip->i_ordered) instead.
This allows us to keep more than one ordered writes list to make
journal writing improvements.

This patch eliminates GIF_ORDERED in favor of checking list_empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Pull m68knommu mm fixes from Greg Ungerer:
 "Two critical mm related fixes that affect booting of m68k/ColdFire
  devices.

  Both fix problems caused by recent system init memblock changes"

* tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: mm: fix node memblock init
  m68k: nommu: register start of the memory with memblock

Pull devicetree fixes from Rob Herring:

 - Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
   warnings

 - Various fixes for DT binding check warnings

 - A couple of build fixes/improvements for binding checks

 - ReST formatting improvements for writing-schema.rst

 - Document reference fixes

* tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: clock: imx: Fix e-mail address
  dt-bindings: thermal: k3: Fix the reg property
  dt-bindings: thermal: Remove soc unit address
  dt-bindings: display: arm: versatile: Pass the sysreg unit name
  dt-bindings: usb: aspeed: Remove the leading zeroes
  dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
  dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
  dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
  dt-bindings: mailbox: zynqmp_ipi: fix unit address
  dt-bindings: bus: uniphier-system-bus: fix warning in example
  scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
  doc: devicetree: bindings: fix spelling mistake
  docs: dt: minor adjustments at writing-schema.rst
  dt: fix reference to olpc,xo1.75-ec.txt
  dt: Fix broken references to renamed docs
  dt: fix broken links due to txt->yaml renames
  dt: update a reference for reneases pcar file renamed to yaml

Pull data race annotation from Christian Brauner:
 "This contains an annotation patch for a data race in copy_process()
  reported by KCSAN when reading and writing nr_threads.

  The data race is intentional and benign. This is obvious from the
  comment above the relevant code and based on general consensus when
  discussing this issue. So simply using data_race() to annotate this as
  an intentional race seems the best option"

* tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fork: annotate data race in copy_process()

Pull tpm fixes from Jarkko Sakkinen:
 "These are just fixes for bugs found lately.

  All of them are small scale things here and there, and all of them are
  for previous kernel releases (the oldest appeared in v2.6.17)"

* tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm_tis: Remove the HID IFX0102
  tpm_tis_spi: Prefer async probe
  tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes
  tpm/st33zp24: fix spelling mistake "drescription" -> "description"
  tpm_tis: extra chip->ops check on error path in tpm_tis_core_init
  tpm_tis_spi: Don't send anything during flow control
  tpm: Fix TIS locality timeout problems

Merge tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "tpm test fixes from Jarkko Sakkinen"

* tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: tpm: Use /bin/sh instead of /bin/bash
  selftests: tpm: Use 'test -e' instead of 'test -f'
  Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"

Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah Khan
 "Fixes for build and run-times failures.

  Also includes troubleshooting tips updates to kunit user
  documentation"

* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: kunit: Add some troubleshooting tips to the FAQ
  kunit: kunit_tool: Fix invalid result when build fails
  kunit: show error if kunit results are not present
  kunit: kunit_config: Fix parsing of CONFIG options with space

Pull nfsd fixes from Bruce Fields:
 "Fixes for a umask bug on exported filesystems lacking ACL support, a
  leak and a module unloading bug in the /proc/fs/nfsd/clients/ code,
  and a compile warning"

* tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
  nfsd: fix nfsdfs inode reference count leak
  nfsd4: fix nfsdfs reference count loop
  nfsd: apply umask on fs without ACL support

 * dma-buf: fix a use-after-free bug

 * sun4i: remove HPD polling
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702075143.GA25040@linux-uq9g

Pull block fixes from Jens Axboe:

 - Use kvfree_sensitive() for the block keyslot free (Eric)

 - Sync blk-mq debugfs flags (Hou)

 - Memory leak fix in virtio-blk error path (Hou)

* tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
  virtio-blk: free vblk-vqs in error path of virtblk_probe()
  block/keyslot-manager: use kvfree_sensitive()
  blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags

Pull io_uring fixes from Jens Axboe:
 "One fix in here, for a regression in 5.7 where a task is waiting in
  the kernel for a condition, but that condition won't become true until
  task_work is run. And the task_work can't be run exactly because the
  task is waiting in the kernel, so we'll never make any progress.

  One example of that is registering an eventfd and queueing io_uring
  work, and then the task goes and waits in eventfd read with the
  expectation that it'll get woken (and read an event) when the io_uring
  request completes. The io_uring request is finished through task_work,
  which won't get run while the task is looping in eventfd read"

* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
  io_uring: use signal based task_work running
  task_work: teach task_work_add() to do signal_wake_up()

Acer C720 running Linux v5.3 reports this in klog:

tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis tpm_tis: Could not get TPM timeouts and durations
tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis 00:08: Could not get TPM timeouts and durations
ima: No TPM chip found, activating TPM-bypass!
tpm_inf_pnp 00:08: Found TPM with ID IFX0102

% git --no-pager grep IFX0102 drivers/char/tpm
drivers/char/tpm/tpm_infineon.c:	{"IFX0102", 0},
drivers/char/tpm/tpm_tis.c:	{"IFX0102", 0},		/* Infineon */

Obviously IFX0102 was added to the HID table for the TCG TIS driver by
mistake.

Fixes: 93e1b7d4 ("[PATCH] tpm: add HID module parameter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877
Cc: stable@vger.kernel.org
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Reported-by: Ferry Toth: <ferry.toth@elsinga.info>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

On a Chromebook I'm working on I noticed a big (~1 second) delay
during bootup where nothing was happening.  Right around this big
delay there were messages about the TPM:

[    2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2
[    3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ...

I put a few printouts in and saw that tpm_tis_spi_init() (specifically
tpm_chip_register() in that function) was taking the lion's share of
this time, though ~115 ms of the time was in cr50_print_fw_version().

Let's make a one-line change to prefer async probe for tpm_tis_spi.
There's no reason we need to block other drivers from probing while we
load.

NOTES:
* It's possible that other hardware runs through the init sequence
  faster than Cr50 and this isn't such a big problem for them.
  However, even if they are faster they are still doing _some_
  transfers over a SPI bus so this should benefit everyone even if to
  a lesser extent.
* It's possible that there are extra delays in the code that could be
  optimized out.  I didn't dig since once I enabled async probe they
  no longer impacted me.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

The tpm2_get_cc_attrs_tbl() call will result in TPM commands being issued,
which will need the use of the internal command/response buffer.  But,
we're issuing this *before* we've waited to make sure that buffer is
allocated.

This can result in intermittent failures to probe if the hypervisor / TPM
implementation doesn't respond quickly enough.  I find it fails almost
every time with an 8 vcpu guest under KVM with software emulated TPM.

To fix it, just move the tpm2_get_cc_attrs_tlb() call after the
existing code to wait for initialization, which will ensure the buffer
is allocated.

Fixes: 18b3670d ("tpm: ibmvtpm: Add support for TPM2")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Trivial fix, the spelling of "drescription" is incorrect
in function comment.

Fix this.
Signed-off-by: Binbin Zhou <zhoubinbin@uniontech.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Found by smatch:
drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn:
 variable dereferenced before check 'chip->ops' (see line 979)

'chip->ops' is assigned in the beginning of function
in tpmm_chip_alloc->tpm_chip_alloc
and is used before first possible goto to error path.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

During flow control we are just reading from the TPM, yet our spi_xfer
has the tx_buf and rx_buf both non-NULL which means we're requesting a
full duplex transfer.

SPI is always somewhat of a full duplex protocol anyway and in theory
the other side shouldn't really be looking at what we're sending it
during flow control, but it's still a bit ugly to be sending some
"random" data when we shouldn't.

The default tpm_tis_spi_flow_control() tries to address this by
setting 'phy->iobuf[0] = 0'.  This partially avoids the problem of
sending "random" data, but since our tx_buf and rx_buf both point to
the same place I believe there is the potential of us sending the
TPM's previous byte back to it if we hit the retry loop.

Another flow control implementation, cr50_spi_flow_control(), doesn't
address this at all.

Let's clean this up and just make the tx_buf NULL before we call
flow_control().  Not only does this ensure that we're not sending any
"random" bytes but it also possibly could make the SPI controller
behave in a slightly more optimal way.

NOTE: no actual observed problems are fixed by this patch--it's was
just made based on code inspection.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

It has been reported that some TIS based TPMs are giving unexpected
errors when using the O_NONBLOCK path of the TPM device. The problem
is that some TPMs don't like it when you get and then relinquish a
locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without
sending a command.  This currently happens all the time in the
O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops()
further down the code to after the O_NONBLOCK determination is made.
This is safe because the priv->buffer_mutex still protects the priv
state being modified.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275
Fixes: d23d1248 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Mario Limonciello <Mario.Limonciello@dell.com>
Tested-by: Alex Guzman <alex@guzman.io>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Merge tag 'amd-drm-fixes-5.8-2020-07-01' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.8-2020-07-01:

amdgpu:
- Fix for vega20 boards without RAS support
- DC bandwidth revalidation fix
- Fix Renoir vram info fetching
- Fix hwmon freq printing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701194415.4065-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2020-07-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.8-rc4:
- GVT fixes
- Include asm sources for render cache clear batches
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87imf7l6ee.fsf@intel.com

The freescale.com domain is gone for quite some time.

Use the nxp.com domain instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200701005346.1008-1-festevam@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

Pull hyperv fix from Wei Liu:
 "One patch from Joseph to make panic reporting contain more useful
  information"

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: Change flag to write log level in panic msg to false

Large clock values may overflow and show up as negative.

Reported by prOMiNd on IRC.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Renoir uses integrated_system_info table v12.  The table
has the same layout as v11 with respect to this data.  Just
reuse the existing code for v12 for stable.

Fixes incorrectly reported vram info in the driver output.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Merge tag 'exynos-drm-fixes-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

Two fixups
- It fixes wrong return value by returing proper error value instead of
  fixed one.
- It fixes ref count leak in mic_pre_enable.
One cleanup
- It removes dev_err() call on platform_get_irq() failure because
  platform_get_irq() call dev_err() itself on failure.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1593395988-4612-1-git-send-email-inki.dae@samsung.com

A few fixes, mostly fallout from the address space refactor and dpu
color processing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGv0SSXArdYs=mOLqJPJdkvk8CpxaJGecqgbOGazQ2n5og@mail.gmail.com

[Why]
Changes that are fast don't require updating DLG parameters making
this call unnecessary. Considering this is an expensive call it should
not be done on every flip.

DML touches clocks, p-state support, DLG params and a few other DC
internal flags and these aren't expected during fast. A hang has been
reported with this change when called on every flip which suggests that
modifying these fields is not recommended behavior on fast updates.

[How]
Guard the validation to only happen if update type isn't FAST.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191
Fixes: a24eaa5c ("drm/amd/display: Revalidate bandwidth before commiting DC updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Else there will be memory leak if alloc_disk() fails.

Fixes: 6a27b656 ("block: virtio-blk: support multi virt queues per virtio-blk device")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull exfat fixes from Namjae Jeon:

 - Zero out unused characters of FileName field to avoid a complaint
   from some fsck tool.

 - Fix memory leak on error paths.

 - Fix unnecessary VOL_DIRTY set when calling rmdir on non-empty
   directory.

 - Call sync_filesystem() for read-only remount (Fix generic/452 test in
   xfstests)

 - Add own fsync() to flush dirty metadata.

* tag 'exfat-for-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: flush dirty metadata in fsync
  exfat: move setting VOL_DIRTY over exfat_remove_entries()
  exfat: call sync_filesystem for read-only remount
  exfat: add missing brelse() calls on error paths
  exfat: Set the unused characters of FileName field to the value 0000h

Merge tag 'fixes-v5.8-rc3-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull security subsystem fixes from James Morris:
 "Two simple fixes for v5.8:

   - Fix hook iteration and default value for inode_copy_up_xattr
     (KP Singh)

   - Fix the key_permission LSM hook function type (Sami Tolvanen)"

* tag 'fixes-v5.8-rc3-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: Fix hook iteration and default value for inode_copy_up_xattr
  security: fix the key_permission LSM hook function type

Merge tag 'integrity-v5.8-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity updates from Mimi Zohar:
 "Include PCRs 8 & 9 in per TPM 2.0 bank boot_aggregate calculation.

  Prior to Linux 5.8 the SHA1 "boot_aggregate" value was padded with 0's
  and extended into the other TPM 2.0 banks.

  Included in the Linux 5.8 open window, TPM 2.0 PCR bank specific
  "boot_aggregate" values (PCRs 0  - 7) are calculated and extended into the TPM banks.

  Distro releases are now shipping grub2 with TPM support, which extend
  PCRs 8 & 9. I'd like for PCRs 8 & 9 to be included in the new
  "boot_aggregate" calculations.

  For backwards compatibility, if the hash is SHA1, these new PCRs are
  not included in the boot aggregate"

* tag 'integrity-v5.8-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: extend boot_aggregate with kernel measurements

Since 5.7, we've been using task_work to trigger async running of
requests in the context of the original task. This generally works
great, but there's a case where if the task is currently blocked
in the kernel waiting on a condition to become true, it won't process
task_work. Even though the task is woken, it just checks whatever
condition it's waiting on, and goes back to sleep if it's still false.

This is a problem if that very condition only becomes true when that
task_work is run. An example of that is the task registering an eventfd
with io_uring, and it's now blocked waiting on an eventfd read. That
read could depend on a completion event, and that completion event
won't get trigged until task_work has been run.

Use the TWA_SIGNAL notification for task_work, so that we ensure that
the task always runs the work when queued.

Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>

So that the target task will exit the wait_event_interruptible-like
loop and call task_work_run() asap.

The patch turns "bool notify" into 0,TWA_RESUME,TWA_SIGNAL enum, the
new TWA_SIGNAL flag implies signal_wake_up().  However, it needs to
avoid the race with recalc_sigpending(), so the patch also adds the
new JOBCTL_TASK_WORK bit included in JOBCTL_PENDING_MASK.

TODO: once this patch is merged we need to change all current users
of task_work_add(notify = true) to use TWA_RESUME.

Cc: stable@vger.kernel.org # v5.7
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Adjust the reg property to fix the following warning seen with
'make dt_binding_check':

Documentation/devicetree/bindings/thermal/ti,am654-thermal.example.dt.yaml: example-0: thermal@42050000:reg:0: [0, 1107623936, 0, 604] is too long
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630122527.28640-1-festevam@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>