1. 02 Dec, 2013 19 commits
  2. 21 Nov, 2013 15 commits
  3. 20 Nov, 2013 6 commits
    • Ding Tianhong's avatar
      bridge: flush br's address entry in fdb when remove the · f8730420
      Ding Tianhong authored
       bridge dev
      
      When the following commands are executed:
      
      brctl addbr br0
      ifconfig br0 hw ether <addr>
      rmmod bridge
      
      The calltrace will occur:
      
      [  563.312114] device eth1 left promiscuous mode
      [  563.312188] br0: port 1(eth1) entered disabled state
      [  563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects
      [  563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G           O 3.12.0-0.7-default+ #9
      [  563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
      [  563.468200]  0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8
      [  563.468204]  ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8
      [  563.468206]  ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78
      [  563.468209] Call Trace:
      [  563.468218]  [<ffffffff814d1c92>] dump_stack+0x6a/0x78
      [  563.468234]  [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100
      [  563.468242]  [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge]
      [  563.468247]  [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge]
      [  563.468254]  [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0
      [  563.468259]  [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b
      [  570.377958] Bridge firewalling registered
      
      --------------------------- cut here -------------------------------
      
      The reason is that when the bridge dev's address is changed, the
      br_fdb_change_mac_address() will add new address in fdb, but when
      the bridge was removed, the address entry in the fdb did not free,
      the bridge_fdb_cache still has objects when destroy the cache, Fix
      this by flushing the bridge address entry when removing the bridge.
      
      v2: according to the Toshiaki Makita and Vlad's suggestion, I only
          delete the vlan0 entry, it still have a leak here if the vlan id
          is other number, so I need to call fdb_delete_by_port(br, NULL, 1)
          to flush all entries whose dst is NULL for the bridge.
      Suggested-by: default avatarToshiaki Makita <toshiaki.makita1@gmail.com>
      Suggested-by: default avatarVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: default avatarDing Tianhong <dingtianhong@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f8730420
    • Vlad Yasevich's avatar
      net: core: Always propagate flag changes to interfaces · d2615bf4
      Vlad Yasevich authored
      The following commit:
          b6c40d68
          net: only invoke dev->change_rx_flags when device is UP
      
      tried to fix a problem with VLAN devices and promiscuouse flag setting.
      The issue was that VLAN device was setting a flag on an interface that
      was down, thus resulting in bad promiscuity count.
      This commit blocked flag propagation to any device that is currently
      down.
      
      A later commit:
          deede2fa
          vlan: Don't propagate flag changes on down interfaces
      
      fixed VLAN code to only propagate flags when the VLAN interface is up,
      thus fixing the same issue as above, only localized to VLAN.
      
      The problem we have now is that if we have create a complex stack
      involving multiple software devices like bridges, bonds, and vlans,
      then it is possible that the flags would not propagate properly to
      the physical devices.  A simple examle of the scenario is the
      following:
      
        eth0----> bond0 ----> bridge0 ---> vlan50
      
      If bond0 or eth0 happen to be down at the time bond0 is added to
      the bridge, then eth0 will never have promisc mode set which is
      currently required for operation as part of the bridge.  As a
      result, packets with vlan50 will be dropped by the interface.
      
      The only 2 devices that implement the special flag handling are
      VLAN and DSA and they both have required code to prevent incorrect
      flag propagation.  As a result we can remove the generic solution
      introduced in b6c40d68 and leave
      it to the individual devices to decide whether they will block
      flag propagation or not.
      Reported-by: default avatarStefan Priebe <s.priebe@profihost.ag>
      Suggested-by: default avatarVeaceslav Falico <vfalico@redhat.com>
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d2615bf4
    • Alexei Starovoitov's avatar
      ipv4: fix race in concurrent ip_route_input_slow() · dcdfdf56
      Alexei Starovoitov authored
      CPUs can ask for local route via ip_route_input_noref() concurrently.
      if nh_rth_input is not cached yet, CPUs will proceed to allocate
      equivalent DSTs on 'lo' and then will try to cache them in nh_rth_input
      via rt_cache_route()
      Most of the time they succeed, but on occasion the following two lines:
      	orig = *p;
      	prev = cmpxchg(p, orig, rt);
      in rt_cache_route() do race and one of the cpus fails to complete cmpxchg.
      But ip_route_input_slow() doesn't check the return code of rt_cache_route(),
      so dst is leaking. dst_destroy() is never called and 'lo' device
      refcnt doesn't go to zero, which can be seen in the logs as:
      	unregister_netdevice: waiting for lo to become free. Usage count = 1
      Adding mdelay() between above two lines makes it easily reproducible.
      Fix it similar to nh_pcpu_rth_output case.
      
      Fixes: d2d68ba9 ("ipv4: Cache input routes in fib_info nexthops.")
      Signed-off-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dcdfdf56
    • David S. Miller's avatar
      Merge branch 'r8152' · 4f837c3b
      David S. Miller authored
      Hayes Wang says:
      
      ====================
      r8152 bug fixes
      
      For the patch #3, I add netif_tx_lock() before checking the
      netif_queue_stopped(). Besides, I add checking the skb queue
      length before waking the tx queue.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f837c3b
    • hayeswang's avatar
      r8152: fix incorrect type in assignment · 500b6d7e
      hayeswang authored
      The data from the hardware should be little endian. Correct the
      declaration.
      Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      500b6d7e
    • hayeswang's avatar
      r8152: support stopping/waking tx queue · dd1b119c
      hayeswang authored
      The maximum packet number which a tx aggregation buffer could contain
      is the tx_qlen.
      
      	tx_qlen = buffer size / (packet size + descriptor size).
      
      If the tx buffer is empty and the queued packets are more than the
      maximum value which is defined above, stop the tx queue. Wake the
      tx queue if tx queue is stopped and the queued packets are less than
      tx_qlen.
      Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dd1b119c