- 06 Aug, 2009 3 commits
-
-
-
Julia Lawall authored
Elsewhere the sin_family field holds a value with a name of the form AF_..., so it seems reasonable to do so here as well. Also the values of PF_INET and AF_INET are the same. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ struct sockaddr_in sip; @@ ( sip.sin_family == - PF_INET + AF_INET | sip.sin_family != - PF_INET + AF_INET | sip.sin_family = - PF_INET + AF_INET ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Divy Le Ray authored
commit 88045b3c cxgb3: fix mac index mapping Override the mac index computation for the gen2 adapter, as each port is expected to use index 0. introduces a regression on 2 port 1G adapter as its xauicfg vpd value is null. Add a check on the device id. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
- 05 Aug, 2009 22 commits
-
-
Benjamin LaHaise authored
Update the driver version number for any bug reports from end users. Signed-off-by:
Benjamin LaHaise <ben.lahaise@neterion.com> Signed-off-by:
Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by:
-
Benjamin LaHaise authored
This patch implements prefetching of skb->data from a copy of the pointer in the descriptor (which is already in the L1 cache at this point). This improves netperf rx performance (netperf -L 0,0 -c -H 192.168.254.2 -- -M 131072 -m 131072) by 4.9% on a P4 Xeon host. Signed-off-by:
Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by:
-
Benjamin LaHaise authored
This patch prefetches RxD descriptors which helps to lower the latency of a cache miss in vxge_hw_ring_rxd_next_completed. This lowers the % of CPU time used by vxge_hw_ring_rxd_next_completed() where the descriptor is accessed in profiling netperf on a P4 Xeon from 1.5% to 1.0%. Signed-off-by:
-
Benjamin LaHaise authored
wmb() is extremely heavy on x86. The semantics required in the driver are provided by mmiowb(), so use that and improve tx performance on P4 Xeons by 5-10%. Signed-off-by:
-
Benjamin LaHaise authored
This patch fixes a case in the transmit completion code which was resulting in pktgen hanging at the end of a run. The cause is due to the fact that the ->cb[] area of an skb cannot be used in a network driver's transmit path, as that area belongs to the network protocol. Pktgen hangs, as it sends out the same packet multiple times, and vxge's use of this area of the skb for a temporary list can only add the packet to the temporary list once (while it may be on the queue many times). The fix is to remove this abuse of skb->cb[]. Instead, skb pointers are placed into a temporary stack array, and then free outside of the tx lock. This retains the smp optimization of doing dev_kfree_skb() outside of the tx lock. Signed-off-by:
-
Benjamin LaHaise authored
The vxge driver will drop a packet in its transmit function if the number of TxDs available hits 0. Instead of doing that, simply stop the transmit queue when transmitting a packet with the last available TxD. Signed-off-by:
-
Lucy Liu authored
The skb priority to vlan-qos egress mapping that can be configured using set_egress_map with vconfig is overriden by the DCB code in the driver. This patch allows this existing mechanism to work and will increase the configuration flexibility of DCB mode on Linux. A hierarchy of configuration is: 1. Modifies the ixgbe_select_queue() routine for DCB mode to return the priority value from the VLAN tag. It will normally be zero, unless the egress priority map has modified it. This will get packets into the correct queue and result in the queue_mapping field being set correctly. 2. Any tc filter which modifies queue_mapping will be honored, as the filters are handled after the vlan egress map is handled. Signed-off-by:
Lucy Liu <lucy.liu@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
sarveshwarb authored
This patch is a bug fix to avoid system going into a bad state when driver is loaded in context of kdump kernel. The patch fixes the issue by performing a soft reset of pci function at probe time. Signed-off-by:
sarveshwarb <sarveshwarb@serverengines.com> Signed-off-by:
-
Jan Engelhardt authored
This sockopt goes in line with SO_TYPE and SO_PROTOCOL. It makes it possible for userspace programs to pass around file descriptors — I am referring to arguments-to-functions, but it may even work for the fd passing over UNIX sockets — without needing to also pass the auxiliary information (PF_INET6/IPPROTO_TCP). Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
-
Jan Engelhardt authored
Similar to SO_TYPE returning the socket type, SO_PROTOCOL allows to retrieve the protocol used with a given socket. I am not quite sure why we have that-many copies of socket.h, and why the values are not the same on all arches either, but for where hex numbers dominate, I use 0x1029 for SO_PROTOCOL as that seems to be the next free unused number across a bunch of operating systems, or so Google results make me want to believe. SO_PROTOCOL for others just uses the next free Linux number, 38. Signed-off-by:
-
Dhananjay Phadke authored
Add support to handle aggregate packets from firmware. Local TCP flows are automatically identified by firmware based on the dest IP hash added by driver for local IP addresses. The packets are sent down on the jumbo rx ring. Signed-off-by:
Narender Kumar <narender.kumar@qlogic.com> Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
-
Dhananjay Phadke authored
Remove unnecessary offsetof calulations on these structures: netxen_board_info, netxen_user_old_info, netxen_new_user_info. The offsets into the flash are fixed, don't need to be calculated. Signed-off-by:
-
Dhananjay Phadke authored
Fix the calculation of remaining header length in TSO over vlan device case. This was inadvertently missed out in patch 028afe71 ("netxen: add vlan tx acceleration support"). Signed-off-by:
-
Florian Fainelli authored
Starting with version 0.5.1, cpmac is no longer broken. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
This patch slows down the MDIO_ALIVE busy waiting to let switches and PHY come up after reset. Previous loop was too quick for IC+175C and ADM6996C/L switches to come up. Signed-off-by:
-
Florian Fainelli authored
This patch adds support for fixed PHY connected in MII mode to cpmac. We allow external and dumb_switch module parameters to override the PHY detection process since they are always connected with MDIO bus identifier 0. This lets fixed PHYs to be detected correctly and be connected to the their corresponding MDIO bus identifier. Signed-off-by:
-
Florian Fainelli authored
This patch adds fixed PHY support for the two on-chip cpmac Ethernet adapters. Signed-off-by:
-
Florian Fainelli authored
This patch fixes the wrong MDIO bus identifier which was set to 0 unconditionaly, suitable for external switches while it is actually 1 for PHYs different than external switches which are autodetected. Signed-off-by:
-
Jan Engelhardt authored
String literals are constant, and usually, we can also tag the array of pointers const too, moving it to the .rodata section. Signed-off-by:
-
David S. Miller authored
Same as how Randy Dunlap fixed the ipv4 side of things. Signed-off-by: -
Randy Dunlap authored
Fix build errors when SYSCTLs are not enabled: (.init.text+0x5154): undefined reference to `net_ipv4_ctl_path' (.init.text+0x5176): undefined reference to `register_net_sysctl_table' xfrm4_policy.c:(.exit.text+0x573): undefined reference to `unregister_net_sysctl_table Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
- 04 Aug, 2009 15 commits
-
-
Luis R. Rodriguez authored
CC [M] drivers/net/wireless/ath/ath9k/eeprom.o drivers/net/wireless/ath/ath9k/eeprom.c: In function ‘ath9k_hw_AR9287_check_eeprom’: drivers/net/wireless/ath/ath9k/eeprom.c:2866: warning: comparison of distinct pointer types lacks a cast Cc: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Igor Perminov authored
When an interface is configured in the AP mode, the mac80211 implementation doesn't inform the driver to receive PS Poll frames. It leads to inability to communicate with power-saving stations reliably. The FIF_CONTROL flag isn't passed by mac80211 to ieee80211_ops.configure_filter when an interface is in the AP mode. And it's ok, because we don't want to receive ACK frames and other control ones, but only PS Poll ones. This patch introduces the FIF_PSPOLL filter flag in addition to FIF_CONTROL, which means for the driver "pass PS Poll frames". This flag is passed to the driver: A) When an interface is configured in the AP mode. B) In all cases, when the FIF_CONTROL flag was passed earlier (in addition to it). Signed-off-by:
Igor Perminov <igor.perminov@inbox.ru> Signed-off-by:
-
Luis R. Rodriguez authored
We forgot to cancel this work at the stop() callback. ------------[ cut here ]------------ WARNING: at net/mac80211/util.c:511 ieee80211_queue_delayed_work+0x3a/0x40 [mac80211]() Hardware name: 6460DWU queueing ieee80211 work while going to suspend Modules linked in: <-- snip --> Pid: 5124, comm: phy0 Tainted: G W 2.6.31-rc3-wl #4 Call Trace: [<ffffffffa03adcda>] ? ieee80211_queue_delayed_work+0x3a/0x40 [mac80211] [<ffffffff810552b8>] warn_slowpath_common+0x78/0xd0 [<ffffffff81055394>] warn_slowpath_fmt+0x64/0x70 [<ffffffff814ed2c9>] ? thread_return+0x3e/0x635 [<ffffffffa03adcda>] ieee80211_queue_delayed_work+0x3a/0x40 [mac80211] [<ffffffffa0297690>] ath_tx_complete_poll_work+0xc0/0x100 [ath9k] [<ffffffffa02975d0>] ? ath_tx_complete_poll_work+0x0/0x100 [ath9k] [<ffffffff81069b68>] worker_thread+0x178/0x260 [<ffffffff8106ecc0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff810699f0>] ? worker_thread+0x0/0x260 [<ffffffff8106e89e>] kthread+0x9e/0xb0 [<ffffffff8101302a>] child_rip+0xa/0x20 [<ffffffff8106e800>] ? kthread+0x0/0xb0 [<ffffffff81013020>] ? child_rip+0x0/0x20 Signed-off-by:
-
Luis R. Rodriguez authored
We will finalize this after some driver core changes, for now we leave this unsupported. Cc: Stephen Chen <stephen.chen@atheros.com> Cc: Zhifeng Cai <zhifeng.cai@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
Cc: Stephen Chen <stephen.chen@atheros.com> Cc: Zhifeng Cai <zhifeng.cai@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
These will be used later to add support for ar9271. Cc: Stephen Chen <stephen.chen@atheros.com> Cc: Zhifeng Cai <zhifeng.cai@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
We don't use typdefs on ath9k, remove that _t. Cc: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
ath9k_hw_keyreset() has a spurious check for ah->curchan.. remove it. Signed-off-by:
-
Luis R. Rodriguez authored
The keycache reset will not fail as right above we ensure to set the sc->keymax to be <= ah->caps.keycache_size. Just remove this dangling check. Signed-off-by:
-
Luis R. Rodriguez authored
If hw initialization fails (ath9k_hw_init()) on ath_init_softc() we bail out and call ath9k_hw_detach(). The call ath9k_hw_detach() is conditional though as ath9k_hw_init() could itself have called ath9k_hw_detach(). Just describing this is itself a brain twister. Avoid this nonsense by removing ath9k_hw_detach() from ath9k_hw_init(). Upon hw initialization failure we expect the callers to take care of the cleanup. Signed-off-by:
-
Luis R. Rodriguez authored
Signed-off-by:
-
Luis R. Rodriguez authored
Signed-off-by:
-
Luis R. Rodriguez authored
Signed-off-by:
-
Luis R. Rodriguez authored
This makes it clear what this does. Signed-off-by:
-
Luis R. Rodriguez authored
Signed-off-by:
-
