- 24 Jul, 2008 40 commits
-
-
Ulrich Drepper authored
Some platforms do not have support to restore the signal mask in the return path from a syscall. For those platforms syscalls like pselect are not defined at all. This is, I think, not a good choice for paccept() since paccept() adds more value on top of accept() than just the signal mask handling. Therefore this patch defines a scaled down version of the sys_paccept function for those platforms. It returns -EINVAL in case the signal mask is non-NULL but behaves the same otherwise. Note that I explicitly included <linux/thread_info.h>. I saw that it is currently included but indirectly two levels down. There is too much risk in relying on this. The header might change and then suddenly the function definition would change without anyone immediately noticing. Signed-off-by:
Ulrich Drepper <drepper@redhat.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Drepper authored
This patch is by far the most complex in the series. It adds a new syscall paccept. This syscall differs from accept in that it adds (at the userlevel) two additional parameters: - a signal mask - a flags value The flags parameter can be used to set flag like SOCK_CLOEXEC. This is imlpemented here as well. Some people argued that this is a property which should be inherited from the file desriptor for the server but this is against POSIX. Additionally, we really want the signal mask parameter as well (similar to pselect, ppoll, etc). So an interface change in inevitable. The flag value is the same as for socket and socketpair. I think diverging here will only create confusion. Similar to the filesystem interfaces where the use of the O_* constants differs, it is acceptable here. The signal mask is handled as for pselect etc. The mask is temporarily installed for the thread and removed before the call returns. I modeled the code after pselect. If there is a problem it's likely also in pselect. For architectures which use socketcall I maintained this interface instead of adding a system call. The symmetry shouldn't be broken. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <signal.h> #include <stdio.h> #include <unistd.h> #include <netinet/in.h> #include <sys/socket.h> #include <sys/syscall.h> #ifndef __NR_paccept # ifdef __x86_64__ # define __NR_paccept 288 # elif defined __i386__ # define SYS_PACCEPT 18 # define USE_SOCKETCALL 1 # else # error "need __NR_paccept" # endif #endif #ifdef USE_SOCKETCALL # define paccept(fd, addr, addrlen, mask, flags) \ ({ long args[6] = { \ (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \ syscall (__NR_socketcall, SYS_PACCEPT, args); }) #else # define paccept(fd, addr, addrlen, mask, flags) \ syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags) #endif #define PORT 57392 #define SOCK_CLOEXEC O_CLOEXEC static pthread_barrier_t b; static void * tf (void *arg) { pthread_barrier_wait (&b); int s = socket (AF_INET, SOCK_STREAM, 0); struct sockaddr_in sin; sin.sin_family = AF_INET; sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK); sin.sin_port = htons (PORT); connect (s, (const struct sockaddr *) &sin, sizeof (sin)); close (s); pthread_barrier_wait (&b); s = socket (AF_INET, SOCK_STREAM, 0); sin.sin_port = htons (PORT); connect (s, (const struct sockaddr *) &sin, sizeof (sin)); close (s); pthread_barrier_wait (&b); pthread_barrier_wait (&b); sleep (2); pthread_kill ((pthread_t) arg, SIGUSR1); return NULL; } static void handler (int s) { } int main (void) { pthread_barrier_init (&b, NULL, 2); struct sockaddr_in sin; pthread_t th; if (pthread_create (&th, NULL, tf, (void *) pthread_self ()) != 0) { puts ("pthread_create failed"); return 1; } int s = socket (AF_INET, SOCK_STREAM, 0); int reuse = 1; setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse)); sin.sin_family = AF_INET; sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK); sin.sin_port = htons (PORT); bind (s, (struct sockaddr *) &sin, sizeof (sin)); listen (s, SOMAXCONN); pthread_barrier_wait (&b); int s2 = paccept (s, NULL, 0, NULL, 0); if (s2 < 0) { puts ("paccept(0) failed"); return 1; } int coe = fcntl (s2, F_GETFD); if (coe & FD_CLOEXEC) { puts ("paccept(0) set close-on-exec-flag"); return 1; } close (s2); pthread_barrier_wait (&b); s2 = paccept (s, NULL, 0, NULL, SOCK_CLOEXEC); if (s2 < 0) { puts ("paccept(SOCK_CLOEXEC) failed"); return 1; } coe = fcntl (s2, F_GETFD); if ((coe & FD_CLOEXEC) == 0) { puts ("paccept(SOCK_CLOEXEC) does not set close-on-exec flag"); return 1; } close (s2); pthread_barrier_wait (&b); struct sigaction sa; sa.sa_handler = handler; sa.sa_flags = 0; sigemptyset (&sa.sa_mask); sigaction (SIGUSR1, &sa, NULL); sigset_t ss; pthread_sigmask (SIG_SETMASK, NULL, &ss); sigaddset (&ss, SIGUSR1); pthread_sigmask (SIG_SETMASK, &ss, NULL); sigdelset (&ss, SIGUSR1); alarm (4); pthread_barrier_wait (&b); errno = 0 ; s2 = paccept (s, NULL, 0, &ss, 0); if (s2 != -1 || errno != EINTR) { puts ("paccept did not fail with EINTR"); return 1; } close (s); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [akpm@linux-foundation.org: make it compile] [akpm@linux-foundation.org: add sys_ni stub] Signed-off-by:Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Roland McGrath <roland@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by:
-
Ulrich Drepper authored
This patch adds support for flag values which are ORed to the type passwd to socket and socketpair. The additional code is minimal. The flag values in this implementation can and must match the O_* flags. This avoids overhead in the conversion. The internal functions sock_alloc_fd and sock_map_fd get a new parameters and all callers are changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <netinet/in.h> #include <sys/socket.h> #define PORT 57392 /* For Linux these must be the same. */ #define SOCK_CLOEXEC O_CLOEXEC int main (void) { int fd; fd = socket (PF_INET, SOCK_STREAM, 0); if (fd == -1) { puts ("socket(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("socket(0) set close-on-exec flag"); return 1; } close (fd); fd = socket (PF_INET, SOCK_STREAM|SOCK_CLOEXEC, 0); if (fd == -1) { puts ("socket(SOCK_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("socket(SOCK_CLOEXEC) does not set close-on-exec flag"); return 1; } close (fd); int fds[2]; if (socketpair (PF_UNIX, SOCK_STREAM, 0, fds) == -1) { puts ("socketpair(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { coe = fcntl (fds[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("socketpair(0) set close-on-exec flag for fds[%d]\n", i); return 1; } close (fds[i]); } if (socketpair (PF_UNIX, SOCK_STREAM|SOCK_CLOEXEC, 0, fds) == -1) { puts ("socketpair(SOCK_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { coe = fcntl (fds[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("socketpair(SOCK_CLOEXEC) does not set close-on-exec flag for fds[%d]\n", i); return 1; } close (fds[i]); } puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Akinobu Mita authored
Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Adrian Bunk authored
The driver is gone for a long time. Reported-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Adrian Bunk authored
SOUND_TRIDENT was the last PCI OSS driver, and since there's already an ALSA driver for the same hardware we can remove it. [muli@il.ibm.com: update CREDITS] Signed-off-by:
Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by:
-
Andy Whitcroft authored
Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Andy Whitcroft authored
When checking spacing for pointer checks the type cannot start in the middle of a word, ie. this is not 'int * bar': x = fooint * bar; Signed-off-by:
-
Andy Whitcroft authored
Ensure we ignore comments in complex macro detection else we incorrectly report this: #define PFM_GROUP_PERM_ANY -1 /* any user/group */ Signed-off-by:
-
Andy Whitcroft authored
Now that we have a variants system, move to using that to carry the unary/binary designation for +, -, &, and *. Signed-off-by:
-
Andy Whitcroft authored
Add checks for the question mark colon operator spacing, and also check the other uses of colon. Colon means a number of things: - it introduces the else part of the ?: operator, - it terminates a goto label, - it terminates the case value, - it separates the identifier from the bit size on bit fields, and - it is used to introduce option types in asm(). Signed-off-by:
-
Andy Whitcroft authored
Add support for multiple modifiers such as: int __one __two foo; Also handle trailing known modifiers when defecting modifiers: int __one foo __read_mostly; Signed-off-by:
-
Andy Whitcroft authored
Ensure we do not inadvertantly load known modifiers up as possible types. Signed-off-by:
-
Andy Whitcroft authored
Make sure we correctly mark the return type of the pointer to a function declaration. const void *(*sb_tag)(struct sysfs_tag_info *info); Signed-off-by: -
Andy Whitcroft authored
Exclude vmlinux.lds.h from the macro complexity checks. They will never apply sanely here. Signed-off-by:
-
Andy Whitcroft authored
Although we are finding the added modifier in the declaration below we are not correctly matching it as a type. Fix the declaration. static void __ref *vmem_alloc_pages(unsigned int order) { } Signed-off-by: -
Andy Whitcroft authored
Improve type matcher debug so we can see what it does match. As part of this move us to to using the common debug framework. Signed-off-by:
-
Andy Whitcroft authored
Allow for type modifiers mid declaration on multiple declarations: struct mxser_mstatus ms, __user *msu = argp; Reported by Jiri Slaby. Signed-off-by:
-
Wolfram Sang authored
Correct spelling in the kfree reports. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Greg Kroah-Hartman authored
usb_free_urb() can take a NULL, so let's check and warn about that. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Andy Whitcroft authored
Check to see if the block/statement which a condition or loop introduces is indented correctly. Signed-off-by:
-
Andy Whitcroft authored
Extend the trailing statement checks to report a trailing semi-colon ';' as we really want it on the next line and indented so it is really really obvious. Also extend the tests to include while and for. Signed-off-by:
-
Andy Whitcroft authored
Check on the spacing before square brackets. We should only allow spaces there if this is part of a type definition or an initialialiser. Signed-off-by:
-
Andy Whitcroft authored
Report trailing statements on case and default lines. Signed-off-by:
-
Andy Whitcroft authored
Allow printk strings to break the 80 character width limits, thus keeping them complete and searchable. Signed-off-by:
-
Andy Whitcroft authored
Fix end of statement location. Where the last line of the statement is replaced we are miss reporting the newly added replacement an incorrectly indented trailing statement for the negative context. We are also incorrectly reporting negative statements generally. Signed-off-by:
-
Andy Whitcroft authored
We are incorrectly counting the lines in a block while accumulating the trailing lines in a macro statement, leading to false positives. Fix end of block handling and general counting for negative context lines. Signed-off-by:
-
Andy Whitcroft authored
When we see a goto we enter unary context. For example: goto *h; Signed-off-by:
-
Andy Whitcroft authored
When looking for an associated comment they may be suffixed by a macro continuation. Ignore this. Signed-off-by:
-
Andy Whitcroft authored
We are false matching __asm__ as a type, and then tripping the external function checks. Squash. Signed-off-by:
-
Michael Ellerman authored
[apw@shadowen.org: generalise pattern and add tests] Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Andy Whitcroft authored
Some types such as typedefs may overlap real identifiers. Be more targetted about when a type can really exist. Where it cannot let it be an identifier. This prevents false reporting of the minus '-' in unary context in the following: foo[bar->bool - 1]; Signed-off-by:
-
Andy Whitcroft authored
Casts require parentheses so it is possible to have something like this: return (int)(*a); This miss trips the complexity function. Ensure that the two separate parenthesised sections are not coelesced. Signed-off-by:
-
Andy Whitcroft authored
Signed-off-by:
-
Hans-Christian Egtvedt authored
This patch will only setup one clock, if free, and return this clock to the caller. The previous solution would setup both clocks with the same prescaler and divider and return PWM_CPR_CLKB, thus taking both clocks in the same call without the caller knowing. Signed-off-by:
Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Uwe Kleine-König authored
set_type returns an int indicating success or failure, but up to now setup_irq ignores that. In my case this resulted in a machine hang: gpio-keys requested IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, but arm/ns9xxx can only trigger on one direction so set_type didn't touch the configuration which happens do default to a level sensitiveness and returned -EINVAL. setup_irq ignored that and unmasked the irq. This resulted in an endless triggering of the gpio-key interrupt service routine which effectively killed the machine. With this patch applied setup_irq propagates the error to the caller. Note that before in the case chip && !chip->set_type && !chip->name a NULL pointer was feed to printk. This is fixed, too. Signed-off-by:
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Adrian Bunk authored
Trying to compile the v850 port brings many compile errors, one of them exists since at least kernel 2.6.19. There also seems to be noone willing to bring this port back into a usable state. This patch therefore removes the v850 port. If anyone ever decides to revive the v850 port the code will still be available from older kernels, and it wouldn't be impossible for the port to reenter the kernel if it would become actively maintained again. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
WANG Cong authored
- Make some variables and functions static, since they don't need to be global. - Remove an unused function - arch/um/kernel/time.c::sched_clock(). - Clean the style a bit as complained by checkpatch.pl. Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
WANG Cong <wangcong@zeuux.org> Signed-off-by:
-
WANG Cong authored
- Remove arch_validate(), because no one uses it. - Remove useless macro HAVE_ARCH_VALIDATE. - Make the variable 'empty_bad_page' static. Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
WANG Cong authored
Make activate_fd() and free_irq_by_irq_and_dev() static. Remove init_aio_irq() since it has no users. Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
