- 12 Oct, 2011 8 commits
-
-
Tushar Behera authored
In drivers/gpio/gpio-samsung.c, there are certain structures and functions which are not getting used if the particular CPU is not selected. These code segments are moved under CPU specific macros to remove compilation warnings. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Thomas Abraham authored
Some of the gpio chips of exynos4 are assigned a default gpio config without the exynos4 specific pull up/down callbacks which resulted in incorrect setting of pull up/down configuration. Fix this by adding two new exynos4 specific entries in the array of default configs with set_pull and get_pull callbacks set to exynos4 specific callbacks The new default gpio configs can then be used for exynos4 gpio chips. Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
-
Mark Brown authored
The S3C64xx CPUs have TCMs so enable the kernel support for it on these systems. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Peter Korsgaard authored
Only register gpio banks provided by SoC instead of the maximum possible to lessen confusion, get rid of a warning from gpiolib and stop it from eating into the extra gpios for configs with S3C24XX_GPIO_EXTRA != 0. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Peter Korsgaard authored
S3C_GPIO_SPACE cannont be NON-zero, not zero. Signed-off-by:
-
Kukjin Kim authored
The 'nuri_cm_devices' is defined but not used. Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: -
Sachin Kamat authored
This patch registers all the available power domains on ORIGEN board. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Since the DC5V line is connected directly to the HDMI connector, "hdmi-en" regulator would become a dummy regulator on origen board (by defining REGULATOR_DUMMY in the kernel config file). Signed-off-by:
-
- 04 Oct, 2011 32 commits
-
-
Abhilash Kesavan authored
Add suspend-to-ram support for SMDK6440/50 Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by:
-
Abhilash Kesavan authored
The sleep code for S5PV210 and EXYNOS4 are identical; moreover S5p64X0 and S5PC100 for which support will be added soon can use the same procedure. Create a common sleep code in the plat-s5p directory so that it can be re-used. Signed-off-by:
-
Abhilash Kesavan authored
Pave the way for adding PM support on S5P64X0, which is more similar to the S3C64XX series than the S5P series. Hence, the common pm code (containing dummy functions) should not be used for S5P64X0. Signed-off-by:
-
Kukjin Kim authored
-
Kukjin Kim authored
Conflicts: arch/arm/plat-s5p/include/plat/pll.h
-
Kukjin Kim authored
Conflicts: arch/arm/mach-exynos4/clock.c arch/arm/mach-s3c2412/gpio.c arch/arm/mach-s5p64x0/dma.c arch/arm/mach-s5p64x0/gpiolib.c
-
Kukjin Kim authored
-
Kukjin Kim authored
-
Kukjin Kim authored
This patch moves header files from plat-s5p to plat-samsung to remove plat-s5p directory to make one plat-samsung directory for Samsung SoCs. Signed-off-by: -
Kukjin Kim authored
This patch moves header files from plat-s3c24xx to plat-samsung to remove plat-s3c24xx directory to make one plat-samsung directory for Samsung SoCs. And this patch includes fixing coding style, too. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: -
Kukjin Kim authored
This patch moves SoC header files for supporting each SoCs to plat-samsung directory. This is required to make one plat- directory for Samsung SoCs. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: -
Kukjin Kim authored
Removed - arch/arm/plat-s3c24xx/include/plat/pll.h - arch/arm/mach-s3c64xx/include/mach/pll.h - arch/arm/plat-s5p/include/plat/pll.h - arch/arm/plat-samsung/include/plat/pll6553x.h And created - arch/arm/plat-samsung/include/plat/pll.h Cc: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: changed title] [kgene.kim@samsung.com: fixed conflicts in plat-s5p/include/pll.h] Signed-off-by: -
Kukjin Kim authored
Removed - arch/arm/plat-s3c24xx/include/mach/pwm-clock.h - arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - arch/arm/mach-s5p64x0/include/mach/pwm-clock.h - arch/arm/mach-s5pc100/include/mach/pwm-clock.h - arch/arm/mach-s5pv210/include/mach/pwm-clock.h - arch/arm/mach-exynos4/include/mach/pwm-clock.h And created - arch/arm/plat-samsung/include/plat/pwm-clock.h Cc: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: changed title] Signed-off-by: -
Kukjin Kim authored
According to commit a3831cf ("ARM: Consolidate the clkdev header files"), current mach/clkdev.h is no needed in Samsung stuff. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: -
Thomas Abraham authored
The sdhci platform helper function that sets up the default controller configuration is removed for all Samsung platforms since such default controller configuration can be handled by the driver. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Sachin Kamat authored
This patch adds definitions to enable support for s5p-fimc driver on SMDKV310 board. Signed-off-by:
-
Sachin Kamat authored
This patch adds header file protection macros to prevent duplication. Signed-off-by:
-
Jingoo Han authored
This patch is to support usb ehci device to the SMDKV310 board. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Heiko Stuebner authored
This clock is common to S3C2443/2416/2450. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Heiko Stuebner authored
This clock is special to the S3C2416/2450 SoCs. Signed-off-by:
-
Heiko Stuebner authored
It's the same clock for 2443/2416/2450. Signed-off-by:
-
Heiko Stuebner authored
S3C2416/S3C2450 use the same clocks for their i2s blocks and can therefore reuse the existing ones. Signed-off-by:
-
Ajay Kumar authored
This patch: -- Adds platform device support for LCD-LTE480. -- Adds platform data for FB with win_mode and default_bpp. -- Enables FB device support and platform-lcd support. -- Adds SPCON settings for LCD. Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by:
-
Ajay Kumar authored
This patch: -- Adds platform device support for LCD-LTE480. -- Adds platform data for FB with win_mode and default_bpp. -- Enables FB device support and platform-lcd support. -- Adds SPCON settings for LCD. Signed-off-by:
-
Ajay Kumar authored
This patch adds GPIO lines settings(HSYNC, VSYNC, VCLK and VD) for LCD. Signed-off-by:
-
Ajay Kumar authored
Set s3c_device_fb name as "s5p64x0-fb" for S5P6440 and S5P6450. Signed-off-by:
-
Ajay Kumar authored
This patch adds: -- Framebuffer related register mappings and bit fields. -- IRQ number being used. Signed-off-by:
-
Hatim Ali authored
Add support for TVOUT on SMDKV310 board. Signed-off-by:
Hatim Ali <hatim.rv@samsung.com> Signed-off-by:
-
Mark Brown authored
Ever since it was written the Samsung DMA driver has had a TODO in the hw_free() function wondering if we need to flush the DMA buffers. Up until now the answer has been no but with the recent improvements Boojin has done to the DMA infrastructure for the Samsung port the answer has changed to yes for at least S3C6410 systems. If we don't then when we next prepare() the channel the API will get confused trying to run callbacks on the transfers hanging around from the previous time the stream was open and oops. Signed-off-by:
Boojin Kim <boojin.kim@samsung.com> Signed-off-by:
-
Jongpill Lee authored
Signed-off-by:
Jongpill Lee <boyko.lee@samsung.com> Signed-off-by:
-
Jongpill Lee authored
Signed-off-by:
-
Jongpill Lee authored
This patch modifies PMU register setting function to support the other EXYNOS4 SoCs. Signed-off-by:
-
