- 21 Aug, 2020 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "One build fix and a minor fix for suppressing a useless warning when booting a Xen dom0 via UEFI" * tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Fix build error when CONFIG_ACPI is not set/enabled: efi: avoid error message when booting under Xen
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix a few issues in the operating performance points (OPP) framework. Specifics: - Fix re-enabling of resources in dev_pm_opp_set_rate() (Rajendra Nayak) - Fix OPP table reference counting in error paths (Stephen Boyd)" * tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: opp: Enable resources again if they were disabled earlier opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails opp: Put opp table in dev_pm_opp_set_rate() for empty tables
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "Improvements to ext4's block allocator performance for very large file systems, especially when the file system or files which are highly fragmented. There is a new mount option, prefetch_block_bitmaps which will pull in the block bitmaps and set up the in-memory buddy bitmaps when the file system is initially mounted. Beyond that, a lot of bug fixes and cleanups. In particular, a number of changes to make ext4 more robust in the face of write errors or file system corruptions" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits) ext4: limit the length of per-inode prealloc list ext4: reorganize if statement of ext4_mb_release_context() ext4: add mb_debug logging when there are lost chunks ext4: Fix comment typo "the the". jbd2: clean up checksum verification in do_one_pass() ext4: change to use fallthrough macro ext4: remove unused parameter of ext4_generic_delete_entry function mballoc: replace seq_printf with seq_puts ext4: optimize the implementation of ext4_mb_good_group() ext4: delete invalid comments near ext4_mb_check_limits() ext4: fix typos in ext4_mb_regular_allocator() comment ext4: fix checking of directory entry validity for inline directories fs: prevent BUG_ON in submit_bh_wbc() ext4: correctly restore system zone info when remount fails ext4: handle add_system_zone() failure in ext4_setup_system_zone() ext4: fold ext4_data_block_valid_rcu() into the caller ext4: check journal inode extents more carefully ext4: don't allow overlapping system zones ext4: handle error of ext4_setup_system_zone() on remount ext4: delete the invalid BUGON in ext4_mb_load_buddy_gfp() ...
-
David Howells authored
If an error occurs during the construction of an afs superblock, it's possible that an error occurs after a superblock is created, but before we've created the root dentry. If the superblock has a dynamic root (ie. what's normally mounted on /afs), the afs_kill_super() will call afs_dynroot_depopulate() to unpin any created dentries - but this will oops if the root hasn't been created yet. Fix this by skipping that bit of code if there is no root dentry. This leads to an oops looking like: general protection fault, ... KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] ... RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385 ... Call Trace: afs_kill_super+0x13b/0x180 fs/afs/super.c:535 deactivate_locked_super+0x94/0x160 fs/super.c:335 afs_get_tree+0x1124/0x1460 fs/afs/super.c:598 vfs_get_tree+0x89/0x2f0 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x1387/0x2070 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount fs/namespace.c:3390 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 which is oopsing on this line: inode_lock(root->d_inode); presumably because sb->s_root was NULL. Fixes: 0da0b7fd ("afs: Display manually added cells in dynamic root mount") Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "One regression from 5.8 and a few bugs from earlier kernels: - Various spelling corrections in kernel prints - Bug fixes in hfi1 and bntx_re - Revert a 5.8 patch in hns - Batch update for Mellanox and Cumulus maintainers emails" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain Revert "RDMA/hns: Reserve one sge in order to avoid local length error" RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request RDMA/bnxt_re: Do not add user qps to flushlist RDMA/core: Fix spelling mistake "Could't" -> "Couldn't" RDMA/usnic: Fix spelling mistake "transistion" -> "transition" RDMA/hns: Fix spelling mistake "epmty" -> "empty"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes over several drivers, but all are driver- specific and nothing looks scary. Slightly large changes are seen in ASoC qcom driver for the bugs that were revealed by the recent ASoC core change to report the invalid register access errors. Also ASoC fsl got a slight intensive change for the distortion fix. Others are only trivial fixes or device-specific quirks" * tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits) ALSA: hda: avoid reset of sdo_limit ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion ALSA: usb-audio: ignore broken processing/extension unit ASoC: intel: Fix memleak in sst_media_open ASoC: wm8994: Avoid attempts to read unreadable registers ASoC: msm8916-wcd-analog: fix register Interrupt offset ASoC: wm8994: Prevent access to invalid VU register bits on WM1811 ALSA: hda/realtek: Add model alc298-samsung-headphone ALSA: usb-audio: Update documentation comment for MS2109 quirk ALSA: isa: fix spelling mistakes in the comments ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1) ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book ASoC: q6routing: add dummy register read/write function ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM ASoC: Make soc_component_read() returning an error code again ASoC: amd: Replacing component->name with codec_dai->name. ASoC: fsl: Fix unused variable warning ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n ...
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regular fixes pull for rc2. Usual rc2 doesn't seem too busy, mainly i915 and amdgpu. I'd expect the usual uptick for rc3. amdgpu: - Fix allocation size - SR-IOV fixes - Vega20 SMU feature state caching fix - Fix custom pptable handling - Arcturus golden settings update - Several display fixes - Fixes for Navy Flounder - Misc display fixes - RAS fix amdkfd: - SDMA fix for renoir i915: - Fix device parameter usage for selftest mock i915 device - Fix LPSP capability debugfs NULL dereference - Fix buddy register pagemask table - Fix intel_atomic_check() non-negative return value - Fix selftests passing a random 0 into ilog2() - Fix TGL power well enable/disable ordering - Switch to PMU module refcounting - GVT fixes virtio: - Add missing dma_fence_put() in virtio_gpu_execbuffer_ioctl() - Fix memory leak in virtio_gpu_cleanup_object()" * tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm: (34 commits) Revert "drm/amdgpu: disable gfxoff for navy_flounder" drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells drm/i915/selftests: Avoid passing a random 0 into ilog2 drm/i915: Fix wrong return value in intel_atomic_check() drm/i915: Update bw_buddy pagemask table drm/i915/display: Check for an LPSP encoder before dereferencing drm/i915: Copy default modparams to mock i915_device drm/i915: Provide the perf pmu.module drm/amd/display: fix pow() crashing when given base 0 drm/amd/display: Reset scrambling on Test Pattern drm/amd/display: fix dcn3 wide timing dsc validation drm/amd/display: Fix DFPstate hang due to view port changed drm/amd/display: Assign correct left shift drm/amd/display: Call DMUB for eDP power control drm/amdkfd: fix the wrong sdma instance query for renoir drm/amdgpu: parse ta firmware for navy_flounder drm/amdgpu: fix NULL pointer access issue when unloading driver drm/amdgpu: fix uninit-value in arcturus_log_thermal_throttling_event() drm/amdgpu: disable gfxoff for navy_flounder drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal ...
-
Leon Romanovsky authored
Mellanox and Cumulus Network were acquired by Nvidia, so change the maintainers emails to new domain name. Link: https://lore.kernel.org/r/20200810091100.243932-1-leon@kernel.orgSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2020-08-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc2: - GVT fixes - Fix device parameter usage for selftest mock i915 device - Fix LPSP capability debugfs NULL dereference - Fix buddy register pagemask table - Fix intel_atomic_check() non-negative return value - Fix selftests passing a random 0 into ilog2() - Fix TGL power well enable/disable ordering - Switch to PMU module refcounting Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87a6yp7jp3.fsf@intel.com
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.9-2020-08-20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-08-20: amdgpu: - Fixes for Navy Flounder - Misc display fixes - RAS fix amdkfd: - SDMA fix for renoir Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200820041938.3928-1-alexander.deucher@amd.com
-
- 20 Aug, 2020 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Fix P2PDMA build issue (Christoph Hellwig)" * tag 'pci-v5.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/P2PDMA: Fix build without DMA ops
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix more fallout from the dma-pool changes (Nicolas Saenz Julienne, me)" * tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping: dma-pool: Only allocate from CMA when in same memory zone dma-pool: fix coherent pool allocations for IOMMU mappings
-
David Howells authored
The afs_put_operation() function needs to put the reference to the key that's authenticating the operation. Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept") Reported-by: Dave Botsch <botsch@cnf.cornell.edu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pmRafael J. Wysocki authored
Pull operating performance points (OPP) framework fixes for 5.9-rc2 from Viresh Kumar: "This contains the following fixes for 5.9: - Fix re-enabling of resources (Rajendra Nayak). - Put OPP table references (Stephen Boyd)." * 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Enable resources again if they were disabled earlier opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails opp: Put opp table in dev_pm_opp_set_rate() for empty tables
-
Weihang Li authored
This patch caused some issues on SEND operation, and it should be reverted to make the drivers work correctly. There will be a better solution that has been tested carefully to solve the original problem. This reverts commit 711195e5. Fixes: 711195e5 ("RDMA/hns: Reserve one sge in order to avoid local length error") Link: https://lore.kernel.org/r/1597829984-20223-1-git-send-email-liweihang@huawei.comSigned-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Kaike Wan authored
The following message occurs when running an AI application with TID RDMA enabled: hfi1 0000:7f:00.0: hfi1_0: [QP74] hfi1_tid_timeout 4084 hfi1 0000:7f:00.0: hfi1_0: [QP70] hfi1_tid_timeout 4084 The issue happens when TID RDMA WRITE request is followed by an IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on the responder side. As a result, no ACK packet for the latter could be sent because the TID RDMA WRITE request is still being processed on the responder side. When the TID RDMA WRITE request is eventually completed, the requester will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged. If the next request is another TID RDMA WRITE request, no TID RDMA WRITE DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM request is not completed yet. Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be ignored on the responder side because the responder thinks it has already been completed. Eventually the retry will be exhausted and the qp will be put into error state on the requester side. On the responder side, the TID resource timer will eventually expire because no TID RDMA WRITE DATA packets will be received for the second TID RDMA WRITE request. There is also risk of a write-after-write memory corruption due to the issue. Fix by adding a requester side interlock to prevent any potential data corruption and TID RDMA protocol error. Fixes: a0b34f75 ("IB/hfi1: Add interlock between a TID RDMA request and other requests") Link: https://lore.kernel.org/r/20200811174931.191210.84093.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> # 5.4.x+ Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Selvin Xavier authored
Driver shall add only the kernel qps to the flush list for clean up. During async error events from the HW, driver is adding qps to this list without checking if the qp is kernel qp or not. Add a check to avoid user qp addition to the flush list. Fixes: 942c9b6c ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Fixes: c50866e2 ("bnxt_re: fix the regression due to changes in alloc_pbl") Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Colin Ian King authored
There is a spelling mistake in a pr_warn message. Fix it. Link: https://lore.kernel.org/r/20200810075824.46770-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Rajendra Nayak authored
dev_pm_opp_set_rate() can now be called with freq = 0 in order to either drop performance or bandwidth votes or to disable regulators on platforms which support them. In such cases, a subsequent call to dev_pm_opp_set_rate() with the same frequency ends up returning early because 'old_freq == freq' Instead make it fall through and put back the dropped performance and bandwidth votes and/or enable back the regulators. Cc: v5.3+ <stable@vger.kernel.org> # v5.3+ Fixes: cd7ea582 ("opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes") Reported-by: Sajida Bhanu <sbhanu@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reported-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [ Viresh: Don't skip clk_set_rate() and massaged changelog ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
-
Randy Dunlap authored
../arch/x86/pci/xen.c: In function ‘pci_xen_init’: ../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration] acpi_noirq_set(); Fixes: 88e9ca16 ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xenproject.org Cc: linux-pci@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
-
Juergen Gross authored
efifb_probe() will issue an error message in case the kernel is booted as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set. Fixes: 38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB") Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Juergen Gross <jgross@suse.com>
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fixes from Alex Williamson: - Fix lockdep issue reported for recursive read-lock (Alex Williamson) - Fix missing unwind in type1 replay function (Alex Williamson) * tag 'vfio-v5.9-rc2' of git://github.com/awilliam/linux-vfio: vfio/type1: Add proper error unwind for vfio_iommu_replay() vfio-pci: Avoid recursive read-lock usage
-
Jiansong Chen authored
This reverts commit 9c9b17a7. Newly released sdma fw (51.52) provides a fix for the issue. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 19 Aug, 2020 17 commits
-
-
Arvind Sankar authored
gcc can transform the loop in a naive implementation of memset/memcpy etc into a call to the function itself. This optimization is enabled by -ftree-loop-distribute-patterns. This has been the case for a while, but gcc-10.x enables this option at -O2 rather than -O3 as in previous versions. Add -ffreestanding, which implicitly disables this optimization with gcc. It is unclear whether clang performs such optimizations, but hopefully it will also not do so in a freestanding environment. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56888Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arvind Sankar authored
Since commits c041b5ad ("x86, boot: Create a separate string.h file to provide standard string functions") fb4cac57 ("x86, boot: Move memcmp() into string.h and string.c") the decompressor stub has been using the compiler's builtin memcpy, memset and memcmp functions, _except_ where it would likely have the largest impact, in the decompression code itself. Remove the #undef's of memcpy and memset in misc.c so that the decompressor code also uses the compiler builtins. The rationale given in the comment doesn't really apply: just because some functions use the out-of-line version is no reason to not use the builtin version in the rest. Replace the comment with an explanation of why memzero and memmove are being #define'd. Drop the suggestion to #undef in boot/string.h as well: the out-of-line versions are not really optimized versions, they're generic code that's good enough for the preboot environment. The compiler will likely generate better code for constant-size memcpy/memset/memcmp if it is allowed to. Most decompressors' performance is unchanged, with the exception of LZ4 and 64-bit ZSTD. Before After ARCH LZ4 73ms 10ms 32 LZ4 120ms 10ms 64 ZSTD 90ms 74ms 64 Measurements on QEMU on 2.2GHz Broadwell Xeon, using defconfig kernels. Decompressor code size has small differences, with the largest being that 64-bit ZSTD decreases just over 2k. The largest code size increase was on 64-bit XZ, of about 400 bytes. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Suggested-by: Nick Terrell <nickrterrell@gmail.com> Tested-by: Nick Terrell <nickrterrell@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
brookxu authored
In the scenario of writing sparse files, the per-inode prealloc list may be very long, resulting in high overhead for ext4_mb_use_preallocated(). To circumvent this problem, we limit the maximum length of per-inode prealloc list to 512 and allow users to modify it. After patching, we observed that the sys ratio of cpu has dropped, and the system throughput has increased significantly. We created a process to write the sparse file, and the running time of the process on the fixed kernel was significantly reduced, as follows: Running time on unfixed kernel: [root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat real 0m2.051s user 0m0.008s sys 0m2.026s Running time on fixed kernel: [root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat real 0m0.471s user 0m0.004s sys 0m0.395s Signed-off-by: Chunguang Xu <brookxu@tencent.com> Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
brookxu authored
Reorganize the if statement of ext4_mb_release_context(), make it easier to read. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Link: https://lore.kernel.org/r/5439ac6f-db79-ad68-76c1-a4dda9aa0cc3@gmail.comReviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
brookxu authored
Lost chunks are when some other process raced with the current thread to grab a particular block allocation. Add mb_debug log for developers who wants to see how often this is happening for a particular workload. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Link: https://lore.kernel.org/r/0a165ac0-1912-aebd-8a0d-b42e7cd1aea1@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
kyoungho koo authored
I have found double typed comments "the the". So i modified it to one "the" Signed-off-by: kyoungho koo <rnrudgh@gmail.com> Link: https://lore.kernel.org/r/20200424171620.GA11943@koo-Z370-HD3Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Shijie Luo authored
Remove the unnecessary chksum_err and checksum_seen variables as well as some redundant code to make the function easier to understand. [ With changes suggested by jack@ and tytso@ ] Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200819122955.33526-1-luoshijie1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Sameer Pujar authored
By default 'sdo_limit' is initialized with a default value of '8' as per spec. This is overridden in cases where a different value is required. However this is getting reset when snd_hdac_bus_init_chip() is called again, which happens during runtime PM cycle. Avoid this reset by moving 'sdo_limit' setup to 'snd_hdac_bus_init()' function which would be called only once. Fixes: 67ae482a ("ALSA: hda: add member to store ratio for stripe control") Cc: <stable@vger.kernel.org> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1597851130-6765-1-git-send-email-spujar@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Imre Deak authored
The dependency between power wells is determined by the ordering of the power well list: when enabling the power wells for a domain, this happens walking the power well list forward, while disabling them happens in the reverse direction. Accordingly a power well on the list must follow any other power well it depends on. Since the TC AUX power wells depend on TC-cold being blocked, move the TC-cold off power well before all AUX power wells. Fixes: 3c02934b ("drm/i915/tc/tgl: Implement TC cold sequences") Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit b302a2e6) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
George Spelvin authored
igt_mm_config() calls ilog2() on the (pseudo)random 21-bit number s>>12. Once in 2 million seeds, this is zero and ilog2 summons the nasal demons. There was an attempt to handle this case with a max(), but that's too late; ms could already be something bizarre. Given that the low 12 bits of s and ms are always zero, it's a lot simpler just to divide them by 4096, then everything fits into 32 bits, and we can easily generate a random number 1 <= s <= 0x1fffff. Fixes: 14d1b9a6 ("drm/i915: buddy allocator") Signed-off-by: George Spelvin <lkml@sdf.org> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200325192429.GA8865@SDF.ORGSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 21118e8e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Tianjia Zhang authored
In the case of calling check_digital_port_conflicts() failed, a negative error code -EINVAL should be returned. Fixes: bf5da83e ("drm/i915: Move check_digital_port_conflicts() earier") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200802111535.5200-1-tianjia.zhang@linux.alibaba.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 66b51b80) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Matt Roper authored
A recent bspec update removed the LPDDR4 single channel entry from the buddy register table, but added a new four-channel entry. Workaround 1409767108 hasn't been updated with any guidance for four channel configurations, so we leave that alternate table unchanged for now. Bspec 49218 Fixes: 3fa01d64 ("drm/i915/tgl: Program BW_BUDDY registers during display init") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200612204734.3674650-1-matthew.d.roper@intel.comReviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit ecb40d08) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
Avoid a GPF at <1>[ 20.177320] BUG: kernel NULL pointer dereference, address: 000000000000007c <1>[ 20.177322] #PF: supervisor read access in kernel mode <1>[ 20.177323] #PF: error_code(0x0000) - not-present page <6>[ 20.177324] PGD 0 P4D 0 <4>[ 20.177327] Oops: 0000 [#1] PREEMPT SMP PTI <4>[ 20.177328] CPU: 1 PID: 944 Comm: debugfs_test Not tainted 5.8.0-rc7-CI-CI_DRM_8814+ #1 <4>[ 20.177330] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018 <4>[ 20.177372] RIP: 0010:i915_lpsp_capability_show+0x44/0xc0 [i915] <4>[ 20.177374] Code: 0f b6 81 ca 0d 00 00 3c 0b 74 77 76 19 3c 0c 75 44 83 7e 7c 01 7e 2f 48 c7 c6 d7 b9 47 a0 e8 43 df 06 e1 31 c0 c3 3c 09 72 2b <8b> 46 7c 85 c0 75 e6 8b 82 e4 00 00 00 89 c2 83 e2 fb 83 fa 0a 74 <4>[ 20.177376] RSP: 0018:ffffc90000cebe38 EFLAGS: 00010246 <4>[ 20.177377] RAX: 0000000000000009 RBX: ffff888267fe6a58 RCX: ffff888252d10000 <4>[ 20.177378] RDX: ffff88824a9a4000 RSI: 0000000000000000 RDI: ffff888267fe6a30 <4>[ 20.177379] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 <4>[ 20.177380] R10: 0000000000000001 R11: 0000000000000000 R12: ffffc90000cebf08 <4>[ 20.177381] R13: 00000000ffffffff R14: 0000000000000001 R15: ffff888267fe6a30 <4>[ 20.177383] FS: 00007f6f9c6b5e40(0000) GS:ffff888276480000(0000) knlGS:0000000000000000 <4>[ 20.177384] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 20.177385] CR2: 000000000000007c CR3: 0000000255f04006 CR4: 00000000003606e0 <4>[ 20.177386] Call Trace: <4>[ 20.177390] seq_read+0xcb/0x420 which is presumably from having no encoder attached at that time. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2175 Fixes: 8806211f ("drm/i915: Add i915_lpsp_capability debugfs") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200729130912.30093-1-chris@chris-wilson.co.ukSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit a22b1a9b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
Since we use the module parameters stored inside the drm_i915_device itself, we need to ensure the mock i915_device also sets up the right defaults. Fixes: 8a25c4be ("drm/i915/params: switch to device specific parameters") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728150600.4509-1-chris@chris-wilson.co.ukSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 98ef0674) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
Rather than manually implement our own module reference counting for perf pmu events, finally realise that there is a module parameter to struct pmu for this very purpose. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716094643.31410-1-chris@chris-wilson.co.ukSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 27e897be) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
https://github.com/intel/gvt-linuxJani Nikula authored
gvt-next-fixes-2020-08-05 - Fix guest suspend/resume low performance handling of shadow ppgtt (Colin) - Fix PV notifier handling for guest suspend/resume (Colin) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200805080207.GY27035@zhen-hp.sh.intel.com
-
Mike Pozulp authored
The Galaxy Book Ion uses the same ALC298 codec as other Samsung laptops which have the no headphone sound bug, like my Samsung Notebook. The Galaxy Book owner confirmed that this patch fixes the bug. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200818165446.499821-1-pozulp.kernel@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-