Here, hdpvr_register_videodev() is responsible for setup and
register a video device. Also defining and initializing a worker.
hdpvr_register_videodev() is calling by hdpvr_probe at last.
So no need to flush any work here.
Unregister v4l2, free buffers and memory. If hdpvr_probe() will fail.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Don't populate the read-only u8 array buf on the stack at run time but
instead make it static const; makes object code smaller saving over 480
bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  33030	  65936	    192	  99158	  18356	drivers/media/usb/dvb-usb/cxusb.o

After:
   text	   data	    bss	    dec	    hex	filename
  32446	  66032	    192	  98670	  1816e	drivers/media/usb/dvb-usb/cxusb.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

When building without CONFIG_GPIOLIB, we get a harmless
warning about an unused variable:

drivers/media/pci/solo6x10/solo6x10-gpio.c: In function 'solo_gpio_init':
drivers/media/pci/solo6x10/solo6x10-gpio.c:165:6: error: unused variable 'ret' [-Werror=unused-variable]

This adds another #ifdef around the declaration.

Fixes: d3202d19 ("media: solo6x10: export hardware GPIO pins 8:31 to gpiolib interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Acked-by: Anton Sviridenko <anton@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Don't populate the arrays RegAddr on the stack, instead make them static
const.  Makes the object code smaller by over 980 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  64923	    304	      0	  65227	   fecb	drivers/media/tuners/mxl5005s.o

After:
   text	   data	    bss	    dec	    hex	filename
  63779	    464	      0	  64243	   faf3	drivers/media/tuners/mxl5005s.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Use BIT(x) instead of (1<<x).
Signed-off-by: Srishti Sharma <srishtishar@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Use WARN_ON() instead of BUG_ON() to avoid crashing the kernel.
Signed-off-by: Srishti Sharma <srishtishar@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The current implementation has to search the list of controls for the
pixel rate control, each time it is set.  This can be optimised easily
by storing the ctrl pointer in the CSI/TX object, and referencing that
directly.

While at it, fix up a missing blank line also highlighted in review
comments.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

mt9v032_power_on() leaves clk enabled in case of errors,
but it is not expected by its callers.
There is a similar problem in mt9v032_registered().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The ov7670 has the test pattern generator features.  This makes use of
it through V4L2_CID_TEST_PATTERN control.

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The sub-device for ov7670 is registered by v4l2_async_register_subdev().
So it should be unregistered by v4l2_async_unregister_subdev() instead of
v4l2_device_unregister_subdev().

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Connect voice coil lens to the camera sensor, so that it can be used
by camera applications.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Document dts support of LED/focus.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add the missing MAINTAINERS entry for imx274, fix error handling in driver
probe and unregister the correct control handler in driver remove.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

When matching and registering a sub-device from a sub-notifier use the
v4l2_device from the root parent notifier. Using the v4l2_dev stored in
the sub-notifier itself is incorrect as it might not be set.

This can be demonstrated by unbinding and rebinding the adv748x driver
and observing that it fails to probe due to the check !v4l2_dev in
v4l2_device_register_subdev().

    # echo 4-0070 > /sys/bus/i2c/drivers/adv748x/unbind
    # echo 4-0070 > /sys/bus/i2c/drivers/adv748x/bind
    adv748x 4-0070: chip found @ 0xe0 revision 2143
    adv748x 4-0070: Failed to probe TXA
    adv748x: probe of 4-0070 failed with error -22

Looking at the commit which adds sub-notifiers to V4L2 it looks like
this is the intended behavior of the original commit. With this fix the
adv748x can be re-bound and still function properly.

Fixes: 2cab00bb ("media: v4l: async: Allow binding notifiers to sub-devices")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Current implementation of __v4l2_async_notifier_parse_fwnode_endpoints()
checks first whether subdev_count >= subdev_max and only then whether
the port being parsed matches the given port index. This triggers an
error in otherwise valid cases of skipping ports that do not match.

Fix this by moving the check below the port index check.

Fixes: 9ca46531 ("media: v4l: fwnode: Support generic parsing of graph endpoints in a device")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

v4l2_async_register_subdev_sensor_common() is only provided when
CONFIG_V4L2_FWNODE is enabled, otherwise we get a link failure:

drivers/media/i2c/et8ek8/et8ek8_driver.o: In function `et8ek8_probe':
et8ek8_driver.c:(.text+0x884): undefined reference to `v4l2_async_register_subdev_sensor_common'

This adds a Kconfig 'select' statement like all the other users of
this interface have.

Fixes: d8932f38 ("media: et8ek8: Add support for flash and lens devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig.

Fixes: 5fcf092e ("[media] ov13858: add support for OV13858 sensor")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Since commit d57ea877 ("media: rc: per-protocol repeat period"), most
IR protocols have a lower keyup timeout. This causes problems on the
ite-cir, which has default IR timeout of 200ms.

Since the IR decoders read the trailing space, with a IR timeout of 200ms,
the last keydown will have at least a delay of 200ms. This is more than
the protocol timeout of e.g. rc-6 (which is 164ms). As a result the last
IR will be interpreted as a new keydown event, and we get two keypresses.

Revert the protocol timeout to 250ms, except for cec which needs a timeout
of 550ms.

Fixes: d57ea877 ("media: rc: per-protocol repeat period")

Cc: <stable@vger.kernel.org> # 4.14
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Cc: stable@vger.kernel.org
Signed-off-by: Laurent Caumont <lcaumont2@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

For the dvb-frontends that are now part of the documentation,
complete the kernel-doc markups, in order for them to be
properly used at the driver's kAPI documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add to the media book the attachment kAPI for the DVB
frontend drivers that have already some kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Now, the Kernel checks for kernel_doc format issues.
Weird enough, it didn't get any of those troubles. Shssst!

Well, let's fix it, as a preventive way to avoid having
hundreds of new warnings on some next Linux version.

Tested by adding all files under dvb-frontends that have
"/**" on them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Several comments are wrongly tagged as kernel-doc, causing
those warnings:

  drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq'
  drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp'
  drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand  *
   on line 652 - I thought it was a doc line
  drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op'
  drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand  * (reg, val) commad list to initialize this module.
   on line 301 - I thought it was a doc line
  drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb'
  drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf'
  drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id'
  drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface'
  drivers/media/i2c/ov5647.c:432: warning: Cannot understand  * @short Subdev core operations registration
   on line 432 - I thought it was a doc line
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen'
  drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv'
  drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv '
  drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei '
  drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand  * @frame_width: width in pixels of the buffer containing the input frame
   on line 150 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand  * @ slice_size: slice size
   on line 356 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand  * @ bitstream_size: bitstream size
   on line 369 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand  * @seq_info:  sequence information buffer
   on line 395 - I thought it was a doc line
  drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe'
  drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f'
  drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb '
  drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv'
  drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; '
  drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state'
  drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency'
  drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv'
  drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv'
  drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt'
  drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix this warning:
	drivers/media/i2c/lm3560.c:69: warning: No description found for parameter 'dev'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

On kernel-doc, struct declarations should be declared as "struct foo".

Fix the following warnings:
	drivers/media/platform/rcar_jpu.c:265: warning: cannot understand function prototype: 'struct jpu_q_data '
	drivers/media/platform/rcar_jpu.c:281: warning: cannot understand function prototype: 'struct jpu_ctx '
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix this warning:
	drivers/media/platform/vsp1/vsp1_dl.c:87: warning: No description found for parameter 'has_chain'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Remove this warning:
	drivers/media/platform/soc_camera/soc_scale_crop.c:309: warning: Cannot understand  * @icd		- soc-camera device
	 on line 309 - I thought it was a doc line
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

Fix those warnings:
	drivers/media/tuners/mt2063.c:1413: warning: No description found for parameter 'f_ref'
	drivers/media/tuners/mt2063.c:1413: warning: Excess function parameter 'f_Ref' description in 'MT2063_fLO_FractionalTerm'
	drivers/media/tuners/mt2063.c:1476: warning: Excess function parameter 'f_Avoid' description in 'MT2063_CalcLO2Mult'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Solve those warnings:
	drivers/media/radio/radio-wl1273.c:1337: warning: No description found for parameter 'radio'
	drivers/media/radio/radio-wl1273.c:1337: warning: Excess function parameter 'core' description in 'wl1273_fm_set_tx_power'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix this warning:
	drivers/media/platform/s3c-camif/camif-core.c:112: warning: No description found for parameter 'vp'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix those warnings:
  drivers/media/platform/mtk-vpu/mtk_vpu.c:223: warning: No description found for parameter 'wdt'
  drivers/media/platform/mtk-vpu/mtk_vpu.c:223: warning: No description found for parameter 'wdt_refcnt'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix those warnings:
  drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c:69: warning: No description found for parameter 'reserved'
  drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c:175: warning: Excess struct member 'dev' description in 'vdec_vp8_inst'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There are some struct fields that aren't documented, and some
consts whose comments start with /**, but they aren't kernel-doc
annotations. So, fix it:

  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'hdl'
  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'pad'
  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'format'
  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'int_seq'
  drivers/media/i2c/tvp514x.c:219: warning: cannot understand function prototype: 'const struct v4l2_fmtdesc tvp514x_fmt_list[] = '
  drivers/media/i2c/tvp514x.c:235: warning: cannot understand function prototype: 'const struct tvp514x_std_info tvp514x_std_list[] = '
  drivers/media/i2c/tvp514x.c:941: warning: No description found for parameter 'fmt'
  drivers/media/i2c/tvp514x.c:941: warning: Excess function parameter 'format' description in 'tvp514x_set_pad_format'
  drivers/media/i2c/tvp514x.c:1208: warning: cannot understand function prototype: 'const struct i2c_device_id tvp514x_id[] = '
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There is a bad kernel-doc markup, producing the following warnings:

  drivers/media/pci/netup_unidvb/netup_unidvb_core.c:85: warning: bad line: 			Bits [0-7]:	DMA packet size, 188 bytes
  drivers/media/pci/netup_unidvb/netup_unidvb_core.c:86: warning: bad line: 			Bits [16-23]:	packets count in block, 128 packets
  drivers/media/pci/netup_unidvb/netup_unidvb_core.c:87: warning: bad line: 			Bits [24-31]:	blocks count, 8 blocks
  drivers/media/pci/netup_unidvb/netup_unidvb_core.c:89: warning: bad line: 			For example, value of 375000000 equals to 3 sec

Fix that, and use a list for the bits option, in order for it
to be better format, if we add it to a driver's documentation
file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

as warned:
  drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset'
  drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock'
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock_frequency'
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'power_count'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

get rid of the following warnings:
  drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'v4l2dev'
  drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'ctrl_handler'
  drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'debugfs'
  drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'audmode'
  drivers/media/radio/radio-si476x.c:317: warning: Excess struct member 'kref' description in 'si476x_radio'
  drivers/media/radio/radio-si476x.c:317: warning: Excess struct member 'core_lock' description in 'si476x_radio'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As warned:

  drivers/media/dvb-frontends/ix2505v.c:24: warning: cannot understand function prototype: 'int ix2505v_debug; '
  drivers/media/dvb-frontends/ix2505v.c:59: warning: No description found for parameter 'state'
  drivers/media/dvb-frontends/ix2505v.c:128: warning: No description found for parameter 'fe'

None of the comments there are kernel-doc. So, remove them with:

	perl -pi -e 's,\/\*\*,/*,g' drivers/media/dvb-frontends/ix2505v.c
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There are a few mistakes on the existing markups:

  drivers/media/pci/tw68/tw68-risc.c:32: warning: Cannot understand  *  @rp		pointer to current risc program position
   on line 32 - I thought it was a doc line
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'pci'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'buf'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'sglist'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'top_offset'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'bottom_offset'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'bpl'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'padding'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'lines'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Get rid of the following warnings:
    drivers/media/platform/pxa_camera.c:247: warning: No description found for parameter 'layout'
    drivers/media/platform/pxa_camera.c:867: warning: No description found for parameter 'buf'
    drivers/media/platform/pxa_camera.c:867: warning: No description found for parameter 'sg'
    drivers/media/platform/pxa_camera.c:867: warning: No description found for parameter 'sglen'
    drivers/media/platform/pxa_camera.c:867: warning: Excess function parameter 'vb' description in 'pxa_init_dma_channel'
    drivers/media/platform/pxa_camera.c:867: warning: Excess function parameter 'dma' description in 'pxa_init_dma_channel'
    drivers/media/platform/pxa_camera.c:867: warning: Excess function parameter 'cibr' description in 'pxa_init_dma_channel'
    drivers/media/platform/pxa_camera.c:1029: warning: No description found for parameter 'last_submitted'
    drivers/media/platform/pxa_camera.c:1029: warning: No description found for parameter 'last_issued'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>