- 15 Apr, 2015 10 commits
-
-
Jesse Brandeburg authored
The init_interrupt_scheme function had a possible failure path to allocate memory that was found by smatch. This adds the correct handling to the function to abort probe if the memory allocation fails. Change-ID: I2bf1d826a244209619da4c452d0d58b3eb5e26a3 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Jim Young <james.m.young@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Kevin Scott authored
Store the 8 bytes of the WR_CSR_PROT field returned as part of the get device/function capabilities AQ command. Change-ID: Ifcaeea2ff29885fa769e4f384c7db88a25e8afd0 Signed-off-by:
Kevin Scott <kevin.c.scott@intel.com> Tested-by:
-
Jesse Brandeburg authored
This is a feature to enable better debugging of user reported issues by allowing a bash script to acquire information about the internal hardware state. The data output to the kernel log is collected by the script and can then be sent to Intel. This is a critical debugging feature for helping us interpret and reproduce complex customer setups. Change-ID: Ie8b3ab09086d6870a709015f51ada05af10b41bb Signed-off-by:
-
Vasu Dev authored
This is to allow quick check for FCoE capability is enabled or not in device function before any SW overrides. Change-ID: I5f78ba798d566f143161273156916c6f4074496e Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Tested-by:
-
Anjali Singhai Jain authored
With a HW issue that was recently discovered, after a VFLR HW might be indicating to us a reset completion little too early. So wait another 10 msec for cache to be cleaned up. Change-ID: I6a24dcf5dd7ffcd6500246e717411ef58532d1e9 Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Mitch Williams authored
Move the VF notification functions to the top of the file. This eliminates an unnecessary declaration. Change-ID: I036171f14180ee9f0ce4e0a21334d6a217d06c94 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Mitch Williams authored
Gratuitously notify VFs of link state when they activate their queues. In general, this is the last thing that a VF driver will do as it opens its interface, so this is a good time to notify the VF. Currently, VF devices assume link is up unless told otherwise, which means that VFs instantiated on a PF with no link will report the wrong state. This change corrects that issue. Change-ID: Iea53622904ecc681ac3f8938d81c30033ef9a0a6 Signed-off-by:
-
Mitch Williams authored
The aq_pending field in the adapter structure is actually redundant with the current_op field. Remove the aq_pending field and expunge all traces of it from the official record. This simplifies the code significantly, especially in the virtual channel completion routine. Change-ID: Ib2957c8c19882bd0cecc6fcd133912c24b46a1ff Signed-off-by:
-
Anjali Singhai Jain authored
With this patch we can now add Flow director Sideband rules for a VF from it's PF. Here is an example on how it can be done when VF id = 5 and queue = 2: "ethtool -N ethx flow-type udp4 src-ip x.x.x.x dst-ip y.y.y.y src-port p1 dst-port p2 action 2 user-def 5" User-def specifies VF id and action specifies queue. Change-ID: Ib37d6dff3823a4d85caffde638473891c38c2b89 Signed-off-by:
-
Mitch Williams authored
Not sure how this slipped through. Cosmetic change only. Signed-off-by:
-
- 14 Apr, 2015 30 commits
-
-
Mitch Williams authored
Explicitly stop the rings belonging to each VF when disabling SR-IOV. Even though the VFs were gone, and the associated VSIs were removed, the rings were not stopped, and in some circumstances the hardware would continue to access the memory formerly used by the rings, causing memory corruption or DMAR errors, both of which would lead to general malaise of the kernel. To relieve this condition, explicitly stop all the rings associated with each VF before releasing its resources. Signed-off-by:
-
Jeff Kirsher authored
With the recent driver changes, bump the version. Signed-off-by:
Krishneil Singh <krishneil.k.singh@intel.com>
-
Jeff Kirsher authored
VFs were being improperly added to the switch's multicast group. The error stems from the fact that incorrect arguments were passed to the "update_mc_addr" function. It would seem to be a copy paste error since the parameters are similar to the "update_uc_addr" function. Signed-off-by:
Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Acked-by:
Matthew Vick <matthew.vick@intel.com> Tested-by:
-
Jeff Kirsher authored
When we call update_max_size it does not drop all oversized messages. This is due to the difficulty in performing this operation, since it is a FIFO which makes updating anything other than head or tail very difficult. To fix this, modify validate_msg_size to ensure that we error out later when trying to transmit the message that could be oversized. This will generally be a rare condition, as it requires the FIFO to include a message larger than the max_size negotiated during mailbox connect. Note that max_size is always smaller than rx.size so it should be safe to use here. Also, update the update_max_size function header comment to clearly indicate that it does not drop all oversized messages, but only those at the head of the FIFO. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
-
Jeff Kirsher authored
When we forcefully shutdown the mailbox, we then go about resetting max size to 0, and clearing all messages in the FIFO. Instead, we should just reset the head pointer so that the FIFO becomes empty, rather than changing the max size to 0. This helps prevent increment in tx_dropped counter during mailbox negotiation, which is confusing to viewers of Linux ethtool statistics output. Signed-off-by:
-
Jeff Kirsher authored
The use of dropped doesn't really mean dropped mailbox messages, but rather specifically messages which were too large to fit in the remote Rx FIFO. Rename the stat to more clearly indicate what it means. Signed-off-by:
-
Jeff Kirsher authored
When the PF receives a request to update a multicast address for the VF, it checks the enabled multicast mode first. Fix a bug where the VF tried to set a multicast address before requesting the required xcast mode. This ensures the multicast addresses are honored as long as the xcast mode was allowed. Signed-off-by:
-
Jeff Kirsher authored
Since the service task handles varying work that doesn't all require the interface to be up, launch the service timer immediately. This ensures that we continually check the mailbox, as well as handle other tasks while the device is down. Signed-off-by:
-
Jeff Kirsher authored
The header comment included a miscopy of a C-code line, and also mis-used Rx FIFO when it clearly meant Tx FIFO Signed-off-by:
-
Jeff Kirsher authored
Add a header comment explaining why we have the somewhat crazy mailbox flow. This flow is necessary as it prevents the PF<->SM mailbox from being flooded by the VF messages, which normally trigger a message to the PF. This helps prevent the case where we see a PF mailbox timeout. Signed-off-by:
-
Jeff Kirsher authored
Since we already schedule the service task, we can just wait for this task to handle the mailbox events from the VF. This reduces some complex code flow, and makes it so we have a single path for handling the VF messages. There is a possibility that we have a slight delay in handling VF messages, but it should be minimal. The result of tx_complete and !rx_ready is insufficient to determine whether we need to process the mailbox. There is a possible race condition whereby the VF fills up the mbmem for us, but we have already recently processed the mailboxes in the interrupt. During this time, the interrupt is disabled. Thus, our Rx FIFO is empty, but the mbmem now has data in it. Since we continually check whether Rx FIFO is empty, we then never call process. This results in the possibility to prevent PF from handling the VF mailbox messages. Instead, just call process every time, despite the fact that we may or may not have anything to process for the VF. There should be minimal overhead for doing this, and it resolves an issue where the VF never comes up due to never getting response for its SET_LPORT_STATE message. Signed-off-by:
-
Jeff Kirsher authored
Since we run the watchdog periodically, which might take a while and potentially monopolize the system default workqueue, create our own separate work queue. This also helps reduce and stabilize latency between scheduling the work in our interrupt and actually performing the work. Still use a timer for the regular scheduled interval but queue the work onto its own work queue. It seemed overkill to create a single workqueue per interface, so we just spawn a single work queue for all interfaces upon driver load. For this reason, use a multi-threaded workqueue with one thread per processor, rather than single threaded queue. Signed-off-by:
-
Jeff Kirsher authored
When returning virtualization queues from the VF back to the PF, do not retain the VF rate limiter. Signed-off-by:
Todd Russell <todd.a.russell@intel.com> Acked-by:
-
Jeff Kirsher authored
Named it tx_hang_count to differentiate it from tx_hwtstamp_timeout. Signed-off-by:
-
Jeff Kirsher authored
We were incrementing the tx_timeout_count for both the Tx hang and then for all reset flows. Instead, we should only increment tx_timeout_count in the Tx hang path, so that our Tx hang counter does not increment when it was not caused by a Tx hang. Signed-off-by:
-
Jeff Kirsher authored
Since we already print this message when a reset is requested via the RESET_REQUESTED flag, we do not need to print it before setting the flag. Signed-off-by:
-
Jeff Kirsher authored
This patch resolves an issue with ethtool stats displaying useless values on the VF, because some stats simply have no meaning to the VF. Resolve this by splitting these out into PF_STATS and only showing them if we aren't the VF. Signed-off-by:
-
Jeff Kirsher authored
Even though it shouldn't strictly matter, don't count queue stats higher than the max_queues value stored for this mac. This ensures that we don't attempt to check queues which don't belong to use in VFs. This shouldn't be a visible change, as the VFs should see zero for queues which don't belong to them. Signed-off-by:
-
Jeff Kirsher authored
Currently, we show statistics for all 128 queues, even though we don't necessarily have that many queues available especially in the VF case. Instead, use the hw->mac.max_queues value, which tells us how many queues we actually have, rather than the space for the rings we allocated. In this way, we prevent dumping statistics that are useless on the VF. Signed-off-by:
-
Jeff Kirsher authored
Previously, the user was not allowed to create a VLAN interface on top of the switch default vid. Signed-off-by:
-
Jeff Kirsher authored
The were several functions which had parameters which were never or sometimes used in functions. To resolve possible compiler warnings, use __always_unused or __maybe_unused kernel macros to resolve. Signed-off-by:
-
Jeff Kirsher authored
This change adds a function called "fm10k_netpoll" that's used to define "ndo_poll_controller" in "fm10k_netdev_ops". This is required to enable support for "netconsole" in fm10k. Signed-off-by:
-
Jeff Kirsher authored
Currently, the VFs do not read the default VLAN during initialization, so they will not be able to indicate untagged frames properly. Signed-off-by:
-
Jeff Kirsher authored
Corrected a spelling mistake that was found over time. Signed-off-by:
-
Jeff Kirsher authored
Output of ethtool was reporting 2 rx_errors entries. This change removes one of the redundant entries. Signed-off-by:
-
Jeff Kirsher authored
The function collecting Tx statistics was actually using values from the RX ring. Thus, Tx and Rx statistics values reported by "ifconfig" will return identical values. This change corrects this error and the Tx statistics is now reading from the Tx ring. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
The dwmac-socfpga.c conflict was a case of a bug fix overlapping changes in net-next to handle an error pointer differently. Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4: Misc. fixes for sge Increases value of MAX_IMM_TX_PKT_LEN to improve latency, fill freelist starving threshold based on adapter type, add comments for tx flits and sge length code and don't call t4_slow_intr_handler when we are not master PF. This patch series has been created against net-next tree and includes patches on cxgb4 driver We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Add comment for tx filt and sge length calucaltion code, also remove a hardcoded value Signed-off-by:
-
