The functions cb_pcidda_ai_cmd(), cb_pcidda_ai_cmdtest(), and
cb_pcidda_ns_to_timer() are all partially coded stubs for command
support with the analog output subdevice. Just remove the code
since it is #if 0'ed out. It can be added back later if command
support is completed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As pointed out by Fengguang Wu, the error test after finding the
boardinfo should be testing for (!thisboard).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update the prompt line and description for the COMEDI_AMPLC_DIO200_PCI
config option to add the new PCIe boards supported by the "amplc_dio200"
driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the `insn_read` and `insn_write` handlers of the '8254' counter
subdevices to support reading and writing multiple data values.
(Writing multiple values isn't very useful, but if that's what the user
wants....)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add clock source constants for the timer subdevice of the PCIe cards
supported by the "amplc_dio200" driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement the timer subdevice for the new PCIe boards.  The subdevice was
previously marked as unused, but was reserved for this purpose.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These are currently unused but will be used to support extra features of
the PCIe boards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add constants to "comedi.h" for the extra clock and gate sources
allowed by the new PCIe cards supported by the "amplc_dio200" driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

One of the enhancements of the new PCIe boards is the addition of extra
clock and gate sources.  Allow clock and gate sources up to 31 for these
boards (compared to 7 for the old boards) although most of those are
reserved for future use.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The new PCIe boards PCIe215, PCIe236 and PCIe296 have some enhanced
features (over the older boards), although none of these features are
supported by this driver yet.

Enable the enhanced features in hardware and use `dio200_layouts[]` to
indicate which boards support the enhanced features.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The new PCIe boards PCIe215, PCIe236 and PCIe296 need a special register
setting to allow generation of interrupts on the PCIe bus.  Add
`dio200_pcie_board_setup()` to do this and call it from
`dio200_attach_pci()` for those boards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add preliminary support for the above PCIe boards.  The interrupt
subdevice is not working yet as the boards need some additional
initialization to enable interrupts.  Reserve an unused subdevice that
will eventually become a timer subdevice.

Some unused subdevices have been added between the used subdevices on
the PCIe215 and PCIe236.  This is so the subdevice numbers will match a
pattern-matching feature to be added at a later date, where the
pattern-match specifications for a subdevice include pattern-match
results from other subdevices, specified by index.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add `mainshift` member to `struct dio200_board` to hold the amount of
left-shift required for main register offsets.  This is 0 for all the
boards currently supported so it doesn't need initializing explicitly in
any current element of `dio200_boards[]`.  It will be non-zero for some
new boards to be supported by this driver.

Modify the register access functions `dio200_read8()` and
`dio200_write8()` to take the shift into account.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Store the length of the main register region in new member `mainsize` of
`struct dio200_board` and initialize it in each element of
`dio200_boards[]`.  For all currently supported boards this is
initialized to `DIO200_IO_SIZE` (0x20), but will be different for newer
boards to be supported in the future.

For ISA boards, this is the actual region length requested, but for PCI
boards it's the minimum expected region length.  Verify that the PCI BAR
region length is sufficient in `dio200_attach_pci()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add `mainbar` member to `struct dio200_board` to hold the PCI BAR number
for the main registers.  This is `2` for the PCI boards currently
supported (PCI215 and PCI272) but will be different for some new boards
to be supported later.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards currently supported by this module all use port I/O.  Support
memory-mapped I/O as well for future PCI/PCIe cards.

Define `struct dio200_region` to hold the type of register access and
either the port I/O base address or an ioremapped MMIO address.  Add a
member `io` to the comedi device private data (`struct dio200_private`)
to hold this.  Use this instead of `dev->iobase`.  Memory-mapped
registers are mapped in `dio200_pci_attach()` and unmapped in
`dio200_detach()`.

`dio200_detach()` now uses the private data pointer `devpriv` set to
`dev->private` but can return early if it is `NULL` because no clean-up
needs to be done in that case.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't pass the I/O base address to `dio200_common_attach()`.  The only
thing it does with it is set `dev->iobase` to the passed in value.  Do
that before calling `dio200_common_attach()` in order to simplify
upcoming support for different register access methods.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add custom functions to access hardware registers and call them instead
of calling `inb()` and `outb()` directly.  When additional cards are
supported by this driver requiring different register access methods,
the new functions will localize the register access differences to just
these functions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "amplc_dio200" module no longer depends on the "8255" module, so the
'COMEDI_AMPLC_DIO200' Kconfig setting no longer needs to select
'COMEDI_8255'.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement the '8255' DIO subdevice internally to this module instead of
using the external "8255" module.  I plan to add support for additional
cards to this driver that would require the I/O callback functionality
of the 8255 module, but the existing callback functions do not have much
context to handle this elegantly.  The additional cards also have extra
DIO features which cannot be handled by the existing "8255" module and
that I'd like to support some time in the future.

The bottom line is I _could_ continue using the "8255" module for a
while with a callback function, but it would turn out to be a very ugly
callback function and I'd have to ditch the use of the "8255" module as
soon as I added an extra feature to the DIO subdevice.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add our own functions to manipulate the '8254' counter chip instead of
the inline ones from "8253.h".  This will make the code less messy when
we add code to support new boards later.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the absolute, modified I/O base addresses in the private data
structures for the '8254' counter and 'intr' DIO subdevices with offsets
from the main I/O base address.  `dio200_subdev_intr_init()` now needs
the offset instead of the absolute address.  `dio200_subdev_8254_init()`
now only needs the offset instead of both the absolute address and the
offset.  The '8255' DIO subdevices are unaffected as they are handled by
the external "8255" module.

This change is not useful by itself but is an intermediate step for
later changes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `has_clk_gat_sce` member of `struct dio200_subdev_8254` indicates
whether the board has clock and gate source selection registers.  The
same information can be obtained from read-only board layout data so
doesn't need to be set per '8254' counter subdevice.  Eliminate the
member and use the read-only data instead.  The last parameter of
`dio200_subdev_8254_init()` is used to initialize this member, so remove
that parameter as well.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add inline helper function `dio200_board_layout(board)` to get a pointer
to the board layout data for a board.  Add inline helper function
`dio200_dev_layout(dev)` to get a pointer to the board layout data for a
comedi device (this function is currently unused but will be used by a
later change).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the tag name `dio200_layout` is available, rename `struct
dio200_layout_struct` to `struct dio200_layout` as the `_struct` suffix
is a bit redundant and I plan to use this type in other places in the
module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename `enum dio200_layout` to `enum dio200_layout_idx`.  It's only used
once and frees up the `dio200_layout` tag for something else later.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the clock and gate configuration functions for the '8254' counter
subdevices and pass in the pointers to the comedi device and comedi
subdevice.  This is just preparing the way for later changes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Absorb `dio200_pci_common_attach()` into `dio200_attach_pci()` since
that's the only place it is called from.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The call to `comedi_set_hw_dev()` from `dio200_pci_common_attach()` is
now unnecessary since `dio200_pci_common_attach()` is now only called
from this driver's `attach_pci` hook `dio200_attach_pci()` and the
comedi core now calls `comedi_set_hw_dev()` before calling that.  Remove
the unnecessary call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that this driver no longer supports "manual" attachment of PCI
devices in its `attach` hook (`dio200_attach()`), it no longer has code
that searches for a suitable PCI device and increments its reference
count.  Since the driver no longer has any reason for incrementing and
decrementing the PCI device's reference count, the calls to
`pci_dev_get()` and `pci_dev_put()` can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the code that allows PCI boards to be manually attached by the
`COMEDI_DEVCONFIG` ioctl (or the "comedi_config" application).
Supported PCI boards will be attached automatically at probe time via
`comedi_pci_auto_config()` and the `attach_pci` hook in the `struct
comedi_driver`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the driver description comment to use the preferred block
comment style so that future changes are acceptable to the checkpatch.pl
script.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remove some of the function prototypes , they dont have a definition
of the function
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remove CsrTime typedef and replace all the users with the u32
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

and added pr_fmt.
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

and added pr_fmt.
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warning.
- Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warning.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...

and add pr_fmt.
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warning.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CsrThreadHandle is typedef of struct CsrThread.
Some functions in csr_framework_ext.h use it as parameter.
But, nobody call them.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>