Pull RCU-vs-KCSAN fixes from Borislav Petkov:
 "A single commit that uses "arch_" atomic operations to avoid the
  instrumentation that comes with the non-"arch_" versions.

  In preparation for that commit, it also has another commit that makes
  these "arch_" atomic operations available to generic code.

  Without these commits, KCSAN uses can see pointless errors"

* tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Fixup noinstr warnings
  locking/atomics: Provide the arch_atomic_ interface to generic code

Pull objtool fixes from Borislav Petkov:
 "Three fixes from Peter Zijlstra suppressing KCOV instrumentation in
  noinstr sections.

  Peter Zijlstra says:
    "Address KCOV vs noinstr. There is no function attribute to
     selectively suppress KCOV instrumentation, instead teach objtool
     to NOP out the calls in noinstr functions"

  This cures a bunch of KCOV crashes (as used by syzcaller)"

* tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix noinstr vs KCOV
  objtool: Provide elf_write_{insn,reloc}()
  objtool: Clean up elf_write() condition

Pull x86 entry fixes from Borislav Petkov:
 "This is the x86/entry urgent pile which has accumulated since the
  merge window.

  It is not the smallest but considering the almost complete entry core
  rewrite, the amount of fixes to follow is somewhat higher than usual,
  which is to be expected.

  Peter Zijlstra says:
   'These patches address a number of instrumentation issues that were
    found after the x86/entry overhaul. When combined with rcu/urgent
    and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy
    again.

    Part of making this all work is bumping the minimum GCC version for
    KASAN builds to gcc-8.3, the reason for this is that the
    __no_sanitize_address function attribute is broken in GCC releases
    before that.

    No known GCC version has a working __no_sanitize_undefined, however
    because the only noinstr violation that results from this happens
    when an UB is found, we treat it like WARN. That is, we allow it to
    violate the noinstr rules in order to get the warning out'"

* tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Fix #UD vs WARN more
  x86/entry: Increase entry_stack size to a full page
  x86/entry: Fixup bad_iret vs noinstr
  objtool: Don't consider vmlinux a C-file
  kasan: Fix required compiler version
  compiler_attributes.h: Support no_sanitize_undefined check with GCC 4
  x86/entry, bug: Comment the instrumentation_begin() usage for WARN()
  x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*()
  x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline()
  compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr
  kasan: Bump required compiler version
  x86, kcsan: Add __no_kcsan to noinstr
  kcsan: Remove __no_kcsan_or_inline
  x86, kcsan: Remove __no_kcsan_or_inline usage

The cell name stored in the afs_cell struct is a 64-char + NUL buffer -
when it needs to be able to handle up to AFS_MAXCELLNAME (256 chars) + NUL.

Fix this by changing the array to a pointer and allocating the string.

Found using Coverity.

Fixes: 989782dc ("afs: Overhaul cell database management")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull cifs fixes from Steve French:
 "Six cifs/smb3 fixes, three of them for stable.

  Fixes xfstests 451, 313 and 316"

* tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: misc: Use array_size() in if-statement controlling expression
  cifs: update ctime and mtime during truncate
  cifs/smb3: Fix data inconsistent when punch hole
  cifs/smb3: Fix data inconsistent when zero file range
  cifs: Fix double add page to memcg when cifs_readpages
  cifs: Fix cached_fid refcnt leak in open_shroot

Pull SCSI fixes from James Bottomley:
 "Six small fixes, five in drivers and one to correct another minor
  regression from cc97923a ("block: move dma drain handling to
  scsi") where we still need the drain stub to be built in to the kernel
  for the modular libata, non-modular SAS driver case"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mptscsih: Fix read sense data size
  scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action
  scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset()
  scsi: libata: Fix the ata_scsi_dma_need_drain stub
  scsi: qla2xxx: Keep initiator ports after RSCN
  scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request

Pull VFIO fixes from Alex Williamson:

 - Fix double free of eventfd ctx (Alex Williamson)

 - Fix duplicate use of capability ID (Alex Williamson)

 - Fix SR-IOV VF memory enable handling (Alex Williamson)

* tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Fix SR-IOV VF handling with MMIO blocking
  vfio/type1: Fix migration info capability ID
  vfio/pci: Clear error and request eventfd ctx after releasing

Pull i2c fixes from Wolfram Sang:
 "This contains a 5.8 regression fix for the Designware driver, a
  register bitfield fix for the fsi driver, and a missing sanity check
  for the I2C core"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: check returned size of emulated smbus block read
  i2c: fsi: Fix the port number field in status register
  i2c: designware: Adjust bus speed independently of ACPI

Pull staging driver fixes from Greg KH:
 "Here are a small number of tiny staging driver fixes for 5.8-rc3.

  Not much here, but there were some reported problems to be fixed:

   - three wfx driver fixes

   - rtl8723bs driver fix

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate()
  staging: wfx: fix coherency of hif_scan() prototype
  staging: wfx: drop useless loop
  staging: wfx: fix AC priority

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.8-rc3 to resolve some reported
  issues.

  Nothing major here:

   - gadget driver fixes

   - cdns3 driver fixes

   - xhci fixes

   - renesas_usbhs driver fixes

   - some new device support with ids

   - documentation update

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
  usb: renesas_usbhs: getting residue from callback_result
  Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
  xhci: Poll for U0 after disabling USB2 LPM
  xhci: Return if xHCI doesn't support LPM
  usb: host: xhci-mtk: avoid runtime suspend when removing hcd
  xhci: Fix enumeration issue when setting max packet size for FS devices.
  xhci: Fix incorrect EP_STATE_MASK
  usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
  usb: cdns3: trace: using correct dir value
  usb: cdns3: ep0: fix the test mode set incorrectly
  Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
  usb: gadget: udc: Potential Oops in error handling code
  usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe()
  usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work
  usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
  usb: cdns3: trace: using correct dir value
  usb: cdns3: ep0: fix the test mode set incorrectly
  usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs
  USB: ohci-sm501: Add missed iounmap() in remove
  cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip
  ...

Pull char/misc fixes from Greg KH:
 "Some tiny char/misc driver fixes for 5.8-rc3.

  The "largest" changes are in the mei driver, to resolve some reported
  problems and add some new device ids. There's also a binder bugfix, an
  fpga driver build fix, and some assorted habanalabs fixes.

  All of these, except for the habanalabs fixes, have been in linux-next
  with no reported issues. The habanalabs driver changes showed up in my
  tree on Friday, but as they are totally self-contained, all should be
  good there"

* tag 'char-misc-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: increase h/w timer when checking idle
  habanalabs: Correct handling when failing to enqueue CB
  habanalabs: increase GAUDI QMAN ARB WDT timeout
  habanalabs: rename mmu_write() to mmu_asid_va_write()
  habanalabs: use PI in MMU cache invalidation
  habanalabs: block scalar load_and_exe on external queue
  mei: me: add tiger lake point device ids for H platforms.
  mei: me: disable mei interface on Mehlow server platforms
  binder: fix null deref of proc->context
  fpga: zynqmp: fix modular build

Pull EDAC fix from Borislav Petkov:
 "A single fix for amd64_edac restoring the reporting of the DRAM scrub
  rate on family 0x15 CPUs"

* tag 'edac_urgent_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Read back the scrub rate PCI register on F15h

Pull dma-mapping fixes from Christoph Hellwig:

 - fix dma coherent mmap in nommu (me)

 - more AMD SEV fallout (David Rientjes, me)

 - fix alignment in dma_common_*_remap (Eric Auger)

* tag 'dma-mapping-5.8-4' of git://git.infradead.org/users/hch/dma-mapping:
  dma-remap: align the size in dma_common_*_remap()
  dma-mapping: DMA_COHERENT_POOL should select GENERIC_ALLOCATOR
  dma-direct: add missing set_memory_decrypted() for coherent mapping
  dma-direct: check return value when encrypting or decrypting memory
  dma-direct: re-encrypt memory if dma_direct_alloc_pages() fails
  dma-direct: always align allocation size in dma_direct_alloc_pages()
  dma-direct: mark __dma_direct_alloc_pages static
  dma-direct: re-enable mmap for !CONFIG_MMU

Pull NFS client bugfixes from Anna Schumaker:
 "Stable Fixes:
   - xprtrdma: Fix handling of RDMA_ERROR replies
   - sunrpc: Fix rollback in rpc_gssd_dummy_populate()
   - pNFS/flexfiles: Fix list corruption if the mirror count changes
   - NFSv4: Fix CLOSE not waiting for direct IO completion
   - SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()

  Other Fixes:
   - xprtrdma: Fix a use-after-free with r_xprt->rx_ep
   - Fix other xprtrdma races during disconnect
   - NFS: Fix memory leak of export_path"

* tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
  NFSv4 fix CLOSE not waiting for direct IO compeletion
  pNFS/flexfiles: Fix list corruption if the mirror count changes
  nfs: Fix memory leak of export_path
  sunrpc: fixed rollback in rpc_gssd_dummy_populate()
  xprtrdma: Fix handling of RDMA_ERROR replies
  xprtrdma: Clean up disconnect
  xprtrdma: Clean up synopsis of rpcrdma_flush_disconnect()
  xprtrdma: Use re_connect_status safely in rpcrdma_xprt_connect()
  xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed

Pull io_uring fixes from Jens Axboe:
 "Three small fixes:

   - Close a corner case for polled IO resubmission (Pavel)

   - Toss commands when exiting (Pavel)

   - Fix SQPOLL conditional reschedule on perpetually busy submit
     (Xuan)"

* tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
  io_uring: fix current->mm NULL dereference on exit
  io_uring: fix hanging iopoll in case of -EAGAIN
  io_uring: fix io_sq_thread no schedule when busy

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
    - multipath deadlock fixes (Anton)
    - NUMA fixes (Max)
    - RDMA completion vector fix (Max)
    - IO deadlock fix (Sagi)
    - multipath reference fix (Sagi)
    - NS mutation fix (Sagi)

 - Use right allocator when freeing bip in error path (Chengguang)

* tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
  nvme-multipath: fix bogus request queue reference put
  nvme-multipath: fix deadlock due to head->lock
  nvme: don't protect ns mutation with ns->head->lock
  nvme-multipath: fix deadlock between ana_work and scan_work
  nvme: fix possible deadlock when I/O is blocked
  nvme-rdma: assign completion vector correctly
  nvme-loop: initialize tagset numa value to the value of the ctrl
  nvme-tcp: initialize tagset numa value to the value of the ctrl
  nvme-pci: initialize tagset numa value to the value of the ctrl
  nvme-pci: override the value of the controller's numa node
  nvme: set initial value for controller's numa node
  block: release bip in a right way in error path

Merge tag 'for-5.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Quite a few DM zoned target fixes and a Zone append fix in DM core.

   Considering the amount of dm-zoned changes that went in during the
   5.8 merge window these fixes are not that surprising.

 - A few DM writecache target fixes.

 - A fix to Documentation index to include DM ebs target docs.

 - Small cleanup to use struct_size() in DM core's retrieve_deps().

* tag 'for-5.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm writecache: add cond_resched to loop in persistent_memory_claim()
  dm zoned: Fix reclaim zone selection
  dm zoned: Fix random zone reclaim selection
  dm: update original bio sector on Zone Append
  dm zoned: Fix metadata zone size check
  docs: device-mapper: add dm-ebs.rst to an index file
  dm ioctl: use struct_size() helper in retrieve_deps()
  dm writecache: skip writecache_wait when using pmem mode
  dm writecache: correct uncommitted_block when discarding uncommitted entry
  dm zoned: assign max_io_len correctly
  dm zoned: fix uninitialized pointer dereference

Pull kgdb fixes from Daniel Thompson:
 "The main change here is a fix for a number of unsafe interactions
  between kdb and the console system. The fixes are specific to kdb
  (pure kgdb debugging does not use the console system at all). On
  systems with an NMI then kdb, if it is enabled, must get messages to
  the user despite potentially running from some "difficult" calling
  contexts. These fixes avoid using the console system where we have
  been provided an alternative (safer) way to interact with the user
  and, if using the console system in unavoidable, use oops_in_progress
  for deadlock avoidance. These fixes also ensure kdb honours the
  console enable flag.

  Also included is a fix that wraps kgdb trap handling in an RCU read
  lock to avoids triggering diagnostic warnings. This is a wide lock
  scope but this is OK because kgdb is a stop-the-world debugger. When
  we stop the world we put all the CPUs into holding pens and this
  inhibits RCU update anyway"

* tag 'kgdb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kgdb: Avoid suspicious RCU usage warning
  kdb: Switch to use safer dbg_io_ops over console APIs
  kdb: Make kdb_printf() console handling more robust
  kdb: Check status of console prior to invoking handlers
  kdb: Re-factor kdb_printf() message write code

Pull powerpc fixes from Michael Ellerman:

 - A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y.

 - Two minor build fixes.

Thanks to: Aneesh Kumar K.V, Arseny Solokha, Harish.

* tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix build failure in ebb tests
  powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUAL
  powerpc/fsl_booke/32: Fix build with CONFIG_RANDOMIZE_BASE

Pull RISC-V fixes from Palmer Dabbelt:
 "This contains a handful of fixes I'd like to target for rc3.

  Most of them fix issues with the conversion of our vDSO to C. There is
  also one fix to the SiFive PRCI driver that I picked up as it's
  causing boot issues on the hardware.

   - A fix to allow kernels with dynamic ftrace to use the vDSO.

   - Some build fixes for the C vDSO functions.

   - A fix to the PRCI driver's memory allocation, which was the cause
     of some boot panics with FREELIST_RANDOM"

* tag 'riscv-for-linus-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fixup __vdso_gettimeofday broke dynamic ftrace
  riscv: Add extern declarations for vDSO time-related functions
  clk: sifive: allocate sufficient memory for struct __prci_data
  riscv: Add -fPIC option to CFLAGS_vgettimeofday.o

Pull arm64 fixes from Will Deacon:
 "The big fix here is to our vDSO sigreturn trampoline as, after a
  painfully long stint of debugging, it turned out that fixing some of
  our CFI directives in the merge window lit up a bunch of logic in
  libgcc which has been shown to SEGV in some cases during asynchronous
  pthread cancellation.

  It looks like we can fix this by extending the directives to restore
  most of the interrupted register state from the sigcontext, but it's
  risky and hard to test so we opted to remove the CFI directives for
  now and rely on the unwinder fallback path like we used to.

   - Fix unwinding through vDSO sigreturn trampoline

   - Fix build warnings by raising minimum LD version for PAC

   - Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB

   - Fix perf register PC reporting for compat tasks

   - Fix 'make clean' warning for arm64 signal selftests

   - Fix ftrace when BTI is compiled in

   - Avoid building the compat vDSO using GCC plugins"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist
  arm64: perf: Report the PC value in REGS_ABI_32 mode
  kselftest: arm64: Remove redundant clean target
  arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist
  arm64: Don't insert a BTI instruction at inner labels
  arm64: vdso: Don't use gcc plugins for building vgettimeofday.c
  arm64: vdso: Only pass --no-eh-frame-hdr when linker supports it
  arm64: Depend on newer binutils when building PAC
  arm64: compat: Remove 32-bit sigreturn code from the vDSO
  arm64: compat: Always use sigpage for sigreturn trampoline
  arm64: compat: Allow 32-bit vdso and sigpage to co-exist
  arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline

Pull ACPI fixes from Rafael Wysocki:
 "Prevent bypassing kernel lockdown via the ACPI tables loading
  interface (Jason A. Donenfeld) and fix the handling of an ACPI sysfs
  attribute (Nathan Chancellor)"

* tag 'acpi-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sysfs: Fix pm_profile_attr type
  ACPI: configfs: Disallow loading ACPI tables when locked down

Pull power management fixes from Rafael Wysocki:
 "These fix a recent regression that broke suspend-to-idle on some x86
  systems, fix the intel_pstate driver to correctly let the platform
  firmware control CPU performance in some cases and add __init
  annotations to a couple of functions.

  Specifics:

   - Make sure that the _TIF_POLLING_NRFLAG is clear before entering the
     last phase of suspend-to-idle to avoid wakeup issues on some x86
     systems (Chen Yu, Rafael Wysocki).

   - Cover one more case in which the intel_pstate driver should let the
     platform firmware control the CPU frequency and refuse to load
     (Srinivas Pandruvada).

   - Add __init annotations to 2 functions in the power management core
     (Christophe JAILLET)"

* tag 'pm-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: Rearrange s2idle-specific idle state entry code
  PM: sleep: core: mark 2 functions as __init to save some memory
  cpufreq: intel_pstate: Add one more OOB control bit
  PM: s2idle: Clear _TIF_POLLING_NRFLAG before suspend to idle

Pull iommu fixes from Joerg Roedel:
 "A couple of Intel VT-d fixes:

   - Make Intel SVM code 64bit only. The code uses pgd_t* and the IOMMU
     only supports long-mode page-table formats, so its broken on 32bit
     anyway.

   - Make sure GFX quirks in for Intel VT-d are not applied to untrusted
     devices. Those devices might gain full memory access otherwise.

   - Identity mapping setup fix.

   - Fix ACS enabling when Intel IOMMU is off and untrusted devices are
     detected.

   - Two smaller fixes for coherency and IO page-table setup"

* tag 'iommu-fixes-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix misuse of iommu_domain_identity_map()
  iommu/vt-d: Update scalable mode paging structure coherency
  iommu/vt-d: Enable PCI ACS for platform opt in hint
  iommu/vt-d: Don't apply gfx quirks to untrusted devices
  iommu/vt-d: Set U/S bit in first level page table by default
  iommu/vt-d: Make Intel SVM code 64-bit only

Pull drm fixes from Dave Airlie:
 "Usual rc3 pickup, lots of little fixes all over.

  The core VT registration regression fix is probably the largest,
  otherwise ttm, amdgpu and tegra are the bulk, with some minor driver
  fixes.

  No i915 pull this week which may or may not mean I get 2x of it next
  week, we'll see how it goes.

  core:
   - fix VT registration regression

  ttm:
   - fix two fence leaks

  amdgpu:
   - Fix missed mutex unlock in DC error path
   - Fix firmware leak for sdma5
   - DC bpc property fixes

  amdkfd:
   - Fix memleak in an error path

  radeon:
   - Fix copy paste typo in NI DPM spll validation

  rcar-du:
   - build fix

  tegra:
   - add missing zpos property
   - child driver registeration fix
   - debugfs cleanup fix
   - doc fix

  mcde:
   - reorder fbdev setup

  panel:
   - fix connector type
   - fix orienation for some panels

  sun4i:
   - fix dma/iommu configuration

  uvesafb:
   - respect blank flag"

* tag 'drm-fixes-2020-06-26' of git://anongit.freedesktop.org/drm/drm: (25 commits)
  drm/amd: fix potential memleak in err branch
  drm/amd/display: Fix ineffective setting of max bpc property
  drm/amd/display: Enable output_bpc property on all outputs
  drm/amdgpu: add fw release for sdma v5_0
  drm/fb-helper: Fix vt restore
  drm/radeon: fix fb_div check in ni_init_smc_spll_table()
  drm/amdgpu/display: Unlock mutex on error
  drm/sun4i: mixer: Call of_dma_configure if there's an IOMMU
  drm: panel-orientation-quirks: Use generic orientation-data for Acer S1003
  drm: panel-orientation-quirks: Add quirk for Asus T101HA panel
  video: fbdev: uvesafb: fix "noblank" option handling
  drm/panel-simple: fix connector type for newhaven_nhd_43_480272ef_atxl
  drm/panel-simple: fix connector type for LogicPD Type28 Display
  drm: rcar-du: Fix build error
  drm: mcde: Fix forgotten user of drm->dev_private
  drm: mcde: Fix display initialization problem
  drm/tegra: Add zpos property for cursor planes
  gpu: host1x: Detach driver on unregister
  gpu: host1x: Correct trivial kernel-doc inconsistencies
  drm/tegra: hub: Register child devices
  ...

Merge misx fixes from Andrew Morton:
 "31 patches.

  Subsystems affected by this patch series: hotfixes, mm/pagealloc,
  kexec, ocfs2, lib, mm/slab, mm/slab, mm/slub, mm/swap, mm/pagemap,
  mm/vmalloc, mm/memcg, mm/gup, mm/thp, mm/vmscan, x86,
  mm/memory-hotplug, MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (31 commits)
  MAINTAINERS: update info for sparse
  mm/memory_hotplug.c: fix false softlockup during pfn range removal
  mm: remove vmalloc_exec
  arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page
  x86/hyperv: allocate the hypercall page with only read and execute bits
  mm/memory: fix IO cost for anonymous page
  mm/swap: fix for "mm: workingset: age nonresident information alongside anonymous pages"
  mm: workingset: age nonresident information alongside anonymous pages
  doc: THP CoW fault no longer allocate THP
  docs: mm/gup: minor documentation update
  mm/memcontrol.c: prevent missed memory.low load tears
  mm/memcontrol.c: add missed css_put()
  mm: memcontrol: handle div0 crash race condition in memory.low
  mm/vmalloc.c: fix a warning while make xmldocs
  media: omap3isp: remove cacheflush.h
  make asm-generic/cacheflush.h more standalone
  mm/debug_vm_pgtable: fix build failure with powerpc 8xx
  mm/memory.c: properly pte_offset_map_lock/unlock in vm_insert_pages()
  mm: fix swap cache node allocation mask
  slub: cure list_slab_objects() from double fix
  ...

Merge tag 'fpga-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next

FPGA Manager fixes for 5.8-rc1

Here is one (late) fix for 5.8-rc1 merge window.

Arnd's change addresses a missing build dependency.

All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>

* tag 'fpga-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
  fpga: zynqmp: fix modular build

Merge tag 'misc-habanalabs-fixes-2020-06-24' of git://people.freedesktop.org/~gabbayo/linux into char-misc-linus

Oded writes:

This tag contains the following fixes for kernel 5.8-rc2:

- close security hole in GAUDI command buffer parsing by blocking an
  instruction that might allow user to run command buffer that wasn't
  parsed on a secured engine.

- Fix bug in GAUDI MMU cache invalidation code.

- Rename a function to resolve conflict with a static inline function in
  arch/m68k/include/asm/mcfmmu.h

- Increase watchdog timeout of GAUDI QMAN arbitration H/W to prevent false
  reports on timeouts

- Fix bug of dereferencing NULL pointer when an error occurs during command
  submission

- Increase H/W timer for checking if PDMA engine is IDLE in GAUDI.

* tag 'misc-habanalabs-fixes-2020-06-24' of git://people.freedesktop.org/~gabbayo/linux:
  habanalabs: increase h/w timer when checking idle
  habanalabs: Correct handling when failing to enqueue CB
  habanalabs: increase GAUDI QMAN ARB WDT timeout
  habanalabs: rename mmu_write() to mmu_asid_va_write()
  habanalabs: use PI in MMU cache invalidation
  habanalabs: block scalar load_and_exe on external queue

Merge tag 'fixes-for-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v5.8-rc2

A revert of Exynos5422 suspend clock support, it turns out it wasn't
ready to be merged. CDNS3 got a fix for test mode initialization.
Signed-off-by: Felipe Balbi <balbi@kernel.org>

* tag 'fixes-for-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
  usb: gadget: udc: Potential Oops in error handling code
  usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe()
  usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work
  usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
  usb: cdns3: trace: using correct dir value
  usb: cdns3: ep0: fix the test mode set incorrectly

* pm-cpufreq:
  cpufreq: intel_pstate: Add one more OOB control bit

* pm-cpuidle:
  cpuidle: Rearrange s2idle-specific idle state entry code
  PM: s2idle: Clear _TIF_POLLING_NRFLAG before suspend to idle

* acpi-sysfs:
  ACPI: sysfs: Fix pm_profile_attr type

Felipe has based his patches on that tag, so update my usb-linus branch
to it as well so that I can pull his patches in here easier.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

At times when I'm using kgdb I see a splat on my console about
suspicious RCU usage.  I managed to come up with a case that could
reproduce this that looked like this:

  WARNING: suspicious RCU usage
  5.7.0-rc4+ #609 Not tainted
  -----------------------------
  kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection!

  other info that might help us debug this:

    rcu_scheduler_active = 2, debug_locks = 1
  3 locks held by swapper/0/1:
   #0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c
   #1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac
   #2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac

  stack backtrace:
  CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609
  Hardware name: Google Cheza (rev3+) (DT)
  Call trace:
   dump_backtrace+0x0/0x1b8
   show_stack+0x1c/0x24
   dump_stack+0xd4/0x134
   lockdep_rcu_suspicious+0xf0/0x100
   find_task_by_pid_ns+0x5c/0x80
   getthread+0x8c/0xb0
   gdb_serial_stub+0x9d4/0xd04
   kgdb_cpu_enter+0x284/0x7ac
   kgdb_handle_exception+0x174/0x20c
   kgdb_brk_fn+0x24/0x30
   call_break_hook+0x6c/0x7c
   brk_handler+0x20/0x5c
   do_debug_exception+0x1c8/0x22c
   el1_sync_handler+0x3c/0xe4
   el1_sync+0x7c/0x100
   rpmh_rsc_probe+0x38/0x420
   platform_drv_probe+0x94/0xb4
   really_probe+0x134/0x300
   driver_probe_device+0x68/0x100
   __device_attach_driver+0x90/0xa8
   bus_for_each_drv+0x84/0xcc
   __device_attach+0xb4/0x13c
   device_initial_probe+0x18/0x20
   bus_probe_device+0x38/0x98
   device_add+0x38c/0x420

If I understand properly we should just be able to blanket kgdb under
one big RCU read lock and the problem should go away.  We'll add it to
the beast-of-a-function known as kgdb_cpu_enter().

With this I no longer get any splats and things seem to work fine.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeidSigned-off-by: Daniel Thompson <daniel.thompson@linaro.org>

In kgdb context, calling console handlers aren't safe due to locks used
in those handlers which could in turn lead to a deadlock. Although, using
oops_in_progress increases the chance to bypass locks in most console
handlers but it might not be sufficient enough in case a console uses
more locks (VT/TTY is good example).

Currently when a driver provides both polling I/O and a console then kdb
will output using the console. We can increase robustness by using the
currently active polling I/O driver (which should be lockless) instead
of the corresponding console. For several common cases (e.g. an
embedded system with a single serial port that is used both for console
output and debugger I/O) this will result in no console handler being
used.

In order to achieve this we need to reverse the order of preference to
use dbg_io_ops (uses polling I/O mode) over console APIs. So we just
store "struct console" that represents debugger I/O in dbg_io_ops and
while emitting kdb messages, skip console that matches dbg_io_ops
console in order to avoid duplicate messages. After this change,
"is_console" param becomes redundant and hence removed.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/1591264879-25920-5-git-send-email-sumit.garg@linaro.orgReviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

@subbuf is an output parameter of xdr_buf_subsegment(). A survey of
call sites shows that @subbuf is always uninitialized before
xdr_buf_segment() is invoked by callers.

There are some execution paths through xdr_buf_subsegment() that do
not set all of the fields in @subbuf, leaving some pointer fields
containing garbage addresses. Subsequent processing of that buffer
then results in a page fault.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Figuring out the root case for the REMOVE/CLOSE race and
suggesting the solution was done by Neil Brown.

Currently what happens is that direct IO calls hold a reference
on the open context which is decremented as an asynchronous task
in the nfs_direct_complete(). Before reference is decremented,
control is returned to the application which is free to close the
file. When close is being processed, it decrements its reference
on the open_context but since directIO still holds one, it doesn't
sent a close on the wire. It returns control to the application
which is free to do other operations. For instance, it can delete a
file. Direct IO is finally releasing its reference and triggering
an asynchronous close. Which races with the REMOVE. On the server,
REMOVE can be processed before the CLOSE, failing the REMOVE with
EACCES as the file is still opened.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Suggested-by: Neil Brown <neilb@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

If the mirror count changes in the new layout we pick up inside
ff_layout_pg_init_write(), then we can end up adding the
request to the wrong mirror and corrupting the mirror->pg_list.

Fixes: d600ad1f ("NFS41: pop some layoutget errors to application")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The try_location function is called within a loop by nfs_follow_referral.
try_location calls nfs4_pathname_string to created the export_path.
nfs4_pathname_string allocates the memory. export_path is stored in the
nfs_fs_context/fs_context structure similarly as hostname and source.
But whereas the ctx hostname and source are freed before assignment,
export_path is not.  So if there are multiple loops, the new export_path
will overwrite the old without the old being freed.

So call kfree for export_path.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

__rpc_depopulate(gssd_dentry) was lost on error path

cc: stable@vger.kernel.org
Fixes: commit 4b9a445e ("sunrpc: create a new dummy pipe for gssd to hold open")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Conflicts:
	arch/x86/kernel/traps.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>