- 25 Sep, 2017 37 commits
-
-
Thomas Gleixner authored
The target_cpus() callback of the apic struct is not really useful. Some APICs return cpu_online_mask and others cpus_all_mask. The latter is bogus as it does not take holes in the cpus_possible_mask into account. Replace it with cpus_online_mask which makes the most sense and remove the callback. The usage sites will be removed in a later step anyway, so get rid of it now to have incremental changes. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Juergen Gross <jgross@suse.com> Tested-by:
Yu Chen <yu.c.chen@intel.com> Acked-by:
-
Thomas Gleixner authored
The cluster management code creates a cluster mask per cpu, which requires that on cpu on/offline all cluster masks have to be iterated and updated. Other information about the cluster is in different per cpu variables. Create a data structure which holds all information about a cluster and fill it in when the first CPU of a cluster comes online. If another CPU of a cluster comes online it just finds the pointer to the existing cluster structure and reuses it. That simplifies all usage sites and gets rid of quite some pointless iterations over the online cpus to find the cpus which belong to the cluster. Signed-off-by:
-
Thomas Gleixner authored
struct apic has just grown over time by adding function pointers in random places. Reorganize it so it becomes more cache line friendly. Signed-off-by:
-
Thomas Gleixner authored
Move more apic struct specific functions out of the header and the apic management code into the common source file. Signed-off-by:
-
Thomas Gleixner authored
The 32bit and the 64bit implementation of default_cpu_present_to_apicid() and default_check_phys_apicid_present() are exactly the same, but implemented and located differently. Move them to common apic code and get rid of the pointless difference. Signed-off-by:
-
Thomas Gleixner authored
Move more inlines to the place where they belong. Signed-off-by:
-
Thomas Gleixner authored
The apic functions which are used in probe_32.c are implemented as inlines or in apic.c. There is no reason to have them at random places. Move them to the actual usage site and make them static. Signed-off-by:
-
Thomas Gleixner authored
The check is boolean, but the function returns unsigned long for no value. Signed-off-by:
-
Thomas Gleixner authored
The set_apic_id() callback returns an unsigned long value which is handed in to apic_write() as the value argument u32. Adjust the return value so it returns u32 right away. Signed-off-by:
-
Thomas Gleixner authored
These inline functions are used in both the cluster and the physical x2apic code to fill in the function pointers of the apic structure. That means the code is generated twice for no reason. Move it to a C code and reuse it. Signed-off-by:
-
Thomas Gleixner authored
Pick up the dependencies for the vector management rework series.
-
Thomas Gleixner authored
Add tracepoints for the irq bitmap matrix allocator. Signed-off-by:
-
Thomas Gleixner authored
Implement the infrastructure for a simple bitmap based allocator, which will replace the x86 vector allocator. It's in the core code as other architectures might be able to reuse/extend it. For now it only implements allocations for single CPUs, but it's simple to add multi CPU allocation support if required. The concept is rather simple: Global information: system_vector bitmap global accounting PerCPU information: allocation bitmap managed allocation bitmap local accounting The system vector bitmap is used to exclude vectors system wide from the allocation space. The allocation bitmap is used to keep track of per cpu used vectors. The managed allocation bitmap is used to reserve vectors for managed interrupts. When a regular (non managed) interrupt allocation happens then the following rule applies: tmpmap = system_map | alloc_map | managed_map find_zero_bit(tmpmap) Oring the bitmaps together gives the real available space. The same rule applies for reserving a managed interrupt vector. But contrary to the regular interrupts the reservation only marks the bit in the managed map and therefor excludes it from the regular allocations. The managed map is only cleaned out when the a managed interrupt is completely released and it stays alive accross CPU offline/online operations. For managed interrupt allocations the rule is: tmpmap = managed_map & ~alloc_map find_first_bit(tmpmap) This returns the first bit which is in the managed map, but not yet allocated in the allocation map. The allocation marks it in the allocation map and hands it back to the caller for use. The rest of the code are helper functions to handle the various requirements and the accounting which are necessary to replace the x86 vector allocation code. The result is a single patch as the evolution of this infrastructure cannot be represented in bits and pieces. Signed-off-by: -
Thomas Gleixner authored
Allow irqdomains to tell the core code, that after early activation the interrupt needs to be reactivated at request_irq() time. This allows reservation of vectors at early activation time and actual vector assignment at request_irq() time. Signed-off-by:
-
Thomas Gleixner authored
Propagate the early activation mode to the irqdomain activate() callbacks. This is required for the upcoming reservation, late vector assignment scheme, so that the early activation call can act accordingly. Signed-off-by:
-
Thomas Gleixner authored
Allow irq_domain_activate_irq() to fail. This is required to support a reservation and late vector assignment scheme. Signed-off-by:
-
Thomas Gleixner authored
The irq_domain_ops.activate() callback has no return value and no way to tell the function that the activation is early. The upcoming changes to support a reservation scheme which allows to assign interrupt vectors on x86 only when the interrupt is actually requested requires: - A return value, so activation can fail at request_irq() time - Information that the activate invocation is early, i.e. before request_irq(). Signed-off-by: -
Thomas Gleixner authored
Activation of an interrupt and startup are currently a combo functionlity. That works so far, but upcoming changes require a strict separation because the activation can fail in future. Signed-off-by:
-
Thomas Gleixner authored
Managed interrupts should start up in managed shutdown mode. Set the status flag when initialising the irq descriptor. Signed-off-by:
-
Thomas Gleixner authored
In the !IRQ_DOMAIN_HIERARCHY cas the activation stubs are not setting/clearing the activation status bits. This is not a problem at the moment, but upcoming changes require a correct status. Add the set/clear incovations to the stub functions and move them to the core internal header to avoid duplication and visibility outside the core. Signed-off-by:
-
Thomas Gleixner authored
Some interrupt domains like the X86 vector domain has special requirements for debugging, like showing the vector usage on the CPUs. Add a callback to the irqdomain ops which can be filled in by domains which require it and add conditional invocations to the irqdomain and the per irq debug files. Signed-off-by:
-
Thomas Gleixner authored
For debugging the allocation of unused or potentially leaked interrupt descriptor it's helpful to have some information about the site which allocated them. In case of MSI this is simple because the caller hands the device struct pointer into the domain allocation function. Duplicate the device name and show it in the debugfs entry of the interrupt descriptor. Signed-off-by:
-
Thomas Gleixner authored
Currently the debugfs shows only information about actively used interrupts like /proc/irq/ does. That's fine for most cases, but not helpful when internals of allocated, but unused interrupt descriptors have to debugged. It's also useful to provide information about all descriptors so leaks can be debugged in a simpler way. Move the debugfs registration to the descriptor allocation code. Signed-off-by:
-
Alexandru Moise authored
__free_irq() can return a NULL irqaction for example when trying to free already-free IRQ, but the callsite unconditionally dereferences the returned pointer. Fix this by adding a check and return NULL. Signed-off-by:
Alexandru Moise <00moses.alexander00@gmail.com> Signed-off-by:
-
Dou Liyang authored
lapic_is_integrated() is a wrapper around APIC_INTEGRATED(), but not used consistently. Replace the direct usage of APIC_INTEGRATED() and fixup a hard to read tail comment. No functional change. [ tglx: Made it compile and work .... ] Signed-off-by:
Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by:
-
Dou Liyang authored
The macro APIC_INTEGRATED(x) is already wrapped by CONFIG_X86_32. So it can be invoked unconditionally. Remove the extra "#ifdef CONFIG_X86_64...". No functional change. Signed-off-by:
-
Dou Liyang authored
init_bsp_APIC() which works for the virtual wire mode is used in ISA irq initialization at boot time. With the new APIC interrupt delivery mode scheme, which initializes the APIC before the first interrupt is expected, init_bsp_APIC() is not longer required and can be removed. Signed-off-by:
-
Dou Liyang authored
A cold or warm boot through BIOS sets the APIC in default interrupt delivery mode. A dump-capture kernel will not go through a BIOS reset and leave the interrupt delivery mode in the state which was active on the crashed kernel, but the dump kernel startup code assumes default delivery mode which can result in interrupt delivery/handling to fail. To solve this problem, it's required to set up the final interrupt delivery mode as soon as possible. As IOAPIC setup needs the timer initialized for verifying the timer interrupt delivery mode, the earliest point is right after timer setup in late_time_init(). That results in the following init order: 1) Set up the legacy timer, if applicable on the platform 2) Set up APIC/IOAPIC which includes the verification of the legacy timer interrupt delivery. 3) TSC calibration 4) Local APIC timer setup Signed-off-by: -
Dou Liyang authored
X86 and XEN initialize interrupt delivery mode in different way. To avoid conditionals, add a new x86_init_ops function which defaults to the standard function and can be overridden by the early XEN platform code. [ tglx: Folded the XEN part which was a separate patch to preserve bisectability ] Signed-off-by:
-
Dou Liyang authored
timer_irq_works() is used to detects the timer IRQs. It calls mdelay(10) to delay ten ticks and check whether the timer IRQ work or not. mdelay() depends on the loops_per_jiffy which is set up in calibrate_delay(), but the delay calibration depends on a working timer interrupt, which causes a chicken and egg problem. The correct solution is to set up the interrupt mode and making sure that the timer interrupt is delivered correctly before invoking calibrate_delay(). That means that mdelay() cannot be used in timer_irq_works(). Provide helper functions to make a rough delay estimate which is good enough to prove that the timer interrupt is working. Either use TSC or a simple delay loop and assume that 4GHz is the maximum CPU frequency to base the delay calculation on. Signed-off-by:
-
Dou Liyang authored
In UniProcessor kernel with UP_LATE_INIT=y, the interrupt delivery mode is initialized in up_late_init(). Use the new unified apic_intr_mode_init() function and remove APIC_init_uniprocessor(). Signed-off-by:
-
Dou Liyang authored
Calling native_smp_prepare_cpus() to prepare for SMP bootup, does some sanity checking, enables APIC mode and disables SMP feature. Now, APIC mode setup has been unified to apic_intr_mode_init(), some sanity checks are redundant and need to be cleanup. Mark the apic_intr_mode extern to refine the switch and remove the redundant sanity check. Signed-off-by:
-
Dou Liyang authored
On a SMP-capable system, the kernel enables and sets up the APIC interrupt delivery mode in native_smp_prepare_cpus(). The decision how to setup the APIC is intermingled with the decision of setting up SMP or not. Split the initialization of the APIC interrupt mode independent from other decisions and have a separate apic_intr_mode_init() function for it. The invocation time stays the same for now. Signed-off-by:
-
Dou Liyang authored
apic_bsp_setup() sets and returns logical APIC ID for initializing cpu0_logical_apicid in a SMP-capable system. The id has nothing to do with the initialization of local APIC and I/O APIC. And apic_bsp_setup() should be called for interrupt mode setup only. Move the id setup into a separate helper function for cleanup and mark apic_bsp_setup() void. Signed-off-by:
-
Dou Liyang authored
apic_bsp_setup() sets up the local APIC, I/O APIC and APIC timer. The local APIC and I/O APIC setup belongs to interrupt delivery mode setup. Setting up the local APIC timer for booting CPU is another job and has nothing to do with interrupt delivery mode setup. Split local APIC timer setup from the APIC setup, keep it in the original position for SMP and UP kernel for now. Signed-off-by:
-
Dou Liyang authored
There are three places which initialize the interrupt delivery modes: 1) init_bsp_APIC() which is called early might setup the through-local-APIC virtual wire mode on non SMP systems. 2) In an SMP-capable system, native_smp_prepare_cpus() tries to switch to symmetric I/O model. 3) In UP system with UP_LATE_INIT=y, the local APIC and I/O APIC are set up in smp_init(). There is no technical reason to make these initializations at random places and run the kernel with the potentially wrong mode through the early boot stage, but it has a problematic side effect: The late switch to symmetric I/O mode causes dump-capture kernel to hang when the kernel command line option 'notsc' is active. Provide a new function to unify that three positions. Preparatory patch to initialize an interrupt mode directly. Signed-off-by:
-
Dou Liyang authored
There are quite some switches which are used to determine the final interrupt delivery mode, as shown below: 1) Kconfig: CONFIG_X86_64; CONFIG_X86_LOCAL_APIC; CONFIG_x86_IO_APIC 2) Command line options: disable_apic; skip_ioapic_setup 3) CPU Capability: boot_cpu_has(X86_FEATURE_APIC) 4) MP table: smp_found_config 5) ACPI: acpi_lapic; acpi_ioapic; nr_ioapic These switches are disordered and scattered and there are also some dependencies between them. These make the code difficult to maintain and read. Construct a selector to unify them into a single function, then, Use this selector to get an interrupt delivery mode directly. Signed-off-by:
-
- 24 Sep, 2017 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull DeviceTree fixes from Rob Herring: - fix build for !OF providing empty of_find_device_by_node - fix Abracon vendor prefix - sync dtx_diff include paths (again) - a stm32h7 clock binding doc fix * tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: clk: stm32h7: fix clock-cell size scripts/dtc: dtx_diff - 2nd update of include dts paths to match build dt-bindings: fix vendor prefix for Abracon of: provide inline helper for of_find_device_by_node
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Another round of CR3/PCID related fixes (I think this addresses all but one of the known problems with PCID support), an objtool fix plus a Clang fix that (finally) solves all Clang quirks to build a bootable x86 kernel as-is" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Fix inline asm call constraints for Clang objtool: Handle another GCC stack pointer adjustment bug x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code x86/mm: Factor out CR3-building code
-
