Pull sound fixes from Takashi Iwai:
 "Things got calmed down for rc6, as it seems, and we have only a few
  HD-audio fixes at this time: a fix for Skylake codec probe errors, a
  fix for missing interrupt handling, and a few Dell and HP quirks"

* tag 'sound-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Loop interrupt handling until really cleared
  ALSA: hda - Fix headset support and noise on HP EliteBook 755 G2
  ALSA: hda - Fixup speaker pass-through control for nid 0x14 on ALC225
  ALSA: hda - Fixing background noise on Dell Inspiron 3162
  ALSA: hda - Apply clock gate workaround to Skylake, too

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are two reverts of recent PCI-related ACPI core changes (one of
  which caused some systems to crash on boot and the other was a cleanup
  on top of it) and a devfreq fix for Tegra.

  Specifics:

   - Revert an ACPI core change related to IRQ management in PCI that
     introduced code relying on the use of kmalloc() which turned out to
     also run during early init when that's not available yet and caused
     some systems to crash on boot for this reason along with a cleanup
     on top of it (Rafael Wysocki).

   - Prevent devfreq from flooding the kernel log with useless messages
     on Tegra (which started to happen after some recent changes in the
     devfreq core) by fixing the driver to follow the documentation and
     the core's expectations in its ->target callback (Tomeu Vizoso)"

* tag 'pm+acpi-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI, PCI, irq: remove interrupt count restriction"
  Revert "ACPI / PCI: Simplify acpi_penalize_isa_irq()"
  PM / devfreq: tegra: Set freq in rate callback

* pm-devfreq:
  PM / devfreq: tegra: Set freq in rate callback

* acpi-pci:
  Revert "ACPI, PCI, irq: remove interrupt count restriction"
  Revert "ACPI / PCI: Simplify acpi_penalize_isa_irq()"

Currently the interrupt handler of HD-audio driver assumes that no irq
update is needed while processing the irq.  But in reality, it has
been confirmed that the HW irq is issued even during the irq
handling.  Since we clear the irq status at the beginning, process the
interrupt, then exits from the handler, the lately issued interrupt is
left untouched without being properly processed.

This patch changes the interrupt handler code to loop over the
check-and-process.  The handler tries repeatedly as long as the IRQ
status are turned on, and either stream or CORB/RIRB is handled.

For checking the stream handling, snd_hdac_bus_handle_stream_irq()
returns a value indicating the stream indices bits.  Other than that,
the change is only in the irq handler itself.
Reported-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'trace-fixes-v4.5-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Another small bug reported to me by Chunyu Hu.

  When perf added a "reg" function to the function tracing event (not a
  tracepoint), it caused that event to be displayed as a tracepoint and
  could cause errors in tracepoint handling.  That was solved by adding
  a flag to ignore ftrace non-tracepoint events.  But that flag was
  missed when displaying events in available_events, which should only
  contain tracepoint events.

  This broke a documented way to enable all events with:

      cat available_events > set_event

  As the function non-tracepoint event would cause that to error out.
  The commit here fixes that by having the available_events file not
  list events that have the ignore flag set"

* tag 'trace-fixes-v4.5-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix showing function event in available_events

Pull KVM fixes from Paolo Bonzini:
 "KVM/ARM fixes:
   - Fix per-vcpu vgic bitmap allocation
   - Do not give copy random memory on MMIO read
   - Fix GICv3 APR register restore order

  KVM/x86 fixes:
   - Fix ubsan warning
   - Fix hardware breakpoints in a guest vs. preempt notifiers
   - Fix Hurd

  Generic:
   - use __GFP_NOWARN together with GFP_NOWAIT"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: MMU: fix ubsan index-out-of-range warning
  arm64: KVM: vgic-v3: Restore ICH_APR0Rn_EL2 before ICH_APR1Rn_EL2
  KVM: async_pf: do not warn on page allocation failures
  KVM: x86: fix conversion of addresses to linear in 32-bit protected mode
  KVM: x86: fix missed hardware breakpoints
  arm/arm64: KVM: Feed initialized memory to MMIO accesses
  KVM: arm/arm64: vgic: Ensure bitmaps are long enough

Merge tag 'renesas-sh-drivers-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

Pull SuperH driver fix from Simon Horman:
 "Restore legacy clock domain on SuperH platforms"

* tag 'renesas-sh-drivers-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  drivers: sh: Restore legacy clock domain on SuperH platforms

Pull powerpc fixes from Michael Ellerman:
 - eeh: Fix partial hotplug criterion from Gavin Shan
 - mm: Clear the invalid slot information correctly from Aneesh Kumar K.V

* tag 'powerpc-4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/hash: Clear the invalid slot information correctly
  powerpc/eeh: Fix partial hotplug criterion

Pull s390 bugfixes from Martin Schwidefsky:
 "Two critical bug fixes for the signal handling"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/fpu: signals vs. floating point control register
  s390/compat: correct restore of high gprs on signal return

Pull nfsd bugfix from Bruce Fields:
 "One fix for a bug that could cause a NULL write past the end of a
  buffer in case of unusually long writes to some system interfaces used
  by mountd and other nfs support utilities"

* tag 'nfsd-4.5-1' of git://linux-nfs.org/~bfields/linux:
  sunrpc/cache: fix off-by-one in qword_get()

Pull drm fixes from Dave Airlie:
 "This is a bit larger than Id like, but I asked the Intel guys to pull
  in some Skylake fixes in the possibly vain hope that Skylake might be
  more functional now that I'm seeing production hardware shipping.

  For i915, it's mostly the same patch in a few places, making sure the
  hw doesn't turn off when we are programming it.

  Apart from that are two nouveau fixes, one for a module defer bug, and
  one for using nouveau on new Lenovo P50 models.

  Then there are a bunch of AMDGPU fixes, one is a fix for v4.4 vblank
  regressions, and some PM fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits)
  drm/nouveau/disp/dp: ensure sink is powered up before attempting link training
  drm/nouveau: platform: Fix deferred probe
  drm/amdgpu: disable direct VM updates when vm_debug is set
  amdgpu: fix NULL pointer dereference at tonga_check_states_equal
  drm/i915/gen9: Verify and enforce dc6 state writes
  drm/i915/gen9: Check for DC state mismatch
  drm/radeon/pm: adjust display configuration after powerstate
  drm/amdgpu/pm: adjust display configuration after powerstate
  drm/amdgpu/pm: add some checks for PX
  drm/amdgpu: fix locking in force performance level
  drm/amdgpu/gfx8: fix priv reg interrupt enable
  drm/i915/skl: Ensure HW is powered during DDB HW state readout
  drm/i915/lvds: Ensure the HW is powered during HW state readout
  drm/i915/hdmi: Ensure the HW is powered during HW state readout
  drm/i915/dsi: Ensure the HW is powered during HW state readout
  drm/i915/dp: Ensure the HW is powered during HW state readout
  drm/i915: Ensure the HW is powered when accessing the CRC HW block
  drm/i915/ddi: Ensure the HW is powered during HW state readout
  drm/i915/crt: Ensure the HW is powered during HW state readout
  drm/i915: Ensure the HW is powered during HW access in assert_pipe
  ...

Pull libnvdimm fixes from Dan Williams:

 - Two fixes for compatibility with the ACPI 6.1 specification.

   Without these fixes multi-interface DIMMs will fail to be probed, and
   address range scrub commands to find memory errors will give results
   that the kernel will mis-interpret.  For multi-interface DIMMs Linux
   will accept either the original 6.0 implementation or 6.1.

   For address range scrub we'll only support 6.1 since ACPI formalized
   this DSM differently than the original example [1] implemented in
   v4.2.  The expectation is that production systems will only ever ship
   the ACPI 6.1 address range scrub command definition.

 - The wider async address range scrub work targeting 4.6 discovered
   that the original synchronous implementation in 4.5 is not sizing its
   return buffer correctly.

 - Arnd caught that my recent fix to the size of the pfn_t flags missed
   updating the flags variable used in the pmem driver.

 - Toshi found that we mishandle the memremap() return value in
   devm_memremap().

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm: use 'u64' for pfn flags
  devm_memremap: Fix error value when memremap failed
  nfit: update address range scrub commands to the acpi 6.1 format
  libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing
  nfit: fix multi-interface dimm handling, acpi6.1 compatibility

Pull power supply fixes from Sebastian Reichel:
 "Add a regression fix for changed sysfs path of bq27xxx_battery and
  update MAINTAINERS file"

* tag 'for-v4.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: bq27xxx_battery: Restore device name
  MAINTAINERS: update bq27xxx driver

HP EliteBook 755 G2 with ALC3228 (ALC280) codec [103c:221c] requires
the known fixup (ALC269_FIXUP_HEADSET_MIC) for making the headset mic
working.  Also, it suffers from the loopback noise problem, so we
should disable aamix path as well.
Reported-by: Derick Eddington <derick.eddington@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

On one of the machines we enable, we found that the actual speaker volume
did not always correspond to the volume set in alsamixer. This patch
fixes that problem.

This patch was orginally written by Kailang @ Realtek, I've rebased it
to fit sound git master.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1549660Co-Authored-By: Kailang <kailang@realtek.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'kvm-arm-for-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/ARM fixes for 4.5-rc6

- Fix per-vcpu vgic bitmap allocation
- Do not give copy random memory on MMIO read
- Fix GICv3 APR register restore order

Ubsan reports the following warning due to a typo in
update_accessed_dirty_bits template, the patch fixes
the typo:

[  168.791851] ================================================================================
[  168.791862] UBSAN: Undefined behaviour in arch/x86/kvm/paging_tmpl.h:252:15
[  168.791866] index 4 is out of range for type 'u64 [4]'
[  168.791871] CPU: 0 PID: 2950 Comm: qemu-system-x86 Tainted: G           O L  4.5.0-rc5-next-20160222 #7
[  168.791873] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013
[  168.791876]  0000000000000000 ffff8801cfcaf208 ffffffff81c9f780 0000000041b58ab3
[  168.791882]  ffffffff82eb2cc1 ffffffff81c9f6b4 ffff8801cfcaf230 ffff8801cfcaf1e0
[  168.791886]  0000000000000004 0000000000000001 0000000000000000 ffffffffa1981600
[  168.791891] Call Trace:
[  168.791899]  [<ffffffff81c9f780>] dump_stack+0xcc/0x12c
[  168.791904]  [<ffffffff81c9f6b4>] ? _atomic_dec_and_lock+0xc4/0xc4
[  168.791910]  [<ffffffff81da9e81>] ubsan_epilogue+0xd/0x8a
[  168.791914]  [<ffffffff81daafa2>] __ubsan_handle_out_of_bounds+0x15c/0x1a3
[  168.791918]  [<ffffffff81daae46>] ? __ubsan_handle_shift_out_of_bounds+0x2bd/0x2bd
[  168.791922]  [<ffffffff811287ef>] ? get_user_pages_fast+0x2bf/0x360
[  168.791954]  [<ffffffffa1794050>] ? kvm_largepages_enabled+0x30/0x30 [kvm]
[  168.791958]  [<ffffffff81128530>] ? __get_user_pages_fast+0x360/0x360
[  168.791987]  [<ffffffffa181b818>] paging64_walk_addr_generic+0x1b28/0x2600 [kvm]
[  168.792014]  [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm]
[  168.792019]  [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350
[  168.792044]  [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm]
[  168.792076]  [<ffffffffa181c36d>] paging64_gva_to_gpa+0x7d/0x110 [kvm]
[  168.792121]  [<ffffffffa181c2f0>] ? paging64_walk_addr_generic+0x2600/0x2600 [kvm]
[  168.792130]  [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[  168.792178]  [<ffffffffa17d9a4a>] emulator_read_write_onepage+0x27a/0x1150 [kvm]
[  168.792208]  [<ffffffffa1794d44>] ? __kvm_read_guest_page+0x54/0x70 [kvm]
[  168.792234]  [<ffffffffa17d97d0>] ? kvm_task_switch+0x160/0x160 [kvm]
[  168.792238]  [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[  168.792263]  [<ffffffffa17daa07>] emulator_read_write+0xe7/0x6d0 [kvm]
[  168.792290]  [<ffffffffa183b620>] ? em_cr_write+0x230/0x230 [kvm]
[  168.792314]  [<ffffffffa17db005>] emulator_write_emulated+0x15/0x20 [kvm]
[  168.792340]  [<ffffffffa18465f8>] segmented_write+0xf8/0x130 [kvm]
[  168.792367]  [<ffffffffa1846500>] ? em_lgdt+0x20/0x20 [kvm]
[  168.792374]  [<ffffffffa14db512>] ? vmx_read_guest_seg_ar+0x42/0x1e0 [kvm_intel]
[  168.792400]  [<ffffffffa1846d82>] writeback+0x3f2/0x700 [kvm]
[  168.792424]  [<ffffffffa1846990>] ? em_sidt+0xa0/0xa0 [kvm]
[  168.792449]  [<ffffffffa185554d>] ? x86_decode_insn+0x1b3d/0x4f70 [kvm]
[  168.792474]  [<ffffffffa1859032>] x86_emulate_insn+0x572/0x3010 [kvm]
[  168.792499]  [<ffffffffa17e71dd>] x86_emulate_instruction+0x3bd/0x2110 [kvm]
[  168.792524]  [<ffffffffa17e6e20>] ? reexecute_instruction.part.110+0x2e0/0x2e0 [kvm]
[  168.792532]  [<ffffffffa14e9a81>] handle_ept_misconfig+0x61/0x460 [kvm_intel]
[  168.792539]  [<ffffffffa14e9a20>] ? handle_pause+0x450/0x450 [kvm_intel]
[  168.792546]  [<ffffffffa15130ea>] vmx_handle_exit+0xd6a/0x1ad0 [kvm_intel]
[  168.792572]  [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm]
[  168.792597]  [<ffffffffa17f6bcd>] kvm_arch_vcpu_ioctl_run+0xd3d/0x6090 [kvm]
[  168.792621]  [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm]
[  168.792627]  [<ffffffff8293b530>] ? __ww_mutex_lock_interruptible+0x1630/0x1630
[  168.792651]  [<ffffffffa17f5e90>] ? kvm_arch_vcpu_runnable+0x4f0/0x4f0 [kvm]
[  168.792656]  [<ffffffff811eeb30>] ? preempt_notifier_unregister+0x190/0x190
[  168.792681]  [<ffffffffa17e0447>] ? kvm_arch_vcpu_load+0x127/0x650 [kvm]
[  168.792704]  [<ffffffffa178e9a3>] kvm_vcpu_ioctl+0x553/0xda0 [kvm]
[  168.792727]  [<ffffffffa178e450>] ? vcpu_put+0x40/0x40 [kvm]
[  168.792732]  [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350
[  168.792735]  [<ffffffff82946087>] ? _raw_spin_unlock+0x27/0x40
[  168.792740]  [<ffffffff8163a943>] ? handle_mm_fault+0x1673/0x2e40
[  168.792744]  [<ffffffff8129daa8>] ? trace_hardirqs_on_caller+0x478/0x6c0
[  168.792747]  [<ffffffff8129dcfd>] ? trace_hardirqs_on+0xd/0x10
[  168.792751]  [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[  168.792756]  [<ffffffff81725a80>] do_vfs_ioctl+0x1b0/0x12b0
[  168.792759]  [<ffffffff817258d0>] ? ioctl_preallocate+0x210/0x210
[  168.792763]  [<ffffffff8174aef3>] ? __fget+0x273/0x4a0
[  168.792766]  [<ffffffff8174acd0>] ? __fget+0x50/0x4a0
[  168.792770]  [<ffffffff8174b1f6>] ? __fget_light+0x96/0x2b0
[  168.792773]  [<ffffffff81726bf9>] SyS_ioctl+0x79/0x90
[  168.792777]  [<ffffffff82946880>] entry_SYSCALL_64_fastpath+0x23/0xc1
[  168.792780] ================================================================================
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

After login to the desktop on Dell Inspiron 3162,
there's a very loud background noise comes from the builtin speaker.
The noise does not go away even if the speaker is muted.

The noise disappears after using the aamix fixup.

Codec: Realtek ALC3234
Address: 0
AFG Function Id: 0x1 (unsol 1)
    Vendor Id: 0x10ec0255
    Subsystem Id: 0x10280725
    Revision Id: 0x100002
    No Modem Function Group found

BugLink: http://bugs.launchpad.net/bugs/1549620Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

single for for eDP panel issues on Lenovo P50
* 'linux-4.5' of git://github.com/skeggsb/linux:
  drm/nouveau/disp/dp: ensure sink is powered up before attempting link training

This can happen under some annoying circumstances, and is a quick fix
until more substantial changes can be made.

Fixed eDP mode changes on (at least) the Lenovo P50.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

The error cleanup paths aren't quite correct and will crash upon
deferred probe.

Cc: stable@vger.kernel.org # v4.3+
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

CONFIG_ARCH_SHMOBILE is not only enabled for Renesas ARM platforms
(which are DT based and multi-platform), but also on a select set of
Renesas SuperH platforms (SH7722/SH7723/SH7724/SH7343/SH7366). Hence
since commit 0ba58de2 ("drivers: sh: Get rid of
CONFIG_ARCH_SHMOBILE_MULTI"), the legacy clock domain is no longer
installed on these SuperH platforms, and module clocks may not be
enabled when needed, leading to driver failures.

To fix this, add an additional check for CONFIG_OF.

Fixes: 0ba58de2 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This is a bit large, but it really helps Skylake bugs we are seeing
on a number of laptops.

Most of the commits are quite similar, ensuring the display power
doesn't vanish under us during hardware access. Also do note that it's
not just Skylake that's affected.

* tag 'drm-intel-fixes-2016-02-22' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/gen9: Verify and enforce dc6 state writes
  drm/i915/gen9: Check for DC state mismatch
  drm/i915/skl: Ensure HW is powered during DDB HW state readout
  drm/i915/lvds: Ensure the HW is powered during HW state readout
  drm/i915/hdmi: Ensure the HW is powered during HW state readout
  drm/i915/dsi: Ensure the HW is powered during HW state readout
  drm/i915/dp: Ensure the HW is powered during HW state readout
  drm/i915: Ensure the HW is powered when accessing the CRC HW block
  drm/i915/ddi: Ensure the HW is powered during HW state readout
  drm/i915/crt: Ensure the HW is powered during HW state readout
  drm/i915: Ensure the HW is powered during HW access in assert_pipe
  drm/i915: Ensure the HW is powered when disabling VGA
  drm/i915/ibx: Ensure the HW is powered during PLL HW readout
  drm/i915: Ensure the HW is powered during display pipe HW readout
  drm/i915: Add helper to get a display power ref if it was already enabled

A few radeon and amdgpu fixes for 4.5.  A few further fixes for the vblank
regressions in 4.4 and a couple of other minor fixes.

* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: disable direct VM updates when vm_debug is set
  amdgpu: fix NULL pointer dereference at tonga_check_states_equal
  drm/radeon/pm: adjust display configuration after powerstate
  drm/amdgpu/pm: adjust display configuration after powerstate
  drm/amdgpu/pm: add some checks for PX
  drm/amdgpu: fix locking in force performance level
  drm/amdgpu/gfx8: fix priv reg interrupt enable
  drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc.
  drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)

Pull ARC fixes from Vineet Gupta:
 - Fix for csd deadlock due to missing self IPI
 - Accompanying IPI cleanups / optimization
 - Brown paper bag bug in one of the cleanups above
 - Boot reporting updates for new hardware features
 - Don't force DEVTMPFS if INITRAMFS

* tag 'arc-4.5-rc6-fixes-upd' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arc: SMP: CONFIG_ARC_IPI_DBG cleanup
  ARC: SMP: No need for CONFIG_ARC_IPI_DBG
  ARCv2: Elide sending new cross core intr if receiver didn't ack prev
  ARCv2: SMP: Push IPI_IRQ into IPI provider
  ARC: [intc-compact] Remove IPI setup from ARCompact port
  ARCv2: SMP: Emulate IPI to self using software triggered interrupt
  arc: get rid of DEVTMPFS dependency on INITRAMFS_SOURCE
  ARCv2: boot report CCMs (Closely Coupled Memories)
  ARCv2: boot print Low Latency Memory
  ARC: Assume multiplier is always present

Pull vfs fixes from Al Viro:
 "Assorted fixes - xattr one from this cycle, the rest - stable fodder"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/pnode.c: treat zero mnt_group_id-s as unequal
  affs_do_readpage_ofs(): just use kmap_atomic() around memcpy()
  xattr handlers: plug a lock leak in simple_xattr_list
  fs: allow no_seek_end_llseek to actually seek

Sebastian Ott and Gerald Schaefer reported random crashes on s390.
It was bisected to my THP refcounting patchset.

The problem is that pmdp_invalidated() called with wrong virtual
address. It got offset up by HPAGE_PMD_SIZE by loop over ptes.

The solution is to introduce new variable to be used in loop and don't
touch 'haddr'.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-and-tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reported-and-tested-by Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

That should make user space bugs more obvious.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

The event_data passed from pem_fini was not cleared upon initialization.
This caused NULL checks to pass and cast_const_phw_tonga_power_state to
attempt to dereference an invalid pointer. Clear the event_data in
pem_init and pem_fini before calling pem_handle_event.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Bradley Pankow <btpankow@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The GICv3 architecture spec says:

Writing to the active priority registers in any order other than
the following order will result in UNPREDICTABLE behavior:
- ICH_AP0R<n>_EL2.
- ICH_AP1R<n>_EL2.

So let's not pointlessly go against the rule...
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The ftrace:function event is only displayed for parsing the function tracer
data. It is not used to enable function tracing, and does not include an
"enable" file in its event directory.

Originally, this event was kept separate from other events because it did
not have a ->reg parameter. But perf added a "reg" parameter for its use
which caused issues, because it made the event available to functions where
it was not compatible for.

Commit 9b63776f "tracing: Do not enable function event with enable"
added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event
from being enabled by normal trace events. But this commit missed keeping
the function event from being displayed by the "available_events" directory,
which is used to show what events can be enabled by set_event.

One documented way to enable all events is to:

 cat available_events > set_event

But because the function event is displayed in the available_events, this
now causes an INVALID error:

 cat: write error: Invalid argument
Reported-by: Chunyu Hu <chuhu@redhat.com>
Fixes: 9b63776f "tracing: Do not enable function event with enable"
Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

In async_pf we try to allocate with NOWAIT to get an element quickly
or fail. This code also handle failures gracefully. Lets silence
potential page allocation failures under load.

qemu-system-s39: page allocation failure: order:0,mode:0x2200000
[...]
Call Trace:
([<00000000001146b8>] show_trace+0xf8/0x148)
[<000000000011476a>] show_stack+0x62/0xe8
[<00000000004a36b8>] dump_stack+0x70/0x98
[<0000000000272c3a>] warn_alloc_failed+0xd2/0x148
[<000000000027709e>] __alloc_pages_nodemask+0x94e/0xb38
[<00000000002cd36a>] new_slab+0x382/0x400
[<00000000002cf7ac>] ___slab_alloc.constprop.30+0x2dc/0x378
[<00000000002d03d0>] kmem_cache_alloc+0x160/0x1d0
[<0000000000133db4>] kvm_setup_async_pf+0x6c/0x198
[<000000000013dee8>] kvm_arch_vcpu_ioctl_run+0xd48/0xd58
[<000000000012fcaa>] kvm_vcpu_ioctl+0x372/0x690
[<00000000002f66f6>] do_vfs_ioctl+0x3be/0x510
[<00000000002f68ec>] SyS_ioctl+0xa4/0xb8
[<0000000000781c5e>] system_call+0xd6/0x264
[<000003ffa24fa06a>] 0x3ffa24fa06a

Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit e8dd2d2d ("Silence compiler warning in arch/x86/kvm/emulate.c",
2015-09-06) broke boot of the Hurd.  The bug is that the "default:"
case actually could modify "la", but after the patch this change is
not reflected in *linear.

The bug is visible whenever a non-zero segment base causes the linear
address to wrap around the 4GB mark.

Fixes: e8dd2d2d
Cc: stable@vger.kernel.org
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Sometimes when setting a breakpoint a process doesn't stop on it.
This is because the debug registers are not loaded correctly on
VCPU load.

The following simple reproducer from Oleg Nesterov tries using debug
registers in two threads.  To see the bug, run a 2-VCPU guest with
"taskset -c 0" and run "./bp 0 1" inside the guest.

    #include <unistd.h>
    #include <signal.h>
    #include <stdlib.h>
    #include <stdio.h>
    #include <sys/wait.h>
    #include <sys/ptrace.h>
    #include <sys/user.h>
    #include <asm/debugreg.h>
    #include <assert.h>

    #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)

    unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len)
    {
        unsigned long dr7;

        dr7 = ((len | type) & 0xf)
            << (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE);
        if (enable)
            dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE));

        return dr7;
    }

    int write_dr(int pid, int dr, unsigned long val)
    {
        return ptrace(PTRACE_POKEUSER, pid,
                offsetof (struct user, u_debugreg[dr]),
                val);
    }

    void set_bp(pid_t pid, void *addr)
    {
        unsigned long dr7;
        assert(write_dr(pid, 0, (long)addr) == 0);
        dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1);
        assert(write_dr(pid, 7, dr7) == 0);
    }

    void *get_rip(int pid)
    {
        return (void*)ptrace(PTRACE_PEEKUSER, pid,
                offsetof(struct user, regs.rip), 0);
    }

    void test(int nr)
    {
        void *bp_addr = &&label + nr, *bp_hit;
        int pid;

        printf("test bp %d\n", nr);
        assert(nr < 16); // see 16 asm nops below

        pid = fork();
        if (!pid) {
            assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0);
            kill(getpid(), SIGSTOP);
            for (;;) {
                label: asm (
                    "nop; nop; nop; nop;"
                    "nop; nop; nop; nop;"
                    "nop; nop; nop; nop;"
                    "nop; nop; nop; nop;"
                );
            }
        }

        assert(pid == wait(NULL));
        set_bp(pid, bp_addr);

        for (;;) {
            assert(ptrace(PTRACE_CONT, pid, 0, 0) == 0);
            assert(pid == wait(NULL));

            bp_hit = get_rip(pid);
            if (bp_hit != bp_addr)
                fprintf(stderr, "ERR!! hit wrong bp %ld != %d\n",
                    bp_hit - &&label, nr);
        }
    }

    int main(int argc, const char *argv[])
    {
        while (--argc) {
            int nr = atoi(*++argv);
            if (!fork())
                test(nr);
        }

        while (wait(NULL) > 0)
            ;
        return 0;
    }

Cc: stable@vger.kernel.org
Suggested-by: Nadav Amit <namit@cs.technion.ac.il>
Reported-by: Andrey Wagin <avagin@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Revert commit b5bd0269 (ACPI, PCI, irq: remove interrupt count
restriction) that introduced a boot regression on some systems
where it caused kmalloc() to be used too early.

Link: http://marc.info/?l=linux-acpi&m=145580159209240&w=2Reported-by: Nalla, Ravikanth <ravikanth.nalla@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Revert commit 09716869 "ACPI / PCI: Simplify acpi_penalize_isa_irq()"
that depends on commit b5bd0269 (ACPI, PCI, irq: remove interrupt
count restriction) which introduced a regression and needs to be
reverted for this reason.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

On an MMIO access, we always copy the on-stack buffer info
the shared "run" structure, even if this is a read access.
This ends up leaking up to 8 bytes of uninitialized memory
into userspace, depending on the size of the access.

An obvious fix for this one is to only perform the copy if
this is an actual write.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Previous Commit ("ARC: SMP: No need for CONFIG_ARC_IPI_DBG") removed
the Kconfig option ARC_IPI_DBG.  Remove the last reference on this
option.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

This was more relevant during SMP bringup.

The warning for bogus msg better be visible always.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>