Skip to content

L
linux
Switch branch/tag
  1. 14 Mar, 2019 2 commits
  3. 13 Mar, 2019 5 commits
  5. 12 Mar, 2019 10 commits
    • Ayan Kumar Halder's avatar
      drm/arm/malidp: Added support for AFBC modifiers for all layers except DE_SMART · 25570b5e
      Ayan Kumar Halder authored 
      The list of modifiers to be supported for each plane has been dynamically generated
from 'malidp_format_modifiers[]' and 'malidp_hw_regmap->features'.

Changes from v1:-
1. Replaced DRM_ERROR() with DRM_DEBUG_KMS() in malidp_format_mod_supported()
to report unsupported modifiers.

Changes from v2:-
1. Removed malidp_format_mod_supported() from the current patch. This has been added
in "PATCH 7/12"
2. Dynamically generate the list of modifiers (to be supported for each plane) from
'malidp_format_modifiers' and features.

Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: default avatarAyan Kumar halder <ayan.halder@arm.com>
Reviewed-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Acked-by: default avatarAlyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291767/?series=57895&rev=1
      25570b5e
    • Ayan Kumar Halder's avatar
      drm/arm/malidp:- Disregard the pitch alignment constraint for AFBC framebuffer. · 0f6c18de
      Ayan Kumar Halder authored 
      Considering the fact that some of the AFBC specific pixel formats are expressed
in bits per pixel (ie bpp which is not byte aligned), the pitch (ie width * bpp)
is not guaranteed to be aligned to burst size (ie 8 or 16 bytes).
For example, DRM_FORMAT_VUY101010 is 30 bits per pixel. For a framebuffer of
width 32 pixels, the pitch will be 120 bytes which is not aligned to burst size
(ie 16 bytes) for DP650.

Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: default avatarAyan Kumar halder <ayan.halder@arm.com>
Acked-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Acked-by: default avatarAlyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291764/?series=57895&rev=1
      0f6c18de
    • Ayan Kumar Halder's avatar
      drm/arm/malidp:- Use the newly introduced malidp_format_get_bpp() instead of... · 7834c577
      Ayan Kumar Halder authored 
      drm/arm/malidp:- Use the newly introduced malidp_format_get_bpp() instead of relying on cpp for calculating framebuffer size

Formats like DRM_FORMAT_VUY101010, DRM_FORMAT_YUV420_8BIT and
DRM_FORMAT_YUV420_10BIT are expressed in bits per pixel as they have a non
integer value of cpp (thus denoted as '0' in drm_format_info[]). Therefore,
the calculation of AFBC framebuffer size needs to use malidp_format_get_bpp().

Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: default avatarAyan Kumar halder <ayan.halder@arm.com>
Reviewed-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Acked-by: default avatarAlyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291766/?series=57895&rev=1
      7834c577
    • Ayan Kumar Halder's avatar
      drm/arm/malidp:- Writeback framebuffer does not support any modifiers · da773658
      Ayan Kumar Halder authored 
      In malidp, the writeback pipeline does not support writing crtc output
to a framebuffer with modifiers ie the memory writeback content is
devoid of any compression or tiling, etc.
So we have added a commit check in memory writeback encoder helper function
to validate if the framebuffer has any modifier and if so, return EINVAL.

Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: default avatarAyan Kumar halder <ayan.halder@arm.com>
Acked-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Acked-by: default avatarAlyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291765/?series=57895&rev=1
      da773658
    • Ayan Kumar Halder's avatar
      drm/arm/malidp: Specified the rotation memory requirements for AFBC YUV formats · b8207562
      Ayan Kumar Halder authored 
      The newly supported AFBC YUV formats have the following rotation memory
constraints (in DP550/DP650).
1. DRM_FORMAT_VUY888/DRM_FORMAT_VUY101010 :- It can rotate upto 8
horizontal lines in the AFBC output buffer.
2. DRM_FORMAT_YUV420_8BIT :- It can rotate upto 16 horizontal lines
in the AFBC output buffer.

Also some of the pixel formats are specified in bits per pixel (rather
than bytes per pixel), so the calculation needs to take note of this.

Besides there are some difference between DP550 and DP650 and these are
as follows:-
1. DRM_FORMAT_X0L2 (in uncompressed format) does not support rotation in
DP550. For DP650, it can rotate upto 16 horizontal lines in the AFBC
output buffer, whereas in DP550 (with AFBC), it can rotate upto 8
horizontal lines.
2. DRM_FORMAT_YUV420_10BIT :- It can rotate upto 8 horizontal lines in
dp550 and 16 horizontal lines in DP650.

Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: default avatarAyan Kumar halder <ayan.halder@arm.com>
Reviewed-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Acked-by: default avatarAlyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291763/?series=57895&rev=1
      b8207562
    • Ayan Kumar Halder's avatar
      drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 · 5e290226
      Ayan Kumar Halder authored 
      We need to define a common list of format modifiers supported by each of
the Mali display processors.

The following are the constraints with AFBC:-

1. AFBC is not supported for the formats defined in
malidp_hw_format_is_linear_only()

2. Some of the formats are supported only with AFBC modifiers. Thus we have
introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies
the same.

3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format.

4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT.

5. CBR should not be set for non-subsampled formats.

6. SMART layer does not support framebuffer with AFBC modifiers.
Return -EINVAL for such a scenario.

7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats.

8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT.
However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT.
This feature has been identified with
MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT.

9. In DP550 and DP650, for YUYV, the hardware supports different
format-ids to be used with and without AFBC modifier. We have used the
feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this
characteristic.

10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have
used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs
which support SPLIT mode.

11. DP550 supports YUV420 with split mode. We have defined the feature
'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic.

Changes since v1:-
- Merged https://patchwork.freedesktop.org/patch/265215/ into this patch
- As Liviu pointed out in the last patch, we can pull the checks outside
of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop
- Rebased

Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: default avatarAyan Kumar halder <ayan.halder@arm.com>
Reviewed-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Acked-by: default avatarAlyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
      5e290226
    • Ayan Kumar Halder's avatar
      drm/arm/malidp:- Added support for new YUV formats for DP500, DP550 and DP650 · ed893860
      Ayan Kumar Halder authored 
      We have added support for some AFBC only pixel formats like :-
DRM_FORMAT_YUV420_8BIT (single plane YUV 420 8 bit format)
DRM_FORMAT_VUY888 (single plane YUV 444 8 bit format)
DRM_FORMAT_VUY101010 (single plane YUV 444 10 bit format)
DRM_FORMAT_YUV420_10BIT (single plane YUV 420 10 bit format)

Generally, these formats are supported by our hardware using the same
hw-ids as the equivalent multi plane pixel formats.

Also we have added support for XYUV 444 8 and 10 bit formats

Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: default avatarAyan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Acked-by: default avatarAlyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291761/?series=57895&rev=1
      ed893860
    • Ayan Kumar Halder's avatar
      drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier · 54b4260a
      Ayan Kumar Halder authored 
      Added the AFBC decoder registers for DP500 , DP550 and DP650.
These registers control the processing of AFBC buffers. It controls various
features like AFBC decoder enable, lossless transformation and block split
as well as setting of the left, right, top and bottom cropping of AFBC
buffers (in number of pixels).
All the layers (except DE_SMART) support framebuffers with AFBC modifiers.
One needs to set the pixel values of the top, left, bottom and right
cropping for the AFBC framebuffer.
Cropping an AFBC framebuffer is controlled by the AFBC crop registers.
In that case, the layer input size registers should be configured with
framebuffer's dimensions and not with drm_plane_state source width/height
values (which is used for non AFBC framebuffer to denote cropping).

Changes from v1:
 - Removed the "if (fb->modifier)" check from malidp_de_plane_update()
and added it in malidp_de_set_plane_afbc(). This will consolidate all the
AFBC specific register configurations in a single function ie
malidp_de_set_plane_afbc().

Changes from v2:
 - For AFBC framebuffer, layer input size register should be set to
framebuffer's width and height.

Changes from v3:
- Rebased on top of latest drm-misc-next
- Some cleanups/sanity changes based on Liviu's comments

Changes from v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: default avatarAyan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Acked-by: default avatarAlyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
      54b4260a
    • Ayan Kumar Halder's avatar
      drm: Added a new format DRM_FORMAT_XVYU2101010 · e9961ab9
      Ayan Kumar Halder authored 
      This new format is supported by DP550 and DP650

Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: default avatarAyan Kumar halder <ayan.halder@arm.com>
Reviewed-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Acked-by: default avatarAlyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291758/?series=57895&rev=1
      e9961ab9
    • Brian Starkey's avatar
      drm/fourcc: Add AFBC yuv fourccs for Mali · 7ba0fee2
      Brian Starkey authored 
      As we look to enable AFBC using DRM format modifiers, we run into
problems which we've historically handled via vendor-private details
(i.e. gralloc, on Android).

AFBC (as an encoding) is fully flexible, and for example YUV data can
be encoded into 1, 2 or 3 encoded "planes", much like the linear
equivalents. Component order is also meaningful, as AFBC doesn't
necessarily care about what each "channel" of the data it encodes
contains. Therefore ABGR8888 and RGBA8888 can be encoded in AFBC with
different representations. Similarly, 'X' components may be encoded
into AFBC streams in cases where a decoder expects to decode a 4th
component.

In addition, AFBC is a licensable IP, meaning that to support the
ecosystem we need to ensure that _all_ AFBC users are able to describe
the encodings that they need. This is much better achieved by
preserving meaning in the fourcc codes when they are combined with an
AFBC modifier.

In essence, we want to use the modifier to describe the parameters of
the AFBC encode/decode, and use the fourcc code to describe the data
being encoded/decoded.

To do anything different would be to introduce redundancy - we would
need to duplicate in the modifier information which is _already_
conveyed clearly and non-ambigiously by a fourcc code.

I hope that for RGB this is non-controversial.
(BGRA8888 + MODIFIER_AFBC) is a different format from
(RGBA8888 + MODIFIER_AFBC).

Possibly more controversial is that (XBGR8888 + MODIFIER_AFBC)
is different from (BGR888 + MODIFIER_AFBC). I understand that in some
schemes it is not the case - but in AFBC it is so.

Where we run into problems is where there are not already fourcc codes
which represent the data which the AFBC encoder/decoder is processing.
To that end, we want to introduce new fourcc codes to describe the
data being encoded/decoded, in the places where none of the existing
fourcc codes are applicable.

Where we don't support an equivalent non-compressed layout, or where
no "obvious" linear layout exists, we are proposing adding fourcc
codes which have no associated linear layout - because any layout we
proposed would be completely arbitrary.

Some formats are following the naming conventions from [2].

The summary of the new formats is:
 DRM_FORMAT_VUY888 - Packed 8-bit YUV 444. Y followed by U then V.
 DRM_FORMAT_VUY101010 - Packed 10-bit YUV 444. Y followed by U then
                        V. No defined linear encoding.
 DRM_FORMAT_Y210 - Packed 10-bit YUV 422. Y followed by U (then Y)
                   then V. 10-bit samples in 16-bit words.
 DRM_FORMAT_Y410 - Packed 10-bit YUV 444, with 2-bit alpha.
 DRM_FORMAT_P210 - Semi-planar 10-bit YUV 422. Y plane, followed by
                   interleaved U-then-V plane. 10-bit samples in
                   16-bit words.
 DRM_FORMAT_YUV420_8BIT - Packed 8-bit YUV 420. Y followed by U then
                          V. No defined linear encoding
 DRM_FORMAT_YUV420_10BIT - Packed 10-bit YUV 420. Y followed by U
                           then V. No defined linear encoding

Please also note that in the absence of AFBC, we would still need to
add Y410, Y210 and P210.

Full rationale follows:

YUV 444 8-bit, 1-plane
----------------------
 The currently defined AYUV format encodes a 4th alpha component,
 which makes it unsuitable for representing a 3-component YUV 444
 AFBC stream.

 The proposed[1] XYUV format which is supported by Mali-DP in linear
 layout is also unsuitable, because the component order is the
 opposite of the AFBC version, and it encodes a 4th 'X' component.

 DRM_FORMAT_VUY888 is the "obvious" format for a 3-component, packed,
 YUV 444 8-bit format, with the component order which our HW expects to
 encode/decode. It conforms to the same naming convention as the
 existing packed YUV 444 format.
 The naming here is meant to be consistent with DRM_FORMAT_AYUV and
 DRM_FORMAT_XYUV[1]

YUV 444 10-bit, 1-plane
-----------------------
 There is no currently-defined YUV 444 10-bit format in
 drm_fourcc.h, irrespective of number of planes.

 The proposed[1] XVYU2101010 format which is supported by Mali-DP in
 linear layout uses the wrong component order, and also encodes a 4th
 'X' component, which doesn't match the AFBC version of YUV 444
 10-bit which we support.

 DRM_FORMAT_Y410 is the same layout as XVYU2101010, but with 2 bits of
 alpha.  This format is supported with linear layout by Mali GPUs. The
 naming follows[2].

 There is no "obvious" linear encoding for a 3-component 10:10:10
 packed format, and so DRM_FORMAT_VUY101010 defines a component
 order, but not a bit encoding. Again, the naming is meant to be
 consistent with DRM_FORMAT_AYUV.

YUV 422 8-bit, 1-plane
----------------------
 The existing DRM_FORMAT_YUYV (and the other component orders) are
 single-planar YUV 422 8-bit formats. Following the convention of
 the component orders of the RGB formats, YUYV has the correct
 component order for our AFBC encoding (Y followed by U followed by
 V). We can use YUYV for AFBC YUV 422 8-bit.

YUV 422 10-bit, 1-plane
-----------------------
 There is no currently-defined YUV 422 10-bit format in drm_fourcc.h

 DRM_FORMAT_Y210 is analogous to YUYV, but with 10-bits per sample
 packed into the upper 10-bits of 16-bit samples. This format is
 supported in both linear and AFBC by Mali GPUs.

YUV 422 10-bit, 2-plane
-----------------------
 The recently defined DRM_FORMAT_P010 format is a 10-bit semi-planar
 YUV 420 format, which has the correct component ordering for an AFBC
 2-plane YUV 420 buffer. The linear layout contains meaningless padding
 bits, which will not be encoded in an AFBC stream.

YUV 420 8-bit, 1-plane
----------------------
 There is no currently defined single-planar YUV 420, 8-bit format
 in drm_fourcc.h. There's differing opinions on whether using the
 existing fourcc-implied n_planes where possible is a good idea or
 not when using modifiers.

 For me, it's much more "obvious" to use NV12 for 2-plane AFBC and
 YUV420 for 3-plane AFBC. This keeps the aforementioned separation
 between the AFBC codec settings (in the modifier) and the pixel data
 format (in the fourcc). With different vendors using AFBC, this helps
 to ensure that there is no confusion in interoperation. It also
 ensures that the AFBC modifiers describe AFBC itself (which is a
 licensable component), and not implementation details which are not
 defined by AFBC.

 The proposed[1] X0L0 format which Mali-DP supports with Linear layout
 is unsuitable, as it contains a 4th 'X' component, and our AFBC
 decoder expects only 3 components.

 To that end, we propose a new YUV 420 8-bit format. There is no
 "obvious" linear encoding for a 3-component 8:8:8, 420, packed format,
 and so DRM_FORMAT_YUV420_8BIT defines a component order, but not a
 bit encoding. I'm happy to hear different naming suggestions.

YUV 420 8-bit, 2-, 3-plane
--------------------------
 These already exist, we can use NV12 and YUV420.

YUV 420 10-bit, 1-plane
-----------------------
 As above, no current definition exists, and X0L2 encodes a 4th 'X'
 channel.

 Analogous to DRM_FORMAT_YUV420_8BIT, we define DRM_FORMAT_YUV420_10BIT.

[1] https://lists.freedesktop.org/archives/dri-devel/2018-July/184598.html
[2] https://docs.microsoft.com/en-us/windows/desktop/medfound/10-bit-and-16-bit-yuv-video-formats

Changes since RFC v1:
 - Fix confusing subsampling vs bit-depth X:X:X notation in
   descriptions (danvet)
 - Rename DRM_FORMAT_AVYU1101010 to DRM_FORMAT_Y410 (Lisa Wu)
 - Add drm_format_info structures for the new formats, using the
   new 'bpp' field for those with non-integer bytes-per-pixel
 - Rebase, including Juha-Pekka Heikkila's format definitions

Changes since RFC v2:
- Rebase on top of latest changes in drm-misc-next
- Change the description of DRM_FORMAT_P210 in __drm_format_info and
drm_fourcc.h so as to make it consistent with other DRM_FORMAT_PXXX
formats.

Changes since v3:
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: default avatarBrian Starkey <brian.starkey@arm.com>
Signed-off-by: default avatarAyan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Acked-by: default avatarAlyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291759/?series=57895&rev=1
      7ba0fee2
  7. 11 Mar, 2019 6 commits
  9. 08 Mar, 2019 5 commits
  11. 07 Mar, 2019 6 commits
  13. 06 Mar, 2019 4 commits
  15. 05 Mar, 2019 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7