- 20 Oct, 2004 40 commits
-
-
William Lee Irwin III authored
This patch introduces remap_pfn_range(), destined to replace remap_page_range(), to which all callers of remap_page_range() are converted in the sequel. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Neil Brown authored
for OPEN with O_TRUNC, if the truncate fails, the open fails. for nfs4_open_upgrade, this means undo the get_write_access. for new OPENs, this means release the newly created stateid. Signed-off-by:
Andy Adamson <andros@citi.umich.edu> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Neil Brown authored
Thanks to Al Viro for noticing that putrootfh could return either a linux or an nfs error. Signed-off-by:
-
Neil Brown authored
Comments, dprintk cleanup Signed-off-by:
-
Neil Brown authored
Move most of the code in the new_open case of nfsd4_process_open2 to nfs4_new_open. Signed-off-by:
Andy Adamson <andros@umich.edu> Signed-off-by:
-
Neil Brown authored
Move most of the code for the open_upgrade case into a separate nfs4_upgrade_open. Signed-off-by:
-
Neil Brown authored
Reorganize "if" in nfsd4_process_open2 to make test clearer; there was no real reason to test for the negative here. Signed-off-by:
-
Neil Brown authored
Move seqid decrement on reclaim to separate function Signed-off-by:
-
Neil Brown authored
We should set the OPEN_RESULT_LOCKTYPE_POSIX flag in the return to open, to indicate that we support locking. Signed-off-by:
-
Neil Brown authored
nfsd4_process_open2 has become a bit long and contorted. The following patches break nfsd4_process_open2 into smaller functions and add comments to describe logic flow, in preparation for delegation state. We begin by pulling out the code that searches for conflicting open owners into a separate function. Signed-off-by:
-
Neil Brown authored
When we upgrade an open, we keep the same stateid and bump only the seqid. Signed-off-by:
-
Neil Brown authored
We take a reference on the stateowner, and copy the clientid, instead of just hoping no one destroys the stateowner before we reference it in nfsd4_encode_lock_denied. Signed-off-by:
-
Neil Brown authored
With the addition of a reference count, we no longer need the code that conditionally extended the nfs4 state lock over the xdr encode stage. Signed-off-by:
-
Neil Brown authored
Take a reference to preserve the stateowner through the xdr replay code, and simplify nfsd4_proc_compound a little. Signed-off-by:
-
Neil Brown authored
Reference-counting the nfsd4 stateowner structs will let us fix a race and simplify some of the xdr code a bit, and may also help us make the nfsd4 locking a little more fine-grained in the future. Signed-off-by:
-
Neil Brown authored
Make sure getxattr inode op is non-NULL before calling it. Also, security hook should probably be called before calling the getxattr op the first time. Signed-off-by:
-
Neil Brown authored
The ->getxattr op doesn't take the i_sem (see Documentation/filesystems/Locking) Signed-off-by:
-
Neil Brown authored
Separate out the little bit of logic in fh_verify that checks the i_mode into a separate function. This is nicely encapsulated, fh_verify() is overly long anyway, and this change helps make a subsequent nfs4 named attribute change clearer. Signed-off-by:
-
Neil Brown authored
Bug Fix: Non NFSD conflicting byte-range locks were causing an Oops. Encode a zero length owner and zero clientid for non NFSD conflicting locks in the lock_denied response. Signed-off-by:
-
Andrew Morton authored
Kconfig barfs if it doesn't have leading spaces in the help. Signed-off-by:
-
Martin Schlemmer authored
Attached is a patch that adds CONFIG_INITRAMFS_SOURCE, enabling you to either specify a file as cpio_list, or a directory to generate a list from. It depreciate the INITRAMFS_LIST environment variable introduced not long ago. There are some issues (suggestions/patches welcome) that I am not sure about: 1) I put the menu entry under block devices, but I am not sure if this is the correct location? 2) There might be a better (or more correct) way to do this with kbuild? 3) Variable names and especially help text needs some love. 4) I am not sure if I am duplicating work in progress? Signed-off-by:
-
Thayne Harbaugh authored
This patch makes gen_init_cpio generate the initramfs_data.cpio from a file which contains a list of entries: file, dir, nod. I swapped the order of filename/location for the file arguments so that it would be more uniform with the dir and node tyes. Signed-off-by:
-
Andrew Morton authored
Fix up various things which Rusty's patch broke or missed. Signed-off-by:
-
Michael Hunold authored
- [V4L] mxb, dpc7146, hexium_orion, hexium_gemini: follow latest changes in saa7146 driver Signed-off-by:
Michael Hunold <hunold@linuxtv.org> Signed-off-by:
-
Michael Hunold authored
- [DVB] all: replace dvb_unregister_frontend_new() with dvb_unregister_frontend() - [DVB] sp887x: fix firmware download, patch by Jose Alberto Reguero - [DVB] tda1004x: add firmware loading via firmware_class() - [DVB] dvb_frontend: without hierachical coding, code_rate_LP is irrelevant, so we tolerate the otherwise invalid FEC_NONE setting - [DVB] ves1x93: fixed dropouts on older DVB cards, fix tuning issues (Andreas Share / Gregoire Favre), Signed-off-by:
-
Michael Hunold authored
- [DVB] av7110: convert MODULE_PARM() to module_param(), replace home-brewn waiting stuff in osd code with wait_event_interruptible_timeout() - [DVB] av7110: put a semaphore around osd calls to make sure they're properly serialized, timeout variable in arm_thread() must be int, not unsigned long - [DVB] av7110: add additional OSD window types (patch by Jeremy Jones), new ioctl OSD_GET_CAPABILITY/OSD_CAP_MEMSIZE; returns size of OSD memory - [DVB] av7110: put audio/video initialization into separate function init_av7110_av(); call this function after system initialization and after arm crash to restore the previous state; thanks to Soeren Sonnenburg <bugreports@nn7.de> for this patch. - [DVB] av7110, budget, ttusb-budget: remove dvb i2c remains, support kernel i2c - [DVB] av7110, budget: use msleep() instead of my_wait(), thanks to Kernel Janitors/Nishanth Aravamudan <nacc@us.ibm.com> - [DVB] av7110, budget: fix videodev has no release callback - [DVB] av7110: more sparse annotiations - [DVB] budget: add support for TerraTec Cinergy 1200 DVB-S - [DVB] budget: fix race condition in irq handler - [DVB] skystar2, av7110, ttusb-budget, budget: make i2c client_(un)register() functions static Signed-off-by:
-
Michael Hunold authored
- [DVB] new driver for mobile USB Budget DVB-T devices, thanks to Patrick Boettcher Signed-off-by:
-
Michael Hunold authored
- [DVB] add new driver for mobile DVB-T demodulator DiBcom 3000-MB - [DVB] add new drivers to Makefile Signed-off-by:
-
Michael Hunold authored
- [DVB] add new driver for Zarlink DVB-T MT352 frontend - [DVB] add new driver for Conexant 22702 DVB OFDM frontend Signed-off-by:
-
Michael Hunold authored
- [DVB] nxt6000, sp887x: convert from dvb-i2c to kernel-i2c, MODULE_PARM() to module_param(), dvb_delay() to mdelay() - [DVB] sp887x: move from home-brewn firmware loading to firmware_class Signed-off-by:
-
Michael Hunold authored
- [DVB] dvb_dummy_fe, grundig_29504-401, grundig_29504-491, mt312: convert from dvb-i2c to kernel-i2c, MODULE_PARM() to module_param(), dvb_delay() to mdelay() - [DVB] update frontend Kconfig Signed-off-by:
-
Michael Hunold authored
- [DVB] alps_tdlb7, alps_tdmb7, at76c651, cx24110, dst: convert from dvb-i2c to kernel-i2c, MODULE_PARM() to module_param(), dvb_delay() to mdelay() - [DVB] alps_tdlb7: move from home-brewn firmware loading to firmware_class - [DVB] dst: use sysfs attributes for type and flags for per-card parameters Signed-off-by:
-
Michael Hunold authored
- [DVB] stv0299, tda1004x, ves1820, ves1x93: convert from dvb-i2c to kernel-i2c, MODULE_PARM() to module_param(), dvb_delay() to mdelay() - [DVB] tda1004x: move from home-brewn firmware loading to firmware_class - [DVB] stv0299: support Cinergy1200, patch by Uli Luckas Signed-off-by:
-
Michael Hunold authored
- [DVB] remove non-linux compatibility stuff from dvb_functions. rest in peace. - [DVB] remove home-brewn dvb-i2c stuff. rest in peace. - [DVB] convert MODULE_PARM() to module_param() - [DVB] convert dvb_delay() to mdelay() - [DVB] convert C++ comments to C comments - [DVB] dvb_ca_en50221: fix for matrix CAMs from Sjoerd Simons, use c99 initializers, Fix for aston CAM read timeout problems, Moved CAM CTRL IF reset to a better place, better debugging with multiple cards (Sjoerd Simons) - [DVB] dvb-frontend: patch by Wolfgang Fritz: suppress spurious events during tuning, Do not allow write (and related) ioctls when frontend is opened RDONLY, Properly lock the frontend module on open/close, patch by Christopher Pascoe: remove bogus up(fe->sem) on fe thread exit, patch by Christopher Pascoe: remove bogus up(fe->sem) on fe thread exit - [DVB] dvb-demux: using spin_lock instead of spin_lock_irq caused a race condition between irq/tasklet and user space task - [DVB] dvb-core: add sysfs/udev support using "class_simple", prevent Oops when PES filter is set with invalid pes_type, protect feed_list with spin_locks Signed-off-by:
-
Michael Hunold authored
- [DVB] convert drivers from dvb-i2c to kernel-i2c - [DVB] convert MODULE_PARM() to module_param() - [DVB] convert dvb_delay() to mdelay() - [DVB] dvb-bt8xx: convert home-brewn bttv i2c access to a real bttv sub-driver Signed-off-by:
-
Michael Hunold authored
- [DVB] add udev.txt which describes how to use dvb and udev/sysfs - [DVB] add Visionplus VisionDTV USB-Ter DVB-T adapter documentation - [DVB] update TT USB DEC documentation - [DVB] update various Kconfig entries - [DVB] remove obsolete firmware documentation Signed-off-by:
-
Michael Hunold authored
- [DVB] fix videodev has no release callback - [DVB] use PAGE_SIZE for pagetables, not home-brewn SAA7146_PGTABLE_SIZE - [DVB] use cpu_to_le32() at various places for endianess independency - [DVB] turn some error checks into BUG()s - [DVB] make saa7146_i2c_adapter_prepare() support an adapter class - [DVB] add support for V4L2_PIX_FMT_RGB32 pixelformat - [DVB] replace generic saa7146 i2c name by card specific name, suggested by Uli Luckas <luckas@musoft.de> Signed-off-by:
-
Gerd Knorr authored
This is a minor cleanup for the msp3400.c module: use the new msleep() function for delays. Signed-off-by:
-
Gerd Knorr authored
The problem is that dvb is way to much work-in-progress right now, it's almost impossible to build something which works on both mainline kernel + latest dvb cvs. Hope at least the interfaces are settled soon, for now I gave up on getting it work in mainline in short-term. The patch below compiles the DVB card configuration code only when VIDEO_CX88_DVB is enabled (which is commented right now in Kconfig due to being broken). Signed-off-by:
-
Gerd Knorr authored
This is a major update of the cx88 driver. Main new feature is support for the MPEG PCI function of the cx2388x chips. The changes in detail: * A bunch of code restructions, to allow multiple modules (one per PCI function) work on top of the core module. * Add a new module with common code for the mpeg PCI function. * Add a new module to support mpeg encoder cards (connexant "blackbird" reference design). That one is not much tested yet and may have bugs. They can be easily workarounded by not loading the module through, it isn't needed to capture uncompressed video. * Add a new module to support DVB cards. That one is better tested than the blackbird one, but it needs additional cutting-edge stuff from the dvb project, thats why it is disabled in Kconfig for now. * Several cleanups along the way: use kthread, use msleep(), drop some 2.4.x compatibility code, move insmod options to 2.6 style, ... * adapt code to the video-buf changes. * suspend fixes. * as usual some new tv cards. Signed-off-by:Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
