- 09 Feb, 2019 21 commits
-
-
Heiner Kallweit authored
The link status register latches link-down events. Therefore, if link is reported as being up, there's no need for a second read. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; size = sizeof(struct foo) + count * sizeof(void *); instance = alloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = alloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable alloc_size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable fsz is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; size = sizeof(struct foo) + count * sizeof(void *); instance = alloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = alloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = alloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable alloc_size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = alloc(sizeof(struct foo) + count * sizeof(void *)); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = alloc(struct_size(instance, entry, count)); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = alloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = alloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = alloc(sizeof(struct foo) + count * sizeof(struct boo)); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = alloc(struct_size(instance, entry, count)); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = alloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); instance = alloc(size, GFP_KERNEL) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = alloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed*: SmartAN query support SmartAN feature detects the peer/cable capabilities and establishes the link in the best possible configuration. The patch series adds support for querying the capability. Please consider applying it net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
The patch adds driver support to query SmartAN capability via ethtool. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
The patch adds driver interface to read the SmartAN capability from management firmware. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Add support for CFP statistics The Broadcom SF2 switch has a Compact Field Processor (CFP) which not only can perform matching + action, but also counts the number of times a rule has been hit. This is invaluable while debugging when/if rules are not matched. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
When the source and destination port of a CFP rule match, we must set the loopback bit enable to allow that, otherwise the frame is discarded. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Return CFP policer statistics (Green, Yellow or Red) as part of the standard ethtool statistics. This helps debug when CFP rules may not be hit (0 counter). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In preparation for adding CFP statistics, we will need to overlay the standard B53 statistics, so create specific bcm_sf2_sw_* functions to call into their b53_common.c counterpart. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
We no longer need a dedicated statistics mutex since we leverage b53_common for statistics now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
The link status value latches link-down events. To get the current status we read the register twice in genphy_update_link(). There's a potential risk that we miss a link-down event in polling mode. This may cause issues if the user e.g. connects his machine to a different network. On the other hand reading the latched value may cause issues in interrupt mode. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up and triggers an interrupt. Interrupt handler reads link status, means it reads the latched "link is down" info. But there won't be another interrupt as long as link stays up, therefore phylib will never recognize that link is up. Deal with both scenarios by reading the register twice in interrupt mode only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Feb, 2019 19 commits
-
-
Nicolas Ferre authored
Add a new compatibility string for this product. It's using at91sam9260-macb layout but has a newer hardware revision: it's safer to use its own string. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Ferre authored
Add the compatibility sting documentation for sam9x60 10/100 interface. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Ferre authored
This removes a line left while adding the correct compatibility string for sama5d3 10/100 interface. Now use the "atmel,sama5d3-macb" string. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Implement periodic ERP rehash Currently, an ERP set is created for each region according to rules inserted and order of their insertion. However that might lead to suboptimal ERP sets and possible unnecessary spillage into C-TCAM. This patchset aims to fix this problem and introduces periodical checking of used ERP sets and in case a better ERP set is possible for the given set of rules, it rehashes the region to use the better ERP set. Patch 1 prepares devlink params infra in order to fix the init/fini sequences. Patch 2 implements hints infra in objagg library. Patch 3 fixes a typo Patch 4 adds number of root objects directly into objagg stats. Patches 5-7 do split of multiple structs in Spectrum TCAM code. Patch 8 introduces initial implementation of ERP rehash logic, according to objagg hints. Patch 9 adds hints priv passing trought the layers. Patch 10 adds multi field into PAGT reg. (new patch) Patch 11 implements actual region rules migration in TCAM code. Patch 12 adds a devlink param so user is able to control rehash interval. Patch 13 adds couple of tracepoints in order to track rehash procedures. Patch 14 adds a simple selftest to test region rehash. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Track the basic codepaths of delta rehash handling, using mlxsw tracepoints. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
As vregion rehash is happening in delayed work, add some visibility to the process using a few tracepoints. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Expose new driver-specific "acl_region_rehash_interval" devlink param which would allow user to alter default ACL region rehash interval. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
If the hints are returned, the migration should be started. For that to happen, there is a need to create a second physical region in TCAM with new ERP set by passing the hints and then move chunk by chunk, entry by entry. During the transition, two lookups will occur. One in old region and another in new region. The highest priority rule will be chosen. In an unlikely case that the migration will fail and also rollback to original region will fail the vregion will become in bad state. Everything will work, only no future rehash will be possible. In a follow-up work, this can be resolved by trying to resume the rollback in delayed work and repair the vregion. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
For Spectrum-2 this allows parallel lookups in multiple regions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The hints priv comes from ERP code and it is possible to obtain it from TCAM code. Add arg to appropriate functions so the hints priv could be passed back down to ERP code. Pass NULL now as the follow-up patches would pass an actual hints priv pointer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Introduce an initial implementation of rehash logic in ERP code. Currently, the rehash is considered as needed only in case number of roots in the hints is smaller than the number of roots actually in use. In that case return hints pointer and let it be obtained through the callpath through the Spectrum-2 TCAM op. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Do the split of entry struct so the new entry struct is related to the actual HW entry, whereas ventry struct is a SW abstration of that. This split prepares possibility for ventry to hold 2 HW entries which is needed for region ERP rehash flow. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Do the split of chunk struct so the new chunk struct is related to the actual HW chunk (differs between Spectrum and Spectrum-2), whereas vchunk struct is a SW abstraction of that. This split prepares possibility for vchunk to hold 2 HW chunks which is needed for region ERP rehash flow. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Do the split of region struct so the new region struct is related to the actual HW region, whereas vregion struct is a SW abstration of that. This split prepares possibility for vregion to hold 2 HW regions which is needed for region ERP rehash flow. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Count number of roots and add it to stats. It is handy for the library user to have this stats available as it can act upon it without counting roots itself. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Implement simple greedy algo to find more optimized root-delta tree for a given objagg instance. This "hints" can be used by a driver to: 1) check if the hints are better (driver's choice) than the original objagg tree. Driver does comparison of objagg stats and hints stats. 2) use the hints to create a new objagg instance which will construct the root-delta tree according to the passed hints. Currently, only a simple greedy algorithm is implemented. Basically it finds the roots according to the maximal possible user count including deltas. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Currently, user can do dump or get of param values right after the devlink params are registered. However the driver may not be initialized which is an issue. The same problem happens during notification upon param registration. Allow driver to publish devlink params whenever it is ready to handle get() ops. Note that this cannot be resolved by init reordering, as the "driverinit" params have to be available before the driver is initialized (it needs the param values there). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
-