- 28 Jan, 2008 40 commits
-
-
Jan Engelhardt authored
Merge ipt_tos into xt_dscp. Merge ipt_tos (tos v0 match) into xt_dscp. They both match on the same field in the IPv4 header, so it seems reasonable to keep them in one piece. This is part one of the implicit 4-patch series to move tos to xtables and extend it by IPv6. Signed-off-by:
Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jan Engelhardt authored
Constify include/net/dsfield.h Signed-off-by:
-
Jan Engelhardt authored
Unify netfilter match kconfig descriptions Consistently use lowercase for matches in kconfig one-line descriptions and name the match module. Signed-off-by:
-
Laszlo Attila Toth authored
Addrtype match has a new revision (1), which lets address type checking limited to the interface the current packet belongs to. Either incoming or outgoing interface can be used depending on the current hook. In the FORWARD hook two maches should be used if both interfaces have to be checked. The new structure is ipt_addrtype_info_v1. Revision 0 lets older userspace programs use the match as earlier. ipt_addrtype_info is used. Signed-off-by:
Laszlo Attila Toth <panther@balabit.hu> Signed-off-by:
-
Laszlo Attila Toth authored
Address type search can be limited to an interface by inet_dev_addr_type function. Signed-off-by:
-
Jan Engelhardt authored
xt_owner merges ipt_owner and ip6t_owner, and adds a flag to match on socket (non-)existence. Signed-off-by:
-
Patrick McHardy authored
We're not multiplying the size with the number of CPUs anymore, so the check is obsolete. Signed-off-by:
-
Eric Dumazet authored
Instead of using a big array of NR_CPUS entries, we can compute the size needed at runtime, using nr_cpu_ids This should save some ram (especially on David's machines where NR_CPUS=4096 : 32 KB can be saved per table, and 64KB for dynamically allocated ones (because of slab/slub alignements) ) In particular, the 'bootstrap' tables are not any more static (in data section) but on stack as their size is now very small. This also should reduce the size used on stack in compat functions (get_info() declares an automatic variable, that could be bigger than kernel stack size for big NR_CPUS) Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Jan Engelhardt authored
Give all Netfilter modules consistent and unique symbol names. Signed-off-by:
-
Li Zefan authored
Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
-
Sven Schnelle authored
Signed-off-by:
Sven Schnelle <svens@bitebene.org> Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
-
Denis V. Lunev authored
This patch speedups compilation when net_namespace.h is changed. Signed-off-by:
Denis V. Lunev <den@openvz.org> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Patrick McHardy authored
Fix large number of checkpatch errors. Signed-off-by:
-
Herbert Xu authored
When merging the input paths of IPsec I accidentally left a hard-coded AF_INET for the state lookup call. This broke IPv6 obviously. This patch fixes by getting the input callers to specify the family through skb->cb. Credit goes to Kazunori Miyazawa for diagnosing this and providing an initial patch. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Wang Chen authored
System calls should be USER. So change the BH to USER for UDP*_INC_STATS_BH(). Signed-off-by:
Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by:
-
Wang Chen authored
Since we have macro IS_UDPLITE, we can use it. Signed-off-by:
-
Wang Chen authored
Thanks dave, herbert, gerrit, andi and other people for your discussion about this problem. UdpInDatagrams can be confusing because it counts packets that might be dropped later. Move UdpInDatagrams into recvmsg() as allowed by the RFC. Signed-off-by:
-
Ilpo Järvinen authored
Pointing to the next skb is necessary to avoid referencing already SACKed skbs which will soon be on a separate list. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
Lines won't be that long and it's compiler's job to optimize them. Signed-off-by:
-
Ilpo Järvinen authored
They better be valid when call to write_queue functions is made once things that follow are going in. Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
Bogus seqno compares just mislead, the code is identical for both sides of the seqno compare (and was even executed just once because of return in between). Signed-off-by:
-
Ilpo Järvinen authored
To get there, highest_sack must have advanced. When it advances, a new skb is SACKed, which already sets that FLAG. Besides, the original purpose of it has puzzled me, never understood why LOST bit setting of retransmitted skb is marked with FLAG_DATA_SACKED. Signed-off-by:
-
Ilpo Järvinen authored
Usually those skbs will have L set, not counting them as lost retransmissions is misleading. Signed-off-by:
-
Pavel Emelyanov authored
This looks very much like the patch for ipv4's devinet. This is also intended to help us with the net namespaces and saves the ipv6.ko size by ~320 bytes. The difference from the first version is just the patch offsets, that changed due to changes in the patch #2. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Pavel Emelyanov authored
Currently this call is (ab)used similar to devinet one - it registers sysctls for devices and for the "default" confs, while the "all" sysctls are registered separately. But unlike its devinet brother, the passed inet6_device is needed. The fix is to make a __addrconf_sysctl_register(), which registers sysctls for all "devices" we need, including "default" and "all" :) The original addrconf_sysctl_register() calls the introduced function, passing the inet6_device, device name and ifindex (to be used as procname and ctl_name) into it. Thanks to Herbert again for pointing out, that we can shrink the argument list to 1 :) Signed-off-by:
-
Pavel Emelyanov authored
This looks very much like the patch for neighbors. The path is also located on the stack and is prepared inside the function. This time, the call to the registering function is guarded with the RTNL lock, but I decided to keep it on the stack not to litter the devinet.c file with unneeded names and to make it look similar to the neighbors code. This is also intended to help us with the net namespaces and saves the vmlinux size as well - this time by more than 670 bytes. The difference from the first version is just the patch offsets, that changed due to changes in the patch #2. Signed-off-by:
-
Pavel Emelyanov authored
Currently this call is used to register sysctls for devices and for the "default" confs. The "all" sysctls are registered separately. Besides, the inet_device is passed to this function, but it is not needed there at all - just the device name and ifindex are required. Thanks to Herbert, who noticed, that this call doesn't even require the devconf pointer (the last argument) - all we need we can take from the in_device itself. The fix is to make a __devinet_sysctl_register(), which registers sysctls for all "devices" we need, including "default" and "all" :) The original devinet_sysctl_register() works with struct net_device, not the inet_device, and calls the introduced function, passing the device name and ifindex (to be used as procname and ctl_name) into it. Signed-off-by:
-
John W. Linville authored
Schedule softmac for for removal in the 2.6.26 development window. Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
John W. Linville authored
Schedule bcm43xx for for removal in the 2.6.26 development window. Signed-off-by:
-
John W. Linville authored
These bits were dead code before "mac80211: Remove local->scan_flags" (commit 6681dd3fd0e4d36a4547415853e83411baa7b705) and probably should have been removed as part of that commit. Signed-off-by:
-
Ron Rindjunsky authored
This patch moves u8 amsdu_frame in ieee80211_txrx_data to the flags section as IEEE80211_TXRXD_RX_AMSDU Signed-off-by:
Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by:
-
Ron Rindjunsky authored
This patch configures the 802.11n mode of operation internally in ieee80211_conf structure and in the low-level driver as well (through op conf_ht). It does not include AP configuration flows. Signed-off-by:
-
Ron Rindjunsky authored
This patch adds the ability to receive and handle A-MSDU frames. Signed-off-by:
-
Ron Rindjunsky authored
This patch adds the capability to identify and answer an add block ACK request. As this series of patches only adds HT handling with no aggregations, (A-MPDU aggregations acceptance is not obligatory according to 802.11n draft) we are currently sending back a refusal upon this request. Signed-off-by:
-
Ron Rindjunsky authored
This patch presents the ability to parse and compose HT IEs, and to put the IE relevant data inside the mac80211's internal HT structures Signed-off-by:
-
