- 29 Oct, 2018 8 commits
-
-
Gerd Hoffmann authored
Drop pointless resid variable in virtio_gpu_mode_dumb_create(), just use the hw_res_handle field in virtio_gpu_object directly. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-4-kraxel@redhat.com
-
Gerd Hoffmann authored
Drop pointless resid variable in virtio_gpufb_create(), just use the hw_res_handle field in virtio_gpu_object directly. Signed-off-by:
-
Gerd Hoffmann authored
Track whenever the virtio_gpu_object is already created (i.e. host knows about it) in a new variable. Add checks to virtio_gpu_object_attach() to do nothing on objects not created yet. Make virtio_gpu_ttm_bo_destroy() use the new variable too, instead of expecting hw_res_handle indicating the object state. Signed-off-by:
-
Colin Ian King authored
Trivial fix to a spelling mistake of the error access name EACCESS, rename to EACCES Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181026180512.4908-1-colin.king@canonical.com
-
Enric Balletbo i Serra authored
This patch avoids that building the bridge/analogix source code with smatch triggers complaints about inconsistent indenting. It also fixes a typo in DRM_ERROR message, attch is replaced for attach. Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016095336.15656-1-enric.balletbo@collabora.com
-
Maxime Ripard authored
The is_double flag is a boolean currently assigned to the value of the d variable, that is either 1 or 2. It means that this is_double variable is always set to true, even though the initial intent was to have it set to true when d is 2. Fix this. Fixes: 9c568101 ("drm/sun4i: Add HDMI support") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by:
Giulio Benetti <giulio.benetti@micronovasrl.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181021163446.29135-2-maxime.ripard@bootlin.com
-
Maxime Ripard authored
The is_double variable is used to store, and possibly returning to the calling function, whether it needs to double the rate of the parent clock or not. In the case where it does, the variable is affected, but in the case where it doesn't we return some uninitialized value. Fix this. Reported-by:
-
Emil Velikov authored
Earlier commit updated the vgem driver to improve the topology, by passing a platform device as parent to drm_dev_init(). Shortly afterwords we updated the core function to BUG() in order to catch any buggy drivers passing NULL as parent. While I missed the vkms driver (as the patch predates vkms by a few months), the BUG caught the issue within couple of hours. Swap the drm_dev_init <> platform_device_register_simple order, to the driver back to life. Fixes: f08877e7 ("drm: BUG_ON if passing NULL parent to drm_dev_init") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Deepak Sharma <deepak.sharma@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reported-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
-
- 26 Oct, 2018 3 commits
-
-
Clint Taylor authored
HDMI 2.0 monitors may not support SCDC and still be able to accept VICs above 63. Use multiple EDID capbilities to determine if the SINK is actually an HDMI 2.0 device. The QD980B HDMI 2.0 Analyzer generates unique EDIDs during CTS tests that don't contain a HDMI Forum VSDB if the block is not used during the test. The current HDMI AVI infoframe code only uses the SCDC supported information in the HDMI Forum VSDB to determine if the sink is HDMI 2.0. This patch adds a check for YCbCr420 present in the EDID supported formats as well as the existing SCDC supported check. HDMI 2.0 CTS HF1-51 test fails on the QD980B. V2: Make check for display_info->color formats == YCbCR420 and SCDC Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107894 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540415073-5102-1-git-send-email-clinton.a.taylor@intel.com
-
Chris Wilson authored
We need to serialise the addition of a new fence into the shared list such that the fence is visible before we claim it is there. Otherwise a concurrent reader of the shared fence list will see an uninitialised fence slot before it is set. <4> [109.613162] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [109.613177] CPU: 1 PID: 1357 Comm: gem_busy Tainted: G U 4.19.0-rc8-CI-CI_DRM_5035+ #1 <4> [109.613189] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 <4> [109.613252] RIP: 0010:i915_gem_busy_ioctl+0x146/0x380 [i915] <4> [109.613261] Code: 0b 43 04 49 83 c6 08 4d 39 e6 89 43 04 74 6d 4d 8b 3e e8 5d 54 f4 e0 85 c0 74 0d 80 3d 08 71 1d 00 00 0f 84 bb 00 00 00 31 c0 <49> 81 7f 08 20 3a 2c a0 75 cc 41 8b 97 50 02 00 00 49 8b 8f a8 00 <4> [109.613283] RSP: 0018:ffffc9000044bcf8 EFLAGS: 00010246 <4> [109.613292] RAX: 0000000000000000 RBX: ffffc9000044bdc0 RCX: 0000000000000001 <4> [109.613302] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffffff822474a0 <4> [109.613311] RBP: ffffc9000044bd28 R08: ffff88021e158680 R09: 0000000000000001 <4> [109.613321] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88021e1641b8 <4> [109.613331] R13: 0000000000000003 R14: ffff88021e1641b0 R15: 6b6b6b6b6b6b6b6b <4> [109.613341] FS: 00007f9c9fc84980(0000) GS:ffff880227a40000(0000) knlGS:0000000000000000 <4> [109.613352] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [109.613360] CR2: 00007f9c9fcb8000 CR3: 00000002247d4005 CR4: 00000000000606e0 Fixes: 27836b64 ("dma-buf: remove shared fence staging in reservation object") Testcase: igt/gem_busy/close-race Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026080302.11507-1-chris@chris-wilson.co.uk
-
Chunming Zhou authored
drivers/gpu/drm/drm_syncobj.c:202:4-14: ERROR: function drm_syncobj_find_signal_pt_for_point called on line 390 inside lock on line 389 but uses GFP_KERNEL Find functions that refer to GFP_KERNEL but are called with locks held. Generated by: scripts/coccinelle/locks/call_kern.cocci v2: syncobj->timeline still needs protect. v3: use a global signaled fence instead of re-allocation. v4: Don't need moving lock. Don't expose func. v5: rename func and directly return. Tested by: syncobj_wait and ./deqp-vk -n dEQP-VK.*semaphore* with lock debug kernel options enabled. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: Christian König <easy2remember.chk@googlemail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> CC: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 25 Oct, 2018 10 commits
-
-
Abhinav Kumar authored
Add the device tree bindings for Truly NT35597 panel driver. This panel driver supports both single DSI and dual DSI. However, this patch series supports only dual DSI. Changes in v10: - Remove active high in the documentation for mode gpio - Fix commmit text detail about the board and also fix a typo Reviewed-by:Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
-
Abhinav Kumar authored
Add support for Truly NT35597 panel driver used in MSM reference platforms. This panel driver supports both single DSI and dual DSI modes. However, this patch series adds support only for dual DSI mode. Changes in v10: - None Reviewed-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. drm_fbdev_generic_setup() handles mode_config.num_connector being zero. In that case it retries fbdev setup on the next .output_poll_changed. Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Yannick Fertré <yannick.fertre@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-15-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-6-noralf@tronnes.org
-
Emil Velikov authored
A while back we removed it, yet that lead to regressions. At some later point, I've attempted to remove it again without fully grasping the unique (pun intended) situation that virtio is in. Add a bulky comment to document why the call should stay as-is, for the next person who's around. As a Tl;Dr: virtio sits on top of struct virtio_device, which confuses dev_is_pci(), wrong info gets sent to userspace and X doesn't start. Driver needs to explicitly call drm_dev_set_unique() to keep it working. v2: Fix handful of typos (Laszlo) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by:
Laszlo Ersek <lersek@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181024144252.16518-1-emil.l.velikov@gmail.com
-
Emil Velikov authored
Previous commit removed the only reason why we were allowing NULL as a parent device. With that resolved, we can enforce nobody else does that mistake. With that we can drop the ugly drm_dev_set_unique workaround. v2: rebase, silence checkpatch "== NULL" warning Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Deepak Sharma <deepak.sharma@amd.com> Signed-off-by:
-
Deepak Sharma authored
Modify vgem_init to take platform dev as parent in drm_dev_init. This will make drm device available at "/sys/devices/platform/vgem" in x86 chromebook. v2: rebase, address checkpatch typo and line over 80 characters Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Deepak Sharma <deepak.sharma@amd.com> Reviewed-by:
-
Christian König authored
Set shared_max to the number of shared fences right before we release the lock. This way every attempt to add a shared fence without previously reserving a slot will cause an error. Signed-off-by:
Huang Rui <ray.huang@amd.com> Acked-by:
Junwei Zhang <Jerry.Zhang@amd.com> Link: https://patchwork.kernel.org/patch/10626147/
-
Christian König authored
Let's support simultaneous submissions to multiple engines. Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
-
Christian König authored
No need for that any more. Just replace the list when there isn't enough room any more for the additional fence. Signed-off-by:
-
- 24 Oct, 2018 15 commits
-
-
Sean Paul authored
Fixes the following warnings: ../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property' ../drivers/gpu/drm/drm_connector.c:306: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property' ../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property' ../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property' ../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property' Fixes: 6b7e2d5c ("drm: add drm_connector_attach_edid_property()") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lyude Paul authored
There's no reason to track the atomic state three times. Unfortunately, this is currently what we're doing, and even worse is that there is only one actually correct state pointer: the one in mst_state->base.state. mgr->state never seems to be used, along with the one in mst_state->state. This confused me for over 4 hours until I realized there was no magic behind these pointers. So, let's save everyone else from the trouble. Signed-off-by: Lyude Paul <lyude@redhat.com>. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Lyude Paul authored
Because we have drm_dp_atomic_find_vcpi_slots(), which actually takes care to update the atomic state of the MST topology, prints valuable debugging output, and actually takes references to the ports it's checking! This explains some incorrect usage I've been seeing across the tree... Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
-
Sean Paul authored
4.19 is out, Lyude asked for a backmerge, and it's been a while. All very good reasons on their own :-) Signed-off-by: -
Boris Brezillon authored
When vc4_plane_state is duplicated ->is_yuv is left assigned to its previous value, and we never set it back to false when switching to a non-YUV format. Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch of the vc4_plane_setup_clipping_and_scaling() function. Fixes: fc04023f ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com
-
Boris Brezillon authored
X/Y positioning of T-format buffers is quite tricky and the current implementation was failing to position a plane using this format correctly when the CRTC X, Y or both X and Y offsets were negative. It was also failing when the SRC X/Y offsets were != 0. Signed-off-by:
-
Boris Brezillon authored
The offset adjustment depends on the framebuffer modified, so let's just move this operation in the DRM_FORMAT_MOD_LINEAR case inside vc4_plane_mode_set(). This we'll be able to fix offset calculation for DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED and DRM_FORMAT_MOD_BROADCOM_SANDXXX. Signed-off-by:
-
Boris Brezillon authored
drm_atomic_helper_check_plane_state() takes care of checking the scaling capabilities and calculating the clipped X/Y offsets for us. Rely on this function instead of open-coding the logic. Incidentally, it seems to fix a problem we had with negative X/Y positioning of YUV planes. Signed-off-by:
-
Eric Anholt authored
This is needed to support X/Y negative placement of planes using T-format buffers. Signed-off-by:
-
Eric Anholt authored
Y_OFFSET field starts at bit 8 not 7. Signed-off-by:
-
Linus Walleij authored
The Samsung S6D16D0 is a simple comman mode only DSI display that is used on the ST-Ericsson Ux500 reference design TVK1281618 user interface board (UIB). Cc: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Linus Walleij authored
This adds the device tree bindings for the Samsung S6D16D0 panel. This is a command mode only panel using DSI. Cc: devicetree@vger.kernel.org Cc: Andrzej Hajda <a.hajda@samsung.com> Acked-by:
-
Linus Walleij authored
The DSI devices have a maximum operating frequency specified in their data sheet per the MIPI specification, and DSI hosts that can scale their frequency need this information to set their clock dividers right. As current panel drivers often lack this information, specify that setting it to zero will make the DSI host use some reasonable default. Reviewed-by:
-
Daniel Vetter authored
We recently bikeshedded this to a different flavour, but forgot to update the recommendations. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181019084311.23836-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Shuts up warning noise. Reviewed-by:
Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Signed-off-by:
-
- 23 Oct, 2018 4 commits
-
-
Mamta Shukla authored
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR because its better to have inlined function rather than code-opened implementation. Signed-off-by:
Mamta Shukla <mamtashukla555@gmail.com> Reviewed-by:
Sean Paul <sean@poorly.run> Signed-off-by:
-
Souptick Joarder authored
Replace dma_alloc_coherent + memset with dma_zalloc_coherent. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Eugeniy Paltsev authored
UDL doesn't support vblank functionality so we don't need to initialize vblank here (we are able to send page flip completion events even without vblank initialization) Moreover current drm_vblank_init call with num_crtcs > 0 causes sending DRM_EVENT_FLIP_COMPLETE event with zero timestamp every time. This breaks userspace apps (for example weston) which relies on timestamp value. Cc: stable@vger.kernel.org Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Souptick Joarder authored
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). remove suspend_state field from the rcar_du_device structure as it is no more required. With this conversion, also drm_fbdev_cma_set_suspend_unlocked() will left with no consumer. So this function can be removed. Signed-off-by:
-
