set_tag() compiles away when CONFIG_KASAN_SW_TAGS=n, so make
arch_kasan_set_tag() a static inline function to fix warnings below.

  mm/kasan/common.c: In function '__kasan_kmalloc':
  mm/kasan/common.c:475:5: warning: variable 'tag' set but not used [-Wunused-but-set-variable]
    u8 tag;
       ^~~

Link: http://lkml.kernel.org/r/20190307185244.54648-1-cai@lca.pwSigned-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls
generated by ->setattr() ops for the purpose of expanding a file is
incorrect due to older documentation incorrectly describing the way the RPC
'FileLength' parameter is meant to work.

The older documentation says that this is the length the file is meant to
end up at the end of the operation; however, it was never implemented this
way in any of the servers, but rather the file is truncated down to this
before the write operation is effected, and never expanded to it (and,
indeed, it was renamed to 'TruncPos' in 2014).

Fix this by setting the position parameter to the new file length and doing
a zero-lengh write there.

The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file
it then mmaps.  This can be tested by giving the following test program a
filename in an AFS directory:

	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <fcntl.h>
	#include <sys/mman.h>
	int main(int argc, char *argv[])
	{
		char *p;
		int fd;
		if (argc != 2) {
			fprintf(stderr,
				"Format: test-trunc-mmap <file>\n");
			exit(2);
		}
		fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC);
		if (fd < 0) {
			perror(argv[1]);
			exit(1);
		}
		if (ftruncate(fd, 0x140008) == -1) {
			perror("ftruncate");
			exit(1);
		}
		p = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
			 MAP_SHARED, fd, 0);
		if (p == MAP_FAILED) {
			perror("mmap");
			exit(1);
		}
		p[0] = 'a';
		if (munmap(p, 4096) < 0) {
			perror("munmap");
			exit(1);
		}
		if (close(fd) < 0) {
			perror("close");
			exit(1);
		}
		exit(0);
	}

Fixes: 31143d5d ("AFS: implement basic file write support")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update the mount API docs to reflect recent changes to the code.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull s390 fixes from Martin Schwidefsky:
 "Improvements and bug fixes for 5.1-rc2:

   - Fix early free of the channel program in vfio

   - On AP device removal make sure that all messages are flushed with
     the driver still attached that queued the message

   - Limit brk randomization to 32MB to reduce the chance that the heap
     of ld.so is placed after the main stack

   - Add a rolling average for the steal time of a CPU, this will be
     needed for KVM to decide when to do busy waiting

   - Fix a warning in the CPU-MF code

   - Add a notification handler for AP configuration change to react
     faster to new AP devices"

* tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cpumf: Fix warning from check_processor_id
  zcrypt: handle AP Info notification from CHSC SEI command
  vfio: ccw: only free cp on final interrupt
  s390/vtime: steal time exponential moving average
  s390/zcrypt: revisit ap device remove procedure
  s390: limit brk randomization to 32MB

Pull ARM SoC fixes from Arnd Bergmann:
 "A couple of minor fixes only for now

   - fix for incorrect DMA channels on Renesas R-Car

   - Broadcom bcm2835 error handling fixes

   - Kconfig dependency fixes for bcm2835 and davinci

   - CPU idle wakeup fix for i.MX6

   - MMC regression on Tegra186

   - fix incorrect phy settings on one imx board"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186
  ARM: dts: nomadik: Fix polarity of SPI CS
  ARM: davinci: fix build failure with allnoconfig
  ARM: imx_v4_v5_defconfig: enable PWM driver
  ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
  ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
  ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
  ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
  ARM: dts: pfla02: increase phy reset duration
  ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
  ARM: imx51: fix a leaked reference by adding missing of_node_put
  ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
  arm64: bcm2835: Add missing dependency on MFD_CORE.
  ARM: dts: bcm283x: Fix hdmi hpd gpio pull
  soc: bcm: bcm2835-pm: Fix error paths of initialization.
  soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
  arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
  arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels

Function __hw_perf_event_init() used a CPU variable without
ensuring CPU preemption has been disabled. This caused the
following warning in the kernel log:

  [ 7.277085] BUG: using smp_processor_id() in preemptible
                 [00000000] code: cf-csdiag/1892
  [ 7.277111] caller is cf_diag_event_init+0x13a/0x338
  [ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted
                 5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1
  [ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR)
  [ 7.277139] Call Trace:
  [ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0)
  [ 7.277161]  [<0000000000b7a71a>] dump_stack+0x92/0xd0
  [ 7.277174]  [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100
  [ 7.277183]  [<00000000001228aa>] cf_diag_event_init+0x13a/0x338
  [ 7.277195]  [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0
  [ 7.277204]  [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0
  [ 7.277214]  [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50
  [ 7.277224]  [<0000000000b9e8f0>] system_call+0xdc/0x2d8
  [ 7.277233] 2 locks held by cf-csdiag/1892:
  [ 7.277241]  #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.},
                  at: __s390x_sys_perf_event_open+0xd2e/0xd50
  [ 7.277257]  #1: 00000000363b11bd (&pmus_srcu){....},
                  at: perf_event_alloc+0x52e/0xce0

The variable is now accessed in proper context. Use
get_cpu_var()/put_cpu_var() pair to disable
preemption during access.
As the hardware authorization settings apply to all CPUs, it
does not matter which CPU is used to check the authorization setting.

Remove the event->count assignment. It is not needed as function
perf_event_alloc() allocates memory for the event with kzalloc() and
thus count is already set to zero.

Fixes: fe5908bc ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull networking fixes from David Miller:
 "Fixes here and there, a couple new device IDs, as usual:

   1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.

   2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.

   3) Fix documentation for some eBPF helpers, from Quentin Monnet.

   4) Some UAPI bpf header sync with tools, also from Quentin Monnet.

   5) Set descriptor ownership bit at the right time for jumbo frames in
      stmmac driver, from Aaro Koskinen.

   6) Set IFF_UP properly in tun driver, from Eric Dumazet.

   7) Fix load/store doubleword instruction generation in powerpc eBPF
      JIT, from Naveen N. Rao.

   8) nla_nest_start() return value checks all over, from Kangjie Lu.

   9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
      merge window. From Marcelo Ricardo Leitner and Xin Long.

  10) Fix memory corruption with large MTUs in stmmac, from Aaro
      Koskinen.

  11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
      Dumazet.

  12) Fix topology subscription cancellation in tipc, from Erik Hugne.

  13) Memory leak in genetlink error path, from Yue Haibing.

  14) Valid control actions properly in packet scheduler, from Davide
      Caratti.

  15) Even if we get EEXIST, we still need to rehash if a shrink was
      delayed. From Herbert Xu.

  16) Fix interrupt mask handling in interrupt handler of r8169, from
      Heiner Kallweit.

  17) Fix leak in ehea driver, from Wen Yang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
  dpaa2-eth: fix race condition with bql frame accounting
  chelsio: use BUG() instead of BUG_ON(1)
  net: devlink: skip info_get op call if it is not defined in dumpit
  net: phy: bcm54xx: Encode link speed and activity into LEDs
  tipc: change to check tipc_own_id to return in tipc_net_stop
  net: usb: aqc111: Extend HWID table by QNAP device
  net: sched: Kconfig: update reference link for PIE
  net: dsa: qca8k: extend slave-bus implementations
  net: dsa: qca8k: remove leftover phy accessors
  dt-bindings: net: dsa: qca8k: support internal mdio-bus
  dt-bindings: net: dsa: qca8k: fix example
  net: phy: don't clear BMCR in genphy_soft_reset
  bpf, libbpf: clarify bump in libbpf version info
  bpf, libbpf: fix version info and add it to shared object
  rxrpc: avoid clang -Wuninitialized warning
  tipc: tipc clang warning
  net: sched: fix cleanup NULL pointer exception in act_mirr
  r8169: fix cable re-plugging issue
  net: ethernet: ti: fix possible object reference leak
  net: ibm: fix possible object reference leak
  ...

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
   - fix mount/umount race in nlmclnt.
   - NFSv4.1 don't free interrupted slot on open

  Bugfixes:
   - Don't let RPC_SOFTCONN tasks time out if the transport is connected
   - Fix a typo in nfs_init_timeout_values()
   - Fix layoutstats handling during read failovers
   - fix uninitialized variable warning"

* tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: fix uninitialized variable warning
  pNFS/flexfiles: Fix layoutstats handling during read failovers
  NFS: Fix a typo in nfs_init_timeout_values()
  SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
  NFSv4.1 don't free interrupted slot on open
  NFS: fix mount/umount race in nlmclnt.
  NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()

Avoid following compiler warning on uninitialized variable

net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’:
net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   return read;
          ^~~~
net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  return ret < 0 ? ret : read;
         ~~~~~~~~~~~~~~^~~~~~
Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

It might happen that Tx conf acknowledges a frame before it was
subscribed in bql, as subscribing was previously done after the enqueue
operation.

This patch moves the netdev_tx_sent_queue call before the actual frame
enqueue, so that this can never happen.

Fixes: 569dac6a ("dpaa2-eth: bql support")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

clang warns about possible bugs in a dead code branch after
BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled:

 drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if'
      condition is false [-Werror,-Wsometimes-uninitialized]
                BUG_ON(1);
                ^~~~~~~~~
 include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
 #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                                   ^~~~~~~~~~~~~~~~~~~
 include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
 #  define unlikely(x)   (__branch_check__(x, 0, __builtin_constant_p(x)))
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here
        return buf_size;
               ^~~~~~~~
 drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true
                BUG_ON(1);
                ^
 include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
 #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                               ^
 drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning
        int buf_size;
                    ^
                     = 0

Use BUG() here to create simpler code that clang understands
correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In dumpit, unlike doit, the check for info_get op being defined
is missing. Add it and avoid null pointer dereference in case driver
does not define this op.

Fixes: f9cf2288 ("devlink: add device information API")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously the green and amber LEDs on this quad PHY were solid, to
indicate an encoding of the link speed (10/100/1000).

This keeps the LEDs always on just as before, but now they flash on
Rx/Tx activity.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When running a syz script, a panic occurred:

[  156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc]
[  156.094315] Call Trace:
[  156.094844]  <IRQ>
[  156.095306]  dump_stack+0x7c/0xc0
[  156.097346]  print_address_description+0x65/0x22e
[  156.100445]  kasan_report.cold.3+0x37/0x7a
[  156.102402]  tipc_disc_timeout+0x9c9/0xb20 [tipc]
[  156.106517]  call_timer_fn+0x19a/0x610
[  156.112749]  run_timer_softirq+0xb51/0x1090

It was caused by the netns freed without deleting the discoverer timer,
while later on the netns would be accessed in the timer handler.

The timer should have been deleted by tipc_net_stop() when cleaning up a
netns. However, tipc has been able to enable a bearer and start d->timer
without the local node_addr set since Commit 52dfae5c ("tipc: obtain
node identity from interface by default"), which caused the timer not to
be deleted in tipc_net_stop() then.

So fix it in tipc_net_stop() by changing to check local node_id instead
of local node_addr, as Jon suggested.

While at it, remove the calling of tipc_nametbl_withdraw() there, since
tipc_nametbl_stop() will take of the nametbl's freeing after.

Fixes: 52dfae5c ("tipc: obtain node identity from interface by default")
Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

New device of QNAP based on aqc111u
Add this ID to blacklist of cdc_ether driver as well
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC 8033 replaces the IETF draft for PIE
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch implements accessors for the QCA8337 MDIO access
through the MDIO_MASTER register, which makes it possible to
access the PHYs on slave-bus through the switch. In cases
where the switch ports are already mapped via external
"phy-phandles", the internal mdio-bus is disabled in order to
prevent a duplicated discovery and enumeration of the same
PHYs. Don't use mixed external and internal mdio-bus
configurations, as this is not supported by the hardware.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This belated patch implements Andrew Lunn's request of
"remove the phy_read() and phy_write() functions."
<https://lore.kernel.org/patchwork/comment/902734/>

While seemingly harmless, this causes the switch's user
port PHYs to get registered twice. This is because the
DSA subsystem will create a slave mdio-bus not knowing
that the qca8k_phy_(read|write) accessors operate on
the external mdio-bus. So the same "bus" gets effectively
duplicated.

Cc: stable@vger.kernel.org
Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the qca8k's binding to document to the
approach for using the internal mdio-bus of the supported
qca8k switches.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the example, the phy at phy@0 is clashing with
the switch0@0 at the same address. Usually, the switches
are accessible through pseudo PHYs which in case of the
qca8k are located at 0x10 - 0x18.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull btrfs fixes from David Sterba:

 - fsync fixes: i_size for truncate vs fsync, dio vs buffered during
   snapshotting, remove complicated but incomplete assertion

 - removed excessive warnigs, misreported device stats updates

 - fix raid56 page mapping for 32bit arch

 - fixes reported by static analyzer

* tag 'for-5.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix assertion failure on fsync with NO_HOLES enabled
  btrfs: Avoid possible qgroup_rsv_size overflow in btrfs_calculate_inode_block_rsv_size
  btrfs: Fix bound checking in qgroup_trace_new_subtree_blocks
  btrfs: raid56: properly unmap parity page in finish_parity_scrub()
  btrfs: don't report readahead errors and don't update statistics
  Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes
  btrfs: remove WARN_ON in log_dir_items
  Btrfs: fix incorrect file size after shrinking truncate and fsync

Pull tracing fixes from Steven Rostedt:
 "Three small fixes:

   - A fix to a double free in the histogram code

   - Uninitialized variable fix

   - Use NULL instead of zero fix and spelling fixes"

* tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix warning using plain integer as NULL & spelling corrections
  tracing: initialize variable in create_dyn_event()
  tracing: Remove unnecessary var_ref destroy in track_data_destroy()

Pull file locking bugfix from Jeff Layton:
 "Just a single fix for a bug that crept into POSIX lock deadlock
  detection in v5.0"

* tag 'locks-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: wake any locks blocked on request before deadlock check

Changed  0 --> NULL to avoid sparse warning
Corrected spelling mistakes reported by checkpatch.pl
Sparse warning below:

sudo make C=2 CF=-D__CHECK_ENDIAN__ M=kernel/trace

CHECK   kernel/trace/ftrace.c
kernel/trace/ftrace.c:3007:24: warning: Using plain integer as NULL pointer
kernel/trace/ftrace.c:4758:37: warning: Using plain integer as NULL pointer

Link: http://lkml.kernel.org/r/20190323183523.GA2244@hari-Inspiron-1545Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fix compile warning in create_dyn_event(): 'ret' may be used uninitialized
in this function [-Wuninitialized].

Link: http://lkml.kernel.org/r/1553237900-8555-1-git-send-email-frowand.list@gmail.com

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 5448d44c ("tracing: Add unified dynamic event framework")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Commit 656fe2ba (tracing: Use hist trigger's var_ref array to
destroy var_refs) centralized the destruction of all the var_refs
in one place so that other code didn't have to do it.

The track_data_destroy() added later ignored that and also destroyed
the track_data var_ref, causing a double-free error flagged by KASAN.

==================================================================
BUG: KASAN: use-after-free in destroy_hist_field+0x30/0x70
Read of size 8 at addr ffff888086df2210 by task bash/1694

CPU: 6 PID: 1694 Comm: bash Not tainted 5.1.0-rc1-test+ #15
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03
07/14/2016
Call Trace:
 dump_stack+0x71/0xa0
 ? destroy_hist_field+0x30/0x70
 print_address_description.cold.3+0x9/0x1fb
 ? destroy_hist_field+0x30/0x70
 ? destroy_hist_field+0x30/0x70
 kasan_report.cold.4+0x1a/0x33
 ? __kasan_slab_free+0x100/0x150
 ? destroy_hist_field+0x30/0x70
 destroy_hist_field+0x30/0x70
 track_data_destroy+0x55/0xe0
 destroy_hist_data+0x1f0/0x350
 hist_unreg_all+0x203/0x220
 event_trigger_open+0xbb/0x130
 do_dentry_open+0x296/0x700
 ? stacktrace_count_trigger+0x30/0x30
 ? generic_permission+0x56/0x200
 ? __x64_sys_fchdir+0xd0/0xd0
 ? inode_permission+0x55/0x200
 ? security_inode_permission+0x18/0x60
 path_openat+0x633/0x22b0
 ? path_lookupat.isra.50+0x420/0x420
 ? __kasan_kmalloc.constprop.12+0xc1/0xd0
 ? kmem_cache_alloc+0xe5/0x260
 ? getname_flags+0x6c/0x2a0
 ? do_sys_open+0x149/0x2b0
 ? do_syscall_64+0x73/0x1b0
 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
 ? _raw_write_lock_bh+0xe0/0xe0
 ? __kernel_text_address+0xe/0x30
 ? unwind_get_return_address+0x2f/0x50
 ? __list_add_valid+0x2d/0x70
 ? deactivate_slab.isra.62+0x1f4/0x5a0
 ? getname_flags+0x6c/0x2a0
 ? set_track+0x76/0x120
 do_filp_open+0x11a/0x1a0
 ? may_open_dev+0x50/0x50
 ? _raw_spin_lock+0x7a/0xd0
 ? _raw_write_lock_bh+0xe0/0xe0
 ? __alloc_fd+0x10f/0x200
 do_sys_open+0x1db/0x2b0
 ? filp_open+0x50/0x50
 do_syscall_64+0x73/0x1b0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fa7b24a4ca2
Code: 25 00 00 41 00 3d 00 00 41 00 74 4c 48 8d 05 85 7a 0d 00 8b 00 85 c0
75 6d 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff
0f 87 a2 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
RSP: 002b:00007fffbafb3af0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 000055d3648ade30 RCX: 00007fa7b24a4ca2
RDX: 0000000000000241 RSI: 000055d364a55240 RDI: 00000000ffffff9c
RBP: 00007fffbafb3bf0 R08: 0000000000000020 R09: 0000000000000002
R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000000001 R15: 000055d364a55240
==================================================================

So remove the track_data_destroy() destroy_hist_field() call for that
var_ref.

Link: http://lkml.kernel.org/r/1deffec420f6a16d11dd8647318d34a66d1989a9.camel@linux.intel.com

Fixes: 466f4528 ("tracing: Generalize hist trigger onmax and save action")
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

So far we effectively clear the BMCR register. Some PHY's can deal
with this (e.g. because they reset BMCR to a default as part of a
soft-reset) whilst on others this causes issues because e.g. the
autoneg bit is cleared. Marvell is an example, see also thread [0].
So let's be a little bit more gentle and leave all bits we're not
interested in as-is. This change is needed for PHY drivers to
properly deal with the original patch.

[0] https://marc.info/?t=155264050700001&r=1&w=2

Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset")
Tested-by: Phil Reid <preid@electromag.com.au>
Tested-by: liweihang <liweihang@hisilicon.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 1aec4211.

Steven Rostedt reports that it causes a hang at bootup and bisected it
to this commit.

The troigger is apparently a module alias for "parport_lowlevel" that
points to "parport_pc", which causes a hang with

    modprobe -q -- parport_lowlevel

blocking forever with a backtrace like this:

    wait_for_completion_killable+0x1c/0x28
    call_usermodehelper_exec+0xa7/0x108
    __request_module+0x351/0x3d8
    get_lowlevel_driver+0x28/0x41 [parport]
    __parport_register_driver+0x39/0x1f4 [parport]
    daisy_drv_init+0x31/0x4f [parport]
    parport_bus_init+0x5d/0x7b [parport]
    parport_default_proc_register+0x26/0x1000 [parport]
    do_one_initcall+0xc2/0x1e0
    do_init_module+0x50/0x1d4
    load_module+0x1c2e/0x21b3
    sys_init_module+0xef/0x117

Supid says:
 "Due to the new device model daisy driver will now try to find the
  parallel ports while trying to register its driver so that it can bind
  with them. Now, since daisy driver is loaded while parport bus is
  initialising the list of parport is still empty and it tries to load
  the lowlevel driver, which has an alias set to parport_pc, now causes
  a deadlock"

But I don't think the daisy driver should be loaded by the parport
initialization in the first place, so let's revert the whole change.

If the daisy driver can just initialize separately on its own (like a
driver should), instead of hooking into the parport init sequence
directly, this issue probably would go away.
Reported-and-bisected-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression
that is causing accesses to the file-system on the eMMC to fail. Errors
such as the following have been observed ...

 mmc2: running CQE recovery
 mmc2: mmc_select_hs400 failed, error -110
 print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700
 mmc2: cqhci: CQE failed to exit halt state

For now disable CQE support for Tegra186 until this issue is resolved.

Fixes: dfd3cb6f arm64: tegra: Add CQE Support for SDMMC4
Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.1:
 - Correct phy mode setting of imx6dl-yapp4 board to fix a problem
   caused by commit 5ecdd77c ("net: dsa: qca8k: disable delay
   for RGMII mode").
 - Add a missing of_node_put call to fix leaked reference detected by
   coccinelle in imx51 machine code.
 - Fix imx6q cpuidle driver bug which causes that CPU might not wake up
   at expected time.
 - Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
   transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
 - Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
 - Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
 - Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
 - Update PWM driver options in imx defconfig files due to the change
   on driver part.

* tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v4_v5_defconfig: enable PWM driver
  ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
  ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
  ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
  ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
  ARM: dts: pfla02: increase phy reset duration
  ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
  ARM: imx51: fix a leaked reference by adding missing of_node_put
  ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port

This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1,
please pull the following:

- Eric provides fixes for the bcm2835-pm driver: added missing depends
  on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error
  paths on initialization and fixing the PM_IMAGE_PERI power domain

* tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux:
  arm64: bcm2835: Add missing dependency on MFD_CORE.
  soc: bcm: bcm2835-pm: Fix error paths of initialization.
  soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.

This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.1, please pull the following:

- Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi
  model B revision 2

* tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm283x: Fix hdmi hpd gpio pull

The SPI DT bindings are for historical reasons a pitfall,
the ability to flag a GPIO line as active high/low with
the second cell flags was introduced later so the SPI
subsystem will only accept the bool flag spi-cs-high
to indicate that the line is active high.

It worked by mistake, but the mistake was corrected
in another commit.

The comment in the DTS file was also misleading: this
CS is indeed active high.

Fixes: cffbb02d ("ARM: dts: nomadik: Augment NHK15 panel setting")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes

Renesas ARM Based SoC Fixes for v5.1

R-Car Gen3 E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs:
* Correct SCIF5 DMA channels

* tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
  arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels

allnoconfig build with just ARCH_DAVINCI enabled
fails because drivers/clk/davinci/* depends on
REGMAP being enabled.

Fix it by selecting REGMAP_MMIO when building in
DaVinci support.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Andreas reported that he was seeing the tdbtorture test fail in some
cases with -EDEADLCK when it wasn't before. Some debugging showed that
deadlock detection was sometimes discovering the caller's lock request
itself in a dependency chain.

While we remove the request from the blocked_lock_hash prior to
reattempting to acquire it, any locks that are blocked on that request
will still be present in the hash and will still have their fl_blocker
pointer set to the current request.

This causes posix_locks_deadlock to find a deadlock dependency chain
when it shouldn't, as a lock request cannot block itself.

We are going to end up waking all of those blocked locks anyway when we
go to reinsert the request back into the blocked_lock_hash, so just do
it prior to checking for deadlocks. This ensures that any lock blocked
on the current request will no longer be part of any blocked request
chain.

URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975
Fixes: 5946c431 ("fs/locks: allow a lock request to block other requests.")
Cc: stable@vger.kernel.org
Reported-by: Andreas Schneider <asn@redhat.com>
Signed-off-by: Neil Brown <neilb@suse.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf 2019-03-24

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) libbpf verision fix up from Daniel.

2) fix liveness propagation from Jakub.

3) fix verbose print of refcounted regs from Martin.

4) fix for large map allocations from Martynas.

5) fix use after free in sanitize_ptr_alu from Xu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
First one is fixing version in Makefile and shared object and
second one clarifies bump in version. Thanks!

v1 -> v2:
  - Fix up soname, thanks Stanislav!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The current documentation suggests that we would need to bump the
libbpf version on every change. Lets clarify this a bit more and
reflect what we do today in practice, that is, bumping it once per
development cycle.

Fixes: 76d1b894 ("libbpf: Document API and ABI conventions")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Even though libbpf's versioning script for the linker (libbpf.map)
is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has
not been updated along with it and is therefore still on 0.0.1.

While fixing up, I also noticed that the generated shared object
versioning information is missing, typical convention is to have
a linker name (libbpf.so), soname (libbpf.so.0) and real name
(libbpf.so.0.0.2) for library management. This is based upon the
LIBBPF_VERSION as well.

The build will then produce the following bpf libraries:

  # ll libbpf*
  libbpf.a
  libbpf.so -> libbpf.so.0.0.2
  libbpf.so.0 -> libbpf.so.0.0.2
  libbpf.so.0.0.2

  # readelf -d libbpf.so.0.0.2 | grep SONAME
  0x000000000000000e (SONAME)             Library soname: [libbpf.so.0]

And install them accordingly:

  # rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install

  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...                           bpf: [ on  ]

    CC       /tmp/bld/libbpf.o
    CC       /tmp/bld/bpf.o
    CC       /tmp/bld/nlattr.o
    CC       /tmp/bld/btf.o
    CC       /tmp/bld/libbpf_errno.o
    CC       /tmp/bld/str_error.o
    CC       /tmp/bld/netlink.o
    CC       /tmp/bld/bpf_prog_linfo.o
    CC       /tmp/bld/libbpf_probes.o
    CC       /tmp/bld/xsk.o
    LD       /tmp/bld/libbpf-in.o
    LINK     /tmp/bld/libbpf.a
    LINK     /tmp/bld/libbpf.so.0.0.2
    LINK     /tmp/bld/test_libbpf
    INSTALL  /tmp/bld/libbpf.a
    INSTALL  /tmp/bld/libbpf.so.0.0.2

  # ll /usr/local/lib64/libbpf.*
  /usr/local/lib64/libbpf.a
  /usr/local/lib64/libbpf.so -> libbpf.so.0.0.2
  /usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2
  /usr/local/lib64/libbpf.so.0.0.2

Fixes: 1bf4b058 ("tools: bpftool: add probes for eBPF program types")
Fixes: 1b76c13e ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>